Application:Specially used for crawler wire saw machine
1.Supports automatic cutting function, Tsis siv neeg kho qhov kev txiav ceev raws li lub cev muaj zog tam sim no
2.Barrier-free transmission distance is 200 meters.
3. Support DC driver.
4. Supports multiple cutting parameter settings, such as cutting current, cutting speed limit, etc.
5. Supports switching between wire saw and blade saw modes. Different cutting parameters can be set in different modes.
Model: DH12S-P6S
Cov Khoom Siv Tau:Hlau Kaw / Hniav Kaw Tshuab
Ceeb toom: Koj tuaj yeem xaiv ib qho ntawm peb lub kav hlau txais xov. Lub kav hlau txais xov nqus yog tus qauv los ntawm lub neej ntawd.
Lub Ntsiab Lub Cev Muaj Zog Ceev: Lub Ntsiab Loj: 0-50
Mus Ncig Lub Cev Muaj Zog Ceev: Kab: 0-50
Siab tshaj plaws ceev txwv ntawm tsis siv neeg txiav lub cev muaj zog: ceev: 0-30
(Adjustable ntsuas)
Tsis siv neeg txiav lub ntsiab lub cev muaj zog teeb tam sim no: chaw: 28 (Adjustable ntsuas)
Viav vias caj npab lub cev muaj zog ceev: viav vias: 0-50
Tsawg voltage: Cov chaw taws teeb tswj roj teeb tsawg dhau, Thov hloov lub roj teeb.
Network Disconnected: Wireless teeb liab cuam tshuam. Thov xyuas lub hwj chim receiver, Fais fab nws dua, thiab rov pib dua cov chaw taws teeb tswj.
1Tig Rau Cov Chaw Taws Teeb Tswj
When the receiver is powered on, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; install two AA batteries in the remote control, turn on the power switch, and the display will show the motor speed, indicating successful startup.
2）Large motor and speed regulation/Main motor and speed regulation
Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to forward, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to reverse, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Rotate the “big motor” Pob khawm los kho qhov kev tswj hwm ceev ntawm lub receiver lub ntsiab lub cev muaj zog inverter los ntawm 0 txog 10V;
3）Traveling motor
Press and hold “Speed Adjustment Enable”, turn the “Forward/Reverse” switch to forward or backward, and the walking motor will move at a high speed of 50;
4）Swing arm motor and speed regulation
Turn the “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;
Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” switch, the swing arm motor will move at a high speed of 50;
5）Travel motor speed limit adjustment
Press and hold the “speed adjustment enable” button and rotate the “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;
6） Automatic cutting
The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “rau pem hauv ntej / rov qab” hloov mus rau pem hauv ntej lossis rov qab mus rau hauv hom tsis siv neeg txiav hom;
7Parameter ntawv qhia zaub mov (cov neeg siv raug txwv tsis pub hloov kho nws yam tsis muaj kev tso cai)
Nkag mus rau cov ntawv qhia zaub mov parameter:Hauv phau ntawv hom, thaum lub cev muaj zog tseem ceeb yog 0, thawb qhov hloov mus rau pem hauv ntej / rov qab mus rau peb zaug hauv kab, thiab tom qab ntawd thawb nws hauv qab peb zaug hauv kab kom nkag mus rau hauv cov ntawv qhia zaub mov parameter;
Tawm ntawm cov ntawv qhia zaub mov parameter: Tig lub pob kho kom nrawm, xaiv txuag lossis tsis txuag, thiab nias lub pob kom paub meej;
Rated tam sim no: Tus nqi siab tshaj plaws ntawm lub cev muaj zog tseem ceeb tam sim no, chav tsev: Ampere;
Kev hloov kho ceev: Tsis siv neeg txiav tswj cov ntsuas, default 800, chav tsev: millisecond,kev hloov kho raug txwv;
Deceleration parameter: Thaum txiav tus nqi hloov tam sim no tshaj tus nqi no, nrawm nrawm pib, chav tsev: Ampere;
Acceleration a1: Thaum lub txiav tam sim no qis dua qhov teeb txiav tam sim no, the speed value increased by each acceleration of the walking motor;
Deceleration a2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, kev hloov kho raug txwv;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, kev hloov kho raug txwv;
Maximum current: The range of main motor feedback current, chav tsev: Ampere;
Siab tshaj plaws tus tswv tsev: Remote control main motor speed adjustment display range;
Maximum walking: Invalid parameter;
Kev txwv ceev offset: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Txo rhiab heev: Thaum lub cev muaj zog tseem ceeb lub tswv yim tam sim no txo, thiab txhua zaus qhov txo qis tshaj tus nqi no, Lub cev muaj zog taug kev qeeb qeeb;
Kev hloov kho rhiab heev: Ntxiv lossis rho tawm ntawm qhov rhiab heev parameter nce;
Teeb tsa tam sim no: Tsis siv neeg txiav, Threshold ntawm lub cev muaj zog lub tswv yim tam sim no. Yog tias tus nqi no dhau lawm,Lub cev muaj zog taug kev pib ua kom nrawm dua;Yog tias hauv qab no tus nqi, lub cev muaj zog taug kev pib nrawm nrawm;unit: Amperes;
Idle tawm: Thaum tsis siv neeg hom pib, yog tias lub ntsiab lub cev muaj zog tawm tswv yim tam sim no qis dua tus nqi no,nws tseem nyob hauv hom tsis muaj zog. Yog hais tias nws yog saum toj no tus nqi, nws tawm idle hom thiab nkag mus rau hauv kev txiav hom. Chav tsev yog amperes;
Tsis muaj load tam sim no:Thaum tsis siv neeg hom pib, yog tias lub ntsiab lub cev muaj zog tawm tswv yim tam sim no qis dua tus nqi no,nws yog nyob rau hauv hom tsis thauj khoom. Yog tias nws tshaj tus nqi no, Nws yuav tawm ntawm hom tsis muaj khoom thiab nkag mus rau hom txiav. Chav tsev yog Amperes;
Viav vias caj npab ceev: Thawj qhov nrawm ntawm lub cev muaj zog viav vias caj npab thaum pib;
Txiav hom: Hloov ntawm hniav pom thiab xaim pom hom, Cov qauv yuav hloov raws li tom qab hloov hom; Hauv hom hniav pom, Cov chaw taws teeb tswj zaub suav nrog lub cev muaj zog viav vias caj npab lub cev muaj zog, Hauv hom xaim pom, Tsis muaj viav vias caj npab lub cev muaj zog;
Debounce lub sij hawm: Thaum lub ntsiab lub cev muaj zog lub tswv yim tam sim no tshaj qhov nres tam sim no, Lub tswv yim tam sim no yuav raug saib xyuas tsis tu ncua. Debounce lub sij hawm yog lub sij hawm ntawm no tas mus li soj ntsuam. Tom qab lub sijhawm no, Yog tias lub cev muaj zog tseem tshaj qhov nres tam sim no, Lub cev muaj zog taug kev yuav nres;Txwv tsis pub, Lub cev muaj zog taug kev yuav nres. Lub cev muaj zog yuav txuas ntxiv khiav;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Default Offset: Tus nqi pib ntawm kev taug kev lub cev muaj zog ceev thaum lub chaw taws teeb tswj tau siv zog rau = 50% ntawm tus nqi no;
Qhov kawg txhais txoj cai ntawm cov khoom no tsuas yog peb lub tuam txhab.
