Wire saw machine automatic cutting wireless remote control DH12S-P6S

Application:Specially used for crawler wire saw machine

1.Ajusta automáticamente velocidad Ts'ut'ubi nä'ä mä retroalimentación corriente motor, automáticamente ajusta velocidad Ts'ut'ubi basado jar retroalimentación corriente ar motor

2.Barrier-free transmission distance is 200 meters.

3. Soporta controlador DC.

4. Soporta múltiples ajustes parámetros Ts'ut'ubi, Komo corriente Ts'ut'ubi, Límite velocidad Ts'ut'ubi, etc..

5. Soporta conmutación entre ya modos t'o̲ho̲ alambre ne t'o̲ho̲ hoja. Different cutting parameters can be set in different modes.

Low power consumption design
Easy to use

Description

1.Modelo producto

Modelo: DH12S — P6S

Equipo aplicable:máquina sierra alambre yá t'o̲ho̲ hoja

2.Product accessories diagram

hñeti: Nu'i gí to da 'ñets'i 'na hñu ya antenas. Ar antena ar ventosa ar estándar ya defecto.

3.Descripción ar interruptor control remoto

4.Nthuts'i ñut'i ar contenido ar visualización

Velocidad ar motor principal: Principal: 0-50
Velocidad ar motor viajando: 'ñu: 0-50
Límite velocidad máxima motor ar viaje Ts'ut'ubi automático: Velocidad: 0-30
(Parámetros ajustables)
Nt'ot'e Ts'ut'ubi automático motor principal ar za corriente: Ajuste: 28 (Parámetros ajustables)
Velocidad ar motor brazo oscilación: Swing: 0-50

Xí hñets'i'i voltaje: Ar bateriya ar mando mbi ar xki baja, Jaki reemplazar ar bateriya.

Red caída: Ar señal inalámbrica ar interrumpida. Jaki ar mäte, compruebe ar alimentación ar receptor, Encender ma 'nagi, Ne reiniciar ar mando remoto.

5.Instrucciones operación función control remoto

1) Encienda ar mando mbi

nu'bu̲ ar receptor xí encendido , ar tsibi alimentación D2 ja ar receptor permanece encendida, ne ar tsibi señal D1 comienza parpadear ; inserte yoho baterías AA jar mando remoto, encender interruptor encendido, ne ar pantalla mostrará ar velocidad ar motor, indicando inicio exitoso.

2)Nar dätä hño motor ne control velocidad yá motor principal ne control velocidad

Presione ne sostenga “Control velocidad habilitar”, girar ar “Adelante yá Atrás” mpa̲ti ma ya'bu̲, and the receiver’s main motor will turn on;
Presione ne sostenga “Control velocidad habilitar”, girar ar “Adelante yá Atrás” switch to reverse, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Rotate the “big motor” knob to adjust the speed regulation voltage of the receiver’s main motor inverter to 0-10V;

3）Traveling motor

Presione ne sostenga “Speed Adjustment Enable”, girar ar “Adelante yá Atrás” switch to forward or backward, and the walking motor will move at a high speed of 50;

4）Swing arm motor and speed regulation

Turn the “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;

Presione ne sostenga “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” switch, the swing arm motor will move at a high speed of 50;

5）Travel motor speed limit adjustment

Press and hold the “speed adjustment enable” button and rotate the “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “forward/reverse” switch forward or backward to enter the automatic cutting mode;

7） Parameter menu (users are prohibited from modifying it without permission)

Enter the parameter menu:Jar modo manual, when the main motor speed is 0, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enterthe parameter menu;
Exit the parameter menu: Turn the speed adjustment knob, select save or not save, and press the enable button to confirm;
Rated current: Ár hmädi máximo ar corriente ar motor principal, ar xe̲ni Ampere;
Parámetros ar za ar velocidad: Parámetros control Ts'ut'ubi automático, Defecto 800, milisegundos ar xe̲ni,Nyokwi ar nyokwi;
Parámetro desaceleración: Nu'bu̲ ar cambio ar corriente Ts'ut'ubi supera nuna hmädi, desaceleración ngut'a comienza, ar xe̲ni Ampere;
Aceleración a1: nu'bu̲ corriente Ts'ut'ubi ar zu'we da corriente Ts'ut'ubi establecida, hmädi ar velocidad aumentado ya aceleración motor andando;
Deceleration a2: nu'bu̲ corriente Ts'ut'ubi ar dätä da corriente Ts'ut'ubi establecida, hmädi velocidad reducido ya desaceleración motor 'yo̲t'e;
Corriente brazo oscilación: hmädi ya defecto, Nyokwi ar nyokwi;
Pa parada: 'Me̲fa ar apagado ar sobrecarga corriente modo automático, ar corriente bí detectará ma 'nagi 'mefa xta 'nar período ya pa. Xähmö nu'bu̲ ar zu'we da corriente establecida, motor 'yo̲t'e da ndu̲i automáticamente; ar xe̲ni mfe̲tsi, hmädi predeterminado, Nyokwi ar nyokwi;
corriente máxima: Ar gama ar corriente ar retroalimentación ar motor principal, ar xe̲ni Ampere;
Anfitrión máximo: Rango ar visualización ar za velocidad ar motor principal ar control remoto;
Recorrido máximo: Parámetro hindi válido;
Desplazamiento límite velocidad: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Add and subtract the offset increment of the sensitivity parameter;
Set current: Automatic cutting, the threshold of main motor feedback current. If this value is exceeded,the walking motor starts to decelerate;Below this value, the walking motor starts to accelerate;unit: Ampere;
Idling exit: When the automatic mode starts, if the main motor feedback current is less than this value,it will be in the idling mode.If it is greaterthan this value, it will exit the idling mode and enter the cutting mode.Unit is ampere;
No-load current:When automatic mode starts, if the main motor feedback current is less than this value,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;otherwise, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;