Xakamaynta fog ee goynta si otomaatig ah ee gaariga xargaha xargaha ayaa ku habboon nooca xarkaha
Mashiinnada goynta. Waxay isticmaashaa 485 Modbus RTU Protocol si loo xakameeyo inta jeer ee bidix iyo midig ee midig
beddelaya, iyo sidoo kale isbedelka guud ee is-beddelka jirka ee xawaaraha xasaasiga ah iyo hore, gadaal socon,
Bidix iyo Jihada Jihada Xakameeyayaasha. Oo waxay aqrin kartaa shaqada hadda jirta ee soo noqnoqda gawaarida waaweyn
DIIWAAN GELINTA 485 Modbus RTU Protocol. Adoo falanqaynnaya oo isbarbar dhigaya hadda
matoor weyn, Xawaaraha wadooyinka bidix iyo midig ee midig ayaa si otomaatig ah loogu hagaajin karaa waqtiga dhabta ah
achieve automatic cutting function.

2. Astaamaha waxqabadka badeecada

1. Qaadashada 433mhz Wireless Wireless-ka Wireless, Iyada oo masaafo toos ah oo hawl-gal ah 100 meters.
2. Qaado howlo soo noqnoqda oo toos ah oo la istcimaalo 32 Qeexda uruurinta Xakamaynta Wireless
isku mar, without affecting each other.
3. Waxay taageertaa dhammaan dadka ku-beddelashada inta jeer ee ku-beddelashada 485 Modbus RTU Protocol, Hadana soo noqnoqoshada iswaafajinta
Noocyada Beddelka Ku-darista:Shanghai Xilliyin, Fuji, Hucheaan, Zhongchen, Booqasho, iyo . Noocyada noocyada
taasi ma ahan mid iswaafaqsan, please contact us for customization.
4. Taageer Xawaaraha xawaaraha, bilaabidda, and current reading of large motor frequency converters.
5. Taageerada bidix iyo midig ee Track Track Traintreter Shuruudaha xawaaraha, bilaabidda, ee hore, xagga gadaale, left and right control.
6. Taageer sixitaanka toosan ee bidix iyo tareenka saxda ah ee ku-beddelashada korantada si ay u hayaan mashiinka ku dhex socda a
straight line.
7. Taageer shaqada goynta otomaatiga ah ee xargaha, si otomaatig ah ula qabsiga xawaaraha bidix iyo midig ee midig ee
real time according to the current information of the large motor.
8. Waxay sidoo kale la jaan qaadayaan xakameynta wax soo saarka io ee IO ee bilowga gawaarida oo joogsiga, iyo wax soo saarka korantada analojka
control for motor speed.

3. Faahfaahinta alaabada

4. Hordhac Shaqada Wax soo saarka

Qoraalada:
①ccreen muuqaal:

②mode wareejinta:

Laleble:
Badhamada isku darka, Hawlgallada qaarkood waxay u baahan yihiin inay qabaan badhanka suurtogalka ah ee hawlgalka,see the instructions for each switch for details.
④Lage Wareega gawaarida:
Adoo adeegsanaya deret rett 3-xawaare, Jiidashada Wareeggan wuxuu xakameyn karaa wareejinta hore iyo wareejinta dhaqdhaqaaqa weyn. Ka dib markii la sii daayo, Gobolku wuu sii jiri doonaa, oo shaashadda waxaa jiri doona bandhigyo u dhigma shaashadda. ARADKA S1 ↑ wuxuu muujinayaa wareejinta hore, and the S1 ↓ arrow indicates everse rotation.
⑤SMALL MORDION WARK / BILAASH FARSAMADA:
Gawaarida yaryar waxaa lagu qalabeeyaa isku-xirnaan 3-xawaare is-xirid oo horteeda hortiisa ah. Riixida batoonka ku habboon oo jiidaya Wareejintan waxay xakameyn kartaa matoorka yar si uu horay ugu socdo iyo gadaal, iyo soo bandhigida u dhigma ayaa ka soo muuqan doonta shaashadda., and the ↓↓ arrow represents backward.
Aspiceel toosan:
Adoo adeegsanaya gogo 'turjumaad badan, Riix badhanka suuragalka ah, U leexo garabka midig, oo soo bandhigaan sixitaanka khadka toosan: DF: Bidix bidix ayaa kordha 1 cutubkiiba wareeg kasta, iyo bidix
Xawaaraha dhaqdhaqaaqa ayaa kordhaya 0.1 cutub; Bidix u leexo, Soo bandhigida sixitaanka toosan: DF: Dhanka midig, Wakhti kasta oo ku dhaca garaaca 1 cutub, iyo xawaaraha matoorka saxda ah ee kordha
ag 0.1 unit.
⑦small gawaarida wareejinta:
Adoo adeegsanaya deret rett 3-xawaare, markii gacanta lagu maareeyo, Gawaarida yar-yar waxaa lagu xakamayn karaa bidix ama midig. Mar la sii daayo, Xakamaynta fog ayaa si otomaatig ah u joojin doonta ficilkan. Ee gobolka hore, Markuu damintan la beddelo, Soo bandhigida u dhigma ayaa ka soo muuqan doonta shaashadda. Fallaaca ↑ ↑ wuxuu muujinayaa bidix, iyo → fallaadhaha ayaa u muuqda leexashada midig., U leexo beddelkan oo soo bandhigida u dhigma ayaa ka muuqan doonta shaashadda. Fallaaca ↓ ↓ wuxuu muujinayaa bidix, and the ↓→ arrow indicates right turn.
⑧ Xeerka xawaaraha gawaarida waaweyn:
Adoo adeegsanaya gogo 'turjumaad badan, wareejin 1 Grid wakhti kasta, qiimaha xawaaraha ee isbeddelka gawaarida waaweyn illaa qiyaastii 0.2 cutuboodo. Fast rotation can quickly modify the speed value of the large motor.
⑨ Xeerka xawaaraha yar ee dhaqdhaqaaqa:
Adoo adeegsanaya gogo 'turjumaad badan, Habka gacanta, Riix badhanka suurtogal ah ka dibna u wareeji hal grid markiiba，qiimaha xawaaraha ee bidix iyo midigta yar-yar ayaa isbedelaya 0.1 cutuboodo, iyo wareegga deg-degga ah ayaa si dhakhso ah wax uga beddeli kara qiimaha xawaaraha ee motot.in ee habka tooska ah, Riix badhanka suurto gal ah una wareeji hal grid markiiba,Xadka xawaaraha xawaaraha f ee isbeddelka gawaarida yar ee qiyaastii ugu dhawaan 0.1 cutuboodo. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Beddelka korantada
The remote control display screen is turned on.

5. Jaantus Qalabka Qalabka

6. Tilmaanta Rakibaadda Waxsoosaarka Waxqabadka
6.1 Talaabooyinka rakibaadda wax soo saarka
1. Ku rakib qaataha qaataha wasiirada korantada ee salka ku haya dhabarka, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Tixraac jaantuskayaga soo-jeedinta leh oo isbarbar dhig qalabkaaga goobta. Connect the equipment to the receiver through wires.
3. Ka dib hagaajinta qaataha, Waa lagama maarmaan in lagu xidho anteenada ku qalabaysan ee leh hela-galka iyo rakibida ama ku dheji dhamaadka dibedda ee anteenada ka baxsan golaha wasiirada korantada. Waxaa lagu talinayaa in lagu dhigo dusha sare ee golaha wasiirada korantada ee saameynta calaamadda ugu fiican. Waa reebban tahay in laga tago anteenka aan qarsooneyn ama ku dhex dhig gudaha golaha wasiirada korantada, as it may cause the signal to be unusable.
4. Ugu dhambayntii, Ku rakib batteriga kontoroolka fog, adkee daboolka batteriga, oo shid beddelka korantada ee kontoroolka fog. Ka dib markii shaashadda soo bandhiga ee kantaroolka fog ka dib uu muujiyo kan caadiga ah
Interface-ka shaqada, remote control operations can be performed.

6.2 Cabirrada rakibaadda qaataha

6.3 Qiyaasta tixraaca ee qaataha

7. Tilmaamaha Howlgalka Wax Soo Saarka
7.1 Dejinta Xakamaynta Xakamaynta Xakamaynta
Habka loo galo xargaha kantaroolka fog ee kantaroolka:

U leexo habka loo beddelo qaabka gacanta, hagaaji xawaaraha matoorka yar ilaa 25 labada dhinacba, ama 0, 10, 20, 40, 50 dhinacyada oo dhan, oo si isdaba joog ah u rogaya wareejinta hore ee gawaarida waaweyn 3 jeer iyo hoos 3 jeer;
Adeegso “Xakamaynta xawaaraha dhaqdhaqaaqa yar” Ku garaac bogagga, Riix badhanka suuragalka ah, ka dibna u roga gawaarida xawaaraha xawaaraha xawaaraha si aad wax uga beddesho xuduudaha. Ka dib wax ka beddelidda ka dib, Bogga u wareeji dhamaadka,doorasho “Badbaadin” si looga baxo, oo riix badhanka suurtogalka si aad uga baxdid liiska;
Xaruntu waa sida soo socota:
Ugu badnaan: Jawaabcelinta jawaab celinta ee hadda jirta, Deji llaahay 15-200a, fulin la'aan 100;
Xaraashka Xakamaynta Xawaaraha: Qaabka otomatiga ah, Gawaarida yaryar si otomaatig ah ayey u dardar gashay dhaqso ama gaabis,si dhakhso ah, Deji Range 200-1500, fulin la'aan 800;
Xadgudubka khiyaanada: Deji xadka sare ee u oggolaanaya xawaaraha dhaqdhaqaaqa inuu beddelo. Marka isbeddelada hadda jira ee ka baxsan qiimahaan, khiyaano ayaa dhici doonta. Kuwa yar, si dhakhso ah khiyaanada bidix ee bidix iyo midigta, oo leh tiro 05-12 iyo asalka ah ee 06;
Dardargelinta a1: Xawaaraha weyn ee xawaaraha, si dhakhso ah ayey u kordhisaa, oo leh tiro 00-06 iyo asalka ah ee 01;
Khiyaano A2: Xawaaraha weyn ee xawaaraha, si dhakhso ah ayaa loo yaraadaa, oo leh tiro 00-06 iyo asalka ah ee 02;
Awood u yeelo qaanuunka xawaaraha: Sharciga xawaaraha xawaaraha yar ma u baahan yahay in la eego? 00 ma awoodo, 01 suuro gelin, asalka waa 01;
Bilow is-quful: Gawaarida weyn ayaa si otomaatig ah u ilaaliyaa is-qufulka ka dib marka la soo celiyo wareejinta hore iyo dib-u-celinta? 00 ma haysto, 01 hayaa, default 01
Socodka ugu badan: Xawaaraha ugu badan ee bidix iyo midigta, seere daaq 10-100, fulin la'aan 50;
Joojinta hada: Qaadashada ugu badan, lagu soo bandhigay shaashadda sida qiimaha IC, seere daaq 15-160, default 30,
u dhigma IC: 30 lagu soo bandhigay shaashadda. Xadka sare ee xuduudan waa 80% ugu badnaan hadda;
Xadka xawaaraha caadiga ah: Xaraashka yar ee caadiga ah ee goynta ah ee xawaaraha goynta marka la shido waa inta u dhexeysa 0-100, oo leh mid aan caadi ahayn 10. Shaashadda shaashadda F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Qaabka otomatiga ah: Loo dejiyaa 00, Beddelka otomaatiga ah / Buug-gacmeedka ayaa ah beddel qaab. Loo dejiyaa 01, Wareegtada otomatiga ah / Buug-gacmeedka ayaa loo dejiyey booska tooska ah, shaashadda shaashadda ayaa muujineysa iftiin, iyo wax soo saarka Terminalka otomatiga ah ee qaataha ayaa xiran. Marka loo dejiyo buugga, Terminalka soo-saarista otomatiga ah waa la gooyaa;
Xaddidaadda xawaaraha: Xadka sare ee xawaaraha goynta otomaatiga ah ee dhaqdhaqaaqa yar ee dhaqdhaqaaqa 00 si 200, oo leh mid aan caadi ahayn 60 iyo soo bandhigid u dhigma 6.0 shaashadda; Xadka sare ee qiimaha muujinta = xawaaraha xadka xaddiga x 0.1;
Martida ugu badan: xawaaraha ugu badan ee matoorka weyn, seere daaq 10-100, fulin la'aan 50;
Qalabka MBUs (waajib ah): Xulashada moodalka ugu badan ee beddelka ah, seere daaq 00-03, fulin la'aan 03;
00- Shanghai Xilin 01-fuji
02-Rectt 03-higovence (zhongchen), Robicon)
Qalabka SBUS (waajib ah): XUQUUQDA MADAXWEYNAHA MADAXWEYNAHA, seere daaq 00-05, fulin la'aan 03;

00- Shanghai Xilin 01-fuji
02-Rectt 03-higovence (zhongchen), Robicon)

04-Anguaha 05-Ma Jiro

7.2 Dejinta guud ee isu-beddelka soo noqnoqda
1. Taliska xulashada isha: Kanaalka Taliska Isgaarsiinta
2. Xulashada isha ugu weyn ee xulashada: Isgaarsiinta la siiyay
3. Sicirka bauth: 19200
4. Qaabka Xogta: Wax cadeyn ah, Qaabka Xogta<8-N-1>
5. Cinwaanka Maxalliga ah: Deji beddelka bidix ee bidix 1, Ku-wareejinta ugu badan ee ugu badan 2, iyo
the large motor frequency converter to 3
7.3 Tilmaamaha Hawlgallada Xakamaynta ee fog
1. Awoodda mashiinka, dami koontaroolka fog, Gali dib-u-celinta kontoroolka fog, dhigay
Xaraashka fog ee kantaroolka, inta badan dejinta dhaqdhaqaaqa yar iyo jihada waaweyn
Moodooyinka beddelka: (Ka gudub talaabadan haddii wax soo saare mashiinka uu horey u dhigay);
2. U deji cabbirrada isugeynta soo noqnoqda (Ka gudub talaabadan haddii wax soo saarkii mashiinka
ayaa horay u dhigay);
3. U dejiso xanta fog ee hantanka gacanta, ka dibna u adeegso kontoroolka fog si aad ugu dhaqaaqdid mashiinka
booska shaqada;
4. Habka gacanta, U dejiso hadda goynta matoorka weyn ilaa IC iyo xawaaraha matoorka weyn
5. U beddelo qaab toos ah oo deji xawaaraha xadka goynta ah F Qiimee F Qiimaha matoorka yar;
6. Qaabka otomatiga ah, u rogo dhaqdhaqaaqa weyn si aad ugu gudbiso si aad u bilowdo matoorka weyn, Kadib leexo
Gawaarida yar ee loo gudbiyo ama gadaal loo maro, oo kantaroolku wuxuu galay goynta si otomaatig ah
mode to start cutting.

8.Dhibaatooyinka wax soo saarka

9.Dayac-tir
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Haddii aan la isticmaalin muddo dheer, Fadlan ka saar batteriga oo ku keydi koontaroolka fog iyo batteriga nadiif ah
and safe place.
6.Inta lagu gudajiro kaydinta iyo gaadiidka, attention should be paid to moisture and shock resistance.

10. Macluumaadka badbaadada
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Fadlan ku beddel batteriga hab waqti ku habboon marka batteriga aad u yar tahay in laga fogaado khaladaadka ay sababaan
awood aan ku filnayn, which may result in the remote control being unable to operate.
3. Haddii loo baahdo hagaajinta, Fadlan la xiriir soo-saaraha. Haddii waxyeelada ay ka dhasheen is-hagaajinta, soo saaraha
will not provide warranty.

Nooc: DH01R-4W-26K

Qalabka lagu dabaqi karo:various industrial equipment

2.Jaantusyada Qalabka Alaabada

Qorid: Waad dooran kartaa mid ka mid ah saddexda anteenooyinka. The suction cup antenna is standard by default.

3.Product model description

Qorid:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.

②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, oo leh tiro 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.

④Analog input, ranging from 1 si 2, indicating that there are 1 si 2 Waxyaabaha loo yaqaan 'analog'(maximum 2 kanaalada); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, iwm.) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Astaamaha

1）Maximum 26 Dib-u-soo-celinta Relay;
2）Maximum 4 kanaalada analog 0-10v wax soo saarka (Range Range waa la dhisan karaa): Taageero 2 kanaalada wax soo saarka sare ee qurxinta ee go'doonka ah;
3）2 analog inputs; oo lagu soo bandhigay koontaroolka fog, Baaxadda soo bandhigga waa la habeyn karaa
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 AA Beytbaaraha, low power consumption design;
6） Wireless operation distance is 200 mitir;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.

5.Sharaxaad kanta kontoroolka meel fog

6.Display content introduction

W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)

Koronto hoose: Batteriga kantaroolka fog fog aad buu u yar yahay, please replace the battery.

Shabakad ayaa dhacday: Saxeex wireless ah ayaa la joojiyay. Fadlan hubi awoodda qaataha, Awoodda mar labaad, and restart the remote control.

7.Tilmaamaha Howlgalka Ka Hortagga Meel fog

1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, dami beddelka korantada, and the display shows a value,Muujinaya bilowga guusha. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
When the emergency stop button is pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Qaar ka mid ah howlaha kantaroolka fog ayaa lagu hagaajin karaa iyada oo loo marayo cabirrada. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Ka bax liiska xuduudaha: dooro inaad keydiso ama aadan badbaadin, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 si 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 si 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 si 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 to 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;

8.Ka hortagga astaamaha korantada

9.Cabirka xakamaynta fog

The final interpretation right of this product belongs only to our company.

Nooc: DH12S-P6S

Qalabka lagu dabaqi karo:wire saw/blade saw machine

2.Jaantusyada Qalabka Alaabada

Qorid: Waad dooran kartaa mid ka mid ah saddexda anteenooyinka. The suction cup antenna is standard by default.

3.Sharaxaad kanta kontoroolka meel fog

4.Soo bandhigida horudhaca

Main motor speed: Main: 0-50
Traveling motor speed: Line: 0-50
Maximum speed limit of automatic cutting traveling motor: Speed: 0-30
(cabirrada la isku hagaajin karo)
Automatic cutting main motor setting current: Setting: 28 (cabirrada la isku hagaajin karo)
Swing arm motor speed: Swing: 0-50

Koronto hoose: Batteriga kantaroolka fog fog aad buu u yar yahay, please replace the battery.

Shabakad ayaa dhacday: Saxeex wireless ah ayaa la joojiyay. Fadlan hubi awoodda qaataha, Awoodda mar labaad, and restart the remote control.

5.Tilmaamaha Howlgalka Ka Hortagga Meel fog

1）Turn on the remote control

When the receiver is powered on, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; install two AA batteries in the remote control, dami beddelka korantada, and the display will show the motor speed, indicating successful startup.

2）Large motor and speed regulation/Main motor and speed regulation

Press and hold “Speed Regulation Enable”, dami “Hore / gadaal” U dhaqaaq dhanka hore, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, dami “Hore / gadaal” U dhaqaaq si aad u noqoto, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;U wareeji “big motor” knob to adjust the speed regulation voltage of the receiver’s main motor inverter to 0-10V;

3）Traveling motor

Press and hold “Speed Adjustment Enable”, dami “Hore / gadaal” switch to forward or backward, and the walking motor will move at a high speed of 50;

4）Swing arm motor and speed regulation

Dami “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;

Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” switch, the swing arm motor will move at a high speed of 50;

5）Travel motor speed limit adjustment

Riix oo hay “speed adjustment enable” badhanka oo wareeji “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “hore / gadaal” switch forward or backward to enter the automatic cutting mode;

7） Parameter menu (Isticmaalayaasha waa ka mamnuuc inay wax ka beddelaan iyada oo aan fasax laga helin)

Enter the parameter menu:Habka gacanta, when the main motor speed is 0, riix dhinaca hore ee hore / gadaal u roga saddex jeer oo isku xigta, and then push it down three times in a row to enterthe parameter menu;
Ka bax liiska xuduudaha: Turn the speed adjustment knob, select save or not save, and press the enable button to confirm;
Rated current: The maximum value of the main motor current, unit Ampere;
Speed adjustment parameters: Automatic cutting control parameters, fulin la'aan 800, unit milli second,Wax ka badalida waa mamnuuc;
Xadgudubka khiyaanada: Markii qiimaha isbedelka ee hadda la jaro uu ka badan yahay qiimahan, rapid deceleration begins, unit Ampere;
Dardargelinta a1: When the cutting current is lower than the set cutting current, the speed value increased by each acceleration of the walking motor;
Khiyaano A2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, Wax ka badalida waa mamnuuc;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, Wax ka badalida waa mamnuuc;
Ugu badnaan: The range of main motor feedback current, unit Ampere;
Martida ugu badan: Remote control main motor speed adjustment display range;
Socodka ugu badan: Invalid parameter;
Xadidda xawaaraha: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Add and subtract the offset increment of the sensitivity parameter;
Set current: Goynta otomaatigga ah, the threshold of main motor feedback current. If this value is exceeded,the walking motor starts to decelerate;Below this value, the walking motor starts to accelerate;cutub: Ampere;
Idling exit: When the automatic mode starts, if the main motor feedback current is less than this value,it will be in the idling mode.If it is greaterthan this value, it will exit the idling mode and enter the cutting mode.Unit is ampere;
No-load current:When automatic mode starts, if the main motor feedback current is less than this value,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;otherwise, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;

6.Ka hortagga astaamaha korantada

7.Cabirka xakamaynta fog

The final interpretation right of this product belongs only to our company.

Nooc: Dh12s-ld

Qalabka lagu dabaqi karo:Mashiinka 'crawler'

Jaantusyada Qalabka Alaabada

Qorid: Waad dooran kartaa mid ka mid ah saddexda anteenooyinka. The suction cup antenna is standard by default.

Sharaxaad kanta kontoroolka meel fog

Soo bandhigida horudhaca

Xawaare weyn：S1：0-50
Xawaaraha gawaarida yar: S2: 0-50
Ugu badnaanspilimitofanlickalmotor:F:0-30(Cayayaanka lagu kalsoonaan karo)
Goynta otomatiga ah ee ugu badan ee hadda jira: Ilko: 0-35 (cabirrada la isku hagaajin karo)
Qiimaha saxitaanka toosan: DF: -99-99 (1 Qeybta waa qiyaastii 0.02V)

Koronto hoose: Batteriga kantaroolka fog fog aad buu u yar yahay, please replace the battery.

Shabakad ayaa dhacday: Saxeex wireless ah ayaa la joojiyay. Fadlan hubi awoodda qaataha, Awoodda mar labaad, and restart the remote control.

Tilmaamaha Howlgalka Ka Hortagga Meel fog

1.Dami koontaroolka fog

Markuu ku guuleysto, Iftiinka rf-ka ee loo yaqaan 'RF' ee soo-dhoweeyuhu wuxuu ku bilaabmayaa Flash;Ku rakib laba baytari oo AA ah oo ku jira kontoroolka fog, dami beddelka korantada, Muuqaalka ayaa tusi doona xawaaraha dhaqdhaqaaqa, indicating successful startup.

2.Xeerka gawaarida waaweyn iyo xawaaraha

Dami “hore / gadaal” U dhaqaaq dhanka hore, Gawaarida weyn ee qaataha ayaa shidmaya, Oo shaashadu waxay muujin doontaa horay

Dami “hore / gadaal” U dhaqaaq si aad u noqoto, Mootada weyn ee qaataha qaataha ayaa gadaal u rogi doona, Muuqaalkuna wuxuu muujinayaa gadaal

U wareeji “hagaajinta xawaaraha xawaaraha” Knob si uu ula qabsado soo-saarka qaataha xawaaraha xawaaraha ee xawaaraha sare ee korantada 0-10v;

3.Xeerka gawaarida yar iyo xawaaraha

Dhaqaaq “hore / gadaal” U dhaqaaq dhanka hore, Guryaha bidix ee bidix iyo giraangiraha midig ee hore ee loo maro qaataha ayaa la shiday, Oo shaashaduna waxay muujineysaa horay

Dami “Hore / gadaal” U dhaqaaq si aad u noqoto, Dhanka bidix ee bidix iyo midig ee midig ee giraangiraha qaataha, Oo shaashadu waxay muujineysaa dib u soo celinta

4.Bidix u leexo iyo midig

Dami “Bidix / midig” U dhaqaaq bidix, giraangiraha midig ee qaataha ayaa gudbin doona oo dami doona,Muuqaalka ayaa tusi doona bidix

Dami “bidix u leexo / midig” u beddelo si aad u leexato midig, Garifoonka bidix ee qaataha ayaa gudbin doona oo dami doona, Muuqaalkuna wuxuu muujinayaa dhanka midig

5.Meel dhig meesha

Habka gacanta:
Bidix u leexo meesha: Riix oo hay “Karsiin” guluus, dami “Bidix / midig” U dhaqaaq bidix, Gargaarka bidix gadaal gadaal iyo midig giraangiraha midig ee loo maro qaataha ayaa la shiday,oo bilaw dhanka bidix ee meesha;

Midig u leexo meesha: Riix oo hay “Karsiin” guluus, dami “Bidix / midig” U beddelo midig, Gargaarka bidix ee bidix iyo bidix midig ee giraangiraha ee qaataha ayaa la shiday, Qaadistaha ayaa bilaabaya inuu u rogo dhanka midig;

6.Xawaaraha xawaaraha gawaarida yar

Qaabka otomatiga ah: Riix oo hay “Karsiin” badhanka oo wareeji “Hagaajinta xawaaraha xawaaraha” Si loo hagaajiyo xawaaraha ugu badan ee dhaqdhaqaaqa yar inta lagu gudajiro goynta otomatiga ah;

7.Goynta otomaatigga ah

Tallaabada koowaad waa in la bilaabo matoorka weyn; Tallaabada labaad waa in loo beddelo habka loo beddelo “Dhaqdhaqaaq”; Tallaabada saddexaad waa in la bilaabo gawaarida yar yar oo shaashadda ayaa soo bandhigi doonta “Goynta auto”,taas oo muujineysa inay gashay qaabka goynta otomatiga ah;

8. Xadhiga toosan ee toosan

Marka matoorrada bidix iyo midig ee lugaynta ay horay u socdaan gadaal iyo gadaal, Xawaaraha bidix iyo midig waa iswaafaqla'aan, iyo socod toosan oo toosan. Waxaad u adeegsan kartaa shaqada sixitaanka toosan ee xakameynta fog ee xasaasiga ah xawaaraha-bidix ee giraangiraha bidix iyo midig;
Mabda'a sixitaan: Iyada oo loo marayo shaqada sixitaanka, Xawaaraha giraangiraha bidix ee bidix ayaa ganaax ah si loo gaaro isla xawaaraha giraangiraha midig, si loo kormeero xawaaraha giraangiraha bidix iyo midig iyo baabi'inta qalloocinta;
Qaabka hawlgalka sixitaanka: Habka gacanta, Riix oo hay “Karsiin” badhanka oo wareeji “Xeerka xawaaraha yar ee dhaqdhaqaaqa”;
U wareeji saacad kale si aad u kordhiso korantada jihada bidix iyo qiimaha sixitaanka ee shaashadda shaashadda ayaa kordhin doonta;
U wareeji dhanka isbadalka si aad u yareyso korantada jihada bidix iyo qiimaha sixitaanka ee muujinta si loo yareeyo;
Kala duwanaanta sixitaanka: Qiimaha sixitaanka -90 si 90; Korontada Asluubta ee hal unug oo sixitaan ah waa qiyaastii 0.02V;

9. Member menu (Isticmaalayaasha waa ka mamnuuc inay wax ka beddelaan iyada oo aan fasax laga helin)

Qaar ka mid ah howlaha kantaroolka fog ayaa lagu hagaajin karaa iyada oo loo marayo cabirrada. Habka gacanta, Marka xawaaraha dhaqdhaqaaqa yar ee S2 uu yahay 10, riix dhinaca hore ee hore / gadaal u roga saddex jeer oo isku xigta, ka dibna riix saddex jeer oo isku xigta si aad u gasho menu;
Ka bax liiska xuduudaha: dooro inaad keydiso ama aadan badbaadin, ka dib riix badhanka suurtogalka si aad u xaqiijiso bixitaanka;
Ugu badnaan: Howlgalka ayaa lagu qiimeeyay hadda ee matoorka goynta ah 80% ee tan hadda jirta;
Xaraashka Xakamaynta Xawaaraha: Xargaha xakamaynta si otomaatig ah, fulin la'aan 800, Wax ka badalida waa mamnuuc;
Xadgudubka khiyaanada: Xadgudubka Xakamaynta Si otomaatig ah. Markii qiimaha isbedelka ee hadda la jaro uu ka badan yahay qiimahan,deceleration begins.
Dardargelinta a1: Xadgudubka Xakamaynta Si otomaatig ah, Markuu goynta hadda ka hooseeyo midka la goynayo hadda, xawaaraha dardargelinta;
Khiyaano A2: Xadgudubka Xakamaynta Si otomaatig ah, Markuu goynta hadda ka sarreeyo
Joojinta hada, Xawaaraha khiyaanada;
Dib-u-eegida mindida tooska ah: aan la isticmaali karin;
Bilow is-quful: 0, is-quful la'aan; 1, is-xirid. Riix furaha kartida leh + forward and reverse to take effect and self-lock.
Socodka ugu badan: the maximum speed of the small motor.
Joojinta hada: U deji wax ugu badan ee waqtiga ugu weyn ee goynta si otomaatig ah. Haddii jawaab celintu ay hadda ka badan tahay qiimahan, it will start to decelerate.
Xadka xawaaraha caadiga ah: the default maximum speed of automatic cutting speed when turning on the machine.
Qaabka otomatiga ah: 0, Beddelka otomaatiga ah si otomaatig ah ayaa loo xakameeyaa; 1, the automatic switch controls the automatic IO output point.
Xadidda xawaaraha: the maximum speed of the small motor during automatic cutting.
Martida ugu badan: maximum speed of large motor.

Ka hortagga astaamaha korantada

Cabirka xakamaynta fog

The final interpretation right of this product belongs only to our company.