2. Caracteristici ale produsului
1. Adoptați tehnologia de comunicare wireless 433MHz, Distanța de funcționare wireless este 100 meters.
2. Adoptați funcția automată de sărituri de frecvență, utilizare 32 sets of wireless remote controllers at the same time, without affecting each other.
3. Support all inverters with 485-Modbus RTU protocol. The inverter brands that have been adapted include:Shanghai Xielin, Fuji, Inovance, Zhongchen, INVT, Anchuanda. If the brand is not ada please contact us for customization.
4. Support large motor inverter start, speed regulation, and current reading.
5. Support left and right crawler inverter speed regulation, start, front and back left and right control.
6. Support left and right crawler inverter straight line correction to keep the machine moving in a straight line.
7. Support rope saw automatic cutting function, automatically adjust the left and right crawler speed in real time according to the large motor current information.
8. În același timp, it is compatible with direct IO output to control the start and stop of the motor, and analog voltage output to control the motor speed.

3. Specificații ale produsului

4. Prezentarea funcției produsului

Note:
①Screen display:

②Mode switch:
Using a 2-level switch, it is possible to switch between automatic and manual modes, and the corresponding mode will be displayed on the screen for switching.
③ Enable:
Combination buttons, some operations require holding down the enable button for operation, please refer to the instructions for each switch for details.
④ Large motor switch:
Using a 3-speed reset switch, pulling this switch can control the forward and reverse rotation of the large motor. După ce l-a eliberat, the state will remain, and there will be corresponding displays on the screen. The t arrow indicates forward rotation, and the y arrow indicates reverse rotation.
⑤Small motor forward/reverse switch:
Using a 3-speed self-locking switch, pulling this switch can control the small motor to move forward and backward. The corresponding display will show on the screen, with the t arrow indicating forward and the ↓ arrow indicating backward.
⑥Remote control power switch:
The remote control display screen is turned on.
⑦ small motor turning switch:
Using a 3-speed reset switch, when manually operated, the small motor can be controlled to turn left or right. Once released, the remote control will automatically stop this action.When in the forward state, turn this switch and the corresponding display will appear on the screen.The + arrow indicates left turn, and the – arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen.The + arrow indicates left turn, and the – arrow indicates right turn.Press and hold the enable button, then turn this switch to perform a stationary turning function, making the turn faster.
⑧ Large motor speed regulation:
Using a multi turn encoder knob, rotate the knob to adjust the speed S1 of the large motor For every 1 grid rotation, the speed value of the large motor changes by approximately 0.2 units, and rapid rotation can quickly modify the speed value of the large motor.
9 Small motor speed regulation (linear correction):To use the multi turn encoder knob, in manual mode, for every 1 turn of the knob, the speed value of the small motor changes by approximately 0.1 units. Fast rotation can quickly modify the speed value of the small motor.
In automatic mode, press the enable button and rotate 1 grid each time. The speed limit value F of the small motor changes by approximately 0.1 units. Rapid rotation can quickly modify the speed limit value of the small motor.Press the enable button, turn the knob to the right, and the straight line correction display shows D f: stânga. Each rotation of the knob increases by 1 unit; Turn left knob, straight line correction display: Df: corect. Each rotation of the knob increases by 1 unit, and each correction unit corresponds to a motor speed control AVI voltage of about 0.02 V.

5. Schema de accesorii pentru produs

6. Ghid de instalare a produsului
6.1 Pași de instalare a produsului
1. Install the receiver in the electrical cabinet through the buckle on the back, or install it in the electrical cabinet through the screw holes at the four corners of the receiver.
2. Consultați diagrama de cablare a receptorului nostru, compare your on-site equipment, and connect the equipment to the receiver through wires.
3. După fixarea receptorului, antena echipată cu receptorul trebuie conectată, iar capătul exterior al antenei trebuie instalat sau plasat în afara dulapului electric. Este recomandat să îl așezați în partea de sus a dulapului electric pentru cel mai bun efect de semnal. It is forbidden to leave the antenna unconnected or place the antenna inside the electrical cabinet, which may cause poor signal and unusable.
4. În cele din urmă, install the battery in the remote control, tighten the battery cover, and then turn on the power switch of the remote control. After the remote control display shows the normal working interface, you can perform remote control operation.

6.2 Dimensiuni de instalare a receptorului

6.3 Diagrama de referință a cablului receptorului

7. Instrucțiuni de funcționare a produsului
7.1 Remote Control Parameter Settings
How to enter the background parameters of the remote controller: turn the mode switch to manual mode, adjust the speed of the small motor to 25, sau 0, 10, 20, 40, 50, and turn the forward switch of the large motor upwards 3 times and downwards 3 times;
Use the “Small Motor Speed Control” knob to turn the page, press Enable and turn the small motor speed control knob to modify the parameters; after modification, turn the page to the end, select Save and Exit, and press the Enable button to exit the menu;

The parameters are as follows:Maximum current: large motor current feedback value range, setting range 15-200A, default 60;

Speed control parameters: automatic mode small motor automatic acceleration speed, the smaller the faster, setting range 200-1500, default 1000;

Deceleration parameter: Set the upper limit of the motor speed change allowed. When the current changes beyond this value, it will decelerate. The smaller it is, the faster the left and right motors will decelerate. The range is 05-12, and the default is 06;

Acceleration a1: The larger the value, the faster the motor speed increases, range 00-06,default 01; Deceleration a2: The larger the value, the faster the motor speed decreases, range 00-06, default 02;

Enable speed regulation: Whether the small motor speed regulation needs to be enabled, 00 is not enabled, 01 is enabled, default 01;

Startup self-locking: Whether the large motor will automatically keep self-locking after the forward and reverse switch is released, 00 is not maintained, 01 is maintained, default 01;

Maximum travel: Maximum speed of the left and right motors, range 10-100, default 50;

Cutting current: Maximum cutting current, the screen displays IC value, range 15-160, default 30, the screen displays IC: 30. The upper limit of this parameter = maximum current x 80%;

Default speed limit: The default small motor automatic cutting speed at startup, range 00-100, default 10, the screen displays F1.0, this parameter is only accurate when the maximum travel is set to 50.

Wireless channel: Default is 10. When the remote control signal is unstable or there is signal interference on site, you can modify this parameter to switch channels to avoid interference;

Speed limit offset: The upper limit of the automatic cutting speed of the small motor,range 00-200, default 60, the screen displays 6.0; Display value upper limit = speed limit offset × 0.1;

Maximum host: The maximum speed of the large motor, range 10-100, default 50;

Mbus device ( mandatory ): large motor inverter model selection, range 00-03, default 03;

00- Shanghai Xielin 01 Fuji
02- INVT 03 Inovance（Zhongchen, Robicon）

SBUS equipment (mandatory): Small motor frequency converter model selection, range 00-05, default 03;
00- Shanghai Xielin 01 Fuji
02- INVT 03 Inovance（Zhongchen, Robicon）
04-Anchuanda 05-None

8. Product troubleshooting

7.2 Parameter setting of frequency converter
1. Command source selection: Communication command channel
2. Main frequency source selection: communication given
3. Baud rate: 19200
4. Data format: No verification, data format<8-N-1>
5. Local address: Set the left frequency converter to 1, the right frequency converter to 2, and the large motor frequency converter to 3

7.3 Remote Control Operation Instructions
1. Power on the machine, porniți telecomanda, enter the remote control background, set the remote control background parameters, mainlyIt is to set the models of small and large motor frequency converters (skip this step if the machine manufacturer has already set them);
2. Set the parameters of the frequency converter (skip this step if the machine manufacturer has already set it);
3. Set the remote control to manual mode, and then use the remote control to move the machine to the working position;
4. In manual mode, set the IC value for the cutting current of the large motor and the speed of the large motor;
5. Switch to automatic mode and set the cutting speed limit F value for the small motor;
6. In automatic mode, turn the large motor switch to forward to start the large motor, and then turn the small motor switch to forward or reverse. The remote control enters automatic cutting mode and begins cutting.

9.Întreţinere
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Dacă nu este folosit de mult timp, please remove the battery and store the remote control and battery in a clean and safe place.
6.În timpul depozitării și transportului, attention should be paid to moisture and shock resistance.

10. Informații de siguranță
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by insufficient power, which may result in the remote control being unable to operate.
3. Dacă este necesară reparația, Vă rugăm să contactați producătorul. Dacă daunele sunt cauzate de auto -reparație, Producătorul nu va oferi garanție

The remote control for automatic cutting of track car rope saw is suitable for track type rope saw
cutting machines. It uses the 485 Modbus RTU protocol to control the left and right track frequency
converters, as well as the large motor frequency conversion speed control start and the front, rear,
left and right direction controllers. And it can read the working current of the large motor frequency
converter through the 485 Modbus RTU protocol. By analyzing and comparing the current of the
large motor, the speed of the left and right tracks can be automatically adjusted in real time to
achieve automatic cutting function.

2. Caracteristici funcționale ale produsului

1. Adopting 433MHz wireless communication technology, cu o distanță de funcționare wireless de 100 meters.
2. Adoptați funcția automată de salt de frecvență și utilizați 32 sets of wireless remote controllers
simultaneously, without affecting each other.
3. Supports all frequency converters with 485 Modbus RTU protocol, and currently compatible frequency
converter brands include:Shanghai Xielin, Fuji, Huichuan, Zhongchen, INVT, şi . For brands
that are not compatible, please contact us for customization.
4. Reglementarea vitezei de susținere, pornire, and current reading of large motor frequency converters.
5. Sprijină Reglementarea vitezei convertorului de frecvență la stânga și dreapta și dreapta, pornire, faţă, spate, left and right control.
6. Support linear correction of left and right track frequency converters to keep the machine walking in a
straight line.
7. Support automatic cutting function of rope saw, automatically adjust the left and right track speed in
real time according to the current information of the large motor.
8. It is also compatible with direct IO output control for motor start and stop, and analog voltage output
control for motor speed.

3. Specificații ale produsului

4. Introducerea funcției produsului

Note:
①Screen display:

②Mode switch:

③Enable:
Combination buttons, some operations require holding down the enable button for operation,see the instructions for each switch for details.
④Large motor switch:
Using a 3-speed reset switch, pulling this switch can control the forward and reverse rotation of the large motor. După ce l-a eliberat, the state will remain, and there will be corresponding displays on the screen. The S1↑ arrow indicates forward rotation, and the S1 ↓ arrow indicates everse rotation.
⑤Small motor forward/reverse switch:
The small motor is equipped with a 3-speed self-locking switch in front of it. Pressing the enable button and pulling this switch can control the small motor to move forward and backward, and the corresponding display will appear on the screen.The ↑↑ arrow represents forward, and the ↓↓ arrow represents backward.
⑥ Straight line correction:
Using a multi turn encoder knob, press the enable button, turn the knob right, and display the straight line correction: Df: The left turn knob increases by 1 unit per rotation, and the left
motor speed increases by 0.1 unit; Turn left knob, straight line correction display: Df: On the right, every turn of the knob increases by 1 unit, and the speed of the right motor increases
by 0.1 unit.
⑦Small motor turning switch:
Using a 3-speed reset switch, when manually operated, the small motor can be controlled to turn left or right. Once released, the remote control will automatically stop this action. In the forward state, when this switch is turned, the corresponding display will appear on the screen. The ←↑ arrow indicates left turn, and the ↑→ arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen. The ←↓ arrow indicates left turn, and the ↓→ arrow indicates right turn.
⑧ Large motor speed regulation:
Using a multi turn encoder knob, rotating 1 grid each time, the speed value of the large motor changes by approximately 0.2 units. Fast rotation can quickly modify the speed value of the large motor.
⑨ Small motor speed regulation:
Using a multi turn encoder knob, in manual mode, press the enable button and then rotate one grid at a time，the speed value of the left and right small motors changes by about 0.1 units, and quick rotation can quickly modify the speed value of the small motor.In automatic mode, press the enable button and rotate one grid at a time,the speed limit value F of the small motor changes by approximately 0.1 units. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote control power switch
The remote control display screen is turned on.

5. Schema de accesorii pentru produs

6. Ghid de instalare a produsului
6.1 Pași de instalare a produsului
1. Instalați receptorul în dulapul electric prin catarama de pe spate, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Consultați diagrama de cablare a receptorului și comparați-o cu echipamentul dvs. la fața locului. Connect the equipment to the receiver through wires.
3. După fixarea receptorului, it is necessary to connect the antenna equipped with the receiver and install or place the outer end of the antenna outside the electrical cabinet. Este recomandat să îl așezați în partea de sus a dulapului electric pentru cel mai bun efect de semnal. It is forbidden to leave the antenna unconnected or place it inside the electrical cabinet, as it may cause the signal to be unusable.
4. În cele din urmă, install the battery on the remote control, tighten the battery cover, and turn on the power switch of the remote control. After the remote control display screen shows the normal
working interface, remote control operations can be performed.

6.2 Dimensiuni de instalare a receptorului

6.3 Diagrama de referință a cablului receptorului

7. Instrucțiuni de funcționare a produsului
7.1 Remote Control Parameter Settings
Method to enter the remote control backend parameters:

Turn the mode switch to manual mode, adjust the speed of the small motor to 25 on both sides, sau 0, 10, 20, 40, 50 on all sides, and continuously turn the forward switch of the large motor up 3 times and down 3 times;
Use the “Small Motor Speed Control” knob to flip pages, press the enable button, and then turn the small motor speed control knob to modify parameters. After modification, turn the page to the end,select “Save” to exit, and press the enable button to exit the menu;
The parameters are as follows:
Maximum current: feedback range of large motor current, set range 15-200A, default 100;
Speed control parameters: Automatic mode, small motor automatically accelerates faster or slower,the smaller the faster, set range 200-1500, default 800;
Deceleration parameter: Set the upper limit that allows the motor speed to change. When the current changes beyond this value, the deceleration will occur. The smaller, the faster the deceleration of the left and right motors, cu o gamă de 05-12 and a default of 06;
Acceleration a1: The larger the motor speed, the faster it increases, cu o gamă de 00-06 and a default of 01;
Deceleration a2: The larger the motor speed, the faster it decreases, cu o gamă de 00-06 and a default of 02;
Enable speed regulation: Does the small motor speed regulation need to be enabled? 00 does not enable, 01 enables, default is 01;
Start self-locking: Does the large motor automatically maintain self-locking after the forward and reverse switches are released? 00 does not hold, 01 holds, default 01
Maximum walking: maximum speed of left and right motors, range 10-100, default 50;
Cutting current: maximum cutting current, displayed on the screen as IC value, range 15-160, default 30,
corresponding to IC: 30 displayed on the screen. The upper limit of this parameter is 80% of the maximum current;
Default speed limit: The default small motor automatic cutting speed when turned on is within the range of 0-100, with a default of 10. The screen displays F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Automatic mode: Set to 00, the automatic/manual switch is a mode switch. Set to 01, the automatic/manual switch is set to the automatic position, the display screen shows lighting, and the automatic terminal output on the receiver is closed. When set to manual, the automatic output terminal is disconnected;
Speed limit deviation: The upper limit of the automatic cutting speed of the small motor ranges from 00 la 200, with a default of 60 and a corresponding display of 6.0 on the screen; Upper limit of display value=speed limit offset x 0.1;
Maximum host: maximum speed of the large motor, range 10-100, default 50;
Mbus equipment (mandatory): Selection of large motor frequency converter model, range 00-03, default 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）
SBUS equipment (mandatory): Small motor frequency converter model selection, range 00-05, default 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）

04-Anchuanda 05-None

7.2 Parameter setting of frequency converter
1. Command source selection: Communication command channel
2. Main frequency source selection: communication given
3. Baud rate: 19200
4. Data format: No verification, data format<8-N-1>
5. Local address: Set the left frequency converter to 1, the right frequency converter to 2, şi
the large motor frequency converter to 3
7.3 Remote Control Operation Instructions
1. Power on the machine, porniți telecomanda, enter the remote control backend, set the
remote control backend parameters, mainly setting the small motor and large motor frequency
converter models: (skip this step if the machine manufacturer has already set it);
2. Set the parameters of the frequency converter (skip this step if the machine manufacturer
has already set it);
3. Set the remote control to manual mode, and then use the remote control to move the machine to
the working position;
4. In manual mode, set the cutting current of the large motor to IC and the speed of the large motor
5. Switch to automatic mode and set the cutting speed limit F value for the small motor;
6. In automatic mode, turn the large motor switch to forward to start the large motor, then turn
the small motor switch to forward or reverse, and the remote control enters automatic cutting
mode to start cutting.

8.Product troubleshooting

9.Întreţinere
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Dacă nu este folosit de mult timp, please remove the battery and store the remote control and battery in a clean
and safe place.
6.În timpul depozitării și transportului, attention should be paid to moisture and shock resistance.

10. Informații de siguranță
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by
insufficient power, which may result in the remote control being unable to operate.
3. Dacă este necesară reparația, Vă rugăm să contactați producătorul. Dacă daunele sunt cauzate de auto -reparație, the manufacturer
will not provide warranty.

Model: DH01R-4W-26K

Echipamente aplicabile:diverse echipamente industriale

2.Diagrama de accesorii pentru produse

Nota: Puteți alege una dintre cele trei antene. The suction cup antenna is standard by default.

3.Descrierea modelului produsului

Nota:
① Seria DH01R, dacă sufixul conține T, înseamnă cu ieșire de oprire de urgență;fara T, it means without emergency stop output.

②Dacă nu există ieșire analogică, nu este nevoie să remarci 0W sau 0R; mărimile analogice W1, W2, W3, și W4 implicit la ieșire de tensiune analogică 0-10V; în același timp, W1 și W2 pot fi extinse la 2 ieșiri potențiometre digitale izolate, cu o gamă de 0 -5K ohmi, ½ watt; rezoluţie: 20 ohmi. Cele două potențiale digitale pot fi utilizate pentru a controla curentul de sudare și tensiunea de sudare a aparatului de sudură. Dacă este necesară ieșirea potențiometrului digital, user notes are required.

④Intrare analogică, variind de la 1 la 2, indicând că există 1 la 2 Intrări analogice(maxim 2 canale); când există o intrare analogică, trebuie să rețineți domeniul de tensiune al intrării analogice (receptorul nostru este implicit 0 -5V, utilizatorul poate nota și ca 4-20 mA sau 0-10V, etc.) și intervalul de afișare corespunzător al mărimii analogice (de exemplu: afişa 0-100 volți sau 0-1000 amperi)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Caracteristici

1)Maxim 26 ieșiri releu;
2)Maxim 4 canale de ieșire analog 0-10V (Gama de afișare poate fi personalizată): Suport 2 canale de ieșire extinsă de potențiometru digital izolat;
3）2 intrări analogice; și afișat pe telecomandă, Gama de afișare poate fi personalizată
4）1 canal de ieșire releu de oprire de urgență contacte normal închise;
5) Cu sprijinul 3 Baterii AA, design cu consum redus de energie;
6） Distanța de operare fără fir este 200 metri;
7）Grad de protecție IP67;
8） Cu comutator încrucișat, acceptă două comutatoare încrucișate în 4 direcții;
9）Back strap design.

5.Descrierea comutatorului telecomenzii

6.Afișează introducerea conținutului

Valoarea butonului W1: W1: 0-1000 (parametru reglabil 0-9999)
Valoarea butonului W2: W2: 0-5000 (parametru reglabil 0-9999)
Valoarea butonului W3: W3: 0-5000 (parametru reglabil 0-9999)
Valoarea butonului W4: W4: 0-5000 (parametru reglabil 0-9999)
Afișaj de feedback ADC1: 0-1000 (parametru reglabil 0-5000)
Afișaj de feedback ADC2: 0-1000 (parametru reglabil 0-5000)

Tensiune joasă: Bateria telecomenzii este prea scăzută, please replace the battery.

Rețeaua a căzut: Semnalul wireless este întrerupt. Vă rugăm să verificați puterea receptorului, porniți-l din nou, and restart the remote control.

7.Instrucțiuni de utilizare a funcției telecomenzii

1） Porniți telecomanda
Când receptorul este pornit, indicatorul de funcționare al receptorului clipește; instalați două baterii AA în telecomandă, porniți întrerupătorul de alimentare, iar afișajul arată o valoare,indicând o pornire reușită. The receiver working indicator light becomes solid.
2）Funcții comutatoare și butoane
Orice operare a comutatorului de răsucire și a butonului de pe telecomandă poate controla punctul de ieșire a semnalului comutatorului corespunzător de pe receptor. Toate punctele de ieșire a semnalului de comutare de pe receptor sunt în mod normal semnale deschise în mod implicit;
3）Reglarea vitezei W1-W4
Rotiți în mod arbitrar butoanele din W1-W4 pentru a opera semnalul de ieșire analogic corespunzător sau semnalul potențiometrului de la capătul receptorului. Semnalul analogic de ieșire de la capătul receptorului este implicit la un semnal de tensiune 0-10V, iar semnalul potențiometrului este implicit la 0-5K;
4） Funcția de oprire de urgență
Când butonul de oprire de urgență este apăsat, toate ieșirile semnalului comutatorului sunt deconectate și ieșirea analogică este deconectată; după ce oprirea de urgență este eliberată, toate semnalele comutatorului sunt restabilite și ieșirea analogică este restabilită; 5 secunde după ce telecomanda este oprită, toate ieșirile semnalului comutatorului sunt deconectate și cantitățile analogice rămân neschimbate. Când telecomanda este pornită, ieșirile semnalului comutatorului se recuperează automat;
5）Meniu parametri (utilizatorilor le este interzis să îl modifice în mod privat)
Unele funcții ale telecomenzii pot fi reglate prin parametri. Când afișajul W1=0, apăsați butonul K9-B 3 ori la rând, apoi apăsați butonul K9-A 3 de ori la rând pentru a intra în meniul parametrilor; Tasta K9-A și K9-B pentru a parcurge meniul și a selecta parametrii; țineți apăsat K1-A, și apoi apăsați butonul K9-A/B pentru a modifica parametrii;
Ieșiți din meniul parametri: alege să salvezi sau nu, apoi apăsați butonul K1-A pentru a confirma ieșirea;
Gama F1W1: Valoarea intervalului de afișare a butonului W1 de pe ecranul de afișare, reglabil de la 0 la 9999;
Gama F2W2: Valoarea intervalului de afișare a butonului W2 de pe ecranul de afișare, reglabil de la 0 la 9999;
Gama F3W3: Valoarea intervalului de afișare a butonului W3 de pe ecranul de afișare, reglabil de la 0 la 9999;
Gama F4W4: Valoarea intervalului de afișare a butonului W4 de pe ecranul de afișare, reglabil de la 0 to 9999
Gama F5A1: Afișează valoarea intervalului de afișare a feedback-ului ADC1, 0-5000 reglabil;
Gama F6A2: Afișează valoarea intervalului de afișare a feedback-ului ADC2, 0-5000 reglabil;
Curent de alarma: Setați valoarea alarmei pentru afișarea feedback-ului ADC1 și ADC2. Când ADC1 și ADC2 depășesc această valoare, display-ul telecomenzii va alarma; când această valoare este 0, funcția de alarmă este invalidă;

8.Caracteristicile electrice ale telecomenzii

9.Dimensiunea telecomenzii

The final interpretation right of this product belongs only to our company.

Model: DH12S-P6S

Echipamente aplicabile:wire saw/blade saw machine

2.Diagrama de accesorii pentru produse

Nota: Puteți alege una dintre cele trei antene. The suction cup antenna is standard by default.

3.Descrierea comutatorului telecomenzii

4.Displaycontent introduction

Main motor speed: Main: 0-50
Traveling motor speed: Line: 0-50
Maximum speed limit of automatic cutting traveling motor: Speed: 0-30
(parameters adjustable)
Automatic cutting main motor setting current: Setting: 28 (parameters adjustable)
Swing arm motor speed: Swing: 0-50

Tensiune joasă: Bateria telecomenzii este prea scăzută, please replace the battery.

Rețeaua a căzut: Semnalul wireless este întrerupt. Vă rugăm să verificați puterea receptorului, porniți-l din nou, and restart the remote control.

5.Instrucțiuni de utilizare a funcției telecomenzii

1）Turn on the remote control

Când receptorul este pornit, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; instalați două baterii AA în telecomandă, porniți întrerupătorul de alimentare, and the display will show the motor speed, indicating successful startup.

2）Large motor and speed regulation/Main motor and speed regulation

Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to forward, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to reverse, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Rotate the “big motor” knob to adjust the speed regulation voltage of the receiver’s main motor inverter to 0-10V;

3）Traveling motor

Press and hold “Speed Adjustment Enable”, turn the “Forward/Reverse” switch to forward or backward, and the walking motor will move at a high speed of 50;

4）Swing arm motor and speed regulation

Turn the “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;

Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” switch, the swing arm motor will move at a high speed of 50;

5）Travel motor speed limit adjustment

Press and hold the “speed adjustment enable” button and rotate the “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “forward/reverse” switch forward or backward to enter the automatic cutting mode;

7） Parameter menu (users are prohibited from modifying it without permission)

Enter the parameter menu:In manual mode, when the main motor speed is 0, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enterthe parameter menu;
Ieșiți din meniul parametri: Turn the speed adjustment knob, select save or not save, and press the enable button to confirm;
Rated current: The maximum value of the main motor current, unit Ampere;
Speed adjustment parameters: Automatic cutting control parameters, default 800, unit milli second,modification is prohibited;
Deceleration parameter: When the cutting current change value exceeds this value, rapid deceleration begins, unit Ampere;
Acceleration a1: When the cutting current is lower than the set cutting current, the speed value increased by each acceleration of the walking motor;
Deceleration a2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, modification is prohibited;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, modification is prohibited;
Maximum current: The range of main motor feedback current, unit Ampere;
Maximum host: Remote control main motor speed adjustment display range;
Maximum walking: Invalid parameter;
Speed limit offset: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Add and subtract the offset increment of the sensitivity parameter;
Set current: Automatic cutting, the threshold of main motor feedback current. If this value is exceeded,the walking motor starts to decelerate;Below this value, the walking motor starts to accelerate;unit: Ampere;
Idling exit: When the automatic mode starts, if the main motor feedback current is less than this value,it will be in the idling mode.If it is greaterthan this value, it will exit the idling mode and enter the cutting mode.Unit is ampere;
No-load current:When automatic mode starts, if the main motor feedback current is less than this value,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;otherwise, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;

6.Caracteristicile electrice ale telecomenzii

7.Dimensiunea telecomenzii

The final interpretation right of this product belongs only to our company.

Model: DH12S-LD

Echipamente aplicabile:crawler wire saw machine

Diagrama de accesorii pentru produse

Nota: Puteți alege una dintre cele trei antene. The suction cup antenna is standard by default.

Descrierea comutatorului telecomenzii

Displaycontent introduction

Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (parameters adjustable)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)

Tensiune joasă: Bateria telecomenzii este prea scăzută, please replace the battery.

Rețeaua a căzut: Semnalul wireless este întrerupt. Vă rugăm să verificați puterea receptorului, porniți-l din nou, and restart the remote control.

Instrucțiuni de utilizare a funcției telecomenzii

1.Turn on the remote control

When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, porniți întrerupătorul de alimentare, andthe display will show the motor speed, indicating successful startup.

2.Large motor and speed regulation

Turn the “forward/reverse” switch to forward, the receiver’s large motor will turn on, and the display will show forward

Turn the “forward/reverse” switch to reverse, the large motor of the receiver will turn on in reverse, and the display will show reverse

Rotate the “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;

3.Small motor and speed regulation

Move the “forward/reverse” switch to forward, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward

Turn the “Forward/Reverse” switch to reverse, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse

4.Turn left and right

Turn the “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left

Turn the “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right

5.Turn in place

In manual mode:
Turn left in place: Press and hold the “Enable” button, turn the “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;

Turn right in place: Press and hold the “Enable” button, turn the “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;

6.Small motor speed limit adjustment

In automatic mode: press and hold the “Enable” button and rotate the “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;

7.Automatic cutting

The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;

8. Straight line correction

When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: In manual mode, press and hold the “Enable” button and rotate the “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 la 90; correction voltage of one correction unit is about 0.02V;

9. Parameter menu (users are prohibited from modifying it without permission)

Unele funcții ale telecomenzii pot fi reglate prin parametri. In manual mode, when the small motor speed S2 is 10, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enter the parameter menu;
Ieșiți din meniul parametri: alege să salvezi sau nu, then press the enable button to confirm the exit;
Maximum current: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, default 800, modification is prohibited;
Deceleration parameter: automatic cutting control parameter. When the cutting current change value exceeds this value,deceleration begins.
Acceleration a1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Deceleration a2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Maximum walking: the maximum speed of the small motor.
Cutting current: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Default speed limit: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Speed limit offset: the maximum speed of the small motor during automatic cutting.
Maximum host: maximum speed of large motor.

Caracteristicile electrice ale telecomenzii

Dimensiunea telecomenzii

The final interpretation right of this product belongs only to our company.