Petishon:Specialmente uza pa mashin di zaag di crawler .
1.Sostené modo di kòrtamentu outomatiko, automaticamente ta ahusta e velocidad di cana di e motor chikito segun e coriente grandi di motor ., e ta logra kòntròl outomatiko ..
2.Distansia di transmishon sin barera ta 200 meternan.
3. Sostené regulashon di velosidat dobel pa motornan grandi i motornan chikitu.
4. Sostené motor chikitu birando na lugá.
5. Sostené i drechi wiel chikitu korekshon lineal ..
Modelo: DH12S-LD
Ekiponan aplikabel:crawler wire saw machine
Nota: Bo por skohe un di e tres antenanan .. E antena di succion ta standard pa default ..
Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (parameternan ahustabel)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)
voltahe abou: E bateria di kòntròl remoto ta muchu abou ., por fabor reemplasa e bateria ..
Ret a baha: E señal sin kabel ta wòrdu interumpí .. Por fabor check e poder di e recibidor ., poder lo riba atrobe, e reinisia e kòntròl remoto ..
1.Turn on the remote control
When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, bira riba e switch di koriente ., andthe display will show the motor speed, indikándo startup eksitoso.
2.Large motor and speed regulation
Bira e “dilanti/inverso” switch pa dilanti, the receiver’s large motor will turn on, and the display will show forward
Bira e “dilanti/inverso” switch pa reverse, the large motor of the receiver will turn on in reverse, and the display will show reverse
Rota e “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;
3.Small motor and speed regulation
Move the “dilanti/inverso” switch pa dilanti, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward
Bira e “Dilanti/Reverso” switch pa reverse, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse
4.Turn left and right
Bira e “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left
Bira e “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right
5.Turn in place
Den modo manual:
Turn left in place: Prensa y tene e “Enable” button, bira “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;
Turn right in place: Prensa y tene e “Enable” button, bira “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;
6.Small motor speed limit adjustment
Den modo outomatiko: press and hold the “Enable” boton e draai e “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;
7.Kortamentu outomátiko
The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;
8. Straight line correction
When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: Den modo manual, press and hold the “Enable” boton e draai e “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 pa 90; correction voltage of one correction unit is about 0.02V;
9. Parameter menu (usuarionan ta prohibi di modifica esaki sin permiso .)
Algun funshon di e kòntròl remoto por wòrdu ahusta pa medio di parameter .. Den modo manual, when the small motor speed S2 is 10, pusha e switch dilanti/reverso ariba tres biaha tras di otro, and then push it down three times in a row to enter the parameter menu;
Sali for di e menu di parameter .: skohe pa spar òf no spar, then press the enable button to confirm the exit;
Koriente máksimo: the operating rated current of the cutting motor is 80% of this currentt;
Parameternan di kòntròl di velosidat: automatic cutting control parameters, standart 800, modifikashon ta prohibí;
Parameter di desacelerashon: automatic cutting control parameter. Ora e balor di kambio di koriente di kòrtamentu ta surpasá e balor aki .,deceleration begins.
Aceleracion a1.: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Deselerashon a2.: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Kuminsá-blocking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Kaminata máksimo: the maximum speed of the small motor.
Cortamento actual .: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Limite di velosidat predeterminá: the default maximum speed of automatic cutting speed when turning on the machine.
Modo outomátiko: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Ofisina di límite di velosidat: the maximum speed of the small motor during automatic cutting.
Ehérsito máksimo: maximum speed of large motor.
E derecho di interpretashon final di e produkto aki ta pertenesé solamente na nos kompania ..
