Penerangan
1.Product model
Model: DH01R-4W-26K
Applicable equipment:various industrial equipment
2.Product accessories diagram
Catatan: You can choose one of the three antennas. The suction cup antenna is standard by default.
3.Product model description
Catatan:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.
②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, with a range of 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.
④Analog input, ranging from 1 to 2, indicating that there are 1 to 2 analog inputs(maximum 2 saluran); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, dan lain-lain.) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)
These two analog quantities can be used as displays for welding current and welding voltage.
4.ciri-ciri
1）Maximum 26 Pengendali kimpalan dan kimpalan automasi mesin kimpal. Gulung Pusing 1. Menggunakan teknologi penghantaran lompat frekuensi;
2）Maximum 4 channels of analog 0-10V output (display range can be customized): supports 2 channels of extended isolated digital potentiometer output;
3）2 analog inputs; and displayed on the remote control, the display range can be customized
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 Bateri AA, low power consumption design;
6） Wireless operation distance is 200 meter;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.
5.Remote control switch description
6.Display content introduction
W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)
Low voltage: The remote control battery is too low, please replace the battery.
Network dropped: The wireless signal is interrupted. Please check the power of the receiver, power it on again, and restart the remote control.
7.Remote control function operation instructions
1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, turn on the power switch, dan paparan menunjukkan nilai,menunjukkan permulaan yang berjaya. Lampu penunjuk kerja penerima menjadi pepejal.
2）Fungsi suis dan butang
Sebarang operasi suis pusing dan butang pada alat kawalan jauh boleh mengawal titik output isyarat suis yang sepadan pada penerima. Semua titik output isyarat suis pada penerima biasanya adalah isyarat terbuka secara lalai;
3）W1-W4 pelarasan kelajuan
Putar tombol dalam W1-W4 sewenang-wenangnya untuk mengendalikan isyarat keluaran analog atau isyarat potensiometer yang sepadan pada hujung penerima. Isyarat keluaran analog pada hujung penerima lalai kepada isyarat voltan 0-10V, dan isyarat potensiometer menjadi lalai kepada 0-5K;
4） Fungsi berhenti kecemasan
Apabila butang berhenti kecemasan ditekan, semua output isyarat suis diputuskan dan output analog diputuskan; selepas hentian kecemasan dilepaskan, semua isyarat suis dipulihkan dan output analog dipulihkan; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Exit the parameter menu: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 to 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 to 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 to 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 to 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;
8.Remote control electrical characteristics
9.Remote control size
The final interpretation right of this product belongs only to our company.
Ulasan
Belum ada ulasan.