فينڪ وقف وائرلیس اليڪٽرانڪ هينڊيليل

وضاحت

1.پيداوار جو تعارف

Wireless electronic handwheel is used for manual guidance, پوزيشننگ, tool alignment,and other operations on CNC machine tools. هي پراڊڪٽ وائرلیس ٽرانسميشن ٽيڪنالاجي کي اختيار ڪري ٿي, eliminating the traditional spring wire connection, ڪيبل جي ڪري پيدا ٿيندڙ سامان جي ناڪامين کي گهٽائڻ, eliminating the disadvantages of cable dragging and oil stains, ۽ آپريشن کي وڌيڪ آسان بڻائي رهيو آهي. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,magnification, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. پيداوار خاصيتون
1. 433mhz وائرلیس مواصلات ٽيڪنالاجي کي اپنائڻ, وائرليس آپريشن جو مفاصلو آهي 40 وارا;
2. خودڪار فریکوئنسي هپنگ فنڪشن کي اختيار ڪيو, استعمال ڪريو 32 sets of wireless remote controllers at the same time without affecting each other;
3. هنگامي اسٽاپ بٽڻ کي سپورٽ ڪريو, آئي او سگنل محصول کي مٽايو, connected to the system through IO wiring;
4. مدد ڪريو 4 ڪسٽم بٽڻ, آئي او سگنل کي مٽايو, آئوٽ لنڪ پروٽوڪول ذريعي سسٽم کي آئوٽ آئوٽ سگنل;
5. سپورٽ تڪڙو حرڪت واري بٽڻ کي سپورٽ ڪريو + ۽ بٽڻ -, پريس کي منتقل ڪرڻ لاء بٽڻ کي دٻايو ۽ مشين کي منتقل ڪرڻ لاء;
6. 6-محور ڪنٽرول جي حمايت ڪريو, آئي او سگنل کي مٽايو, آئوٽ لنڪ پروٽوڪول ذريعي سسٽم کي آئوٽ آئوٽ سگنل;
7. Support 1X,10ايڪس, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

نوٽ:
①Emergency stop button:
ايمرجنسي اسٽاپ بٽڻ کي دٻايو, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 ڪسٽم بٽڻ, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Press and hold the enable button and shake the pulse encoder to send out a pulse
signal to control the movement of the machine axis.
⑨Power switch:
Handwheel power button.

5.Product accessories diagram

6.پروڊڪٽ انسٽاليشن گائيڊ

6.1 پروڊڪٽ انسٽاليشن جا قدم

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.اسان جي رسيور وائرنگ ڊاگرم جو حوالو ڏيو, compare it with your on-site equipment, and connect
the equipment to the receiver via cables.
3. وصول ڪندڙ کي طئي ڪرڻ بعد, اينٽينا وصول ڪندڙ سان ليس آهي,
۽ اينٽينا جو ٻاهرين اختتام لازمي طور تي انسٽال ڪيو ويو آهي يا بجليء واري ڪابينا کان ٻاهر رکيل آهي.
اهو انهي کي بهترين سگنل اثر لاء برقي ڪيبنٽ تي رکڻ جي لاء سفارش ڪئي وئي آهي. It
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4.آخرڪار, turn on the handwheel power switch and you can operate the machine by
handwheel remote control.

6.2 وصول ڪندڙ جي انسٽاليشن جي ماپ

6.3 وصول ڪندڙ وائرنگ ريفرنس ڊاگرام

7. Maintenance and care

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
the service life;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. مهرباني ڪري نچوڙڻ کان پاسو ڪريو, فوجي زڪڻ, ٽوڪفت, وغيره. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. جيڪڏهن گهڻو وقت لاء استعمال نه ڪيو ويو آهي, مهرباني ڪري هٿ ونڊيل کي صاف ۽ محفوظ جاء تي ذخيرو ڪريو;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Please read the instructions carefully before use. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. جيڪڏهن مرمت جي ضرورت آهي, مهرباني ڪري ڪارخاني سان رابطو ڪريو. If the damage is caused by self-repair,
ڪاريگر وارنٽي فراهم نه ڪندو.