Руководство по эксплуатации проводного электронного маховика

xia xiaoqin — Wed, 05 Nov 2025 06:13:13 +0000

1. Введение продукта

Electronic handwheel is used for manual guidance, позиционирование, Выравнивание инструмента, и другие операции на станках с ЧПУ. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, увеличение, buttons, andother signals through communication.

2.Функциональные функции продукта

1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 meters.

2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, выбор оси, увеличение, and other information.

3. Поддержка кнопки экстренной остановки, Переключить выход сигнала ввода, and the hand wheel shutdown emergency stop is still valid.

4. Поддерживает 6 пользовательские кнопки, switch IO signals, and can output signals to the system through IO wiring or communication.

5. Поддерживает 6 или 8 управление осью, with switch IO signals that can be output to the system through IO wiring or communication.

6. Поддерживает 3 или 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.

7. Поддержка импульса, 100 pulses/turn, can output signals to the system through AB pulse wiring.

8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.

3. Спецификации продукта

Handwheel working power supply voltage	DC24V/1A
Напряжение питания приемника	DC24V/1A
Receiver IO output load range	DC24V
Hand wheel end cable length	10м
Receiver end cable length	1м
Receiver end network cable length	3м
Operating temperature	-25℃<Х<55℃
Anti-fall height	1м
Custom Button Quantity	6
Product dimensions	23390.777.4（mm）

4.Введение функции продукта

Примечание:

Emergency stop button:

Нажмите кнопку аварийной остановки, и два набора выходов ввода-вывода аварийной остановки на приемнике будут отключены, and all functions of the handwheel will be invalid.

After releasing the emergency stop, the emergency stop IO output on the receiver is closed, and all functions of the handwheel are restored.

② Screen display:

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.

PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.

③ Custom button:

6 пользовательские кнопки, каждый соответствует точке вывода ввода-вывода на приемнике, also connected to the system through communication.

④ Axis selection switch:

The axis selection switch can switch the movement axis controlled by the handwheel.

⑤ Enable button:

Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.

⑥ Magnification switch:The magnification switch can switch the magnification

controlled by the handwheel.

⑦ Pulse encoder:

Нажмите и удерживайте кнопку включения, встряхните импульсный энкодер, излучать импульсный сигнал, and control the movement of the machine axis.

⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Диаграмма аксессуаров продукта

6. Руководство по установке продукта
6.1 Шаги установки продукта

1. Install the receiver into the electrical cabinet through the screw holes at the four corners.

2. Обратитесь к нашей схеме подключения приемника и сравните ее с оборудованием на месте. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.

3. После исправления приемника, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

6.2 Установка приемника

6.3 Installation dimensions of aviation plugs

6.4 Справочная диаграмма подключения приемника
7.Инструкции по эксплуатации продукта

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.

5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.

6. Выберите увеличение: Switch the magnification switch and select the magnification level you need.

7. Движущаяся ось: Нажмите и удерживайте кнопку включения, выберите переключатель выбора оси, выберите переключатель увеличения, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.

8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.

9. Нажмите кнопку аварийной остановки, соответствующий выход аварийной остановки IO приемника будет отключен, функция маховика будет отключена, отпустить кнопку аварийной остановки, выход аварийного останова IO будет закрыт, and the handwheel function will be restored.

8.Описание модели продукта

① LXWGP represents a wired appearance style, and the receiver communication interface

is an Ethernet interface.

② : Represents Siemens system specific.

③ : represents the number of axis selection switches, represents axes, and represents

axes.

④ : represents the type of axis selection and magnification signal, A represents

point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Обслуживание

1. Please use it in a dry environment at room temperature and pressure to extend its service life.

2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.

3. Please keep the appearance of the handwheel clean to extend its service life.

4. Пожалуйста, избегайте сжимания, падение, наталкивание, и т. д.. to prevent damage to the precision components inside the handwheel or accuracy errors.

5. Если не используется в течение долгого времени, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.

11. Информация о безопасности

1. Please read the instructions carefully before use and prohibit non professionals from operating.

2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;

3. Если требуется ремонт, Пожалуйста, свяжитесь с производителем. Если ущерб вызван самостоятельным ремонтом, Производитель не предоставит гарантию

Без рубрики – Технология Wixhc

Руководство по эксплуатации проводного электронного маховика