O le pito mamao o le otometi tipiina o le ala taʻavale taʻavale na vaʻaia e talafeagai mo le ala ituaiga o loʻo vaaia
tipi masini. E faaaogaina le 485 Modbus RTU Protocol e pulea le agavale agavale ma le taumatau masani
tagata liliu mai, faʻapea foi ma le tele o le afi afi o le tele o le suiga o le saoasaoa o le amataga o le amataga ma le pito i luma, i tua,
agavale agavale ma le itu taumatau pule. Ma e mafai ona faitau le galue i le taimi nei o le tele o afi afi
tagata liliu mai i le 485 Modbus RTU Protocol. E ala i le auiliiliga ma le faʻatusatusaina o le taimi nei o le
Tele afi, O le saoasaoa o le agavale ma taumatau auala e mafai ona otometi fetuunai i le taimi moni i
achieve automatic cutting function.

2. Oloa aoga

1. Vaetamaina 433mhz uaealesi fesoʻotaʻiga tekonolosi, ma le uaealesi o le aoga o le mamao o 100 meters.
2. Ia e talia le otometi le aoga 32 seti o le uaeale e sili onaeale
taimi uma, without affecting each other.
3. Lagolagoina uma taimi liliu mai 485 Modbus RTU Protocol, Ma o le taimi nei masani
E aofia ai le Brander Brander:Shanghai xielin, Fuji, Huichuan, Zhongsechen, Inō, ma le . Mo ituaiga
e le talafeagai, please contact us for customization.
4. Lagolago le saoasaoa tulafono faatonutonu, amata, and current reading of large motor frequency converters.
5. Lagolago le agavale agavale ma le taumatau masani masani liua saoasaoa tulafono faatonutonu, amata, luma, i tua, left and right control.
6. Lagolago le laina o le laina o le agavale ma le taumatau masani masani liua e taofi ai le masini savali i a
straight line.
7. Lagolago otometi le tipiina o le rope na vaaia, otometi lava fetuunai le itu tauagavale ma taumatau le saoasaoa i totonu
real time according to the current information of the large motor.
8. O loʻo fetaui foi ma le tuʻusaʻo o loʻo i ai i le afi mo le afi afi ma taofi, ma le afuaina o le voltage galuega
control for motor speed.

3. Oloa Faapitoa

4. Oloa Galuega Folasaga

Faamatalaga:
①screen faʻaali:

②Mode ki:

③eble:
Tuufaatasi faamau, O nisi gaioiga e manaʻomia ai le taofia o le faʻamau faʻamau mo le faʻagaioiga,see the instructions for each switch for details.
④laged afi afi:
Faʻaaogaina se 3-saoasaoa toe setiina ki, Tosoina lenei ki e mafai ona pulea le luma ma le toe suia o le afi tele. Ina ua uma ona tatalaina, O le a tumau le setete, Ma o le a i ai ni fetu fetu i luga o le mata. O le S1 ↑ faʻailoa mai ai le litane, and the S1 ↓ arrow indicates everse rotation.
⑤small afi i luma / toe ki:
O le tamai afi afi o loʻo faʻaoʻo atu i le 3-saoasaoa o le tagata-lokaina ki i luma o le. Fetaomi le faʻamau faʻamau ma tosoina o lenei ki e mafai ona pulea le tamaʻi afi e agai i luma ma tua, ma o le a faʻaalia le faʻaali o le a aliali mai i le lau., and the ↓↓ arrow represents backward.
⑥ Laʻasaga saʻo:
Faʻaaogaina le tele tele o le faʻaliliu, Fetaomi le faamau faamau, liliu le ki, ma faʻaali le auala saʻo: O: O le agavale agavale e faateleina ai 1 iunite i le rotation, ma le agavale
afi saoasaoa faateleina 0.1 iunite; Afe i le agavale agavale, Tuʻuina sao saʻo: O: I le itu taumatau, O taimi uma o le knob faateleina e 1 iunite, ma le saoasaoa o le fou afi faateleina
e 0.1 unit.
⑦small afi afi ki ki:
Faʻaaogaina se 3-saoasaoa toe setiina ki, A o le malosi, O le tamai afi e mafai ona pulea e liliu i le agavale po o le taumatau. Na tatalaina, O le suiga o le nofoaga o le a otometi ona taofi lenei gaioiga. I luma o le setete, A liliu lenei ki, O le a aliali mai faʻaali o le a aliali mai i luga o le lau. O le ← ↑ faʻailoa faʻaalia le agavale agavale, Ma o le ↑ → o le afhar faʻailoa saʻo i le taimi nei, Liliu lenei ki ma le faʻaaliga o le a aliali mai i luga o le lau. O le ← ↓ atrow faʻailoa le agavale agavale, and the ↓→ arrow indicates right turn.
⑧ Tele le saoasaoa o le afi:
Faʻaaogaina le tele tele o le faʻaliliu, liu 1 grid i taimi uma, le saoasaoa tau o le tele o afi suiga i le tusa 0.2 iunite. Fast rotation can quickly modify the speed value of the large motor.
⑨ tamai afi saoasaoa tulafono faatonutonu:
Faʻaaogaina le tele tele o le faʻaliliu, I le tusi lesona, Fetaomi le faamau faamautinoa atu ona o le faliu lea i le tasi grid i le taimi，o le saoasaoa o le mea o le itu tauagavale ma mea laiti e mafai ona suia e tagata 0.1 iunite, ma vave faʻataʻamilosaga mafai vave suia le saoasaoa tau o le tamai afi .in otometi faiga, Fetaomi le faamau faamau ma liligi se tasi grid i le taimi,O le saoasaoa tapulaʻa tau f o le tamaʻi taʻavale afi e tusa ma le 0.1 iunite. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Taofia le puleaina o le mana eletise
The remote control display screen is turned on.

5. Oloa Aufaigaluega Ata

6. Oloa faapipiiina taiala
6.1 Oloa Faʻapipiʻi Laʻasaga
1. Faʻapipiʻi le tagata e mauaina i totonu o le eletise eletise e ala i le faʻapipiʻi i le pito i tua, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Faʻasino i la matou tagata e mauaina le faʻailoga o le ata ma faʻatusatusa i lau galuega i luga o le upega tafailagi. Connect the equipment to the receiver through wires.
3. Ina ua uma ona faia le tagata e faataapeina, E manaʻomia le faʻafesoʻotaʻi o le antenna faʻaaogaina ma le tagata e mauaina ma faʻapipiʻi pe tuʻu le pito i fafo o le antenna i fafo atu o le eletise eletise. E fautuaina le tuu i luga o le pito i luga o le eletise eletise mo le sili sili ona lauiloa. E faasa e tuua le antenna e le masani ai pe tuu i totonu o le eletise eletise, as it may cause the signal to be unusable.
4. Mulimuli ane, Faapipii le maa i luga o le auala mamao, Faapipii le maa, ma liliu i luga o le eletise eletise o le le mautonu. Ina ua maeʻa ona faʻatonutonu le faʻafeiloaʻiga
Galue interface, remote control operations can be performed.

6.2 E maua le faʻapipiʻiina o faʻamatalaga

6.3 Mauaina o le apaau o le ata tusi

7. Mea gaosiga o mea
7.1 Taofia le tulaga o tulaga tulaga
Metotia e ulufale ai i le mamao faʻatonutonuina o pakete backees:

Liliu le auala ki i le tusi lesona auala, fetuunai le saoasaoa o le tamai afi i 25 i itu uma e lua, pe 0, 10, 20, 40, 50 i itu uma, ma faʻaauau pea le liua o le taʻavale o le tele o afi 3 taimi ma lalo 3 taimi;
Faaaoga le “Laititi afi saoasaoa” Knob i le flip itulau, Fetaomi le faamau faamau, ona liliu lea o le tamaʻi taʻavale saoasaoa o le saoasaoa papupuni e suia ai tapulaʻa. Ina ua maeʻa le faʻaleleia, Liliu le itulau i le faaiuga,filifili “Sefe” E alu ese, ma fetaomi le mafai le ki e alu ese ai le lisi;
O le tapulaʻa o loʻo mulimuli mai:
Maualuga o taimi nei: Manatu masani o le tele o afi afi, Faatulaga le 15-200A, lē oʻo mai 100;
Saoasaoa pule: Otometi faiga, O le tele o afi afi o loʻo feaveaʻi vave le saoasaoa pe tuai,le televave le vave, seti 200-1500, lē oʻo mai 800;
Faasee faalemafaufau: Seti le pito i luga e mafai ai ona faʻatagaina le saoasaoa o le taʻavale. O le taimi nei o suiga o nei i tua atu o lenei taua, O le tautalaga o le a tupu. Le laititi, o le saoasaoa o le faʻaseseina o le itu tauagavale ma itu taumatau, ma le tele o 05-12 ma le faaletonu o 06;
Saoasaoa a1: Le tele o le afi saoasaoa, le saoasaoa faateleina, ma le tele o 00-06 ma le faaletonu o 01;
Faasee a2: Le tele o le afi saoasaoa, O le saoasaoa e faʻaititia, ma le tele o 00-06 ma le faaletonu o 02;
Faʻamalosia le saoasaoa tulafono faʻatonutonu: E manaʻomia e le tamaʻi le auala saoasaoa o le afi? 00 e le mafai, 01 mafai, Leaga o 01;
Amata le tagata lava ia: E otometi ona tausia e le afi tele le pule a le tagata lava ia? 00 e le uuina, 01 umia, default 01
Sili atu le savali: Maualuga saoasaoa o agavale agavale ma taumatau, atu 10-100, lē oʻo mai 50;
Tipi nei: maualuga le tipiina o le taimi nei, faaalia i luga o le lau o le IC taua, atu 15-160, default 30,
fetaui ma le IC: 30 faaalia i luga o le mata. O le pito i luga o lenei parameter o 80% o le maualuga o le taimi nei;
Tapulaa le saoasaoa tapulaa: O le le aoga o le afi o le afi otometi o le saoasaoa pe a ki le i totonu o le laina o 0-100, ma le le atoatoa o 10. O le ata o loʻo faʻaalia F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Otometi faiga: Seti i 00, O le otometi / tusi lesona ki o se auala ki. Seti i 01, O le otometi / tusi lesona sui seti i le otometi tulaga, O le faʻaaliga foliga faʻaalia le malamalama, Ma o le otometi tiepili galuega i luga o le tagata e talia ua tapunia. A seti i le tusi lesona, O le otometi o loʻo otometi ona faʻamutaina;
Saoasaoa tapulaa: Le pito i luga o le otometi tipi saoasaoa o le tamai afi afi mai 00 i 200, ma le le atoatoa o 60 ma le talafeagai o ata 6.0 I luga o le mata; Pito i luga o le faʻaalia faʻatauaina = saoasaoa tapulaʻa ese x 0.1;
Sili Atu Maualuga: maualuga saoasaoa o le tele o afi, atu 10-100, lē oʻo mai 50;
MBUS meafaigaluega (faamalosia): Filifiliga o le tele o afi afi masani liua faʻataʻitaʻiga, atu 00-03, lē oʻo mai 03;
00- Shanghai xiulin 01-Fuji
02-Intet 03-intovice (zhongchen, Robicon)
Sbus meafaigaluega (faamalosia): Tamai afi afi masani liua faʻataʻitaʻiga filifiliga, atu 00-05, lē oʻo mai 03;

00- Shanghai xiulin 01-Fuji
02-Intet 03-intovice (zhongchen, Robicon)

04-Achuanda 05-leai

7.2 Parameter Faʻatulagaina o Taimi Faʻaliliu Suiga
1. Poloaiga Punaoa Filifiliga: Fesootaiga Coact Channel
2. Masani tele le filifilia o le filifiliga: Fesootaiga na tuuina atu
3. Fua faatatau: 19200
4. Faamatalaga o faamatalaga: Leai se faamaoniga, Faamatalaga o faamatalaga<8-N-1>
5. Togafitiga i le lotoifale: Seti le itu tauagavale liliu i le 1, o le aia tatau i tagata liliu i le 2, ma le
the large motor frequency converter to 3
7.3 O le saoasaoa o le faiga o le gaioiga
1. Malosiaga i luga o le masini, liliu i le auala mamao, Ulu atu i le suiga mamao backend, Seti le
Fofoga o Parction Backend Parameters, tele le faʻatulagaina o le tamaʻi afi ma le tele o afi afi
Transaer Movisi: (Skip O lenei laasaga pe a fai o le masini gaosi oloa ua uma ona setiina);
2. Seti le tapulaa o le taimi liliu mai (Skip O lenei laasaga pe a fai o le masini gaosi oloa
ua uma ona setiina);
3. Seti le auala mamao i le tusi lesona, ona faʻaaoga lea o le nofoaga mamao e faʻagaioi ai le masini
le tulaga faigaluega;
4. I le tusi lesona, Faatulaga le tipiina o le taimi nei o le tele afi i le IC ma le saoasaoa o le tele o afi
5. Alu i le otometi faiga ma seti le saoasaoa saoasaoa tapulaa f aoga mo le tamai afi;
6. I le otometi faiga, liliu le tele uila afi i luma e amata ai le tele o afi, Ona liliu lea
le tamai afi afi i luma pe toe sui, Ma o le nofoaga mamao e ulufale ai i luga o le tipiina
mode to start cutting.

8.Oloa faʻafitauli

9.Tausiga
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. A le faaaogaina mo se taimi umi, Faʻamolemole aveese le maa ma teu le siʻosiʻomaga mamao ma le maa i le mama
and safe place.
6.I le taimi o le teuina ma felauaiga, attention should be paid to moisture and shock resistance.

10. Faamatalaga saogalemu
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Faʻamolemole sui le maa i se taimi vave pe a oʻo le maa e aloese ai mai mea sese e mafua mai
Le lava le malosi, which may result in the remote control being unable to operate.
3. Afai o le toe faaleleia e manaomia, Faʻamolemole faʻafesoʻotaʻi le gaosi oloa. Afai o le leaga e mafua mai i le toe faaleleia, o le gaosi oloa
will not provide warranty.

Faʻataʻitaʻiga: DH01R-4W-26K

Masini talafeagai:various industrial equipment

2.Oloa oloa

Tusi: E mafai ona e filifilia se tasi o le tolu antennas. The suction cup antenna is standard by default.

3.Product model description

Tusi:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.

②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, ma le tele o 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.

④Analog input, ranging from 1 i 2, indicating that there are 1 i 2 Analolog Infouts(maximum 2 auala); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, uat.) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Foliga

1）Maximum 26 Oloa Galuega;
2）Maximum 4 auala o Analog 0-10V WHUPT (Faaali atu le tele o mea): lagolago 2 Channels o le faʻalautele o le faʻauiga o le puʻeina;
3）2 analog inputs; ma faaali atu i le tulaga mamao, O le faʻaaliga e mafai ona faʻapipiʻiina
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 Aa aa, low power consumption design;
6） Wireless operation distance is 200 mita;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.

5.O le Repram Reply Tralin Faamatalaga

6.Display content introduction

W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)

Maualalo voltage: O le mea e sili ona maualalo ai le paʻu, please replace the battery.

Taavale na pauu: O le uaealesi e le mafai ona motusia. Faʻamolemole siaki le malosi o le tagata e suʻe, mana e toe i ai, and restart the remote control.

7.Fofoga o le Repree Production Action Prociction faatonuga

1） Turn on the remote control
A o le tagata e mauaina, the receiver working indicator flashes; Faapipiiina le lua mea aa i le auala mamao, Liliu le mana eletise, and the display shows a value,Faasino le manuia amata. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
When the emergency stop button is pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Alu i fafo le tapulaa menu: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 i 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 i 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 i 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 to 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;

8.O LE FOLIGA O LE TOE TULAGA OLINGINGING

9.Tatala le saoasaoa

The final interpretation right of this product belongs only to our company.

Faʻataʻitaʻiga: Dh12s-p6s

Masini talafeagai:Ua maua le uaea / blade masini

2.Oloa oloa

Tusi: E mafai ona e filifilia se tasi o le tolu antennas. The suction cup antenna is standard by default.

3.O le Repram Reply Tralin Faamatalaga

4.FAʻAALIGA FAʻAFITAULI

Tauva Sili Mota: Autu: 0-50
Malaga taavale saoasaoa: Laina: 0-50
Maualuga saoasaoa tapulaa o otometi tipiina femalagaaiga afi: Saosaoa: 0-30
(Paramests fetuunai)
Otometi tipiina o le afi afi afi: Faatuina: 28 (Paramests fetuunai)
Swing lima uila saoasaoa saoasaoa: Taupega: 0-50

Maualalo voltage: O le mea e sili ona maualalo ai le paʻu, please replace the battery.

Taavale na pauu: O le uaealesi e le mafai ona motusia. Faʻamolemole siaki le malosi o le tagata e suʻe, mana e toe i ai, and restart the remote control.

5.Fofoga o le Repree Production Action Prociction faatonuga

1) Liliu i luga o le tulaga mamao

A o le tagata e mauaina, O le D2 mana malamalama i luga o le tagata e mauaina e masani lava, ma le d1 faailoilo malamalama amata amata; Faapipiiina le lua mea aa i le auala mamao, Liliu le mana eletise, Ma o le faʻaali o le a faʻaalia ai le saoasaoa o le afi, indicating successful startup.

2) O le tele o le afi ma le saoasaoa o tulafono / autu afi afi ma saoasaoa tulafono faatonutonu

Fetaomi ma taofi “Saoasaoa tulafono faatonutonu mafai”, liliu le “Luma / Suiga” Alu i luma, Ma o le afi autu o le a ki ai;
Fetaomi ma taofi “Saoasaoa tulafono faatonutonu mafai”, liliu le “Luma / Suiga” Suia i le fesuiaiga, ma le afi autu o le a toe suia ma liliu;Na ona faʻasolo le ki i le ogatotonu poʻo le faʻaaliga, Ma o le afi autu o le a taofi vave e aunoa ma le oomiina o le saoasaoa pule mafai faamau;Liliuina le “afi tele” Knob e fetuunai le saoasaoa tulafono faatonutonu voltage o le tagata ulufale mai le tele o le afi afi i le 0-10v;

3) Malaga afi

Fetaomi ma taofi “Fetuunaiga saoasaoa mafai”, liliu le “Luma / Suiga” Alu i luma pe tua, ma le savali o le a agai i le saoasaoa tele o 50;

4) Swing lima afi afi ma le saoasaoa tulafono faatonutonu

Liliu le “Swing Lima / Suiga” Suia i le swang lima po o le solomuli, Ma o le Shost's Swing Sthud Heam afi amata; Ona liua lea o le “Fetuunaiga saoasaoa” Knob e fetuunai le Swing Seam Morup Speed;

Fetaomi ma taofi “Fetuunaiga saoasaoa mafai”, ona toso lea o le “Swing Lima / Suiga” ki, O le afi o le lima o le afi o le a agai i le saoasaoa tele o 50;

5) Femalagaaiga afi saoasaoa tapulaa fetuunaiga

Fetaomi ma taofi le “Fetuunaiga saoasaoa mafai” faamau ma liligi le “Fetuunaiga saoasaoa” Ina ia fetuunai le maualuga saoasaoa tapulaa o le faimalaga afi i le taimi otometi tipi;

6) Otometi le tipiina

O le sitepu muamua o le amataina o le afi afi; O le laasaga lona lua o le fetuunai le maualuga saoasaoa saoasaoa o le savali afi; O le laasaga lona tolu o le gaoioi o le “Luma / Suiga” Sui i luma poʻo tua e ulufale i le otometi;

7) Tapulaa lisi lisi (Tagata faʻaaoga e faʻasaina mai le suia i totonu e aunoa ma se faʻatagaina)

Ulu atu i le tapulaa menu:I le tusi lesona, A o le tele o le afi afi 0, Toso le luma / toe suia le ki i le tolu taimi i le laina, ona tuleia lea o le tolu i le laina i le laina e teritore;
Alu i fafo le tapulaa menu: Liliu le saoasaoa fetuunaiga Knob, Filifili Sefe Pe Le Faasaoina, ma fetaomi le mafai faamau e faamaonia;
Rating nei: Le maualuga tau o le autu afi afi, Vaega o le Abpere;
Saoasaoa fetuunaiga tapulaa: Otometi Clooting Pulea Paramesters, lē oʻo mai 800, iunite milli sekone,E faasa;
Faasee faalemafaufau: O le taimi o le tipiina o le suiga o le taimi nei e sili atu le taua, vave faasee le faasee, Vaega o le Abpere;
Saoasaoa a1: A o le ata tipi o loʻo i lalo ifo nai lo le seti tipi o loʻo iai nei, O le saoasaoa taua na faʻateleina e ala i le saoasaoa o le savali afi;
Faasee a2: A o le ata tipi e sili atu le maualuga atu nai lo le seti tipi o le taimi nei, O le saoasaoa tau faʻaititia e ala i faʻaulu mai o le savali afi;
Swing Lima Nei: Le aoga tau, E faasa;
Taofi le taimi: Ina ua maeʻa le otometi faiga o loʻo iai nei, O le a toe iloa le taimi nei pe a uma le vaitaimi. Afai e itiiti ifo nai lo le setiina o le taimi nei, O le auala savali e otometi ona amata; iunite sekone, Le aoga tau, E faasa;
Maualuga o taimi nei: O le tele o le tele o le afi, Vaega o le Abpere;
Sili Atu Maualuga: Lauiloaina o le Upega Talenting Vaelue silivave fetuunaiga o ata;
Sili atu le savali: Lē saʻo le tapulaʻa;
Tauvaga saoasaoa: I le taimi otometi tipi, O le mamao o le pulea o le auala o le savali saoasaoa afi afi = 50% o lenei tapulaa;
Faateleina le mafaufau: A o le autu afi maimoa maimoa i le taimi nei faateleina, O taimi uma e sili atu ai le faateleina o lenei taua, O le savali afi afi;
Faʻaititia le mafaufau: A faʻapea o le faʻamatalaga o le taimi nei o le tau afi, Ma o taimi taʻitasi o le faʻaitiitia o le tau e sili atu i lenei tau, O le Savali afi na faaseseina;
Lagona lelei: Faʻaopopo ma toese le faʻaopoopoga o le faʻaopoopoina o le faʻauiga tulaga;
Seti le taimi nei: Otometi tipi, O le Urwordo o le Main Frist Aptiptions manatu o iai nei. Afai o lenei taua ua sili atu,O le savali afi e amata ona faasee;Lalo ifo o lenei tau, O le savali afi e amata ona faanatinati;iunite: Ampere;
Alu i fafo: A amata le otometi faiga, Afai o le autu afi manatu o le taimi nei e itiiti ifo nai lo lenei taua,O le a i ai i le IDINGE MODE.IF o le Greterthan lenei taua, O le a alu ese mai le taimi o le taimi ma ulufale i le tipiina auala.;
Leai-avega o iai nei:Ina ua amata le otometi faiga, Afai o le autu afi manatu o le taimi nei e itiiti ifo nai lo lenei taua,E leai-avega faiga, O le a alu ese mai le leai-uta faiga ma ulufale i le tipiina auala.;
Swing Sea Street: Uluai saoasaoa o le Swing Smath Mor i le amataga;
Tipiina auala: Ki le i le va o Blade na vaaia ma uaea na vaaia auala, Ma o le paramet o le a suia e tusa ai pe a uma le ki; I le Blade na vaaia auala, O le mea e sili ona faʻatagaina ai le faʻatonuga, A o i le uaea vaai mode, E leai se afi afi afi;
Taimi malolo: A o le autu afi maimoa mai le taimi nei sili atu le taofi o le taimi nei, O le faʻamatalaga o loʻo i ai nei o le a faʻaauau pea ona iloa. O le taimi debaunce taimi o le umi o lenei faʻaauau pea le iloa. Peter i lenei taimi, Afai o le autu afi o le taimi nei sili atu nai lo le taofi o le taimi nei, O le savali o le a taofi;a leai, O le savali o le a taofi. O le afi o le a alu pea;
Taofi le taimi nei: O le autu afi manatu o loʻo sili atu i lenei taua, ma le auala savali o le a taofi;Iunite o le amore;
Ese le le lelei: O le uluaʻi tau o le savali o le taʻavale saoasaoa tapulaʻa pe a oʻo le faʻaoʻo le saʻo 50% o lenei taua;

6.O LE FOLIGA O LE TOE TULAGA OLINGINGING

7.Tatala le saoasaoa

The final interpretation right of this product belongs only to our company.

Faʻataʻitaʻiga: DH12S-LD

Masini talafeagai:crawler wire saw machine

Oloa oloa

Tusi: E mafai ona e filifilia se tasi o le tolu antennas. The suction cup antenna is standard by default.

O le Repram Reply Tralin Faamatalaga

FAʻAALIGA FAʻAFITAULI

Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (Paramests fetuunai)
Linear correction value: O: -99-99 (1 unit is about 0.02V)

Maualalo voltage: O le mea e sili ona maualalo ai le paʻu, please replace the battery.

Taavale na pauu: O le uaealesi e le mafai ona motusia. Faʻamolemole siaki le malosi o le tagata e suʻe, mana e toe i ai, and restart the remote control.

Fofoga o le Repree Production Action Prociction faatonuga

1.Turn on the remote control

When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, Liliu le mana eletise, andthe display will show the motor speed, indicating successful startup.

2.Large motor and speed regulation

Liliu le “Luma / Suiga” Alu i luma, the receiver’s large motor will turn on, and the display will show forward

Liliu le “Luma / Suiga” Suia i le fesuiaiga, the large motor of the receiver will turn on in reverse, and the display will show reverse

Liliuina le “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;

3.Small motor and speed regulation

Move the “Luma / Suiga” Alu i luma, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward

Liliu le “Luma / Suiga” Suia i le fesuiaiga, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse

4.Turn left and right

Liliu le “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left

Liliu le “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right

5.Turn in place

I le tusi lesona:
Turn left in place: Fetaomi ma taofi le “Enable” button, liliu le “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;

Turn right in place: Fetaomi ma taofi le “Enable” button, liliu le “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;

6.Small motor speed limit adjustment

I le otometi faiga: press and hold the “Enable” faamau ma liligi le “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;

7.Otometi tipi

The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;

8. Straight line correction

When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: I le tusi lesona, press and hold the “Enable” faamau ma liligi le “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 i 90; correction voltage of one correction unit is about 0.02V;

9. Parameter menu (Tagata faʻaaoga e faʻasaina mai le suia i totonu e aunoa ma se faʻatagaina)

Some functions of the remote control can be adjusted through parameters. I le tusi lesona, when the small motor speed S2 is 10, Toso le luma / toe suia le ki i le tolu taimi i le laina, and then push it down three times in a row to enter the parameter menu;
Alu i fafo le tapulaa menu: choose to save or not save, then press the enable button to confirm the exit;
Maualuga o taimi nei: the operating rated current of the cutting motor is 80% of this currentt;
Saoasaoa pule: automatic cutting control parameters, lē oʻo mai 800, E faasa;
Faasee faalemafaufau: automatic cutting control parameter. O le taimi o le tipiina o le suiga o le taimi nei e sili atu le taua,deceleration begins.
Saoasaoa a1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Faasee a2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Amata le tagata lava ia: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Sili atu le savali: the maximum speed of the small motor.
Tipi nei: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Tapulaa le saoasaoa tapulaa: the default maximum speed of automatic cutting speed when turning on the machine.
Otometi faiga: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Tauvaga saoasaoa: the maximum speed of the small motor during automatic cutting.
Sili Atu Maualuga: maximum speed of large motor.

O LE FOLIGA O LE TOE TULAGA OLINGINGING

Tatala le saoasaoa

The final interpretation right of this product belongs only to our company.

Faʻataʻitaʻiga：Atwgp-12

Fetuunaiga faiga: Uma le CNC faiga ma Houndwel Interface

O lenei oloa o se tusi nusipepa na faʻaaogaina ma le CNC masini meafaigaluega. Ua leva ona faʻaaogaina i fanua e pei o le CNC masini meafaigaluega, Cnc laga, masini paka,CNC togitogia ma milling masini. O lenei oloa faʻaaogaina uaea leai se fesoʻotaʻiga, Aveesea le manaʻoga mo le faʻaaogaina o le tautotogo paʻu uaea, Faaitiitia le le lava atuatuvale na mafua mai i uaea, Aveesea cable toso, Suauu ma isi vailaau, ma le faia o gaioiga sili atu faigofie. O le oloa afifi e aofia ai le tagata e mauaina ma le uaealesi eletise. O le tagata e mauaina e fesoʻotaʻi i le CNC meafaigaluega e ala i se upega tafailagi, ma le uatini (lima tuufaatasi) o loʻo fesoʻotaʻi ma fesoʻotaʻi ma le tagata e mauaina e ala i le uaealesi o loʻo lafoina tekinolosi. O le tagata faafoe o loʻo taofia le kapeti ma mafai ona aveese le fesoʻotaʻiga o le penefiti o le tautotogo uaea ma alu saoloto. Mo le tele-fua gaosi susu, Cnc laga, Malaga masini masini, Oti ma isi talosaga, it brings great convenience and improves work efficiency.

Lagolagoina le tele o polokalame ituaiga e pei o tagata valea, Mitsubishi, Fanac, Taiwanxindai, Booyuan, Fagor, Huazhong cnc, Guangzhou cnc, and otherCNC systemsthat support handwheel interfaces.

1. Faʻaaogaina le 433MHZ uaealesi fesoʻotaʻiga masani, o le uaealesi o le masani ai 40 mita;
2. Ia e talia le otometi le aoga 32 seti o le uaealesi e pei o le taimi lava e tasi e aunoa ma le afaina o le tasi ma le isi;
3. Lagolagoina le taofiga o le taofi taofi ma 3 O le Comple button sui galuega;
4. Lagolagoina le tele o axis filifilia filifilia o 6-axis, 7-axis, 8-axis, 9-axis, 10-axis ma 12-axis, ma le 3-saoasaoa ma le 4-saoasaoa faʻalauteleina.axis filifiliga ma faʻalauteleina switches lagolago eseese faʻailoga ituaiga pei, Point-i-manatu, efuefu code, uat.;
5. Lagolagoina 5V o le tele o toso faailo, 24V Tosoina faʻailoga ma isi pulse faʻailoga faʻailoga;
6. Maualalo le mana taumafaina, 2 O le aa maa e mafai ona faʻaaogaina mo sili atu nai lo 1 masina;
7. Lagolagoina mai fafo faaopoopoga antenna, Fetaui lelei mo le tele o masini masini faapipiiina siosiomaga, Mautinoa faailoilo le mautu;

Tusi:
1. Tulaga Faailoga Malamalama:
Faaiuga moli (taumatau): O le faʻailo malamalama e masani lava pe a faʻatautaia le limatusi, ma e le malamalama i luga pe a le o le gaioiga;
Maualalo voltage ala alofa (tauagavale): A e maualalo le mana o le maa,O le ala o le moli moli moli po o nofo i luga;
2. Faamautu le ki:
Ina ua uma ona fetaomi ma uuina le faʻamau faʻamau, O le axis filifiliga ma faʻalauteleina faʻailoga o loʻo faʻagaioia, Ma o le sana e aofia ai le sao o le oloa;
3. Pulea Pusa:
O le faamau e aunoa ma se galuega e mafai ona pulea se fetuutuunai ki i luga o le lisi;

Com1: Malie tulaga mo le Axis Filifiliga Faalauteleina Faaituu; mafai ona fesoʻotaʻi i le 0-24v lautele Faʻalauiloa
Masina: Masani nofoaga o 3 Tulouna le POLOKALAMA;

*Axis Filifiliga ma Faalauteleina e mafai ona filifilia e ala i polokalama, Coding po o le tulaga-i-manatu, Faʻamolemole talanoa le aufaigaluega mo faʻamatalaga

The final interpretation right of this product belongs to our company.

Fetuunaiga faiga: Uma le CNC faiga ma Houndwel Interface

O lenei oloa o se tusi nusipepa na faʻaaogaina ma le CNC masini meafaigaluega. Ua leva ona faʻaaogaina i fanua e pei o le CNC masini meafaigaluega, Cnc laga, masini paka,CNC togitogia ma milling masini. O lenei oloa faʻaaogaina uaea leai se fesoʻotaʻiga, Aveesea le manaʻoga mo le faʻaaogaina o le tautotogo paʻu uaea, Faaitiitia le le lava atuatuvale na mafua mai i uaea, Aveesea cable toso, Suauu ma isi vailaau, ma le faia o gaioiga sili atu faigofie. O le oloa afifi e aofia ai le tagata e mauaina ma le uaealesi eletise. O le tagata e mauaina e fesoʻotaʻi i le CNC meafaigaluega e ala i se upega tafailagi, ma le uatini (lima tuufaatasi) o loʻo fesoʻotaʻi ma fesoʻotaʻi ma le tagata e mauaina e ala i le uaealesi o loʻo lafoina tekinolosi. O le tagata faafoe o loʻo taofia le kapeti ma mafai ona aveese le fesoʻotaʻiga o le penefiti o le tautotogo uaea ma alu saoloto. Mo le tele-fua gaosi susu, Cnc laga, Malaga masini masini, Oti ma isi talosaga, it brings great convenience and improves work efficiency.

Lagolagoina le tele o polokalame ituaiga e pei o tagata valea, Mitsubishi, Fanac, Taiwanxindai, Booyuan, Fagor, Huazhong cnc, Guangzhou cnc, and otherCNC systemsthat support handwheel interfaces.

1. Faʻaaogaina le 433MHZ uaealesi fesoʻotaʻiga masani, o le uaealesi o le masani ai 40 mita;
2. Ia e talia le otometi le aoga 32 seti o le uaealesi e pei o le taimi lava e tasi e aunoa ma le afaina o le tasi ma le isi;
3. Lagolagoina le taofiga o le taofi taofi ma 3 O le Comple button sui galuega;
4. Lagolagoina le tele o axis filifilia filifilia o 6-axis, 7-axis, 8-axis, 9-axis, 10-axis ma 12-axis, ma le 3-saoasaoa ma le 4-saoasaoa faʻalauteleina.axis filifiliga ma faʻalauteleina switches lagolago eseese faʻailoga ituaiga pei, Point-i-manatu, efuefu code, uat.;
5. Lagolagoina 5V o le tele o toso faailo, 24V Tosoina faʻailoga ma isi pulse faʻailoga faʻailoga;
6. Maualalo le mana taumafaina, 2 O le aa maa e mafai ona faʻaaogaina mo sili atu nai lo 1 masina;
7. Lagolagoina mai fafo faaopoopoga antenna, Fetaui lelei mo le tele o masini masini faapipiiina siosiomaga, Mautinoa faailoilo le mautu;

Tusi:
1. Tulaga Faailoga Malamalama:
Faaiuga moli (taumatau): O le faʻailo malamalama e masani lava pe a faʻatautaia le limatusi, ma e le malamalama i luga pe a le o le gaioiga;
Maualalo voltage ala alofa (tauagavale): A e maualalo le mana o le maa,O le ala o le moli moli moli po o nofo i luga;
2. Faamautu le ki:
Ina ua uma ona fetaomi ma uuina le faʻamau faʻamau, O le axis filifiliga ma faʻalauteleina faʻailoga o loʻo faʻagaioia, Ma o le sana e aofia ai le sao o le oloa;
3. Pulea Pusa:
O le faamau e aunoa ma se galuega e mafai ona pulea se fetuutuunai ki i luga o le lisi;

Com1: Malie tulaga mo le Axis Filifiliga Faalauteleina Faaituu; mafai ona fesoʻotaʻi i le 0-24v lautele Faʻalauiloa
Masina: Masani nofoaga o 3 Tulouna le POLOKALAMA;

*Axis Filifiliga ma Faalauteleina e mafai ona filifilia e ala i polokalama, Coding po o le tulaga-i-manatu, Faʻamolemole talanoa le aufaigaluega mo faʻamatalaga

The final interpretation right of this product belongs to our company.