The remote control for automatic cutting of track car rope saw is suitable for track type rope saw
cutting machines. It uses the 485 Modbus RTU protocol to control the left and right track frequency
converters, as well as the large motor frequency conversion speed control start and the front, rear,
left and right direction controllers. And it can read the working current of the large motor frequency
converter through the 485 Modbus RTU protocol. By analyzing and comparing the current of the
large motor, the speed of the left and right tracks can be automatically adjusted in real time to
achieve automatic cutting function.

2. Cov khoom lag luam ua haujlwm

1. Adopting 433MHz wireless communication technology, with a wireless operating distance of 100 meters.
2. Adopt automatic frequency hopping function and use 32 sets of wireless remote controllers
simultaneously, without affecting each other.
3. Supports all frequency converters with 485 Modbus RTU protocol, and currently compatible frequency
converter brands include:Shanghai Xielin, Fuji, Huichuan, Zhongchen, INVT, and . For brands
that are not compatible, please contact us for customization.
4. Support speed regulation, starting, and current reading of large motor frequency converters.
5. Support left and right track frequency converter speed regulation, starting, front, back, left and right control.
6. Support linear correction of left and right track frequency converters to keep the machine walking in a
straight line.
7. Support automatic cutting function of rope saw, automatically adjust the left and right track speed in
real time according to the current information of the large motor.
8. It is also compatible with direct IO output control for motor start and stop, and analog voltage output
control for motor speed.

3. Cov khoom lag luam specifications

4. Khoom muaj nuj nqi Taw qhia

Cov ntawv ceeb toom:
①Screen display:

②Mode switch:

③Enable:
Combination buttons, Qee qhov kev ua haujlwm yuav tsum tau nias thiab tuav lub pob kom ua haujlwm.,see the instructions for each switch for details.
④Large motor switch:
Siv 3-ceev pib dua hloov., Rub qhov hloov no tswj kev sib hloov rau pem hauv ntej thiab rov qab ntawm lub cev muaj zog loj.. After releasing it, Lub xeev yuav raug tswj hwm., Cov cim sib xws yuav tshwm sim ntawm lub vijtsam.. The S1↑ arrow indicates forward rotation, and the S1 ↓ arrow indicates everse rotation.
(5) Lub cev muaj zog me me rau pem hauv ntej / rov qab hloov.:
The small motor is equipped with a 3-speed self-locking switch in front of it. Pressing the enable button and pulling this switch can control the small motor to move forward and backward, and the corresponding display will appear on the screen.The ↑↑ arrow represents forward, and the ↓↓ arrow represents backward.
⑥ Straight line correction:
Using a multi turn encoder knob, press the enable button, turn the knob right, and display the straight line correction: Df: The left turn knob increases by 1 unit per rotation, and the left
motor speed increases by 0.1 unit; Turn left knob, straight line correction display: Df: On the right, every turn of the knob increases by 1 unit, and the speed of the right motor increases
by 0.1 unit.
⑦Small motor turning switch:
Siv 3-ceev pib dua hloov., when manually operated, the small motor can be controlled to turn left or right. Once released, the remote control will automatically stop this action. In the forward state, when this switch is turned, the corresponding display will appear on the screen. The ←↑ arrow indicates left turn, and the ↑→ arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen. The ←↓ arrow indicates left turn, and the ↓→ arrow indicates right turn.
⑧ Large motor speed regulation:
Using a multi turn encoder knob, rotating 1 grid each time, the speed value of the large motor changes by approximately 0.2 units. Fast rotation can quickly modify the speed value of the large motor.
⑨ Small motor speed regulation:
Using a multi turn encoder knob, in manual mode, press the enable button and then rotate one grid at a time，the speed value of the left and right small motors changes by about 0.1 units, and quick rotation can quickly modify the speed value of the small motor.In automatic mode, press the enable button and rotate one grid at a time,the speed limit value F of the small motor changes by approximately 0.1 units. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote control power switch
The remote control display screen is turned on.

5. Product accessory diagram

6. Product Installation Guide
6.1 n
1. Install the receiver into the electrical cabinet through the buckle on the back, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. a. Connect the equipment to the receiver through wires.
3. After fixing the receiver, it is necessary to connect the antenna equipped with the receiver and install or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for the best signal effect. It is forbidden to leave the antenna unconnected or place it inside the electrical cabinet, as it may cause the signal to be unusable.
4. Finally, install the battery on the remote control, tighten the battery cover, and turn on the power switch of the remote control. After the remote control display screen shows the normal
working interface, remote control operations can be performed.

6.2 Receiver installation dimensions

6.3 Receiver Wiring Reference Diagram

7. Product operation instructions
7.1 Remote Control Parameter Settings
Method to enter the remote control backend parameters:

Turn the mode switch to manual mode, adjust the speed of the small motor to 25 on both sides, or 0, 10, 20, 40, 50 on all sides, and continuously turn the forward switch of the large motor up 3 times and down 3 times;
Use the “Small Motor Speed Control” knob to flip pages, press the enable button, and then turn the small motor speed control knob to modify parameters. After modification, turn the page to the end,select “Save” to exit, and press the enable button to exit the menu;
The parameters are as follows:
Maximum current: feedback range of large motor current, set range 15-200A, default 100;
Speed control parameters: Automatic mode, small motor automatically accelerates faster or slower,the smaller the faster, set range 200-1500, default 800;
Deceleration parameter: Set the upper limit that allows the motor speed to change. When the current changes beyond this value, the deceleration will occur. The smaller, the faster the deceleration of the left and right motors, nrog ntau yam ntawm 05-12 and a default of 06;
Acceleration a1: The larger the motor speed, the faster it increases, nrog ntau yam ntawm 00-06 and a default of 01;
Deceleration a2: The larger the motor speed, the faster it decreases, nrog ntau yam ntawm 00-06 and a default of 02;
Enable speed regulation: Does the small motor speed regulation need to be enabled? 00 does not enable, 01 enables, default is 01;
Start self-locking: Does the large motor automatically maintain self-locking after the forward and reverse switches are released? 00 does not hold, 01 holds, default 01
Maximum walking: maximum speed of left and right motors, range 10-100, default 50;
Txiav tam sim no: maximum cutting current, displayed on the screen as IC value, range 15-160, default 30,
corresponding to IC: 30 displayed on the screen. The upper limit of this parameter is 80% of the maximum current;
Lub neej ntawd ceev txwv: The default small motor automatic cutting speed when turned on is within the range of 0-100, with a default of 10. The screen displays F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Automatic mode: Set to 00, the automatic/manual switch is a mode switch. Set to 01, the automatic/manual switch is set to the automatic position, the display screen shows lighting, and the automatic terminal output on the receiver is closed. When set to manual, the automatic output terminal is disconnected;
Speed limit deviation: The upper limit of the automatic cutting speed of the small motor ranges from 00 rau 200, with a default of 60 and a corresponding display of 6.0 on the screen; Upper limit of display value=speed limit offset x 0.1;
Siab tshaj plaws tus tswv tsev: maximum speed of the large motor, range 10-100, default 50;
Mbus equipment (yuav tsum tau): Selection of large motor frequency converter model, range 00-03, default 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）
SBUS equipment (yuav tsum tau): Small motor frequency converter model selection, range 00-05, default 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）

04-Anchuanda 05-None

7.2 Parameter setting of frequency converter
1. Command source selection: Communication command channel
2. Main frequency source selection: communication given
3. Baud rate: 19200
4. Data format: No verification, data format<8-N-1>
5. Local address: Set the left frequency converter to 1, the right frequency converter to 2, and
the large motor frequency converter to 3
7.3 Remote Control Operation Instructions
1. Power on the machine, turn on the remote control, enter the remote control backend, set the
remote control backend parameters, mainly setting the small motor and large motor frequency
converter models: (Hla cov kauj ruam no yog tias lub tshuab chaw tsim tshuaj paus twb tau teeb tsa nws);
2. Set the parameters of the frequency converter (skip this step if the machine manufacturer
has already set it);
3. Teeb tsa cov chaw taws teeb tswj mus rau phau ntawv hom, and then use the remote control to move the machine to
the working position;
4. Hauv phau ntawv hom, set the cutting current of the large motor to IC and the speed of the large motor
5. Hloov mus rau hom tsis siv neeg thiab teeb tsa qhov kev txiav ceev ceev F tus nqi rau lub cev muaj zog me me;
6. In automatic mode, Tig lub cev muaj zog loj hloov mus rau pem hauv ntej los pib nws, then turn
the small motor switch to forward or reverse, and the remote control enters automatic cutting
mode to start cutting.

8.Product troubleshooting

9.Kev saib xyuas
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Yog tias cov chaw taws teeb tsis siv ntev, please remove the battery and store the remote control and battery in a clean
and safe place.
6.During storage and transportation, attention should be paid to moisture and shock resistance.

10. Safety Information
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by
insufficient power, which may result in the remote control being unable to operate.
3. If repair is required, please contact the manufacturer. If the damage is caused by self repair, the manufacturer
will not provide warranty.

Model: DH01R-4W-26K

Cov Khoom Siv Tau:ntau yam khoom siv kev lag luam

2.Daim duab Khoom Accessories

Ceeb toom: Koj tuaj yeem xaiv ib qho ntawm peb lub kav hlau txais xov. The suction cup antenna is standard by default.

3.Cov khoom qauv piav qhia

Ceeb toom:
(1) DH01R series, yog tias lub suffix muaj T, nws txhais tau tias nrog kev kub ntxhov nres tso zis;tsis muaj T, it means without emergency stop output.

(2) Yog tias tsis muaj cov zis analog, tsis tas yuav nco ntsoov 0W lossis 0R; cov analog ntau W1, W2, W3, thiab W4 lub neej ntawd rau 0-10V analog voltage tso zis; nyob rau tib lub sijhawm, W1 thiab W2 tuaj yeem nthuav dav rau 2 cais tawm digital potentiometer outputs, nrog ntau yam ntawm 0 -5K ohms, 1/2 watt; kev daws teeb meem: 20 ohms. Ob lub digital potentiometer tuaj yeem siv los tswj cov vuam tam sim no thiab vuam hluav taws xob ntawm lub tshuab vuam. Yog tias yuav tsum muaj cov zis digital potentiometer, user notes are required.

(4) Analog input, ntau yam los ntawm 1 rau 2, qhia tias muaj a 1 rau 2 analog inputs(maximum 2 channels); thaum muaj ib qho analog input, koj yuav tsum nco ntsoov qhov hluav taws xob ntau ntawm cov tswv yim analog (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, thiab lwm yam) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Nta

1）Maximum 26 relay outputs;
2）Maximum 4 channels of analog 0-10V output (display range can be customized): supports 2 channels of extended isolated digital potentiometer output;
3）2 analog inputs; and displayed on the remote control, the display range can be customized
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 AA roj teeb, low power consumption design;
6） Wireless operation distance is 200 meters;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.

5.Cov Chaw Taws Teeb Tswj Hloov Lus Piav Qhia

6.Display content introduction

W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)

Tsawg voltage: Cov chaw taws teeb tswj roj teeb tsawg dhau, please replace the battery.

Network Disconnected: Wireless teeb liab cuam tshuam. Thov xyuas lub hwj chim receiver, Fais fab nws dua, and restart the remote control.

7.Cov Lus Qhia Txog Kev Ua Haujlwm Chaw Taws Teeb Tswj

1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, turn on the power switch, and the display shows a value,indicating successful startup. The receiver working indicator light becomes solid.
2Hloov thiab khawm muaj nuj nqi
Txhua yam kev khiav hauj lwm ntawm lub twist hloov thiab nyees khawm ntawm cov chaw taws teeb tswj yuav tswj tau qhov sib xws hloov teeb liab tso zis taw tes ntawm lub receiver. Tag nrho cov hloov teeb liab tso zis ntawm lub receiver yog feem ntau qhib los ntawm lub neej ntawd;
3W1-W4 ceev kho
Tig lub pob khawm ntawm W1-W4 los tswj cov teeb liab analog tso zis sib xws los yog lub teeb liab potentiometer ntawm tus txais. Lub teeb liab analog tso zis ntawm lub receiver yog los ntawm lub neej ntawd 0-10V voltage teeb liab, Lub teeb liab potentiometer defaults rau 0-5K;
4Thaum muaj xwm ceev nres muaj nuj nqi
When the emergency stop button is pressed, Tag nrho cov teeb liab hloov tawm raug txiav tawm thiab cov zis analog raug txiav tawm; Tom qab tso tawm qhov chaw nres tsheb thaum muaj xwm ceev, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Tawm ntawm cov ntawv qhia zaub mov parameter: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: Cov zaub ntau tus nqi ntawm W1 pob khawm ntawm lub vijtsam zaub, adjustable los ntawm 0 rau 9999;
F2W2 ntau yam: Cov zaub ntau yam nqi ntawm W2 pob rau ntawm lub vijtsam zaub, adjustable los ntawm 0 rau 9999;
F3W3 ntau yam: Cov zaub ntau tus nqi ntawm W3 pob khawm ntawm lub vijtsam zaub, adjustable los ntawm 0 rau 9999;
F4W4 ntau yam: Cov zaub ntau tus nqi ntawm W4 pob khawm ntawm lub vijtsam zaub, adjustable los ntawm 0 to 9999
F5A1 ntau yam: Tso saib ADC1 tawm tswv yim zaub ntau tus nqi, 0-5000 adjustable;
F6A2 ntau yam: Zaub ADC2 tawm tswv yim zaub ntau tus nqi, 0-5000 adjustable;
Tswb tam sim no: Teeb tsa lub tswb tus nqi rau ADC1 thiab ADC2 tawm tswv yim zaub. Thaum ADC1 thiab ADC2 tshaj tus nqi no, cov chaw taws teeb tswj zaub yuav tswb; thaum tus nqi no yog 0, lub tswb muaj nuj nqi tsis raug;

8.Cov yam ntxwv hluav taws xob ntawm cov chaw taws teeb tswj

9.Chaw taws teeb tswj qhov ntev

The final interpretation right of this product belongs only to our company.

Model: DH12S-P6S

Cov Khoom Siv Tau:Hlau Kaw / Hniav Kaw Tshuab

2.Daim duab Khoom Accessories

Ceeb toom: Koj tuaj yeem xaiv ib qho ntawm peb lub kav hlau txais xov. The suction cup antenna is standard by default.

3.Cov Chaw Taws Teeb Tswj Hloov Lus Piav Qhia

4.Qhia Cov Ntsiab Lus Qhia

Lub Ntsiab Lub Cev Muaj Zog Ceev: Lub Ntsiab Loj: 0-50
Mus Ncig Lub Cev Muaj Zog Ceev: Kab: 0-50
Siab tshaj plaws ceev txwv ntawm tsis siv neeg txiav lub cev muaj zog: ceev: 0-30
(Adjustable ntsuas)
Tsis siv neeg txiav lub ntsiab lub cev muaj zog teeb tam sim no: chaw: 28 (Adjustable ntsuas)
Viav vias caj npab lub cev muaj zog ceev: viav vias: 0-50

Tsawg voltage: Cov chaw taws teeb tswj roj teeb tsawg dhau, please replace the battery.

Network Disconnected: Wireless teeb liab cuam tshuam. Thov xyuas lub hwj chim receiver, Fais fab nws dua, and restart the remote control.

5.Cov Lus Qhia Txog Kev Ua Haujlwm Chaw Taws Teeb Tswj

1Tig Rau Cov Chaw Taws Teeb Tswj

When the receiver is powered on, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; install two AA batteries in the remote control, turn on the power switch, and the display will show the motor speed, indicating successful startup.

2）Large motor and speed regulation/Main motor and speed regulation

Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to forward, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to reverse, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Rotate the “big motor” Pob khawm los kho qhov kev tswj hwm ceev ntawm lub receiver lub ntsiab lub cev muaj zog inverter los ntawm 0 txog 10V;

3）Traveling motor

Press and hold “Speed Adjustment Enable”, turn the “Forward/Reverse” switch to forward or backward, and the walking motor will move at a high speed of 50;

4）Swing arm motor and speed regulation

Turn the “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;

Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” switch, the swing arm motor will move at a high speed of 50;

5）Travel motor speed limit adjustment

Press and hold the “speed adjustment enable” button and rotate the “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “rau pem hauv ntej / rov qab” hloov mus rau pem hauv ntej lossis rov qab mus rau hauv hom tsis siv neeg txiav hom;

7Parameter ntawv qhia zaub mov (cov neeg siv raug txwv tsis pub hloov kho nws yam tsis muaj kev tso cai)

Nkag mus rau cov ntawv qhia zaub mov parameter:Hauv phau ntawv hom, thaum lub cev muaj zog tseem ceeb yog 0, thawb qhov hloov mus rau pem hauv ntej / rov qab mus rau peb zaug hauv kab, thiab tom qab ntawd thawb nws hauv qab peb zaug hauv kab kom nkag mus rau hauv cov ntawv qhia zaub mov parameter;
Tawm ntawm cov ntawv qhia zaub mov parameter: Tig lub pob kho kom nrawm, xaiv txuag lossis tsis txuag, thiab nias lub pob kom paub meej;
Rated tam sim no: Tus nqi siab tshaj plaws ntawm lub cev muaj zog tseem ceeb tam sim no, chav tsev: Ampere;
Kev hloov kho ceev: Tsis siv neeg txiav tswj cov ntsuas, default 800, chav tsev: millisecond,kev hloov kho raug txwv;
Deceleration parameter: Thaum txiav tus nqi hloov tam sim no tshaj tus nqi no, nrawm nrawm pib, chav tsev: Ampere;
Acceleration a1: Thaum lub txiav tam sim no qis dua qhov teeb txiav tam sim no, the speed value increased by each acceleration of the walking motor;
Deceleration a2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, kev hloov kho raug txwv;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, kev hloov kho raug txwv;
Maximum current: The range of main motor feedback current, chav tsev: Ampere;
Siab tshaj plaws tus tswv tsev: Remote control main motor speed adjustment display range;
Maximum walking: Invalid parameter;
Kev txwv ceev offset: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Txo rhiab heev: Thaum lub cev muaj zog tseem ceeb lub tswv yim tam sim no txo, thiab txhua zaus qhov txo qis tshaj tus nqi no, Lub cev muaj zog taug kev qeeb qeeb;
Kev hloov kho rhiab heev: Ntxiv lossis rho tawm ntawm qhov rhiab heev parameter nce;
Teeb tsa tam sim no: Tsis siv neeg txiav, Threshold ntawm lub cev muaj zog lub tswv yim tam sim no. Yog tias tus nqi no dhau lawm,Lub cev muaj zog taug kev pib ua kom nrawm dua;Yog tias hauv qab no tus nqi, lub cev muaj zog taug kev pib nrawm nrawm;unit: Amperes;
Idle tawm: Thaum tsis siv neeg hom pib, yog tias lub ntsiab lub cev muaj zog tawm tswv yim tam sim no qis dua tus nqi no,nws tseem nyob hauv hom tsis muaj zog. Yog hais tias nws yog saum toj no tus nqi, nws tawm idle hom thiab nkag mus rau hauv kev txiav hom. Chav tsev yog amperes;
Tsis muaj load tam sim no:Thaum tsis siv neeg hom pib, yog tias lub ntsiab lub cev muaj zog tawm tswv yim tam sim no qis dua tus nqi no,nws yog nyob rau hauv hom tsis thauj khoom. Yog tias nws tshaj tus nqi no, Nws yuav tawm ntawm hom tsis muaj khoom thiab nkag mus rau hom txiav. Chav tsev yog Amperes;
Viav vias caj npab ceev: Thawj qhov nrawm ntawm lub cev muaj zog viav vias caj npab thaum pib;
Txiav hom: Hloov ntawm hniav pom thiab xaim pom hom, Cov qauv yuav hloov raws li tom qab hloov hom; Hauv hom hniav pom, Cov chaw taws teeb tswj zaub suav nrog lub cev muaj zog viav vias caj npab lub cev muaj zog, Hauv hom xaim pom, Tsis muaj viav vias caj npab lub cev muaj zog;
Debounce lub sij hawm: Thaum lub ntsiab lub cev muaj zog lub tswv yim tam sim no tshaj qhov nres tam sim no, Lub tswv yim tam sim no yuav raug saib xyuas tsis tu ncua. Debounce lub sij hawm yog lub sij hawm ntawm no tas mus li soj ntsuam. Tom qab lub sijhawm no, Yog tias lub cev muaj zog tseem tshaj qhov nres tam sim no, Lub cev muaj zog taug kev yuav nres;Txwv tsis pub, Lub cev muaj zog taug kev yuav nres. Lub cev muaj zog yuav txuas ntxiv khiav;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Default Offset: Tus nqi pib ntawm kev taug kev lub cev muaj zog ceev thaum lub chaw taws teeb tswj tau siv zog rau = 50% ntawm tus nqi no;

6.Cov yam ntxwv hluav taws xob ntawm cov chaw taws teeb tswj

7.Chaw taws teeb tswj qhov ntev

The final interpretation right of this product belongs only to our company.

Model: DH12S-LD

Cov Khoom Siv Tau:crawler wire saw machine

Daim duab Khoom Accessories

Ceeb toom: Koj tuaj yeem xaiv ib qho ntawm peb lub kav hlau txais xov. The suction cup antenna is standard by default.

Cov Chaw Taws Teeb Tswj Hloov Lus Piav Qhia

Qhia Cov Ntsiab Lus Qhia

Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (Adjustable ntsuas)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)

Tsawg voltage: Cov chaw taws teeb tswj roj teeb tsawg dhau, please replace the battery.

Network Disconnected: Wireless teeb liab cuam tshuam. Thov xyuas lub hwj chim receiver, Fais fab nws dua, and restart the remote control.

Cov Lus Qhia Txog Kev Ua Haujlwm Chaw Taws Teeb Tswj

1.Turn on the remote control

When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, turn on the power switch, andthe display will show the motor speed, indicating successful startup.

2.Large motor and speed regulation

Turn the “rau pem hauv ntej / rov qab” switch to forward, the receiver’s large motor will turn on, and the display will show forward

Turn the “rau pem hauv ntej / rov qab” switch to reverse, the large motor of the receiver will turn on in reverse, and the display will show reverse

Rotate the “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;

3.Small motor and speed regulation

Move the “rau pem hauv ntej / rov qab” switch to forward, lub log sab laug rau pem hauv ntej thiab lub log sab xis rau pem hauv ntej ntawm lub receiver yog qhib, thiab cov zaub qhia rau pem hauv ntej

Turn the “Forward/Reverse” switch to reverse, lub log sab laug rov qab thiab lub log sab xis rov qab ntawm lub receiver yog qhib, thiab cov zaub qhia rov qab

4.Lem sab laug thiab sab xis

Turn the “Sab laug/sab xis” hloov mus rau sab laug, tus txais lub log sab xis yuav txav mus rau pem hauv ntej thiab tig,thiab cov zaub yuav qhia sab laug

Turn the “Lem sab laug/sab xis” Hloov mus rau sab xis, Lub log sab laug ntawm lub receiver yuav txav mus rau pem hauv ntej thiab tig, thiab cov zaub yuav qhia lem sab xis

5.Lem rau hauv qhov chaw

Hauv phau ntawv hom:
Tig sab laug hauv qhov chaw: Press and hold the “Qhib ” Khawm, turn the “Lem sab laug/sab xis” hloov mus rau sab laug, lub log sab laug rov qab thiab lub log sab xis rau pem hauv ntej ntawm lub receiver tau qhib,thiab pib tig sab laug hauv qhov chaw;

Lem sab xis hauv qhov chaw: Press and hold the “Qhib ” Khawm, turn the “Lem sab laug/sab xis” hloov mus rau sab xis, lub log sab laug rau pem hauv ntej thiab lub log sab xis rov qab ntawm lub receiver yog qhib, and the receiver starts to turn right in place;

6.Small motor speed limit adjustment

In automatic mode: press and hold the “Qhib ” button and rotate the “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;

7.Tsis siv neeg txiav

The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;

8. Straight line correction

When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, Qhov ceev ntawm lub log sab laug yog fine-tuned kom phim qhov ceev ntawm txoj cai log, Qhov no yog ua los synchronize lub speeds ntawm sab laug thiab txoj cai log thiab tshem tawm deviation;
Deviation kho txoj kev ua hauj lwm: Hauv phau ntawv hom, press and hold the “Qhib ” button and rotate the “Me me lub cev muaj zog ceev kho”;
Tig clockwise kom nce lub log sab laug ceev voltage, thiab kho tus nqi ntawm cov zaub yuav nce;
Tig counterclockwise kom txo tau sab laug log ceev voltage, thiab cov zaub kho tus nqi yuav txo;
Kho kom raug ntau yam: Kho tus nqi -90 rau 90; Qhov kho voltage rau ib chav kho yog li ntawm 0.02V;

9. Parameter ntawv qhia zaub mov (cov neeg siv raug txwv tsis pub hloov kho nws yam tsis muaj kev tso cai)

Some functions of the remote control can be adjusted through parameters. Hauv phau ntawv hom, Thaum lub cev muaj zog me me ceev yog S2 10, thawb qhov hloov mus rau pem hauv ntej / rov qab mus rau peb zaug hauv kab, Tom qab ntawd thawb nws cia peb zaug sib law liag nkag mus rau hauv cov ntawv qhia zaub mov parameter;
Tawm ntawm cov ntawv qhia zaub mov parameter: choose to save or not save, Tom qab ntawd nias lub khawm kom paub meej tias tawm;
Maximum current: Kev khiav hauj lwm rated tam sim no ntawm lub cev muaj zog txiav yog 80% ntawm no tam sim no;
Speed control parameters: tsis siv neeg txiav tswj parameters, default 800, kev hloov kho raug txwv;
Deceleration parameter: automatic cutting control parameter. Thaum txiav tus nqi hloov tam sim no tshaj tus nqi no,deceleration begins.
Acceleration a1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Deceleration a2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Maximum walking: the maximum speed of the small motor.
Txiav tam sim no: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Lub neej ntawd ceev txwv: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Kev txwv ceev offset: the maximum speed of the small motor during automatic cutting.
Siab tshaj plaws tus tswv tsev: maximum speed of large motor.

Cov yam ntxwv hluav taws xob ntawm cov chaw taws teeb tswj

Chaw taws teeb tswj qhov ntev

The final interpretation right of this product belongs only to our company.

Model：ATWGP-12

Adaptation system: tag nrho CNC systems nrog handwheel interface

Cov khoom no yog phau ntawv mem tes generator siv nrog CNC tshuab cuab yeej. Nws tau siv dav dav hauv thaj chaw xws li CNC tshuab cuab yeej, CNC lathes, machining chaw,CNC engraving thiab milling tshuab. Cov khoom no siv wireless kis tau tus mob thev naus laus zis, tshem tawm qhov xav tau ntawm cov tsoos caij nplooj ntoos hlav xaim txuas txuas, txo cov khoom siv tsis ua haujlwm los ntawm cov cables, tshem tawm cable luag, roj thiab lwm yam paug, thiab ua kom muaj kev lag luam yooj yim dua. Cov khoom lag luam muaj xws li lub receiver thiab wireless hluav taws xob handwheel. Lub receiver txuas nrog cov khoom siv CNC los ntawm lub network cable, thiab lub tshuab hluav taws xob, (tes mem tes generator,) txuas nrog thiab sib txuas lus nrog tus txais los ntawm wireless kis tau tus thev naus laus zis. The operator holds the handwheel and can get rid of the connection constraints of the spring wire and move freely. For large-scale gantry milling, CNC lathes, traveling machine tools, cutting and other applications, it brings great convenience and improves work efficiency.

Supports various system brands such as Siemens, Mitsubishi, Fanuc, TaiwanXindai, Baoyuan, Fagor, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Using the 433MHZ wireless communication frequency band, the wireless operating distance is 40 meters;
2. Adopt automatic frequency hopping function and use 32 sets of wireless handwheels at the same time without affecting each other;
3. Supports emergency stop button and 3 custom button switch outputs;
4. Supports multiple axis selections of 6-axis, 7-Axis, 8-Axis, 9-Axis, 10-axis and 12-axis, with 3-speed and 4-speed magnification.Axis selection and magnification switches support various signal types such as binary coding, point-to-point, gray code, thiab lwm yam;
5. Supports 5V differential pulse signal, 24V pulse signal and other pulse signal types;
6. Low power consumption design, 2 AA batteries can be used for more than 1 Lub hli;
7. Supports external extension antenna, suitable for various machine tool installation environments, ensuring signal stability;

Ceeb toom:
1. Status indicator light:
Signal light (left): The signal light is always on when the handwheelis operated, and does not light up when not operating;
Low voltage alarm light (right): When the battery power is too low,the alarm light flashes or stays on;
2. Enable button:
After pressing and holding the enable button, the axis selection and magnification signals are activated, and the pulse encoder output is valid;
3. Custom button:
Ib lub pob tsis muaj nuj nqi yuav tswj tau ib tug sib raug hloov tso zis ntawm lub receiver;

COM1: Common davhlau ya nyob twg rau axis xaiv magnification teeb liab tso zis; yuav txuas nrog 0-24V pej xeem teeb liab
COM2: Common davhlau ya nyob twg ntawm 3 kev cai khawm outputs;

*Axis xaiv thiab magnification yuav raug xaiv los ntawm software, coding los yog point-to-point, thov sab laj cov neeg ua hauj lwm rau cov ntsiab lus

The final interpretation right of this product belongs to our company.

Adaptation system: tag nrho CNC systems nrog handwheel interface

Cov khoom no yog phau ntawv mem tes generator siv nrog CNC tshuab cuab yeej. Nws tau siv dav dav hauv thaj chaw xws li CNC tshuab cuab yeej, CNC lathes, machining chaw,CNC engraving thiab milling tshuab. Cov khoom no siv wireless kis tau tus mob thev naus laus zis, tshem tawm qhov xav tau ntawm cov tsoos caij nplooj ntoos hlav xaim txuas txuas, txo cov khoom siv tsis ua haujlwm los ntawm cov cables, tshem tawm cable luag, roj thiab lwm yam paug, thiab ua kom muaj kev lag luam yooj yim dua. Cov khoom lag luam muaj xws li lub receiver thiab wireless hluav taws xob handwheel. Lub receiver txuas nrog cov khoom siv CNC los ntawm lub network cable, thiab lub tshuab hluav taws xob, (tes mem tes generator,) txuas nrog thiab sib txuas lus nrog tus txais los ntawm wireless kis tau tus thev naus laus zis. The operator holds the handwheel and can get rid of the connection constraints of the spring wire and move freely. For large-scale gantry milling, CNC lathes, traveling machine tools, cutting and other applications, it brings great convenience and improves work efficiency.

Supports various system brands such as Siemens, Mitsubishi, Fanuc, TaiwanXindai, Baoyuan, Fagor, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Using the 433MHZ wireless communication frequency band, the wireless operating distance is 40 meters;
2. Adopt automatic frequency hopping function and use 32 sets of wireless handwheels at the same time without affecting each other;
3. Supports emergency stop button and 3 custom button switch outputs;
4. Supports multiple axis selections of 6-axis, 7-Axis, 8-Axis, 9-Axis, 10-axis and 12-axis, with 3-speed and 4-speed magnification.Axis selection and magnification switches support various signal types such as binary coding, point-to-point, gray code, thiab lwm yam;
5. Supports 5V differential pulse signal, 24V pulse signal and other pulse signal types;
6. Low power consumption design, 2 AA batteries can be used for more than 1 Lub hli;
7. Supports external extension antenna, suitable for various machine tool installation environments, ensuring signal stability;

Ceeb toom:
1. Status indicator light:
Signal light (left): The signal light is always on when the handwheelis operated, and does not light up when not operating;
Low voltage alarm light (right): When the battery power is too low,the alarm light flashes or stays on;
2. Enable button:
After pressing and holding the enable button, the axis selection and magnification signals are activated, and the pulse encoder output is valid;
3. Custom button:
Ib lub pob tsis muaj nuj nqi yuav tswj tau ib tug sib raug hloov tso zis ntawm lub receiver;

COM1: Common davhlau ya nyob twg rau axis xaiv magnification teeb liab tso zis; yuav txuas nrog 0-24V pej xeem teeb liab
COM2: Common davhlau ya nyob twg ntawm 3 kev cai khawm outputs;

*Axis xaiv thiab magnification yuav raug xaiv los ntawm software, coding los yog point-to-point, thov sab laj cov neeg ua hauj lwm rau cov ntsiab lus

The final interpretation right of this product belongs to our company.