DWGP Handwheel Elektronik Tanpa Wayar

Penerangan

 

1.Pengenalan Produk

Handwheel elektronik tanpa wayar digunakan untuk panduan manual, kedudukan, tool setting and
other operations of CNC machine tools. Produk ini mengguna pakai teknologi penghantaran tanpa wayar,
menghapuskan sambungan wayar musim bunga tradisional, mengurangkan kegagalan peralatan yang disebabkan oleh kabel,
eliminating the disadvantages of cable dragging, oil stains, etc., and is more convenient to
operate. It is widely used in CNC machine tools such as gantry machining centers, gantry
vertical lathes, CNC gear processing machines, and can be adapted to a variety of CNC
systems on the market, such as Siemens, Mitsubishi, Fanuc, syntec and other CNC system
brands.

2.Ciri -ciri produk

1. Mengamalkan teknologi komunikasi tanpa wayar 433MHz, Jarak operasi tanpa wayar adalah 80 meter;
2. Mengamalkan fungsi melompat frekuensi automatik, gunakan 32 sets of wireless remote controllers at the
same time without affecting each other;
3. Sokong butang berhenti kecemasan, and after the handwheel is turned off, the emergency stop
button is still valid;
4. Sokongan 6 butang tersuai, Tukar output isyarat IO;
5. Sokongan kawalan 6-paksi, 7-12 Kawalan paksi dapat disesuaikan;
6. Menyokong 1x,10X, 100Kawalan x dan boleh disesuaikan maksimum 1000x;
7. Supports the enable button function, output switch l0 sianals. Pemilihan paksi,maanification
and encoder.;
8. Support axis selection and magnification selection encoder output;
9. Menyokong pengecasan Type-C standard, 5Spesifikasi Pengisian V-2A, built-in battery specification
14500/1100mAh.

3.Spesifikasi produk

 

4.Pengenalan Fungsi Produk

 

Nota：
①Emergency Stop Button：
When the emergency stop button is pressed, the two emergency stop IO outputs on
the receiver are disconnected, and all handwheel functions are invalid. When the emergency
stop is released, the emergency stop IO output on the receiver is closed, and all handwheel
functions are restored; and after the handwheel is turned off, the emergency stop IO output
of the receiver is still valid when the emergency stop button is pressed.

②Enable button:
Press any one of the enable buttons on both sides, and the two groups of enable IO
outputs on the receiver will be turned on. Release the enable button and the enable IO
output will be turned off. In addition, you need to press and hold the enable button before
switching the axis selection ratio and shaking the handwheel. This function can be
canceled through the configuration software.
③Axis selection switch (power switch):
Press and hold the enable button and switch the axis selection switch to switch the
moving axis controlled by the handwheel. Switch this switch from OFF to any axis and
turn on the handwheel power.

④Pulse encoder:
Tekan dan tahan butang Enable dan goncang pengekod nadi untuk menghantar nadi
isyarat untuk mengawal pergerakan paksi mesin.

⑤Battery indicator:
The hand wheel power display, all bright means full power, all off means it is not
turned on or has no power, the first left grid flashes, indicating that the power is too low,
please charge in time.
⑥Signal Lights:
If the signal light is on, it means the handwheel is being operated and the signal is
normal; if the signal light is off, it means there is no operation, or it is being operated but
the wireless signal is not connected.

5.Rajah Aksesori Produk

 

6.Panduan Pemasangan Produk

6.1 Langkah pemasangan produk
1. Install the receiver in the electrical cabinet using the clips on the back, or install it in
the electrical cabinet using the screw holes at the four corners of the receiver.
2.Rujuk rajah pendawaian penerima kami, Bandingkan dengan peralatan di tempat anda, dan berhubung
peralatan ke penerima melalui kabel.
3.Selepas penerima diperbaiki, antena yang dilengkapi dengan penerima mesti dihubungkan,
dan hujung luar antena mesti dipasang atau diletakkan di luar kabinet elektrik. Ia
is recommended to place it on the top of the electrical cabinet for the best signal effect. It is
forbidden to leave the antenna unconnected or place the antenna inside the electrical cabinet,
yang boleh menyebabkan isyarat tidak dapat digunakan.
4. Akhirnya, Hidupkan suis kuasa tangan dan anda boleh mengendalikan mesin dengan
Kawalan jauh tangan.

6.2 Dimensi pemasangan penerima

6.3 Rajah rujukan pendawaian penerima

7.Arahan Operasi Produk
1. The machine is powered on, the receiver is powered on, the receiver working indicator
light flashes, the wireless electronic handwheel has the battery installed, the battery cover
is fastened, the wireless electronic handwheel power switch is turned on, dan yang
handwheel power light is on;
2. Select the coordinate axis: Press and hold the enable button, switch the axis selection
suis, and select the axis you want to operate on;
3. Select magnification: Press and hold the enable button, switch the magnification switch,
and select the magnification level you need;
4. Moving axis: Press and hold the enable button, select the axis selection switch, pilih
the magnification switch, and then rotatethe pulse encoder to rotate the positive moving axis
clockwise and the negative moving axis counterclockwise;
5. Press and hold any custom button, and the corresponding button IO output of the
receiver will be turned on. Release the button to turn off the output;
6. Tekan butang berhenti kecemasan, the corresponding emergency stop IO output of the
receiver is disconnected, the handwheel function is disabled, release the emergency stop
button, the emergency stop IO output is closed, and the handwheel function is restored;
7. If the handwheel is not operated for a period of time, it will automatically enter sleep
mode to reduce power consumption. When it is used again, the handwheel can be
activated by pressing the enable button;
8. If the handwheel is not used for a long time,it is recommended to switch the handwheel
shaft to the OFF position, turn off the handwheel power, and extend the battery life.

8.Product Model Description

① ：DWGP represents the appearance style

② ：Pulse output parameters:
01: Indicates that the pulse output signals are A and B, and the pulse voltage is 5V; Pulse
quantity 100PPR;
02: Indicates that the pulse output signals are A and B, and the pulse voltage is 12V; Pulse
quantity 25PPR;
03: Indicates that the pulse output signal is A B、A-、B-； Pulse voltage 5V; Pulse quantity 1
00PPR;
04: Indicates a low-level NPN open circuit output, with pulse output signals of A and B; the
number of pulses is 100PPR;05: Indicates high-level PNP source output, pulse output signals
are A and B; pulse quantity is 100PPR;
③ : represents the number of axis selection switches, 6 represents 6 paksi, 7 represents 7 paksi.
④ : represents the type of axis selection switch signal, A represents point-to-point output signal,
B represents encoded output signal;

⑤ : represents the type of magnification switch signal,
A represents point-to-point output signal, B represents encoded output signal;
⑥ : represents the number of custom buttons, 6 represents 6 butang tersuai;
⑦ : represents the power supply for the system handwheel, 05 represents 5V power supply,
dan 24 represents 24V power supply.

9.Penyelesaian Masalah Produk

 

10. Penyelenggaraan dan penjagaan

1. Sila gunakannya dalam persekitaran yang kering pada suhu bilik dan tekanan untuk melanjutkan hayat perkhidmatannya;
2. Sila elakkan menggunakan persekitaran yang tidak normal seperti gelembung hujan dan air untuk melanjutkan hayat perkhidmatan;
3. Please keep the appearance of the handwheel clean to extend its service life;
4. Tolong elakkan memerah, jatuh, bumping, dll. to prevent damage to the precision components inside
the handwheel or accuracy errors;
5. Sekiranya tidak digunakan untuk masa yang lama, Sila simpan roda tangan di tempat yang bersih dan selamat;
6.Semasa penyimpanan dan pengangkutan, Perhatian harus dibayar kepada kelembapan dan rintangan kejutan.

11.Maklumat keselamatan

1. Sila baca arahan dengan teliti sebelum menggunakan dan melarang bukan profesional dari beroperasi;
2. When the battery level is too low, please charge it in time to avoid errors caused by insufficient
battery and inability to operate the handwheel;

3. Sekiranya pembaikan diperlukan, Sila hubungi pengeluar. Sekiranya kerosakan disebabkan oleh pembaikan diri, Pengilang tidak akan memberikan jaminan.