Application:Specially used for crawler wire saw machine
1.Supports automatic cutting mode, automatically adjusts the walking speed of the small motor according to the large motor current, and achieves automatic cutting control.
2.Barrier-free transmission distance is 200 meters.
3. Supports dual speed regulation for large motors and small motors.
4. Support small motor turning in place.
5. Supports left and right wheel small motor linear correction.
Model: DH12S-LD
Cov Khoom Siv Tau:crawler wire saw machine
Ceeb toom: Koj tuaj yeem xaiv ib qho ntawm peb lub kav hlau txais xov. Lub kav hlau txais xov nqus yog tus qauv los ntawm lub neej ntawd.
Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (Adjustable ntsuas)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)
Tsawg voltage: Cov chaw taws teeb tswj roj teeb tsawg dhau, Thov hloov lub roj teeb.
Network Disconnected: Wireless teeb liab cuam tshuam. Thov xyuas lub hwj chim receiver, Fais fab nws dua, thiab rov pib dua cov chaw taws teeb tswj.
1.Turn on the remote control
When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, turn on the power switch, andthe display will show the motor speed, indicating successful startup.
2.Large motor and speed regulation
Turn the “rau pem hauv ntej / rov qab” switch to forward, the receiver’s large motor will turn on, and the display will show forward
Turn the “rau pem hauv ntej / rov qab” switch to reverse, the large motor of the receiver will turn on in reverse, and the display will show reverse
Rotate the “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;
3.Small motor and speed regulation
Move the “rau pem hauv ntej / rov qab” switch to forward, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward
Turn the “Forward/Reverse” switch to reverse, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse
4.Turn left and right
Turn the “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left
Turn the “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right
5.Turn in place
Hauv phau ntawv hom:
Turn left in place: Press and hold the “Enable” button, turn the “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;
Turn right in place: Press and hold the “Enable” button, turn the “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;
6.Small motor speed limit adjustment
In automatic mode: press and hold the “Enable” button and rotate the “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;
7.Tsis siv neeg txiav
The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;
8. Straight line correction
When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: Hauv phau ntawv hom, press and hold the “Enable” button and rotate the “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 to 90; correction voltage of one correction unit is about 0.02V;
9. Parameter menu (cov neeg siv raug txwv tsis pub hloov kho nws yam tsis muaj kev tso cai)
Some functions of the remote control can be adjusted through parameters. Hauv phau ntawv hom, when the small motor speed S2 is 10, thawb qhov hloov mus rau pem hauv ntej / rov qab mus rau peb zaug hauv kab, and then push it down three times in a row to enter the parameter menu;
Tawm ntawm cov ntawv qhia zaub mov parameter: choose to save or not save, then press the enable button to confirm the exit;
Maximum current: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, default 800, kev hloov kho raug txwv;
Deceleration parameter: automatic cutting control parameter. Thaum txiav tus nqi hloov tam sim no tshaj tus nqi no,deceleration begins.
Acceleration a1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Deceleration a2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Maximum walking: the maximum speed of the small motor.
Txiav tam sim no: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Lub neej ntawd ceev txwv: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Kev txwv ceev offset: the maximum speed of the small motor during automatic cutting.
Siab tshaj plaws tus tswv tsev: maximum speed of large motor.
Qhov kawg txhais txoj cai ntawm cov khoom no tsuas yog peb lub tuam txhab.
