FANUC dedicated wireless electronic handwheel

Cov lus piav qhia

1.Khoom taw qhia

Wireless hluav taws xob handwheel yog siv rau phau ntawv qhia, Positioning, tool alignment,and other operations on CNC machine tools. Cov khoom no siv wireless kis tau tus mob thev naus laus zis, Tshem tawm cov tsoos xaim hluav taws xob, Txo cov khoom siv tsis ua haujlwm los ntawm cables, eliminating the disadvantages of cable dragging and oil stains, thiab ua kom muaj kev lag luam yooj yim dua. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,magnification, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Product features
1. siv 433MHZ wireless kev sib txuas lus thev naus laus zis, Wireless kev khiav hauj lwm nrug yog 40 meters;
2. Adopt automatic frequency hopping function, use 32 sets of wireless remote controllers at the same time without affecting each other;
3. Txhawb nqa thaum muaj xwm ceev nres khawm, Hloov IO teeb liab tso zis, connected to the system through IO wiring;
4. txhawb nqa 4 Kev cai nyees khawm, switch IO signal, output signal to the system through IO-LINK protocol;
5. Support quick movement button + and button -, press and hold the button to replace the handwheel to move the machine;
6. txhawb nqa 6-axis tswj, switch IO signal, output signal to the system through IO-LINK protocol;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Cov ntawv ceeb toom:
(1)Khawm nres thaum muaj xwm ceev:
Press the emergency stop button, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 Kev cai nyees khawm, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Press and hold the enable button and shake the pulse encoder to send out a pulse
signal to control the movement of the machine axis.
⑨Power switch:
Handwheel power button.

5.Daim duab Khoom Accessories

6.Product Installation Guide

6.1 Cov kauj ruam ntawm cov khoom lag luam

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Xa mus rau peb daim duab receiver xaim hluav taws xob, piv nws nrog koj cov khoom siv ntawm qhov chaw, thiab txuas
cov khoom siv rau lub receiver siv cables.
3. Tom qab lub receiver yog ruaj ntseg, lub kav hlau txais xov uas los nrog lub receiver yuav tsum tau txuas nrog,
thiab sab nraud kawg ntawm lub kav hlau txais xov yuav tsum tau ntsia los yog positioned sab nraum lub txee hluav taws xob.
It is recommended to place it on the top of the electrical cabinet for the best signal effect. Nws
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4.Finally, turn on the handwheel power switch and you can operate the machine by
handwheel remote control.

6.2 Receiver installation dimensions

6.3 Receiver Wiring Reference Diagram

7. Maintenance and care

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
the service life;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Please avoid squeezing, falling, bumping, etc. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Yog tias cov chaw taws teeb tsis siv ntev, Thov khaws lub handwheel rau hauv qhov chaw huv thiab ruaj ntseg;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Please read the instructions carefully before use. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. If repair is required, please contact the manufacturer. If the damage is caused by self-repair,
the manufacturer will not provide warranty.