5.Oloa Galuega Folasaga

② Enable buttons on both sides

③Button area

12 Pulu

④ Axis Selection and Magnification Switch

One 9-gear axis selection switch; one 3-gear magnification switch.

⑤ Emergency Stop Switch

Remote control emergency stop switch.

⑥ Display Screen Area

It can display coordinates, status and other information.

⑦ Electronic Pulse Encoder

One electronic pulse encoder with 100 pulses per revolution.

⑧ Type-C Charging Port

It is used for connection between the charger and the remote control.

The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key

6. Product Accessories Diagram

7. Receiver and Wiring Ports

8. Configure network access

9. Test Instructions

1.Oloa Folasaga

E leai se mea e le mafai ona fesoʻotaʻi, tulaga, seti meafaigaluega ma
isi galuega o meafaigaluega masini CNC. O lenei oloa e aofia ai le uaealesi,
Aveesea le masani o le Pathy Spring Parque, Faʻaititia o mea leaga na mafua mai i le uaea,
fa'ate'aina le fa'aletonu o le toso uaea, pisia suauu, uat., ma e sili atu ona faigofie
galue. O loʻo faʻaaogaina lautele i meafaigaluega masini CNC e pei o gantri machining centers, gantri
lathe tu'u sa'o, CNC masini gaosi masini, ma e mafai ona fetuutuunai i se ituaiga o CNC
faiga i luga o le maketi, pei o tagata valea, Mitsubishi, Fanac, syntec ma isi faiga CNC
brands.

2.Oloa Vaega

1. Adoptt 433mhz Wireless Pupuni Tekonolosi, E leai se aoga 80 mita;
2. Ia e talia le aoga masani, faʻaaoga 32 seti o mea e pulea mamao uaealesi i le
taimi e tasi e aunoa ma le aafia ai o le tasi i le isi;
3. Lagolago a le Student Seti faamau, ma ina ua uma ona tape le uili lima, le taofi fa'afuase'i
o lo'o aoga pea le fa'amau;
4. Lagolago 6 Tuutuuga Feagaiga, Sui i le io faailoilo;
5. Lagolago 6-Axis pulea, 7-12 Axis pulea mafai ona masani;
6. Lagolagoina 1x,10X, 100X pule ma mafai ona sili atu le maualuga o le 1000x;
7. Lagolagoina le fa'aogaina o le fa'aogaina o le ki, ki o le gaosiga l0 sianals. axis filifiliga,fa'aletagata
ma encoder.;
8. Lagolago filifiliga axis ma faalautele filifiliga encoder output;
9. Lagolago tulaga masani Type-C totogi, 5V-2A faʻamatalaga faʻatonuga, faʻamatalaga faʻapipiʻiina maa
14500/1100mAh.

3.Oloa Faapitoa

4.Oloa Galuega Folasaga

Faamatalaga：
①emanked stre button：
Pe a ootia le ki faʻafuaseʻi, o fa'alavelave fa'afuase'i e lua taofi galuega IO i luga
ua motusia le tali, ma o galuega uma a uili lima e le aoga. A o'o ina fa'alavelave
ua tatala le taofi, O le faalavelave faʻafuaseʻi na taofi le iO o loʻo tapunia, ma uili lima uma
ua toe fa'aleleia galuega; ma ina ua uma ona tape le uili lima, le fa'alavelave fa'afuase'i taofi IO gaosiga
of the receiver is still valid when the emergency stop button is pressed.

②Enable button:
Oomi so'o se tasi o fa'aagaaga fa'amau i itu uma e lua, ma vaega e lua o le mafai IO
o le a kilia mea e maua i luga o le tali. Tu'u mai le fa'aagaaga fa'amau ma le mafai IO
o le a tape galuega faatino. I le male, e tatau ona e oomi ma uu le faamau mafai muamua
fesuia'i le fua faatatau filifiliga axis ma lulu le uili lima. O lenei galuega e mafai
canceled through the configuration software.
③Axis filifili ki (Malosiaga ki):
Oomi ma uu le faamau e mafai ai ma sui le ki e filifili ai le axis e sui ai le
axis gaioi pulea e le uili lima. Su'e le ki lea mai le OFF i so'o se axis ma
turn on the handwheel power.

④Pulse encoder:
Fetaomi ma taofi le faʻamau ki ma lulu le pue o loʻo aofia ai e lafo mai le palu
signal to control the movement of the machine axis.

⑤Fa'ailoga maa:
Le fa'aaliga malosi o uili lima, malamalama uma o lona uiga o le malosi atoatoa, o ese uma o lona uiga e leai
ki pe leai se mana, emo le laina agavale muamua, e ta'u mai ai ua maualalo tele le malosi,
please charge in time.
⑥Mili Fa'ailoga:
Afai e ola le moli faailo, o lona uiga o lo'o fa'agaioi le uili lima ma o lo'o fa'ailo
masani; pe a pe le moli faailo, o lona uiga e leai se taotoga, pe o loo faagaoioia ae
the wireless signal is not connected.

5.Oloa oloa

6.Oloa faapipiiina taiala

6.1 Oloa Faʻapipiʻi Laʻasaga
1. Fa'apipi'i le tali i totonu o le kapoti eletise e fa'aaoga ai kilipa i tua, pe fa'apipi'i i totonu
the electrical cabinet using the screw holes at the four corners of the receiver.
2.Faasino i le matou tagata e mauaina le, Faatusatusa i lau galuega i luga ole nofoaga, ma fesootai
the equipment to the receiver via cables.
3.Ina ua uma le taliaina, O le antena na lagolagoina ma le tagata e talia tatau ona fesoʻotaʻi,
Ma o le pito i fafo o le vetena e tatau ona faʻapipiʻiina pe tuʻuina i fafo atu o le eletise eletise. O
ua fautuaina e tuu i luga o le pito i luga o le kapoti eletise mo le aafiaga faailo sili. O lena
fa'asa ona tu'u le antenna e le feso'ota'i pe tu'u le antenna i totonu o le kapoti eletise,
which may cause the signal to be unusable.
4. Mulimuli ane, Liliu i luga o le Houndwel Part Flart ma e mafai ona e faʻagaioia le masini e
handwheel remote control.

6.2 E maua le faʻapipiʻiina o faʻamatalaga

6.3 Mauaina o le apaau o le ata tusi

7.Mea gaosiga o mea
1. Ua ola le masini, ua ola le tali, le fa'ailoga o lo'o galue
emo moli, o le uili lima fa'aeletonika uaealesi ua fa'apipi'i le ma'a, le ufiufi maa
ua faamau, ua ki ai le ki uaealesi eletise lima uili, ma le
o lo'o ola moli uili lima;
2. Filifili le faamaopoopo Axis: Fetaomi ma taofi le faamau faamau, sui le filifiliga axis
ki, ma filifili le axis e te manaʻo e galue ai;
3. Filifili Faalauteleina: Fetaomi ma taofi le faamau faamau, sui le ki fa'alautele,
ma filifili le tulaga fa'alautele e te mana'omia;
4. Agai Axis: Fetaomi ma taofi le faamau faamau, Filifili le Axis Filifiliga ki, filifili
le ki fa'atele, ona fa'ata'amilo lea o le pulusi encoder e fa'asolo ai le axis lelei
fa'asaga i le uati ma le fa'agaoioi le lelei fa'afeagai;
5. Fetaomi ma taofi soʻo se mea e faʻamau ai, ma le fa'amau fa'atatau IO galuega a le
o le a kilia le tali. Tu'u le ki e tape ai le galuega;
6. Fetaomi le Student Stud button, le fa'alavelave fa'afuase'i taofi IO gaosiga o le
ua motusia le tali, ua le atoatoa le galuega o le uili lima, tatala le taofi fa'afuase'i
faamau, ua tapunia le fa'alavelave fa'afuase'i, ma ua toe fa'afo'isia le galuega a le uili lima;
7. Afai o le Hundwel e le faʻagaioia mo se taimi o le taimi, e otometi lava ona ulufale i le moe
auala e faʻaitiitia ai le faʻaogaina o le eletise. O afea e toe faaaoga ai, o le uili lima e mafai
fa'aagaoioia e ala i le oomiina o le fa'aagaioia ki;
8. Afai o le Hundweel e le faaaogaina mo se taimi umi,e fautuaina e sui le uili lima
o'o i le tulaga OFF, Tapē le tamaloa aseta, and extend the battery life.

8.Oloa faʻataʻitaʻiga faʻamatalaga

① ：O le DWGP o lo'o fa'atusalia le sitaili foliga

② ：Ua e pue o mea taua:
01: O lo'o fa'ailoa mai ai o fa'ailoga o le pulupulu o fa'ailoga o le A ma le B, ma o le pulupulu voltage e 5V; Pusa
aofaiga 100PPR;
02: O lo'o fa'ailoa mai ai o fa'ailoga o le pulupulu o fa'ailoga o le A ma le B, ma o le pulupulu voltage e 12V; Pusa
aofa'i 25PPR;
03: O lo'o fa'ailoa mai ai o le fa'ailoga o le pulupulu o le gaosiga o le A B、a-、B-； Tulei voltage 5v; Pulse quantity 1
00PPR;
04: Faʻailoa mai se maualalo-tulaga npn tatala le matagaluega galuega, ma le pulse Upt Upper o le A ma B; le
numera o pulus e 100PPR;05: Faʻaalia le maualuga-maualuga pnp faʻamatalaga, fa'ailoga fa'atupu pulusua
o A ma B; aofa'i o pulus e 100PPR;
③ : O le sui o le numera o le axis filifiliga switches, 6 sui 6 axis, 7 sui 7 axis.
④ : o lo'o fa'atusalia le ituaiga o fa'ailoga sui filifilia o axis, O se faʻatusatusaga o le taimi o le faʻailoga,
B o lo'o fa'atusalia fa'ailoga fa'ailoga fa'ailoga;

⑤ : o lo'o fa'atusalia le ituaiga fa'alilolilo ki sui,
O se faʻatusatusaga o le taimi o le faʻailoga, B o lo'o fa'atusalia fa'ailoga fa'ailoga fa'ailoga;
⑥ : o lo'o fa'atusalia le aofa'i o fa'amau fa'apitoa, 6 sui 6 Tuutuuga Feagaiga;
⑦ : o lo'o fa'atusalia ai le paoa mo le uili lima o le system, 05 sui o le 5V paoa sapalai,
ma le 24 represents 24V power supply.

9.Fa'afitauli Fa'afitauli

10. Tausiga ma le tausiga

1. Faʻamolemole faʻaaoga i se eleele mago i le potu vevela ma le mamafa e faʻalautele ai lona olaga tautua;
2. Faʻamolemole aloese mai le faʻaogaina i siosiomaga le masani ai pei o timuga ma vai paʻu e faʻalautele ai le olaga tautua;
3. Faʻamolemole Faʻatupuina foliga o le Faʻatonuga Mamafa e faʻalautele lona olaga tautua;
4. Faʻamolemole aloese mai le faʻamamaina, pauu, palu, etc. e puipuia ai le faaleagaina o vaega sao i totonu
le uili lima po o le sa'o mea sese;
5. A le faaaogaina mo se taimi umi, Faʻamolemole teu le lima o le lima i se mea mama ma saogalemu;
6.I le taimi o le teuina ma felauaiga, attention should be paid to moisture and shock resistance.

11.Faamatalaga saogalemu

1. Faʻamolemole faitau ma le faʻaeteete i lalo ae le i faʻaaogaina ma faʻasaina le tagata polofesa mai le faʻagaioiga;
2. Pe a maualalo le maualuga o le maa, faamolemole totogi i le taimi e aloese ai mai mea sese e mafua mai le le lava
maa ma le le mafai ona faagaoioi le uili lima;

3. Afai o le toe faaleleia e manaomia, Faʻamolemole faʻafesoʻotaʻi le gaosi oloa. Afai o le leaga e mafua mai i le toe faaleleia, the manufacturer will not provide warranty.

1.Oloa Folasaga

O le faʻaogaina o le CNC faʻatautaia mamao PHB06B e talafeagai mo le uaea
fa'atonuga mamao o faiga CNC eseese. E lagolagoina tagata fa'aoga e
customize polokalame ma atiina ae ki galuega tauave e iloa mamao
pulea o galuega tauave eseese i le faiga CNC; e lagolagoina tagata fa'aoga e
fa'avasega polokalame ma atia'e fa'aaliga mea e iloa ai le malosi
fa'aalia le tulaga o le faiga; o le pule mamao e sau ma se toe faʻaaogaina
battery and supports Type-C interface charging.

2.Oloa Vaega

1. Fa'aaogaina 433MHZ feso'ota'iga fa'atekonolosi uaealesi, le faagaoioiga uaealesi
mamao e 80 mita;
2. Fa'aaogāina otometi fa'aoso fa'asolo galuega, 32 seti o le mamao uaealesi
e mafai ona fa'aoga i le taimi e tasi e aunoa ma le afaina o le tasi i le isi;
3. Lagolago 12 fa'apolokalame fa'amau fa'amau;
4. Lagolago 2.8-inisi mata, fa'aali polokalame fa'apitoa fa'apitoa;
5. Lagolago 1 6-kilia filifiliga axis saoasaoa, lea e mafai ona fa'apolokalame fa'apitoa;
6. Lagolago 1 7-ki fa'atele vave, lea e mafai ona fa'apolokalame fa'apitoa;
7. Lagolago 1 uili lima faaeletonika, 100 Pulu / liliu;
8. Lagolago tulaga masani Type-C totogi; 5V-2A faʻamatalaga faʻatonuga; maa
specification 18650/12580mWh battery.

3.Mataupu Manuia

4. Oloa Faapitoa

5.Oloa Galuega Folasaga

Faamatalaga：
①Sui eletise：
Pulea le uili lima e tatala ma tapuni

②Ave fa'amau i itu uma e lua：
E tatau ona oomi le faamau e mafai ai e vili ai le uili lima;

③ Fa'amau fa'amau vaega
12 fa'amau fa'amau i le 3X4, polokalame fa'auigaina e tagata fa'aoga;

④Axis filifiliga, ki fa'atele
1 6-tulaga axis filifili ki, lea e mafai ona fa'atulagaina ma fa'apolokalameina;
1 7-fesuiai fua faatatau tulaga, lea e mafai ona fa'atulagaina ma fa'apolokalameina

⑤ Kisi taofi fa'afuase'i:
Su'e fa'alavelave fa'afuase'i lima lima;

⑥Fa'aaliga nofoaga:
E mafai ona faʻaalia le mana o iai nei, faailoilo, ma fa'asinomaga fa'aaliga anotusi;

⑦Electronic uili lima：
1 uili lima faaeletonika, 100 pulses/turn.

⑧Talaga uafu:

Ua fausia i totonu maa toe fa'aaogaina, molia i le fa'aaogaina o le Type-C charger, fa'atonuga voltage 5V,
1A-2A nei; taimi e molia ai 7 itula;

6.Oloa oloa

7.Oloa faapipiiina taiala

1. Faaofi le USB receiver i totonu o le komepiuta, e otometi lava le komepiuta
iloa ma faʻapipiʻi le avetaavale masini USB e aunoa ma le faʻapipiʻiina o tusi lesona;
2. Fa'aofi le fa'atonu mamao i totonu o le uta. A uma ona fa'atumu atoa le maa, liliu
i luga o le ki o le eletise, liliu i le auala mamao, ma o le faʻaaliga e faʻaalia masani, lea
o lona uiga ua manuia le power-on;
3. A mae'a ona ola, e mafai ona e faia soo se faagaioiga faamau. E mafai ona pulea mamao
lagolago fa'agaioiga fa'amau lua i le taimi e tasi. A e oomi soo se faamau, se uliuli
sikuea o le a faʻaalia i tafatafa o le faailo i luga o le mamao, e faailoa mai ai o le faamau
is valid.

8.Mea gaosiga o mea
A'o le'i atina'e ma fa'aoga oloa, e mafai ona e faʻaogaina le polokalama Demo matou te tuʻuina atu e suʻe ai
o fa'amau ma fa'aaliga o le fa'atonu mamao, po'o le fa'aoga o le Fa'aaliga e fai ma fa'amatalaga masani mo
atinae polokalame i le lumanai;
A'o le'i fa'aogaina le polokalama fa'apitoa, fa'amolemole fa'apipi'i le USB receiver i le komepiuta, faia
mautinoa e lava le mana o le pule mamao, Liliu le mana eletise, ona faaaoga lea;
Pe a oomi so o se faamau i luga o le pulea mamao, o le a faʻaalia e le polokalama suʻega Demo le
taua autu tutusa. Ina ua uma ona tatalaina, ua mou atu le fa'aaliga taua taua, e faailoa mai ai
the button upload is normal.

9.Fa'afitauli Fa'afitauli

10. Tausiga ma le tausiga

1. Fa'amolemole fa'aaoga i totonu o se si'osi'omaga mago ma le vevela masani ma le mamafa e fa'alautele
Le Olaga Tautua;
2. Aua le fa'aogaina mea ma'ai e pa'i i le vaega autu e fa'alautele ai le ola tautua o le ki;
3. Fa'amolemole fa'amama le vaega autu e fa'aitiitia ai le ofuina o ki;
4. Aloese mai le oomi ma pa'ū e faʻaleagaina ai le masini mamao;
5. A le faaaogaina mo se taimi umi, fa'amolemole aveese le maa ma teu le fa'atonu mamao ma
maa i se nofoaga mama ma saogalemu;
6. Pay attention to moisture-proof during storage and transportation.

11.Faamatalaga saogalemu

1. Faʻamolemole faitau ma le faaeteete le faʻaeteete aʻo le i faʻaaogaina. E fa'asa tagata e le o ni tomai fa'apitoa
from operating.
2. Fa'amolemole fa'aaoga le uta muamua po'o se uta na gaosia e se fale gaosi masani ma
the same specifications.
3. Fa'amolemole tu'u i le taimi e 'alofia ai le fa'agaioiga sese ona o le le lava o le malosi e mafua ai
the remote control to be unresponsive.
4. Afai o le toe faaleleia e manaomia, Faʻamolemole faʻafesoʻotaʻi le gaosi oloa. Afai o le faaleagaina e mafua mai i
toe faaleleia e le tagata lava ia, the manufacturer will not provide warranty.

1.Oloa Folasaga

O le fa'atonuga mamao ole CNC PHB10 e talafeagai mo le uaea
fa'atonuga mamao o faiga CNC eseese. E lagolagoina le faʻamalamalamaina e le tagata faʻaoga
polokalame e atia'e ai galuega fa'amau, ma iloa le pulea mamao o eseese
galuega i luga ole faiga CNC; e lagolagoina le fa'aogaina o polokalame e fa'atupuina
moli LED e moli ma tape, ma iloa le faʻaalia malosi o le tulaga o le faiga;
o le pule mamao e sau ma se maa toe faʻaaogaina ma lagolagoina le Type-C
interface charging.

2.Oloa Vaega

1. Fa'aaogaina 433MHZ feso'ota'iga fa'atekonolosi uaealesi, le faagaoioiga uaealesi
mamao e 80 mita;
2.Fa'aaogāina otometi fa'aoso fa'asolo galuega, 32 seti o le mamao uaealesi
e mafai ona fa'aoga i le taimi e tasi e aunoa ma le afaina o le tasi i le isi;
3.Lagolago 32 fa'apolokalame fa'amau fa'amau;
4.Lagolago 9 polokalame fa'aaliga moli fa'ale-aganu'u;
5.Lagolago IP67 tulaga susu;
6.Lagolago tulaga masani Type-C le faʻaogaina o fesoʻotaʻiga; 5V-2A faʻamatalaga faʻatonuga;
1100 mAh tele gafatia maa, fa'atasi ai ma galuega fa'atali moe otometi; iloa
ultra-umi maualalo le malosi standby;
7.Support real-time display of power.

3.Mataupu Manuia

4. Oloa Faapitoa

5.Oloa Galuega Folasaga

Faamatalaga：
①Fa'aaliga tulaga ma'a：
E moli pe a uma le eletise, tape pe a uma le paoa;
Afai o le moli faailoilo o le maa e na o le tasi le pa ma o loʻo emo pea, o lona uiga o le
ua maualalo tele le maa. Faamolemole sui le maa;

Afai o lo'o ola uma moli fa'ailoga o le maa ae emo i tua isi moli LED ma
i luma, o lona uiga e matua maualalo le maa. Faamolemole sui le maa;
Afai e le mu pe alu ese le faailo o le maa, ma le masini e le mafai
amata i le oomi ma uu le faamau o le mana, Faʻamolemole sui le maʻa;

②Fa'amau fa'amau：32 fa'amau fa'amau i le 4X8, polokalame fa'auigaina e tagata fa'aoga;

③Tulaga LED：
COMMU: Malamalama fa'ailoga ki, e moli pe a oomi le faamau ma alu
i fafo pe a tatala le faamau; o isi moli o fa'aaliga masani;

④Sui eletise：
Oomi umi mo 3 sekone e ki ai, lolomi umi mo 3 sekone e tape ai;
⑤Talaga uafu：
Fa'aaoga le uta Type-C e totogi ai, fa'atonuga voltage 5V, 1A-2A nei; molia
taimi 3-5 itula;

Pe a molia, emo le faailo o le eletise, o lo'o fa'ailoa mai o lo'o totogi. O afea
fa'atumu atoa, the power indicator will show full bar without flashing.

6.Oloa oloa

7.Oloa faapipiiina taiala

1 . Ou te faʻapipiʻi le USB receiver i totonu o le komepiuta, e otometi lava le komepiuta
iloa ma faapipii le avetaavale masini USB e aunoa ma le tusi lesona
2. Fa'aofi le fa'atonu mamao i totonu o le uta. A uma ona fa'atumu atoa le maa, lolomi
ma uu le faamau mana mo 3 sekone. O le a fa'aola le pule mamao ma le mana
o le a moli le faailo, indicating that the power-on is successful.
3. A mae'a ona ola, e mafai ona e faia soo se faagaioiga faamau. Le pule mamao
e mafai ona lagolagoina fa'agaioiga fa'amau lua i le taimi e tasi. A e oomi soo se faamau, le
O le a moli le moli COMMU i luga o le pule mamao, indicating that this button is valid.

8.Mea gaosiga o mea
A'o le'i atina'e ma fa'aoga oloa, e mafai ona e faʻaogaina le polokalama faʻataʻitaʻiga matou te tuʻuina atu i ai
fa'ata'ita'i fa'amau i luga o le ta'avale mamao ma le moli LED i luga o le ta'avale mamao. E te mafaia
also use the demo as a reference routine for future programming development.
A'o le'i fa'aogaina le polokalama fa'apitoa, fa'amolemole fa'apipi'i le USB receiver i le komepiuta,
ia mautinoa ua lava le mana o le masini mamao, fetaomi ma uu le faamau o le mana i le t
urna i luga, ona faaaoga lea;
Pe a oomi so o se faamau i luga o le pulea mamao, o le a faʻaalia le faʻataʻitaʻiga polokalama suʻega
o le tau autu tutusa. Ina ua uma ona tatalaina, ua mou atu le fa'aaliga taua taua,
e fa'ailoa mai ai o le fa'apipi'i ki e masani lava;
E mafai foi ona e filifilia le numera moli LED i luga o le su'ega polokalama faakomepiuta demo, kiliki download,
ma o le numera moli tutusa i luga o le pule mamao o le a moli, e faailoa mai ai o le
LED light is downloading normally.

9.Fa'afitauli Fa'afitauli

10. Tausiga ma le tausiga

1. Fa'amolemole fa'aaoga i totonu o se si'osi'omaga mago ma le vevela masani ma le mamafa e fa'alautele
Le Olaga Tautua;
2. Aua le fa'aogaina mea ma'ai e pa'i i le vaega autu e fa'alautele ai le ola tautua o le ki;
3. Fa'amolemole fa'amama le vaega autu e fa'aitiitia ai le ofuina o ki;
4. Aloese mai le oomi ma pa'ū e faʻaleagaina ai le masini mamao;
5. A le faaaogaina mo se taimi umi, fa'amolemole aveese le maa ma teu le fa'atonu mamao
ma le maa i se nofoaga mama ma saogalemu;
6. Pay attention to moisture-proof during storage and transportation.

11.Faamatalaga saogalemu

1. Faʻamolemole faitau ma le faaeteete le faʻaeteete aʻo le i faʻaaogaina. E le-polofesa e faasaina mai
operating.
2. Fa'amolemole fa'aaoga le uta muamua po'o se uta na gaosia e se tagata gaosi masani ma le
same specifications.
3. Fa'amolemole totogi i le taimi e aloese ai mai le le sa'o le fa'agaioiga ona o le le lava o le malosi e mafua ai le
remote control to be unresponsive.
4. Afai o le toe faaleleia e manaomia, Faʻamolemole faʻafesoʻotaʻi le gaosi oloa. Afai o le leaga e mafua mai i le toe faaleleia o le tagata lava ia,
the manufacturer will not provide warranty.