1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 miters.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, axis selection, magnification, and other information.
3. Tappoġġja l-buttuna ta 'waqfien ta' emerġenza, swiċċ output tas-sinjal io, and the hand wheel shutdown emergency stop is still valid.
4. Jappoġġja 6 buttuni tad-dwana, switch IO signals, and can output signals to the system through IO wiring or communication.
Manwal tal-Istruzzjoni tal-handwheel elettroniku bil-fili
Deskrizzjoni
1. Introduzzjoni tal-Prodott
Electronic handwheel is used for manual guidance, pożizzjonament, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, magnification, buttons, andother signals through communication.
2.Karatteristiċi funzjonali tal-prodott
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 miters.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, axis selection, magnification, and other information.
3. Tappoġġja l-buttuna ta 'waqfien ta' emerġenza, swiċċ output tas-sinjal io, and the hand wheel shutdown emergency stop is still valid.
4. Jappoġġja 6 buttuni tad-dwana, switch IO signals, and can output signals to the system through IO wiring or communication.
5. Jappoġġja 6 or 8 Kontroll tal-assi, with switch IO signals that can be output to the system through IO wiring or communication.
6. Jappoġġja 3 or 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 pulses/turn, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.
3. Speċifikazzjonijiet tal-prodott
| Handwheel working power supply voltage | DC24V/1A |
| Vultaġġ tal-provvista tal-enerġija riċevitur | DC24V/1A |
| Receiver IO output load range | DC24V |
| Hand wheel end cable length | 10m |
| Receiver end cable length | 1m |
| Receiver end network cable length | 3m |
| Operating temperature | -25℃<X<55℃ |
| Anti-fall height | 1m |
| Custom Button Quantity | 6 |
| Product dimensions | 233*90.7*77.4（mm） |
4.Product function introduction
Nota:
Emergency stop button:
Agħfas il-buttuna ta 'waqfien ta' emerġenza, u ż-żewġ settijiet ta 'outputs ta' waqfien ta 'emerġenza fuq ir-riċevitur jiġu skonnettjati, u l-funzjonijiet kollha tal-handwheel se jkunu invalidi.
After releasing the emergency stop, the emergency stop IO output on the receiver is closed, and all functions of the handwheel are restored.
② Screen display:
PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 buttuni tad-dwana, kull wieħed jikkorrispondi għal punt ta 'ħruġ IO fuq ir-riċevitur, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Agħfas u żomm il-buttuna Enable, ħawwad il-encoder tal-polz, Emit sinjal tal-polz, and control the movement of the machine axis.
⑧ Handwheel cable:
Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.
5. Dijagramma Aċċessorja tal-Prodott
6. Gwida għall-Installazzjoni tal-Prodott
6.1 Passi ta 'installazzjoni tal-prodott
6.1 Passi ta 'installazzjoni tal-prodott
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Irreferi għad-dijagramma tal-wajers tar-riċevitur tagħna u qabbelha mat-tagħmir tiegħek fuq il-post. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.
6.2 Dimensjonijiet ta 'installazzjoni tar-riċevitur
6.3 Installation dimensions of aviation plugs
6.4 Dijagramma ta 'referenza tal-wajers tar-riċevitur
7.Product Operation Instructions
7.Product Operation Instructions
1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.
2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.
3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.
4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Agħżel ingrandiment: Switch the magnification switch and select the magnification level you need.
7. Assi li jiċċaqlaq: Agħfas u żomm il-buttuna Enable, Agħżel is-swiċċ tal-għażla tal-assi, Agħżel is-swiċċ tal-ingrandiment, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Agħfas il-buttuna ta 'waqfien ta' emerġenza, L-output tal-IO ta 'Emerġenza Korrispondenti tar-riċevitur se jkun skonnettjat, Il-funzjoni tal-handwheel se tkun diżattivata, Irrilaxxa l-buttuna ta 'waqfien ta' emerġenza, Il-ħruġ ta 'IO ta' waqfien ta 'emerġenza se jkun magħluq, u l-funzjoni tal-handwheel se tiġi rrestawrata.
8.Deskrizzjoni tal-Mudell tal-Prodott
① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : represents the number of axis selection switches, represents axes, and represents
assi.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, u B jirrappreżenta sinjal tal-ħruġ ikkodifikat.
9.Product trouble shooting
10.Maintenance
1. Jekk jogħġbok użah f'ambjent xott f'temperatura tal-kamra u pressjoni biex testendi l-ħajja tas-servizz tagħha.
2. Jekk jogħġbok evita li tuża f'ambjenti anormali bħalma huma x-xita u l-bżieżaq tal-ilma biex testendi l-ħajja tas-servizz.
3. Jekk jogħġbok żomm id-dehra tal-handwheel nadif biex testendi l-ħajja tas-servizz tagħha.
4. Jekk jogħġbok evita li tagħfas, jaqa ', bumping, eċċ. Biex tevita ħsara lill-komponenti ta 'preċiżjoni ġewwa l-handwheel jew żbalji ta' eżattezza.
5. Jekk ma jintużax għal żmien twil, please store the handwheel in a clean and safe place.During storage and transportation, Għandha tingħata attenzjoni lill-umdità u r-reżistenza tax-xokk.
11. Informazzjoni dwar is-sigurtà
1. Jekk jogħġbok aqra l-istruzzjonijiet bir-reqqa qabel l-użu u tipprojbixxi mhux professjonisti milli joperaw.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Jekk hija meħtieġa t-tiswija, Jekk jogħġbok ikkuntattja lill-manifattur. Jekk il-ħsara hija kkawżata minn tiswija personali, Il-manifattur ma jipprovdix garanzija
