Uaealesi eletise eletise.

Faʻamatalaga

1.Oloa Folasaga

Wireless electronic handwheel is used for manual guidance, tulaga, tool setting and
other operations of CNC machine tools. O lenei oloa e aofia ai le uaealesi,
eliminating the traditional spring wire connection, Faʻaititia o mea leaga na mafua mai i le uaea,
eliminating the disadvantages of cable dragging, oil stains, uat., and is more convenient to
operate. It is widely used in CNC machine tools such as gantry machining centers, gantry
vertical lathes, CNC gear processing machines, and can be adapted to a variety of CNC
systems on the market, pei o tagata valea, Mitsubishi, Fanac, syntec and other CNC system
brands.

2.Oloa Vaega

1. Adoptt 433mhz Wireless Pupuni Tekonolosi, E leai se aoga 80 mita;
2. Adopt automatic frequency hopping function, use 32 sets of wireless remote controllers at the
same time without affecting each other;
3. Lagolago a le Student Seti faamau, and after the handwheel is turned off, the emergency stop
button is still valid;
4. Lagolago 6 Tuutuuga Feagaiga, Sui i le io faailoilo;
5. Lagolago 6-Axis pulea, 7-12 Axis pulea mafai ona masani;
6. Lagolagoina 1x,10X, 100X pule ma mafai ona sili atu le maualuga o le 1000x;
7. Supports the enable button function, output switch l0 sianals. axis filifiliga,maanification
and encoder.;
8. Support axis selection and magnification selection encoder output;
9. Support standard Type-C charging, 5V-2A charging specification, built-in battery specification
14500/1100mAh.

3.Oloa Faapitoa

4.Oloa Galuega Folasaga

Faamatalaga：
①Emergency stop button：
When the emergency stop button is pressed, the two emergency stop IO outputs on
the receiver are disconnected, and all handwheel functions are invalid. When the emergency
stop is released, O le faalavelave faʻafuaseʻi na taofi le iO o loʻo tapunia, and all handwheel
functions are restored; and after the handwheel is turned off, the emergency stop IO output
of the receiver is still valid when the emergency stop button is pressed.

②Enable button:
Press any one of the enable buttons on both sides, and the two groups of enable IO
outputs on the receiver will be turned on. Release the enable button and the enable IO
output will be turned off. In addition, you need to press and hold the enable button before
switching the axis selection ratio and shaking the handwheel. This function can be
canceled through the configuration software.
③Axis selection switch (Malosiaga ki):
Press and hold the enable button and switch the axis selection switch to switch the
moving axis controlled by the handwheel. Switch this switch from OFF to any axis and
turn on the handwheel power.

④Pulse encoder:
Press and hold the enable button and shake the pulse encoder to send out a pulse
signal to control the movement of the machine axis.

⑤Battery indicator:
The hand wheel power display, all bright means full power, all off means it is not
turned on or has no power, the first left grid flashes, indicating that the power is too low,
please charge in time.
⑥Signal Lights:
If the signal light is on, it means the handwheel is being operated and the signal is
normal; if the signal light is off, it means there is no operation, or it is being operated but
the wireless signal is not connected.

5.Oloa oloa

6.Oloa faapipiiina taiala

6.1 Product Installation Steps
1. Install the receiver in the electrical cabinet using the clips on the back, or install it in
the electrical cabinet using the screw holes at the four corners of the receiver.
2.Refer to our receiver wiring diagram, compare it with your on-site equipment, and connect
the equipment to the receiver via cables.
3.After the receiver is fixed, O le antena na lagolagoina ma le tagata e talia tatau ona fesoʻotaʻi,
and the outer end of the antenna must be installed or placed outside the electrical cabinet. It
is recommended to place it on the top of the electrical cabinet for the best signal effect. It is
forbidden to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4. Mulimuli ane, turn on the handwheel power switch and you can operate the machine by
handwheel remote control.

6.2 E maua le faʻapipiʻiina o faʻamatalaga

6.3 Mauaina o le apaau o le ata tusi

7.Mea gaosiga o mea
1. The machine is powered on, the receiver is powered on, the receiver working indicator
light flashes, the wireless electronic handwheel has the battery installed, the battery cover
is fastened, the wireless electronic handwheel power switch is turned on, and the
handwheel power light is on;
2. Filifili le faamaopoopo Axis: Fetaomi ma taofi le faamau faamau, switch the axis selection
ki, and select the axis you want to operate on;
3. Filifili Faalauteleina: Fetaomi ma taofi le faamau faamau, switch the magnification switch,
and select the magnification level you need;
4. Agai Axis: Fetaomi ma taofi le faamau faamau, Filifili le Axis Filifiliga ki, filifili
the magnification switch, and then rotatethe pulse encoder to rotate the positive moving axis
clockwise and the negative moving axis counterclockwise;
5. Fetaomi ma taofi soʻo se mea e faʻamau ai, and the corresponding button IO output of the
receiver will be turned on. Release the button to turn off the output;
6. Fetaomi le Student Stud button, the corresponding emergency stop IO output of the
receiver is disconnected, the handwheel function is disabled, release the emergency stop
button, the emergency stop IO output is closed, and the handwheel function is restored;
7. Afai o le Hundwel e le faʻagaioia mo se taimi o le taimi, it will automatically enter sleep
mode to reduce power consumption. O afea e toe faaaoga ai, the handwheel can be
activated by pressing the enable button;
8. Afai o le Hundweel e le faaaogaina mo se taimi umi,it is recommended to switch the handwheel
shaft to the OFF position, Tapē le tamaloa aseta, ma sosolo le ola o le ola.

8.Oloa faʻataʻitaʻiga faʻamatalaga

① ：DWGP represents the appearance style

② ：Ua e pue o mea taua:
01: Indicates that the pulse output signals are A and B, and the pulse voltage is 5V; Pulse
quantity 100PPR;
02: Indicates that the pulse output signals are A and B, and the pulse voltage is 12V; Pulse
quantity 25PPR;
03: Indicates that the pulse output signal is A B、A-、B-； Tulei voltage 5v; Pulse quantity 1
00PPR;
04: Faʻailoa mai se maualalo-tulaga npn tatala le matagaluega galuega, ma le pulse Upt Upper o le A ma B; le
number of pulses is 100PPR;05: Faʻaalia le maualuga-maualuga pnp faʻamatalaga, pulse output signals
are A and B; pulse quantity is 100PPR;
③ : O le sui o le numera o le axis filifiliga switches, 6 sui 6 axis, 7 sui 7 axis.
④ : represents the type of axis selection switch signal, O se faʻatusatusaga o le taimi o le faʻailoga,
B represents encoded output signal;

⑤ : represents the type of magnification switch signal,
O se faʻatusatusaga o le taimi o le faʻailoga, B represents encoded output signal;
⑥ : represents the number of custom buttons, 6 sui 6 Tuutuuga Feagaiga;
⑦ : represents the power supply for the system handwheel, 05 sui o le 5V paoa sapalai,
ma le 24 represents 24V power supply.

9.Product Troubleshooting

10. Maintenance and care

1. Faʻamolemole faʻaaoga i se eleele mago i le potu vevela ma le mamafa e faʻalautele ai lona olaga tautua;
2. Faʻamolemole aloese mai le faʻaogaina i siosiomaga le masani ai pei o timuga ma vai paʻu e faʻalautele ai le olaga tautua;
3. Faʻamolemole Faʻatupuina foliga o le Faʻatonuga Mamafa e faʻalautele lona olaga tautua;
4. Faʻamolemole aloese mai le faʻamamaina, pauu, palu, etc. to prevent damage to the precision components inside
the handwheel or accuracy errors;
5. A le faaaogaina mo se taimi umi, Faʻamolemole teu le lima o le lima i se mea mama ma saogalemu;
6.I le taimi o le teuina ma felauaiga, O le mafaufau e tatau ona totogi i le susu ma le le tetee.

11.Faamatalaga saogalemu

1. Faʻamolemole faitau ma le faʻaeteete i lalo ae le i faʻaaogaina ma faʻasaina le tagata polofesa mai le faʻagaioiga;
2. When the battery level is too low, please charge it in time to avoid errors caused by insufficient
battery and inability to operate the handwheel;

3. Afai o le toe faaleleia e manaomia, Faʻamolemole faʻafesoʻotaʻi le gaosi oloa. Afai o le leaga e mafua mai i le toe faaleleia, O le tagata gaosi oloa o le a le tuuina atu se tuutuuga.