5.Hordhac Shaqada Wax soo saarka

② Enable buttons on both sides

③Button area

12 bayaarid

④ Axis Selection and Magnification Switch

One 9-gear axis selection switch; one 3-gear magnification switch.

⑤ Emergency Stop Switch

Remote control emergency stop switch.

⑥ Display Screen Area

It can display coordinates, status and other information.

⑦ Electronic Pulse Encoder

One electronic pulse encoder with 100 pulses per revolution.

⑧ Type-C Charging Port

It is used for connection between the charger and the remote control.

The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key

6. Product Accessories Diagram

7. Receiver and Wiring Ports

8. Configure network access

9. Test Instructions

1.Hordhaca Waxsoosaarka

2.Astaamaha wax soo saarka

Riix oo hay badhanka suuxinta, then toggling the axis selection switch can control the movement of axis .Press and hold the enable button, then toggle the axis selection switch to switch the motion axis controlled by the remote control. Toggle the switch from the OFF position to any axis position, and the remote control will power on automatically.

④ Pulse Encoder:

Press and hold the enable button and rotate the pulse encoder, it will output pulse signals to control the movement of the machine axis.

⑤ LCD Display Screen:

5. Product Accessories Diagram

 

6. Tilmaanta Rakibaadda Waxsoosaarka Waxqabadka

6.1 Talaabooyinka rakibaadda wax soo saarka

1. Install the receiver in the electrical cabinet via the buckle on its back, or mount it inside the electrical cabinet through the screw holes at the four corners of the receiver.

2. Tixraac jaantuskayaga soo-jeedinta, isbarbar dhig qalabkaaga goobta, and connect the equipment to the receiver with cables.

3. After the receiver is fixed in place, install the supporting antenna of the receiver properly. Mount or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for optimal signal performance. Do not leave the antenna uninstalled or place it inside the electrical cabinet; haddii kale, signal failure may occur.

4. Ugu dhambayntii, turn on the remote control power switch, then you can remotely operate the machine via the remote control.

6.2 Receiver Installation Dimensions

6.3 Qiyaasta tixraaca ee qaataha

7. Tilmaamaha Howlgalka Wax Soo Saarka

1. Ku shub mishiinka iyo qaataha. The receiver operation indicator flashes. After the wireless electronic remote control is fully charged, toggle it from the OFF gear to the X-axis gear, and the remote control display lights up.

2. Select the axis : Riix oo hay badhanka suuxinta, toggle the axis selection switch to select the axis to be operated.

3. Select the magnification: Riix oo hay badhanka suuxinta, toggle the magnification switch to select the required magnification gear.

4. Axis movement: Riix oo hay badhanka suuxinta, select the axis selection switch and the magnification switch, then rotate the pulse encoder. Rotate clockwise to move the axis in the positive direction, and rotate counterclockwise to move the axis in the negative direction.

5. Riix oo hayso badhanka caadada ah, the corresponding button IO output of the receiver will turn on; release the button, and the output will turn off.

6. Riix batoonka joogtada ah ee joogsiga, the corresponding emergency stop IO output of the receiver disconnects and the remote control function becomes invalid. Release the emergency stop button, the emergency stop IO output closes and the remote control function is restored.

7. If the wireless remote control is not operated for a period of time, waxay si toos ah u gali doontaa qaabka hurdada si loo yareeyo isticmaalka tamarta. It can be used normally again by pressing the enable button again.

8.If the wireless remote control is not used for a long time, turn the axis switch to OFF to turn off the power and extend battery life

8. Sharraxaadda Moodeelka Qaabka

①：UWGP stands for appearance style.

②：Pulse Output Parameters：

05: Waxay tuseysaa wax soo saarka isha PNP oo heer sare ah, oo leh calaamadaha wax soo saarka garaaca wadnaha ee A iyo B; The number of pulses is 100PPR.

③：Represents the axis selection switch quantity; 6 stands for 6 faaliyad, 7 stands for 7 faaliyad, and so on.

④: Represents the signal type of the axis selection switch.A stands for point-to-point output signal, and B stands for encoder output signal.

⑤: Represents the signal type of the magnification switch.A stands for point-to-point output signal, and B stands for encoder output signal.

⑥: Waxay ka dhigan tahay tirada badhamada gaarka ah; 3 corresponds to 6 custom buttons.

⑦: Represents the power supply for the system remote control. 05 stands for 5V power supply, iyo 24 stands for 24V power supply.

⑧: Represents the contact charging mode. It starts charging automatically when placed back on the charging base.

9. Dhibaatooyinka wax soo saarka

 

10. Maintenance and upkeep

1. Please use it in a dry environment at room temperature and pressure to extend its service life.

2. Please avoid using in abnormal environments such as rain and water to extend the service life.

3. Please keep the appearance of the remote control clean to extend its service life.

4. Please avoid crushing, dropping, or bumping, itc. to prevent damage to the precision components inside the remote control or accuracy errors.

5. Haddii aan la isticmaalin muddo dheer, please store the remote control in a clean and safe place.

6. Avoid moisture and shock during storage and transportation.

1.Hordhaca Waxsoosaarka

Qalabka gacmeedka elektaroonigga ah ee wireless-ka ah waxaa loo isticmaalaa hagida gacanta, boos u dhigasho, qalabaynta iyo
hawlaha kale ee qalabka mashiinka CNC. Alaabtaani waxay qaadanaysaa tikniyoolajiyadda gudbinta wireless,
Ciribtirka isku xirka siligga ee dhaqanka, Yaraynta khaladaadka qalabka oo ay sababaan fiilooyinka,
baabi'inta faa'iido darrada fiilooyinka jiidista, wasakh saliid, iwm., waana ku habboon tahay
hawlgeli. Waxaa si weyn loogu isticmaalaa qalabka mashiinka CNC sida xarumaha machining gantry, gantry
lathes toosan, Mashiinnada farsamaynta marsho ee CNC, waxaana lagu hagaajin karaa noocyo kala duwan oo CNC ah
nidaamyada suuqa, sida Siemens, Mitsubishi, Fanac, syntec iyo nidaamka kale ee CNC
brands.

2.Astaamaha wax soo saarka

1. Kordmada 433mhz teknoolojiyadda isgaarsiinta wireless ah, masaafada hawlgalka wireless-ka ah waa 80 mitir;
2. Kordhinta shaqooyinka soo noqnoqda oo toos ah, isticmaal 32 sets oo ah kantaroolayaasha fogaanta wireless ee ku yaal
isla mar ahaantaana aan is saamaynayn;
3. Taageer batoonka joogtada ah ee joojinta, iyo ka dib markii giraangiraha la demiyo, joogsiga degdega ah
badhanka wali waa sax;
4. Taageerid 6 badhamada caadiga ah, Soo Saabsan IO SAXIIXA IO;
5. Taageer 6-Axis Xakamaynta, 7-12 Xakamaynta Axis waa la habeyn karaa;
6. Waxay taageertaa 1x,10X, 100X Xakamaynta iyo waa la isticmaali karaa ugu badnaan 1000x;
7. Waxay taageertaa shaqada badhanka karti, wax soo saarka beddelka l0 sianals. xulashada axis,hagaajin
iyo codeer.;
8. Taageer xulashada dhidibka iyo soo saarista codeeyaha xulashada weynaynta;
9. Taageer dallacaadda nooca-C caadiga ah, 5V-2a tilmaanta tigidhada, qeexitaanka batteriga ku dhex jira
14500/1100mAh.

3.Faahfaahinta alaabada

4.Hordhac Shaqada Wax soo saarka

Qoraalada：
Badhanka Joogtada ah：
Marka badhanka joogsiga degdega ah la riixo, Labada joogsi degdega ah ee IO ayaa daaran
qaataha ayaa go'ay, iyo dhammaan hawlaha taayir-gacmeedku waa kuwo aan shaqayn. Marka xaalad degdeg ah
joogsiga waa la sii daayaa, Soosaarista xaaladaha degdegga ah ee io ee soo-saarkii qaataha ayaa xiran, iyo dhammaan taayirrada gacanta
hawlaha la soo celiyo; iyo ka dib markii giraangiraha la demiyo, joogsiga degdega ah ee wax soo saarka IO
of the receiver is still valid when the emergency stop button is pressed.

②Daar batoonka:
Riix mid ka mid ah badhamada karti u leh labada dhinac, iyo labada kooxood ee awood IO
wax-soo-saarka soo-dhoweynta waa la daari doonaa. Sii daa badhanka karti iyo awood IO
wax soo saarka waa la damin doonaa. Intaa waxaa dheer, waxaad u baahan tahay inaad riixdo oo aad qabato badhanka karti ka hor
beddelashada saamiga xulashada dhidibka iyo ruxitaanka giraangiraha gacanta. Shaqadani waxay noqon kartaa
canceled through the configuration software.
③Beddelka xulashada dhidibka (korontada):
Riix oo hay batoonka karti oo u beddel xulashada dhidibka si aad u bedesho
dhidibka dhaqaaqa ee gacanta lagu maamulo. Damikan ka beddel dhidibo kasta oo
turn on the handwheel power.

Codeeyaha garaaca garaaca:
Riix oo hayso badhanka suuxinta oo rux garaaca garaaca wadnaha si aad ugu dirto garaaca wadnaha
signal to control the movement of the machine axis.

⑤ Tilmaamaha baytari:
Muujinta awoodda giraangiraha gacanta, dhammaan dhalaalaya waxay ka dhigan tahay awood buuxda, dhan off ka dhigan tahay ma aha
shid ama aan awood lahayn, shabagga bidix ee hore ayaa iftiimaya, taasoo muujinaysa in awooddu aad u hoosayso,
please charge in time.
⑥ Nalalka Calaamadaha:
Haddii nalka calaamaduhu shidan yahay, waxay la macno tahay giraangiraha gacanta ayaa lagu shaqaynayaa oo calaamaduhu waa
caadi; haddii nalka calaamaduhu uu dansan yahay, waxay la macno tahay in aanu jirin wax qalliin ah, ama waa la qalay laakiin
the wireless signal is not connected.

5.Jaantusyada Qalabka Alaabada

6.Tilmaanta Rakibaadda Waxsoosaarka Waxqabadka

6.1 Talaabooyinka rakibaadda wax soo saarka
1. Ku rakib soo-dhawrka golaha korantada adiga oo isticmaalaya cajaladaha dhabarka ku yaal, ama ku rakib
the electrical cabinet using the screw holes at the four corners of the receiver.
2.Tixraac jaantuskayaga soo-jeedinta, isbarbar dhig qalabkaaga goobta, oo ku xir
the equipment to the receiver via cables.
3.Ka dib markii qaataha la hagaajiyo, Anteenadu ku qalabaysan yahay qaataha waa in lagu xiraa,
iyo dhamaadka bannaanka ee anteenada waa in lagu dhejiyaa ama lagu meeleeyaa meel ka baxsan golaha wasiirada korantada. Waxan
waxaa lagula talinayaa in la dhigo dusha sare ee golaha korantada si ay u saameynayso calaamadda ugu fiican. Waa
mamnuuc in laga tago anteenada oo aan xidhnayn ama la dhigo anteenada gudaha golaha korantada,
which may cause the signal to be unusable.
4. Ugu dhambayntii, Dami korantada gacanta oo waxaad ku shaqeyn kartaa mashiinka
handwheel remote control.

6.2 Cabirrada rakibaadda qaataha

6.3 Qiyaasta tixraaca ee qaataha

7.Tilmaamaha Howlgalka Wax Soo Saarka
1. Mashiinku waa daaran yahay, qaataha waa daaran yahay, tusaha shaqada qaataha
iftiimaya, giraangiraha gacanta ee elektarooniga ah ee wireless ayaa bateriga lagu rakibay, daboolka batteriga
waa la xidhay, taleefoonka gacanta ee bilaa-waayirka ah ayaa shidmay, iyo
Korontada giraangiraha gacantu waa shid;
2. Dooro dhidibka isku xidhka: Riix oo hay badhanka suuxinta, beddel xulashada dhidibka
beddelo, oo dooro dhidibka aad rabto inaad ku qaldo;
3. Xulo isweydaarsiga: Riix oo hay badhanka suuxinta, beddelo daaran weynaynta,
oo dooro heerka weyneynta aad u baahan tahay;
4. Dhaqaajinta dhidibka: Riix oo hay badhanka suuxinta, Xulo Suuxinta xulashada xulashada, doorasho
weyneynta, ka dibna ku wareeji encoder-ka garaaca garaaca si uu u rogo dhidibka dhaqaaqa togan
dhanka saacada iyo dhidibka dhaqaaqa taban ee dhanka saacada;
5. Riix oo hayso badhanka caadada ah, iyo badhanka u dhiganta IO soo saarka ee
qaataha waa la daari doonaa. Sii daa badhanka si aad u damiso wax soo saarka;
6. Riix batoonka joogtada ah ee joogsiga, joogsiga degdega ah ee u dhigma wax soo saarka IO ee
qaataha waa go'ay, Shaqadii gacan-gacmeedku waa naafo, sii daaya joogsiga degdega ah
guluus, joogsiga degdega ah ee IO waa xidhan yahay, oo shaqadii giraangiraha gacanta ayaa dib loo soo celiyay;
7. Haddii giraangiraha gacantu aanu shaqaynin in muddo ah, waxay si toos ah u geli doontaa hurdo
hab si loo yareeyo isticmaalka korontada. Marka mar kale la isticmaalo, giraangiraha gacantu wuxuu noqon karaa
dhaqaajiyay adigoo riixaya badhanka karti;
8. Haddii giraangiraha gacantu aan la isticmaalin muddo dheer,waxaa lagu talinayaa in la beddelo wheel wheel
usheeda dhexe ilaa booska OFF, dami awoodda taayirrada gacanta, and extend the battery life.

8.Sharraxaadda Moodeelka Qaabka

① ：DWGP waxay matalaysaa qaabka muuqaalka

② ：Halbeegyada wax soo saarka garaaca wadnaha:
01: Waxay muujinaysaa in calaamadaha wax soo saarka garaaca wadnaha ay yihiin A iyo B, iyo danab garaaca wadnaha waa 5V; garaaca garaaca
tirada 100PPR;
02: Waxay muujinaysaa in calaamadaha wax soo saarka garaaca wadnaha ay yihiin A iyo B, iyo danab garaaca wadnaha waa 12V; garaaca garaaca
tirada 25PPR;
03: Waxay muujineysaa in calaamada soo saarista garaaca wadnaha ay tahay A B、A-、B-； Danab garaaca wadnaha 5V; Pulse quantity 1
00PPR;
04: Waxay muujinaysaa wax soo saarka wareegga furan ee NPN oo hooseeya, oo leh calaamadaha wax soo saarka garaaca wadnaha ee A iyo B; -ga / -da
tirada garaaca wadnaha waa 100PPR;05: Waxay tuseysaa wax soo saarka isha PNP oo heer sare ah, calaamadaha wax soo saarka garaaca wadnaha
waa A iyo B; tirada garaaca wadnaha waa 100PPR;
③ : waxay matalaysaa tirada wareejinta xulashada xulashada, 6 u taagan 6 xariiq dhexda marta, 7 u taagan 7 axis.
④ : waxay ka dhigan tahay nooca calaamada beddelka xulashada dhidibka, A waxay u taagan tahay calaamada soo saarista bar-ilaa-dhibcood,
B waxay u taagan tahay calaamada soo saarista codeed;

⑤ : waxay ka dhigan tahay nooca calaamadda beddelka weynaynta,
A waxay u taagan tahay calaamada soo saarista bar-ilaa-dhibcood, B waxay u taagan tahay calaamada soo saarista codeed;
⑥ : waxay ka dhigan tahay tirada badhamada gaarka ah, 6 u taagan 6 badhamada caadiga ah;
⑦ : waxay ka dhigan tahay sahayda korontada ee nidaamka gacan-gacmeedka, 05 waxay ka dhigan tahay koronto 5V ah,
iyo 24 represents 24V power supply.

9.Dhibaatooyinka wax soo saarka

10. Dayactirka iyo Daryeelka

1. Fadlan u isticmaal jawi qalalan heerkulka qolka iyo cadaadiska si aad u ballaariso nolosha adeegga;
2. Fadlan iska ilaali inaad ku isticmaasho jawi aan caadi ahayn sida roobka iyo biyaha oo biyuhu u dheereeyay nolosha adeegga;
3. Fadlan u dhig muuqaalka kore ee 'gacantiisa' '' ';
4. Fadlan iska ilaali tuujinta, dhicidhada, ku dhicid, itc. si looga hortago dhaawac soo gaara qaybaha saxda ah ee gudaha
taayir-gacmeedka ama khaladaadka saxda ah;
5. Haddii aan la isticmaalin muddo dheer, Fadlan ku keydi gacanta gacanta meel nadiif ah oo aamin ah;
6.Inta lagu gudajiro kaydinta iyo gaadiidka, attention should be paid to moisture and shock resistance.

11.Macluumaadka badbaadada

1. Fadlan si taxaddar leh u aqri tilmaamaha si taxaddar leh ka hor intaadan isticmaalin oo ka mamnuuc aqoonyahanada ka shaqeynta;
2. Marka heerka batarigu aad u hooseeyo, fadlan ku dallaci wakhtiga si aad uga fogaato khaladaadka ay sababto ku filnaan la'aanta
baytari iyo karti la'aanta in lagu shaqeeyo wheel wheel;

3. Haddii loo baahdo hagaajinta, Fadlan la xiriir soo-saaraha. Haddii waxyeelada ay ka dhasheen is-hagaajinta, the manufacturer will not provide warranty.

1.Hordhaca Waxsoosaarka

SNCC BOTTMOTEMER MODSOCT MESTOTTEMBER PRB06B waxay ku habboon tahay bilaa wireless
Howlaha fog ee kantaroolka ee nidaamyada kala duwan ee CNC. Waxay taageertaa dadka isticmaala ee
Habyo barnaamijyada barnaamijyada iyo horumarinta badhanka si aad u ogaato fog
Xakameynta howlo kala duwan oo ku saabsan nidaamka CNC; Waxay taageertaa dadka isticmaala ee
habayn barnaamijyo barnaamij ah oo horumarineyso tusmada soo bandhigidda si aad u ogaato firfircoonaanta
Muuji heer nidaamsan; Xakamaynta fog ee la imanayo ayaa la soo celiyaa
battery and supports Type-C interface charging.

2.Astaamaha wax soo saarka

1. Adeegsiga tikniyoolajiyadda isgaarsiinta wireless ee 433mhz, Hawlgalka wireless
Fogaantu waa 80 mitir;
2. Adeegsiga Hawlaha Howlgalka Otomaatiga ah, 32 noocyo fog fog
Xakameeyayaasha ayaa la istcimaali karaa isla waqtigaas oo aan isoonaynin midba midka kale;
3. Taageerid 12 Badhanka Cuntada Caadooyinka;
4. Taageer 2.8-inji shaashadda, Muuji barnaamijyada caadada ee maadada;
5. Taageerid 1 6-bedelka doorashada dhidibka xawaaraha, Kaas oo la habayn karo;
6. Taageerid 1 7-furaha weyneynta xawaaraha, Kaas oo la habayn karo;
7. Taageerid 1 wheel wheel, 100 Puls / rog;
8. Taageer dallacaadda nooca-C caadiga ah; 5V-2a tilmaanta tigidhada; baytari
specification 18650/12580mWh battery.

3.Mabda'a shaqada

4. Faahfaahinta alaabada

5.Hordhac Shaqada Wax soo saarka

Qoraalada：
①Dalalka korontada：
Xakamee giraangiraha gacanta si aad u furto una xirto

②Daar badhamada labada dhinac：
Badhanka awoodsiinta waa in la riixaa si loo rujiyo giraangiraha gacanta;

③Aagga badhanka gaarka ah
12 badhamada lagu habeeyay 3X4, Barnaamijyada Adeegsiga Isticmaalaha;

④ Doorashada dhidibka, daaran weynaynta
1 6-beddelka dhidibka booska, Kaas oo la habayn karo oo la barnaamijayn karo;
1 7-beddelka saamiga booska, Kaas oo la habayn karo oo la barnaamijayn karo

⑤ Dareemaha joogsiga degdega ah:
Gacmaha istaajinta joogsiga degdega ah;

⑥ Goobta bandhigga:
Muujin kara awooda hadda, calaamad, iyo nuxurka bandhigga la habeeyey;

Giraangiraha gacanta ee gacanta：
1 wheel wheel, 100 pulses/turn.

Dekedda ⑧chare:

Batariga dib loo dhisay, Waxaa lagu eedeeyay iyadoo la adeegsanayo nooca-c, KHATARTA KHATARTA 5V,
hada 1a-2a; Waqtiga lagu soo dallaco 7 saacadood;

6.Jaantusyada Qalabka Alaabada

7.Tilmaanta Rakibaadda Waxsoosaarka Waxqabadka

1. Galitaanka uruurinta USB kombiyuutarka, Kombiyuutarka si otomaatig ah ayuu u yahay
Aqoonsiga oo ku rakib darawalka aaladda USB ee aan lahayn rakibaadda gacanta;
2. Gali xamuul meesha fog ee xarkaha. Ka dib markii batteriga si buuxda loo soo oogo, jeedo
on beddelka korantada, dami koontaroolka fog, Oo shaashaduna waxay muujineysaa caadi, tee
waxaa loola jeedaa korantada waa mid guuleysata;
3. Ka dib markii la koriyo, Waad sameyn kartaa wax kasta oo ay jiraan. Xakamaynta fog
Taageer Howlgalka Duaalka Isla waqti isku mid ah. Markaad riixdo badhanka kasta, madow
Square waxay u muuqan doontaa dhinaca agtiisa signalada kantaroolka fog, Muujinaya badhanka
is valid.

8.Tilmaamaha Howlgalka Wax Soo Saarka
Kahor horumarinta badeecada iyo adeegsiga, Waxaad u isticmaali kartaa softiweerka demo-ga ee aan bixinno si aan u tijaabino
badhamada iyo muujinta kontoroolka fog, ama u adeegso demo-ga qaabeynta tixraaca ee loogu talagalay
Horumarinta Barnaamijyada Barnaamijka ee mustaqbalka;
Kahor intaadan isticmaalin barnaamijka Demo, Fadlan ku dheji soo-dhawraha USB kombiyuutarka, samayn
Hubso in kontoroolka fog laga helo uu leeyahay awood ku filan, dami beddelka korantada, ka dibna isticmaal;
Marka batoon kasta oo ku taal kantaroolka fog ay cadaadinayso, Demo tijaabada tijaabada ah ayaa soo bandhigi doona
u dhigma qiimaha muhiimka ah. Ka dib markii la sii daayo, Muujinta qiimaha ugu muhiimsan ayaa baaba'ay, taas oo muujineysa in
the button upload is normal.

9.Dhibaatooyinka wax soo saarka

10. Dayactirka iyo Daryeelka

1. Fadlan ugu isticmaal jawi qalalan oo leh heerkul caadi ah iyo cadaadis si aad u dheereeyso
nolosha adeegga;
2. Ha u isticmaalin walxaha fiiqan si aad u taabtaan aagga muhiimka ah si aad u kordhiso nolosha adeegga furaha;
3. Fadlan ku hay aagga furaha nadiifi si aad u dhinto xirashada furaha;
4. Ka fogow tuujinta oo ku dhaca inaad waxyeello u geysato kontoroolka fog;
5. Haddii aan la isticmaalin muddo dheer, Fadlan ka saar batteriga oo kaydi kontoroolka fog iyo
batteriga meel nadiif ah oo aamin ah;
6. Pay attention to moisture-proof during storage and transportation.

11.Macluumaadka badbaadada

1. Fadlan u aqri tilmaamaha si taxaddar leh kahor intaadan isticmaalin. Khibraduhu waa mamnuuc
from operating.
2. Fadlan isticmaal korantada asalka ah ama xamuul soo saar soo-saare oo caadi ah oo leh
the same specifications.
3. Fadlan ku dallac waqtiga si aad uga fogaato qalliin qaldan sababtoo ah awood aan ku filnayn oo sababa
the remote control to be unresponsive.
4. Haddii loo baahdo hagaajinta, Fadlan la xiriir soo-saaraha. Haddii waxyeelada ay ka dhasheen
is-dayactirka, the manufacturer will not provide warranty.

1.Hordhaca Waxsoosaarka

Beddelka CNC ee Beddelka ee Brotem10 waxay ku habboon tahay bilaa wireless
Howlaha fog ee kantaroolka ee nidaamyada kala duwan ee CNC. Waxay taageertaa isticmaale-qeexday
barnaamijyada in la sameeyo howlaha badhanka, oo garanaya xakameynta fog ee kala duwan ee kala duwan
Hawlaha nidaamka CNC; Waxay taageertaa barnaamijyada isticmaale-lagu qeexay ee loo adeegsado si loo horumariyo
Nalalka iftiinka si ay u iftiimiyaan oo damiyaan, oo garanaya muujinta firfircoon ee nidaamka;
Xakamaynta fog fog waxay la timaadaa batari dib loo soo celin karo iyo nooca taageerada-c
interface charging.

2.Astaamaha wax soo saarka

1. Adeegsiga tikniyoolajiyadda isgaarsiinta wireless ee 433mhz, Hawlgalka wireless
Fogaantu waa 80 mitir;
2.Adeegsiga Hawlaha Howlgalka Otomaatiga ah, 32 noocyo fog fog
Xakameeyayaasha ayaa la istcimaali karaa isla waqtigaas oo aan isoonaynin midba midka kale;
3.Taageerid 32 Badhanka Cuntada Caadooyinka;
4.Taageerid 9 Barnaamijyada muujinta ee caado ee cagta;
5.Taageer heerka IP67 ee biyaha;
6.Taageer khidmadda nooca nooca ah ee nooca c; 5V-2a tilmaanta tigidhada;
1100 mah batari weyn, oo leh shaqo hurdo otomaatig ah; garasho
Ultra-Long oo dheer oo heer sare ah;
7.Support real-time display of power.

3.Mabda'a shaqada

4. Faahfaahinta alaabada

5.Hordhac Shaqada Wax soo saarka

Qoraalada：
①botty heerka muuqaalka：
Nalalka ka dib awoodda, damida ka dib markii ay awood u leedahay;
Haddii tilmaamaha tilmaamaha batteriga uu yahay hal bar oo hagayo, Waxay ka dhigan tahay
batteriga aad buu u yar yahay. Fadlan beddel batteriga;

Haddii nalalka tilmaameyaasha batteriga ay dhammaantood yihiin oo nalalka kale ee hogaamiya ayaa dib u laabanaya iyo
ka dib, Waxay ka dhigan tahay in batteriga uu aad u yar yahay. Fadlan beddel batteriga;
Haddii tilmaamaha batteriga uusan iftiimin ama u baxo, Qalabkana ma noqon karo
bilaabay adoo riixaya oo haya batoonka korantada, Fadlan beddel batteriga;

②button aagga：32 Badbaado lagu habeeyay 4x8, Barnaamijyada Adeegsiga Isticmaalaha;

③status ayaa hogaaminaya：
Afgar: Badhanka iftiinka, Iftiinka markii badhanka la riixo oo uu tago
banaanka markii badhanka la sii daayo; Nalalka kale waa bandhigyo caado ah;

Beddelka：
Saxaafadda dheer ee 3 ilbidhiqsiyo si loo shido, Saxaafadda dheer ee 3 ilbidhiqsiyo si loo damiyo;
Dekedda ⑤chare：
Adeegso xargaha nooca-c ee lacag, KHATARTA KHATARTA 5V, hada 1a-2a; dallacidda
waqti 3-5 saacadood;

Markaad dallacsiinayso, Tilmaanta awoodda ayaa nala socota, muujinaya in ay dallacdo. Marka
si buuxda loo eedeeyo, the power indicator will show full bar without flashing.

6.Jaantusyada Qalabka Alaabada

7.Tilmaanta Rakibaadda Waxsoosaarka Waxqabadka

1 . I nzert the usb pather kombiyuutarka, Kombiyuutarka si otomaatig ah ayuu u yahay
Aqoonsiga oo ku rakib darawalka aaladda USB ee aan wax gacanta ah
2. Gali xamuul meesha fog ee xarkaha. Ka dib markii batteriga si buuxda loo soo oogo, saxaafad
oo ku hay batoonka korantada ee loogu talagalay 3 sekan. Xakamaynta fog ayaa dami doonta iyo awoodda
Tilmaanta ayaa iftiimi doonta, indicating that the power-on is successful.
3. Ka dib markii la koriyo, Waad sameyn kartaa wax kasta oo ay jiraan. Koontaroolka fog
waxay ku taageeri kartaa hawlaha dufanka ah isla waqtigaas waqti isku mid ah. Markaad riixdo badhanka kasta, -ga / -da
Iftiinka combu ee kantaroolka fog ayaa iftiimi doona, indicating that this button is valid.

8.Tilmaamaha Howlgalka Wax Soo Saarka
Kahor horumarinta badeecada iyo adeegsiga, Waxaad u isticmaali kartaa barnaamijyada demo-ga ee aan siino
Tijaabi badhamada ku yaal kontoroolka fog iyo iftiinka salka ku haysa kontoroolka fog. Waad awoodaa
also use the demo as a reference routine for future programming development.
Kahor intaadan isticmaalin barnaamijka Demo, Fadlan ku dheji soo-dhawraha USB kombiyuutarka,
Hubso in kontaroolada fog laga helo ay leedahay awood ku filan, Riix oo hay badhanka korantada illaa t
urn, ka dibna isticmaal;
Marka batoon kasta oo ku taal kantaroolka fog ay cadaadinayso, Demo tijaabada tijaabada ah ayaa soo bandhigi doona
Qiimaha muhiimka ah ee u dhigma. Ka dib markii la sii daayo, Muujinta qiimaha ugu muhiimsan ayaa baaba'ay,
taas oo muujineysa in kaydka furaha uu caadi yahay;
Waxa kale oo aad ka dooran kartaa nambarka nalka lambarada ah ee ku saabsan barnaamijka 'Trotware', Guji Download,
iyo lambarka iftiinka u dhigma ee ku yaal kantaroolka fog ayaa iftiimi doona, taas oo muujineysa in
LED light is downloading normally.

9.Dhibaatooyinka wax soo saarka

10. Dayactirka iyo Daryeelka

1. Fadlan ugu isticmaal jawi qalalan oo leh heerkul caadi ah iyo cadaadis si aad u dheereeyso
nolosha adeegga;
2. Ha u isticmaalin walxaha fiiqan si aad u taabtaan aagga muhiimka ah si aad u kordhiso nolosha adeegga furaha;
3. Fadlan ku hay aagga furaha nadiifi si aad u dhinto xirashada furaha;
4. Ka fogow tuujinta oo ku dhaca inaad waxyeello u geysato kontoroolka fog;
5. Haddii aan la isticmaalin muddo dheer, Fadlan ka saar batteriga oo kaydi kontoroolka fog
iyo batteriga meel nadiif ah oo aamin ah;
6. Pay attention to moisture-proof during storage and transportation.

11.Macluumaadka badbaadada

1. Fadlan u aqri tilmaamaha si taxaddar leh kahor intaadan isticmaalin. Aan-xirfadleyda ka mamnuuc ah
operating.
2. Fadlan isticmaal xarkaha asalka ah ama xamuul soo saar soo-saare caadi ah oo leh
same specifications.
3. Fadlan ku dallac waqtiga si aad uga fogaato qalliin qaldan sabab u ah awood aan ku filnayn oo sababaya
remote control to be unresponsive.
4. Haddii loo baahdo hagaajinta, Fadlan la xiriir soo-saaraha. Haddii waxyeelada ay ka dhasheen is-dayactir,
the manufacturer will not provide warranty.