2. Product features
1. siv 433MHZ wireless kev sib txuas lus thev naus laus zis, Wireless kev khiav hauj lwm nrug yog 100 meters.
2. Adopt automatic frequency hopping function, use 32 sets of wireless remote controllers at the same time, without affecting each other.
3. Support all inverters with 485-Modbus RTU protocol. The inverter brands that have been adapted include:Shanghai Xielin, Fuji, Inovance, Zhongchen, INVT, Anchuanda. If the brand is not ada please contact us for customization.
4. Support large motor inverter start, speed regulation, and current reading.
5. Support left and right crawler inverter speed regulation, start, front and back left and right control.
6. Support left and right crawler inverter straight line correction to keep the machine moving in a straight line.
7. Support rope saw automatic cutting function, automatically adjust the left and right crawler speed in real time according to the large motor current information.
8. At the same time, it is compatible with direct IO output to control the start and stop of the motor, and analog voltage output to control the motor speed.

3. Cov khoom lag luam specifications

4. Khoom muaj nuj nqi taw qhia

Cov ntawv ceeb toom:
①Screen display:

②Mode switch:
Using a 2-level switch, it is possible to switch between automatic and manual modes, and the corresponding mode will be displayed on the screen for switching.
③ Enable:
Combination buttons, Qee qhov kev ua haujlwm yuav tsum tau nias thiab tuav lub pob kom ua haujlwm., please refer to the instructions for each switch for details.
(4) Lub cev muaj zog loj hloov.:
Siv 3-ceev pib dua hloov., Rub qhov hloov no tswj kev sib hloov rau pem hauv ntej thiab rov qab ntawm lub cev muaj zog loj.. After releasing it, Lub xeev yuav raug tswj hwm., Cov cim sib xws yuav tshwm sim ntawm lub vijtsam.. Tus xub '↑' qhia txog kev tig mus rau pem hauv ntej., and the y arrow indicates reverse rotation.
(5) Lub cev muaj zog me me rau pem hauv ntej / rov qab hloov.:
Siv 3-ceev nws tus kheej xauv hloov., Rub qhov hloov no tswj lub cev muaj zog me me kom txav mus rau pem hauv ntej thiab rov qab.. Cov zaub sib xws yuav tshwm rau ntawm lub vijtsam., with the t arrow indicating forward and the ↓ arrow indicating backward.
(6) Cov chaw taws teeb tswj fais fab hloov.:
The remote control display screen is turned on.
⑦ small motor turning switch:
Siv 3-ceev pib dua hloov., when manually operated, the small motor can be controlled to turn left or right. Once released, the remote control will automatically stop this action.When in the forward state, turn this switch and the corresponding display will appear on the screen.The + arrow indicates left turn, and the – arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen.The + arrow indicates left turn, and the – arrow indicates right turn.Press and hold the enable button, then turn this switch to perform a stationary turning function, making the turn faster.
⑧ Large motor speed regulation:
Using a multi turn encoder knob, rotate the knob to adjust the speed S1 of the large motor For every 1 grid rotation, the speed value of the large motor changes by approximately 0.2 units, and rapid rotation can quickly modify the speed value of the large motor.
9 Small motor speed regulation (linear correction):To use the multi turn encoder knob, in manual mode, for every 1 turn of the knob, the speed value of the small motor changes by approximately 0.1 units. Fast rotation can quickly modify the speed value of the small motor.
In automatic mode, press the enable button and rotate 1 grid each time. The speed limit value F of the small motor changes by approximately 0.1 units. Rapid rotation can quickly modify the speed limit value of the small motor.Press the enable button, turn the knob to the right, and the straight line correction display shows D f: left. Each rotation of the knob increases by 1 unit; Turn left knob, straight line correction display: Df: right. Each rotation of the knob increases by 1 unit, and each correction unit corresponds to a motor speed control AVI voltage of about 0.02 V.

5. Product accessory diagram

6. Product Installation Guide
6.1 Cov kauj ruam ntawm cov khoom lag luam
1. Install the receiver in the electrical cabinet through the buckle on the back, or install it in the electrical cabinet through the screw holes at the four corners of the receiver.
2. Xa mus rau peb daim duab receiver xaim hluav taws xob, compare your on-site equipment, and connect the equipment to the receiver through wires.
3. Tom qab lub receiver yog ruaj ntseg, lub kav hlau txais xov uas los nrog lub receiver yuav tsum tau txuas nrog, thiab sab nraud kawg ntawm lub kav hlau txais xov yuav tsum tau ntsia los yog positioned sab nraum lub txee hluav taws xob. It is recommended to place it on the top of the electrical cabinet for the best signal effect. It is forbidden to leave the antenna unconnected or place the antenna inside the electrical cabinet, which may cause poor signal and unusable.
4. Finally, install the battery in the remote control, tighten the battery cover, and then turn on the power switch of the remote control. After the remote control display shows the normal working interface, you can perform remote control operation.

6.2 Receiver installation dimensions

6.3 Receiver Wiring Reference Diagram

7. Product operation instructions
7.1 Remote Control Parameter Settings
How to enter the background parameters of the remote controller: turn the mode switch to manual mode, adjust the speed of the small motor to 25, or 0, 10, 20, 40, 50, and turn the forward switch of the large motor upwards 3 times and downwards 3 times;
Use the “Small Motor Speed Control” knob to turn the page, press Enable and turn the small motor speed control knob to modify the parameters; after modification, turn the page to the end, select Save and Exit, and press the Enable button to exit the menu;

The parameters are as follows:Maximum current: large motor current feedback value range, setting range 15-200A, default 60;

Speed control parameters: automatic mode small motor automatic acceleration speed, the smaller the faster, setting range 200-1500, default 1000;

Deceleration parameter: Set the upper limit of the motor speed change allowed. When the current changes beyond this value, it will decelerate. The smaller it is, the faster the left and right motors will decelerate. The range is 05-12, and the default is 06;

Acceleration a1: The larger the value, the faster the motor speed increases, range 00-06,default 01; Deceleration a2: The larger the value, the faster the motor speed decreases, range 00-06, default 02;

Enable speed regulation: Whether the small motor speed regulation needs to be enabled, 00 is not enabled, 01 is enabled, default 01;

Startup self-locking: Whether the large motor will automatically keep self-locking after the forward and reverse switch is released, 00 tsis raug tswj hwm, 01 yog tswj hwm, default 01;

Siab tshaj plaws mus ncig: Siab tshaj plaws ceev ntawm sab laug thiab txoj cai lub cev muaj zog, range 10-100, default 50;

Txiav tam sim no: Qhov siab tshaj plaws txiav tam sim no, qhov screen qhia IC tus nqi, range 15-160, default 30, qhov screen qhia IC: 30. Qhov kev txwv sab sauv ntawm no parameter = qhov siab tshaj plaws tam sim no × 80%;

Lub neej ntawd ceev txwv: Lub neej ntawd tsis siv neeg txiav ceev ntawm lub cev muaj zog me me thaum pib, range 00-100, default 10, qhov screen qhia F1.0, this parameter is only accurate when the maximum travel is set to 50.

Wireless channel: Lub neej ntawd yog 10. Thaum lub teeb liab tswj cov chaw taws teeb tsis ruaj khov lossis muaj teeb liab cuam tshuam ntawm qhov chaw, koj tuaj yeem hloov qhov parameter no los hloov cov channel kom tsis txhob muaj kev cuam tshuam;

Kev txwv ceev offset: Qhov kev txwv sab sauv ntawm lub cev muaj zog me me tsis siv neeg txiav ceev,range 00-200, default 60, qhov screen qhia 6.0; Zaub tus nqi sab sauv txwv = ceev txwv offset × 0.1;

Siab tshaj plaws tus tswv tsev: Siab tshaj plaws ceev ntawm lub cev muaj zog loj, range 10-100, default 50;

Mbus ntaus ntawv ( yuav tsum tau ): large motor inverter model selection, range 00-03, default 03;

00- Shanghai Xielin 01 Fuji
02- INVT 03 Inovance（Zhongchen, Robicon）

SBUS equipment (yuav tsum tau): Small motor frequency converter model selection, range 00-05, default 03;
00- Shanghai Xielin 01 Fuji
02- INVT 03 Inovance（Zhongchen, Robicon）
04-Anchuanda 05-None

8. Product troubleshooting

7.2 Parameter setting of frequency converter
1. Command source selection: Communication command channel
2. Main frequency source selection: communication given
3. Baud rate: 19200
4. Data format: No verification, data format<8-N-1>
5. Local address: Set the left frequency converter to 1, the right frequency converter to 2, and the large motor frequency converter to 3

7.3 Remote Control Operation Instructions
1. Power on the machine, turn on the remote control, enter the remote control background, set the remote control background parameters, mainlyIt is to set the models of small and large motor frequency converters (skip this step if the machine manufacturer has already set them);
2. Set the parameters of the frequency converter (Hla cov kauj ruam no yog tias lub tshuab chaw tsim tshuaj paus twb tau teeb tsa nws);
3. Teeb tsa cov chaw taws teeb tswj mus rau phau ntawv hom, Tom qab ntawd siv cov chaw taws teeb tswj kom txav lub tshuab mus rau txoj haujlwm ua haujlwm;
4. Hauv phau ntawv hom, Teem tus nqi IC rau lub cev muaj zog loj txiav tam sim no thiab nws qhov nrawm;
5. Hloov mus rau hom tsis siv neeg thiab teeb tsa qhov kev txiav ceev ceev F tus nqi rau lub cev muaj zog me me;
6. In automatic mode, Tig lub cev muaj zog loj hloov mus rau pem hauv ntej los pib nws, Tom qab ntawd tig lub cev muaj zog me me hloov mus rau pem hauv ntej lossis rov qab. The remote control enters automatic cutting mode and begins cutting.

9.Kev saib xyuas
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Yog tias cov chaw taws teeb tsis siv ntev, please remove the battery and store the remote control and battery in a clean and safe place.
6.During storage and transportation, attention should be paid to moisture and shock resistance.

10. Safety Information
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by insufficient power, which may result in the remote control being unable to operate.
3. If repair is required, please contact the manufacturer. If the damage is caused by self repair, the manufacturer will not provide warranty

The remote control for automatic cutting of track car rope saw is suitable for track type rope saw
cutting machines. It uses the 485 Modbus RTU protocol to control the left and right track frequency
converters, as well as the large motor frequency conversion speed control start and the front, rear,
left and right direction controllers. And it can read the working current of the large motor frequency
converter through the 485 Modbus RTU protocol. By analyzing and comparing the current of the
large motor, the speed of the left and right tracks can be automatically adjusted in real time to
achieve automatic cutting function.

2. Product functional features

1. Adopting 433MHz wireless communication technology, with a wireless operating distance of 100 meters.
2. Adopt automatic frequency hopping function and use 32 sets of wireless remote controllers
simultaneously, without affecting each other.
3. Supports all frequency converters with 485 Modbus RTU protocol, and currently compatible frequency
converter brands include:Shanghai Xielin, Fuji, Huichuan, Zhongchen, INVT, and . For brands
that are not compatible, please contact us for customization.
4. Support speed regulation, starting, and current reading of large motor frequency converters.
5. Support left and right track frequency converter speed regulation, starting, front, back, left and right control.
6. Support linear correction of left and right track frequency converters to keep the machine walking in a
straight line.
7. Support automatic cutting function of rope saw, automatically adjust the left and right track speed in
real time according to the current information of the large motor.
8. It is also compatible with direct IO output control for motor start and stop, and analog voltage output
control for motor speed.

3. Cov khoom lag luam specifications

4. Product Function Introduction

Cov ntawv ceeb toom:
①Screen display:

②Mode switch:

③Enable:
Combination buttons, Qee qhov kev ua haujlwm yuav tsum tau nias thiab tuav lub pob kom ua haujlwm.,see the instructions for each switch for details.
④Large motor switch:
Siv 3-ceev pib dua hloov., Rub qhov hloov no tswj kev sib hloov rau pem hauv ntej thiab rov qab ntawm lub cev muaj zog loj.. After releasing it, Lub xeev yuav raug tswj hwm., Cov cim sib xws yuav tshwm sim ntawm lub vijtsam.. The S1↑ arrow indicates forward rotation, and the S1 ↓ arrow indicates everse rotation.
(5) Lub cev muaj zog me me rau pem hauv ntej / rov qab hloov.:
The small motor is equipped with a 3-speed self-locking switch in front of it. Pressing the enable button and pulling this switch can control the small motor to move forward and backward, and the corresponding display will appear on the screen.The ↑↑ arrow represents forward, and the ↓↓ arrow represents backward.
⑥ Straight line correction:
Using a multi turn encoder knob, press the enable button, turn the knob right, and display the straight line correction: Df: The left turn knob increases by 1 unit per rotation, and the left
motor speed increases by 0.1 unit; Turn left knob, straight line correction display: Df: On the right, every turn of the knob increases by 1 unit, and the speed of the right motor increases
by 0.1 unit.
⑦Small motor turning switch:
Siv 3-ceev pib dua hloov., when manually operated, the small motor can be controlled to turn left or right. Once released, the remote control will automatically stop this action. In the forward state, when this switch is turned, the corresponding display will appear on the screen. The ←↑ arrow indicates left turn, and the ↑→ arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen. The ←↓ arrow indicates left turn, and the ↓→ arrow indicates right turn.
⑧ Large motor speed regulation:
Using a multi turn encoder knob, rotating 1 grid each time, the speed value of the large motor changes by approximately 0.2 units. Fast rotation can quickly modify the speed value of the large motor.
⑨ Small motor speed regulation:
Using a multi turn encoder knob, in manual mode, press the enable button and then rotate one grid at a time，the speed value of the left and right small motors changes by about 0.1 units, and quick rotation can quickly modify the speed value of the small motor.In automatic mode, press the enable button and rotate one grid at a time,the speed limit value F of the small motor changes by approximately 0.1 units. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote control power switch
The remote control display screen is turned on.

5. Product accessory diagram

6. Product Installation Guide
6.1 Product installation steps
1. Install the receiver into the electrical cabinet through the buckle on the back, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the equipment to the receiver through wires.
3. After fixing the receiver, it is necessary to connect the antenna equipped with the receiver and install or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for the best signal effect. It is forbidden to leave the antenna unconnected or place it inside the electrical cabinet, as it may cause the signal to be unusable.
4. Finally, install the battery on the remote control, tighten the battery cover, and turn on the power switch of the remote control. After the remote control display screen shows the normal
working interface, remote control operations can be performed.

6.2 Receiver installation dimensions

6.3 Receiver Wiring Reference Diagram

7. Product operation instructions
7.1 Remote Control Parameter Settings
Method to enter the remote control backend parameters:

Turn the mode switch to manual mode, adjust the speed of the small motor to 25 on both sides, or 0, 10, 20, 40, 50 on all sides, and continuously turn the forward switch of the large motor up 3 times and down 3 times;
Use the “Small Motor Speed Control” knob to flip pages, press the enable button, and then turn the small motor speed control knob to modify parameters. After modification, turn the page to the end,select “Save” to exit, and press the enable button to exit the menu;
The parameters are as follows:
Maximum current: feedback range of large motor current, set range 15-200A, default 100;
Speed control parameters: Automatic mode, small motor automatically accelerates faster or slower,the smaller the faster, set range 200-1500, default 800;
Deceleration parameter: Set the upper limit that allows the motor speed to change. When the current changes beyond this value, the deceleration will occur. The smaller, the faster the deceleration of the left and right motors, with a range of 05-12 and a default of 06;
Acceleration a1: The larger the motor speed, the faster it increases, with a range of 00-06 and a default of 01;
Deceleration a2: The larger the motor speed, the faster it decreases, with a range of 00-06 and a default of 02;
Enable speed regulation: Does the small motor speed regulation need to be enabled? 00 does not enable, 01 enables, default is 01;
Start self-locking: Does the large motor automatically maintain self-locking after the forward and reverse switches are released? 00 does not hold, 01 holds, default 01
Maximum walking: maximum speed of left and right motors, range 10-100, default 50;
Txiav tam sim no: maximum cutting current, displayed on the screen as IC value, range 15-160, default 30,
corresponding to IC: 30 displayed on the screen. The upper limit of this parameter is 80% of the maximum current;
Lub neej ntawd ceev txwv: The default small motor automatic cutting speed when turned on is within the range of 0-100, with a default of 10. The screen displays F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Automatic mode: Set to 00, the automatic/manual switch is a mode switch. Set to 01, the automatic/manual switch is set to the automatic position, the display screen shows lighting, and the automatic terminal output on the receiver is closed. When set to manual, the automatic output terminal is disconnected;
Speed limit deviation: The upper limit of the automatic cutting speed of the small motor ranges from 00 to 200, with a default of 60 and a corresponding display of 6.0 on the screen; Upper limit of display value=speed limit offset x 0.1;
Siab tshaj plaws tus tswv tsev: maximum speed of the large motor, range 10-100, default 50;
Mbus equipment (yuav tsum tau): Selection of large motor frequency converter model, range 00-03, default 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）
SBUS equipment (yuav tsum tau): Small motor frequency converter model selection, range 00-05, default 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）

04-Anchuanda 05-None

7.2 Parameter setting of frequency converter
1. Command source selection: Communication command channel
2. Main frequency source selection: communication given
3. Baud rate: 19200
4. Data format: No verification, data format<8-N-1>
5. Local address: Set the left frequency converter to 1, the right frequency converter to 2, and
the large motor frequency converter to 3
7.3 Remote Control Operation Instructions
1. Power on the machine, turn on the remote control, enter the remote control backend, set the
remote control backend parameters, mainly setting the small motor and large motor frequency
converter models: (Hla cov kauj ruam no yog tias lub tshuab chaw tsim tshuaj paus twb tau teeb tsa nws);
2. Set the parameters of the frequency converter (skip this step if the machine manufacturer
has already set it);
3. Teeb tsa cov chaw taws teeb tswj mus rau phau ntawv hom, and then use the remote control to move the machine to
the working position;
4. Hauv phau ntawv hom, set the cutting current of the large motor to IC and the speed of the large motor
5. Hloov mus rau hom tsis siv neeg thiab teeb tsa qhov kev txiav ceev ceev F tus nqi rau lub cev muaj zog me me;
6. In automatic mode, Tig lub cev muaj zog loj hloov mus rau pem hauv ntej los pib nws, then turn
the small motor switch to forward or reverse, and the remote control enters automatic cutting
mode to start cutting.

8.Product troubleshooting

9.Kev saib xyuas
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Yog tias cov chaw taws teeb tsis siv ntev, please remove the battery and store the remote control and battery in a clean
and safe place.
6.During storage and transportation, attention should be paid to moisture and shock resistance.

10. Safety Information
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by
insufficient power, which may result in the remote control being unable to operate.
3. If repair is required, please contact the manufacturer. If the damage is caused by self repair, the manufacturer
will not provide warranty.

Model: DH01R-4W-26K

Cov Khoom Siv Tau:various industrial equipment

2.Daim duab Khoom Accessories

Ceeb toom: Koj tuaj yeem xaiv ib qho ntawm peb lub kav hlau txais xov. The suction cup antenna is standard by default.

3.Product model description

Ceeb toom:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.

②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, with a range of 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.

④Analog input, ranging from 1 to 2, indicating that there are 1 to 2 analog inputs(maximum 2 channels); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, thiab lwm yam) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Nta

1）Maximum 26 relay outputs;
2）Maximum 4 channels of analog 0-10V output (display range can be customized): supports 2 channels of extended isolated digital potentiometer output;
3）2 analog inputs; and displayed on the remote control, the display range can be customized
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 AA roj teeb, low power consumption design;
6） Wireless operation distance is 200 meters;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.

5.Cov Chaw Taws Teeb Tswj Hloov Lus Piav Qhia

6.Display content introduction

W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)

Tsawg voltage: Cov chaw taws teeb tswj roj teeb tsawg dhau, please replace the battery.

Network Disconnected: Wireless teeb liab cuam tshuam. Thov xyuas lub hwj chim receiver, Fais fab nws dua, and restart the remote control.

7.Cov Lus Qhia Txog Kev Ua Haujlwm Chaw Taws Teeb Tswj

1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, turn on the power switch, and the display shows a value,indicating successful startup. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
When the emergency stop button is pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Tawm ntawm cov ntawv qhia zaub mov parameter: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 to 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 to 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 to 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 to 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;

8.Cov yam ntxwv hluav taws xob ntawm cov chaw taws teeb tswj

9.Chaw taws teeb tswj qhov ntev

The final interpretation right of this product belongs only to our company.

Model: DH12S-P6S

Cov Khoom Siv Tau:Hlau Kaw / Hniav Kaw Tshuab

2.Daim duab Khoom Accessories

Ceeb toom: Koj tuaj yeem xaiv ib qho ntawm peb lub kav hlau txais xov. The suction cup antenna is standard by default.

3.Cov Chaw Taws Teeb Tswj Hloov Lus Piav Qhia

4.Qhia Cov Ntsiab Lus Qhia

Lub Ntsiab Lub Cev Muaj Zog Ceev: Lub Ntsiab Loj: 0-50
Mus Ncig Lub Cev Muaj Zog Ceev: Kab: 0-50
Siab tshaj plaws ceev txwv ntawm tsis siv neeg txiav lub cev muaj zog: ceev: 0-30
(Adjustable ntsuas)
Tsis siv neeg txiav lub ntsiab lub cev muaj zog teeb tam sim no: chaw: 28 (Adjustable ntsuas)
Viav vias caj npab lub cev muaj zog ceev: viav vias: 0-50

Tsawg voltage: Cov chaw taws teeb tswj roj teeb tsawg dhau, please replace the battery.

Network Disconnected: Wireless teeb liab cuam tshuam. Thov xyuas lub hwj chim receiver, Fais fab nws dua, and restart the remote control.

5.Cov Lus Qhia Txog Kev Ua Haujlwm Chaw Taws Teeb Tswj

1Tig Rau Cov Chaw Taws Teeb Tswj

When the receiver is powered on, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; install two AA batteries in the remote control, turn on the power switch, and the display will show the motor speed, indicating successful startup.

2）Large motor and speed regulation/Main motor and speed regulation

Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to forward, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to reverse, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Rotate the “big motor” Pob khawm los kho qhov kev tswj hwm ceev ntawm lub receiver lub ntsiab lub cev muaj zog inverter los ntawm 0 txog 10V;

3）Traveling motor

Press and hold “Speed Adjustment Enable”, turn the “Forward/Reverse” switch to forward or backward, and the walking motor will move at a high speed of 50;

4）Swing arm motor and speed regulation

Turn the “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;

Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” switch, the swing arm motor will move at a high speed of 50;

5）Travel motor speed limit adjustment

Press and hold the “speed adjustment enable” button and rotate the “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “rau pem hauv ntej / rov qab” hloov mus rau pem hauv ntej lossis rov qab mus rau hauv hom tsis siv neeg txiav hom;

7Parameter ntawv qhia zaub mov (cov neeg siv raug txwv tsis pub hloov kho nws yam tsis muaj kev tso cai)

Nkag mus rau cov ntawv qhia zaub mov parameter:Hauv phau ntawv hom, thaum lub cev muaj zog tseem ceeb yog 0, thawb qhov hloov mus rau pem hauv ntej / rov qab mus rau peb zaug hauv kab, thiab tom qab ntawd thawb nws hauv qab peb zaug hauv kab kom nkag mus rau hauv cov ntawv qhia zaub mov parameter;
Tawm ntawm cov ntawv qhia zaub mov parameter: Tig lub pob kho kom nrawm, xaiv txuag lossis tsis txuag, thiab nias lub pob kom paub meej;
Rated tam sim no: Tus nqi siab tshaj plaws ntawm lub cev muaj zog tseem ceeb tam sim no, chav tsev: Ampere;
Kev hloov kho ceev: Tsis siv neeg txiav tswj cov ntsuas, default 800, chav tsev: millisecond,kev hloov kho raug txwv;
Deceleration parameter: Thaum txiav tus nqi hloov tam sim no tshaj tus nqi no, nrawm nrawm pib, chav tsev: Ampere;
Acceleration a1: Thaum lub txiav tam sim no qis dua qhov teeb txiav tam sim no, the speed value increased by each acceleration of the walking motor;
Deceleration a2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, kev hloov kho raug txwv;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, kev hloov kho raug txwv;
Maximum current: The range of main motor feedback current, chav tsev: Ampere;
Siab tshaj plaws tus tswv tsev: Remote control main motor speed adjustment display range;
Maximum walking: Invalid parameter;
Kev txwv ceev offset: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Txo rhiab heev: Thaum lub cev muaj zog tseem ceeb lub tswv yim tam sim no txo, thiab txhua zaus qhov txo qis tshaj tus nqi no, Lub cev muaj zog taug kev qeeb qeeb;
Kev hloov kho rhiab heev: Ntxiv lossis rho tawm ntawm qhov rhiab heev parameter nce;
Teeb tsa tam sim no: Tsis siv neeg txiav, Threshold ntawm lub cev muaj zog lub tswv yim tam sim no. Yog tias tus nqi no dhau lawm,Lub cev muaj zog taug kev pib ua kom nrawm dua;Yog tias hauv qab no tus nqi, lub cev muaj zog taug kev pib nrawm nrawm;unit: Amperes;
Idle tawm: Thaum tsis siv neeg hom pib, yog tias lub ntsiab lub cev muaj zog tawm tswv yim tam sim no qis dua tus nqi no,nws tseem nyob hauv hom tsis muaj zog. Yog hais tias nws yog saum toj no tus nqi, nws tawm idle hom thiab nkag mus rau hauv kev txiav hom. Chav tsev yog amperes;
Tsis muaj load tam sim no:Thaum tsis siv neeg hom pib, yog tias lub ntsiab lub cev muaj zog tawm tswv yim tam sim no qis dua tus nqi no,nws yog nyob rau hauv hom tsis thauj khoom. Yog tias nws tshaj tus nqi no, Nws yuav tawm ntawm hom tsis muaj khoom thiab nkag mus rau hom txiav. Chav tsev yog Amperes;
Viav vias caj npab ceev: Thawj qhov nrawm ntawm lub cev muaj zog viav vias caj npab thaum pib;
Txiav hom: Hloov ntawm hniav pom thiab xaim pom hom, Cov qauv yuav hloov raws li tom qab hloov hom; Hauv hom hniav pom, Cov chaw taws teeb tswj zaub suav nrog lub cev muaj zog viav vias caj npab lub cev muaj zog, Hauv hom xaim pom, Tsis muaj viav vias caj npab lub cev muaj zog;
Debounce lub sij hawm: Thaum lub ntsiab lub cev muaj zog lub tswv yim tam sim no tshaj qhov nres tam sim no, Lub tswv yim tam sim no yuav raug saib xyuas tsis tu ncua. Debounce lub sij hawm yog lub sij hawm ntawm no tas mus li soj ntsuam. Tom qab lub sijhawm no, Yog tias lub cev muaj zog tseem tshaj qhov nres tam sim no, Lub cev muaj zog taug kev yuav nres;Txwv tsis pub, Lub cev muaj zog taug kev yuav nres. Lub cev muaj zog yuav txuas ntxiv khiav;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Default Offset: Tus nqi pib ntawm kev taug kev lub cev muaj zog ceev thaum lub chaw taws teeb tswj tau siv zog rau = 50% ntawm tus nqi no;

6.Cov yam ntxwv hluav taws xob ntawm cov chaw taws teeb tswj

7.Chaw taws teeb tswj qhov ntev

The final interpretation right of this product belongs only to our company.

Model: DH12S-LD

Cov Khoom Siv Tau:crawler wire saw machine

Daim duab Khoom Accessories

Ceeb toom: Koj tuaj yeem xaiv ib qho ntawm peb lub kav hlau txais xov. The suction cup antenna is standard by default.

Cov Chaw Taws Teeb Tswj Hloov Lus Piav Qhia

Qhia Cov Ntsiab Lus Qhia

Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (Adjustable ntsuas)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)

Tsawg voltage: Cov chaw taws teeb tswj roj teeb tsawg dhau, please replace the battery.

Network Disconnected: Wireless teeb liab cuam tshuam. Thov xyuas lub hwj chim receiver, Fais fab nws dua, and restart the remote control.

Cov Lus Qhia Txog Kev Ua Haujlwm Chaw Taws Teeb Tswj

1.Turn on the remote control

When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, turn on the power switch, andthe display will show the motor speed, indicating successful startup.

2.Large motor and speed regulation

Turn the “rau pem hauv ntej / rov qab” switch to forward, the receiver’s large motor will turn on, and the display will show forward

Turn the “rau pem hauv ntej / rov qab” switch to reverse, the large motor of the receiver will turn on in reverse, and the display will show reverse

Rotate the “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;

3.Small motor and speed regulation

Move the “rau pem hauv ntej / rov qab” switch to forward, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward

Turn the “Forward/Reverse” switch to reverse, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse

4.Turn left and right

Turn the “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left

Turn the “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right

5.Turn in place

Hauv phau ntawv hom:
Turn left in place: Press and hold the “Enable” button, turn the “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;

Turn right in place: Press and hold the “Enable” button, turn the “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;

6.Small motor speed limit adjustment

In automatic mode: press and hold the “Enable” button and rotate the “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;

7.Tsis siv neeg txiav

The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;

8. Straight line correction

When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: Hauv phau ntawv hom, press and hold the “Enable” button and rotate the “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 to 90; correction voltage of one correction unit is about 0.02V;

9. Parameter menu (cov neeg siv raug txwv tsis pub hloov kho nws yam tsis muaj kev tso cai)

Some functions of the remote control can be adjusted through parameters. Hauv phau ntawv hom, when the small motor speed S2 is 10, thawb qhov hloov mus rau pem hauv ntej / rov qab mus rau peb zaug hauv kab, and then push it down three times in a row to enter the parameter menu;
Tawm ntawm cov ntawv qhia zaub mov parameter: choose to save or not save, then press the enable button to confirm the exit;
Maximum current: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, default 800, kev hloov kho raug txwv;
Deceleration parameter: automatic cutting control parameter. Thaum txiav tus nqi hloov tam sim no tshaj tus nqi no,deceleration begins.
Acceleration a1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Deceleration a2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Maximum walking: the maximum speed of the small motor.
Txiav tam sim no: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Lub neej ntawd ceev txwv: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Kev txwv ceev offset: the maximum speed of the small motor during automatic cutting.
Siab tshaj plaws tus tswv tsev: maximum speed of large motor.

Cov yam ntxwv hluav taws xob ntawm cov chaw taws teeb tswj

Chaw taws teeb tswj qhov ntev

The final interpretation right of this product belongs only to our company.