Description
1.Modelo producto
Modelo: DH01R-4W-26K
Equipo aplicable:various industrial equipment
2.Product accessories diagram
hñeti: Nu'i gí to da 'ñets'i 'na hñu ya antenas. Ar antena ar ventosa ar estándar ya defecto.
3.Product model description
hñeti:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.
②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, with a range of 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.
④Analog input, ranging from 1 to 2, indicating that there are 1 to 2 Gi 'ñudi jar mando remoto(maximum 2 Canales); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, o) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)
These two analog quantities can be used as displays for welding current and welding voltage.
4.Características
1）Maximum 26 Canales pa salida analógica 0 — 10V;
2）Maximum 4 Rango pantalla to da modificado pa requisitos ntsuni hontho (Soporta): Canales pa salida potenciómetro 'bede aislado extendido 2 Entradas analógicas;
3）2 analog inputs; Rango pantalla ar personalizable, Salida relé parada emergencia ko contacto normalmente cerrado
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 AA batteries, low power consumption design;
6） Wireless operation distance is 200 meters;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.
5.Descripción ar interruptor control remoto
6.Display content introduction
W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)
Xí hñets'i'i voltaje: Ar bateriya ar mando mbi ar xki baja, Jaki reemplazar ar bateriya.
Red caída: Ar señal inalámbrica ar interrumpida. Jaki ar mäte, compruebe ar alimentación ar receptor, Encender ma 'nagi, Ne reiniciar ar mando remoto.
7.Instrucciones operación función control remoto
1） Turn on the remote control
nu'bu̲ ar receptor xí encendido , the receiver working indicator flashes; inserte yoho baterías AA jar mando remoto, encender interruptor encendido, and the display shows a value,indicando inicio exitoso. Ar tsibi indicadora ar 'be̲fi ar receptor ar bi pa̲ti jar sólido.
2Interruptor ne ya 'befi botón
'na operación ar interruptor giro ne botón jar mando mbi tsa̲ da controlar ar correspondiente punto salida señal interruptor ja ar receptor. Ga̲tho ya puntos salida señal interruptor ja ar receptor ya señales normalmente abiertas ya defecto;
3W1 — W4 za velocidad
Gire ya perillas jar W1 — W4 arbitrariamente pa operar ar señal ar salida analógica wa ar potenciómetro correspondiente jar extremo ar receptor. Señal salida analógica jar extremo receptor ar predeterminada ja 'nar señal voltaje 0 — 10V, ne señal potenciómetro predeterminada 0 — 5 ë;
4Función parada emergencia
Nu'bu̲ bí presiona botón parada emergencia, ga̲tho ya salidas señal ar interruptor ar desconectan ne ar salida analógica ar desconecta; después ja da bí libera ar parada emergencia, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Exit the parameter menu: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 to 9999;
F2W2 range: Ár hmädi rango visualización ar perilla W2 jar pantalla ar visualización, adjustable from 0 to 9999;
Rango F3W3: Ár hmädi rango visualización ar perilla W3 jar pantalla visualización, adjustable from 0 to 9999;
Rango F4W4: Ár hmädi rango visualización ar perilla W4 jar pantalla visualización, adjustable from 0 to 9999
Rango F5A1: Mostrar hmädi rango visualización retroalimentación ADC1, 0-5000 ajustable;
Rango F6A2: Mostrar hmädi rango visualización retroalimentación ADC2, 0-5000 ajustable;
Corriente alarma: Da t'ot'e hmädi alarma pa visualización retroalimentación ADC1 ne ADC2. Nu'bu̲ ADC1 ne ADC2 superan nuna hmädi, Pantalla ar control remoto alarmará; nu'bu̲ nuna hmädi ar 0, función alarma ar hindi válida;
8.Especificaciones eléctricas control remoto
9.Dimensiones control remoto
Seki interpretación final nuna ar producto pertenece únicamente ma empresa.
