ڪريلر وائر مشين پاڻمرادو وائرليس ريموٽ ريموٽ ڪنٽرول ڊي ايڇ 15 ايس ايل ڊي

وصف

پيداوار ماڊل

ماڊل: DH12S-LD

قابل اطلاق سامان:crawler wire saw machine

مصنوعات جي لوازمات جو خاڪو

نوٽا آهن: توھان ٽن اينٽينن مان ھڪڙو چونڊي سگھو ٿا. سکشن کپ اينٽينا معياري طور تي معياري آهي.

ريموٽ ڪنٽرول سوئچ جي وضاحت

ڊسپلي مواد جو تعارف

Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (parameters adjustable)
Linear correction value: ڊي اين D: -99-99 (1 unit is about 0.02V)

گھٽ وولٹیج: ريموٽ ڪنٽرول جي بيٽري تمام گهٽ آهي, مهرباني ڪري بيٽري تبديل ڪريو.

نيٽ ورڪ ختم ٿي ويو: وائرليس سگنل ۾ مداخلت ڪئي وئي آهي. مهرباني ڪري وصول ڪندڙ جي طاقت چيڪ ڪريو, ان کي ٻيهر طاقت ڏيو, ۽ ريموٽ ڪنٽرول ٻيهر شروع ڪريو.

ريموٽ ڪنٽرول فنڪشن آپريشن هدايتون

1.Turn on the remote control

When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, پاور سوئچ کي چالو ڪريو, andthe display will show the motor speed, ڪامياب شروعات جو اشارو.

2.Large motor and speed regulation

ڦيرايو “اڳتي / پوئتي” اڳتي وڌڻ لاءِ, the receiver’s large motor will turn on, and the display will show forward

ڦيرايو “اڳتي / پوئتي” تبديل ڪريو واپس ڏانھن, the large motor of the receiver will turn on in reverse, and the display will show reverse

گھمايو “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;

3.Small motor and speed regulation

Move the “اڳتي / پوئتي” اڳتي وڌڻ لاءِ, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward

ڦيرايو “اڳتي / ريورس” تبديل ڪريو واپس ڏانھن, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse

4.Turn left and right

ڦيرايو “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left

ڦيرايو “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right

5.Turn in place

دستي موڊ ۾:
Turn left in place: کي دٻايو ۽ رکو “Enable” button, ڦيرايو “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;

Turn right in place: کي دٻايو ۽ رکو “Enable” button, ڦيرايو “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;

6.Small motor speed limit adjustment

خودڪار موڊ ۾: press and hold the “Enable” بٽڻ دٻايو ۽ گھمايو “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;

7.خودڪار ڪٽڻ

The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;

8. Straight line correction

When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: دستي موڊ ۾, press and hold the “Enable” بٽڻ دٻايو ۽ گھمايو “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 to 90; correction voltage of one correction unit is about 0.02V;

9. Parameter menu (استعمال ڪندڙن کي منع ٿيل آھي ان کي تبديل ڪرڻ کان بغير اجازت جي)

Some functions of the remote control can be adjusted through parameters. دستي موڊ ۾, when the small motor speed S2 is 10, اڳتي / ريورس سوئچ کي قطار ۾ ٽي دفعا دٻايو, and then push it down three times in a row to enter the parameter menu;
پريميٽر مينيو مان نڪرڻ: choose to save or not save, then press the enable button to confirm the exit;
وڌ کان وڌ موجوده: the operating rated current of the cutting motor is 80% of this currentt;
رفتار ڪنٽرول پيراگراف: automatic cutting control parameters, ڊفالٽ 800, ترميم منع آهي;
فريب پيرا ميٽر: automatic cutting control parameter. جڏهن ڪٽڻ واري موجوده تبديلي جي قيمت هن قدر کان وڌي ٿي,deceleration begins.
ايڪليشن اي 1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
فريب A2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
وڌ ۾ وڌ هلڻ: the maximum speed of the small motor.
موجوده ڪٽڻ: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
ڊفالٽ رفتار جي حد: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
رفتار جي حد آفسيٽ: the maximum speed of the small motor during automatic cutting.
وڌ کان وڌ ھائو: maximum speed of large motor.

ريموٽ ڪنٽرول برقي خاصيتون

ريموٽ ڪنٽرول سائيز

هن پراڊڪٽ جي حتمي تشريح جو حق صرف اسان جي ڪمپني سان تعلق رکي ٿو.