1. 12 buttuni, 6 li minnhom jappoġġjaw sinjali I/O.
2. Jappoġġja skrin bil-kulur ta '2.8 pulzieri.
3. Jappoġġja swiċċ wieħed selettur tal-assi ta '9 livelli, appoġġ sa 6-assi output.
4. Jappoġġja swiċċ multiplikatur wieħed bi 3 livelli.
Kontroll mill-bogħod mingħajr fili għal Qtugħ bil-Lejżer 3D Ħames Assi：PHB06B-LASER
Deskrizzjoni
1.Introduzzjoni tal-Prodott
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, jappoġġja 12 buttuni, and supports real-time display of system coordinates and status.
2.Karatteristiċi tal-prodott
1. 12 buttuni, 6 li minnhom jappoġġjaw sinjali I/O.
2. Jappoġġja skrin bil-kulur ta '2.8 pulzieri.
3. Jappoġġja swiċċ wieħed selettur tal-assi ta '9 livelli, appoġġ sa 6-assi output.
4. Jappoġġja swiċċ multiplikatur wieħed bi 3 livelli.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5Speċifikazzjoni tal-iċċarġjar V-2A, built-in battery specifications 18650/12775mWh.
3.Prinċipju tax-xogħol
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
Nota: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.Speċifikazzjonijiet tal-Prodott
| Vultaġġ tal-provvista tal-enerġija riċevitur | DC5V-DC24V |
| Button lifespan | 1,000,000 drabi |
| Operating Temperature |
-25℃ < X < 55℃
|
| Safe drop height | 1 m |
| Receiver port | Ethernet |
| Number of buttons |
12
|
| Skrin tal-wiri |
2.8-inch color screen
|
| wireless communication frequency | 433MHz band |
| Receiver sensitivity |
-100DBM
|
| Handheld transmit power |
15DBM
|
| Distanza ta 'komunikazzjoni mingħajr fili | 100 meters barrier-free range |
| Rechargeable Battery Specification | Rechargeable Battery Specification |
| Charging base power supply voltage | DC24V/1A |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.Introduzzjoni tal-funzjoni tal-prodott
Noti:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 buttuni
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 impulsi għal kull rivoluzzjoni.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
9. Test Instructions
10. Installation dimensions
Dimensjonijiet ta 'installazzjoni tar-riċevitur
Unit: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. Jekk jogħġbok użah f'ambjent xott f'temperatura tal-kamra u pressjoni biex testendi l-ħajja tas-servizz tagħha.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, eċċ. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.Informazzjoni dwar is-sigurtà
1. Jekk jogħġbok aqra l-istruzzjonijiet bir-reqqa qabel l-użu u tipprojbixxi mhux professjonisti milli joperaw.
2. If you repair it yourself and cause damage, the warranty will be void.
