1. Hordhaca Waxsoosaarka

Qalabka dhiiga ee gacanta ku shaqeeya	Dc24v / 1a
Korantada saadka soo-saarka	Dc24v / 1a
Soo-saarkii soo-saarista io soo saarista io	Dc24v
Dhererka xarkaha gacanta ee gacanta	10m
Dhererka Xabsiga Wanaagsan	1m
Dhererka Xirmooyinka Xiriirka Qaranka	3m
Heerkulka qalliinka	-25℃<X<55℃
Dhererka ka hortagga dayrta	1m
Tirada batoonka caadiga ah	6
Cabbirada Wax soo saarka	233*90.7*77.4(Mm)

4.Hordhac Shaqada Wax soo saarka

Qorid:

Badhanka joogsiga degdegga ah:

Riix batoonka joogtada ah ee joogsiga, iyo labada qaybood ee joojinta io ee soo-saarista io ee soo-bixiyaha la gooyo, and all functions of the handwheel will be invalid.

Ka dib markii la sii daayo joojinta degdegga ah, Soosaarista xaaladaha degdegga ah ee io ee soo-saarkii qaataha ayaa xiran, and all functions of the handwheel are restored.

② shaashadda shaashadda:

6.2 Cabirrada rakibaadda qaataha

6.3 Cabirka rakibaadda ee ku-xidhka duulista

6.4 Qiyaasta tixraaca ee qaataha
7.Tilmaamaha Howlgalka Wax Soo Saarka

1. Markuu qaataha qaataarka lagu xoojinayo iyo tilmaamayaasha shaqada ee iftiinka soo-jeedinta qaataha, Ku xir aqbalaha kombiyuutarka kumbuyuutarka shabakadda, U deji cinwaanka IP-ga go'an ee kumbuyuutarka, oo u adeegso barnaamijyada Qalabka Qaabeynta Shabakadda si loo dejiyo cabirrada shabakadda ee shaqada gacanta. Qaababka dejinta gaarka ah, Tixraac “LXWGP-ETS Weelka gacanta ee gacanta lagu sameeyo”.

2.Ka dib markii qaataha la dejiyo, Nidaamku wuxuu u baahan yahay inuu u shaqeeyo barnaamijka PLC. Fadlan tixraac “LXWGP-ETS Feejignaanta Nidaamka Xakamaynta Nidaamka ee Nidaamka Xakamaynta Nidaamka” and PLC program routine materials for details.

3.Kadib markay dhammeeyaan goobaha kor ku xusan, Qaado qaataha qaacista armaajo ee mashiinka kolaysiiyada oo rakib. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.Kadib markay dhammeeyaan goobaha kor ku xusan, Qaado qaataha qaacista armaajo ee mashiinka kolaysiiyada oo rakib. Ka soo qaad fiilada shabakadda kombiyuutarka kumbuyuutarka oo ku xir meesha x ee nidaamka. Connect the receiver power supply and pulse line.

5. Xulo xulashada xulashada: Switch the axis selection switch and select the axis you want to operate on.

6. Xulo isweydaarsiga: Switch the magnification switch and select the magnification level you need.

7. Dhaqaajinta dhidibka: Riix oo hay badhanka suuxinta, Xulo Suuxinta xulashada xulashada, Xulo Wareegtada weyn, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.

8. Riix oo qabo wax kasta oo caadada ah si aad ugu shiddo wax soo saarka IO ee badhanka u dhigma ee qaataha, and release the button to turn off the output.

9. Riix batoonka joogtada ah ee joogsiga, Soo-saarkii joogtada ah ee IO ee loo soo bandhigo IO ee qaataha qaataha ayaa la kala goyn doonaa, Shaqada gacanta ayaa naafo noqonaysa, sii daa batoonka joogsiga degdegga ah, Soosaarista joogtada ah ee IO waa la xiri doonaa, and the handwheel function will be restored.

8.Sharraxaadda Moodeelka Qaabka

9.Toogashada Dhibaatada Dhibaatada

1.Hordhaca Waxsoosaarka

2. Astaamaha waxqabadka badeecada

3. Faahfaahinta alaabada

Korantada shaqaynaysa iyo hadda ee fogaanta wireless-ka	3V/14MA
Tilmaamaha baytariyada	2 AA baytariyada alkaline, size 5
Heerarka alaarmiga korantada hoose ee fogaanta wireless	< 2.3V
Korantada saadka soo-saarka	DC5V-24V/A
Joogsiga degdegga ah ee soo-saarka baaxadda culeyska	AC125V-1A/DC30V-2A
Qaaduhu waxa uu awood u yeeshaa baaxadda culeyska wax soo saarka	AC125V-1A/DC30V-2A
Soosaarka badhanka gaarka ah ee soosaarka kala duwanaanshaha	DC24V/50mA
Cabbirka soosaarka xulashada dhidibka qaataha	DC24V/50mA
baaxadda culeyska soosaarka weyneynta qaataha	DC24V/50mA
Awood gudbinta ee terminalka gacanta	15dBm
Qaataha helaya dareenka	-100dBm
Inta jeer ee isgaarsiinta wireless	433band soo noqnoqda MHz
Fogaanta isgaarsiin la'aanta	Caqabada fogaanta xorta ah ee 40 mitir
heerkulka hawlgalka	-25℃ < X < 55℃
Dhererka dhicista lidka ku ah	1 (halbeeg dherer)
Tirada badhanka gaarka ah	2

4. Hordhac Shaqada Wax soo saarka

Qoraalada:

① Codka garaaca garaaca:
Riix oo hay badhanka suuxinta, rux garaaca garaaca wadnaha, soo saar calaamadaha garaaca wadnaha,and control the movement ofthe machine axis.
② Daar badhanka:
Taabo batoonka karti labada dhinacba, iyo labada qaybood ee awood wax soo saarka IO ee qaataha ayaa qaban doona. Sii daa badhanka karti-gelinta si aad u kala saarto wax-soo-saarka IO-ga; Iyo ka hor inta aadan bedelin weyneynta xulashada dhidibka iyo ruxitaanka giraangiraha gacanta,badhanka karti wuxuu u baahan yahay in hoos loo dhigo si uu waxtar u yeesho; This function can be cancelled through configuration software.

③ Tilmaamaha nalalka:
iftiinka dhinaca bidix: xoogga iftiinka,wheel, nalkanina wuu shidaa marka uu korontadu shido;
Iftiin dhexe: nalka signalka ifaya marka uu shaqaynayo hawl kasta oo giraangiraha gacanta ah, oo aan iftiimin marka aan la qallin;
Iftiin dhinaca midig: Nalka alaarmiga alaarmiga tamarta hooseeya, heerka batteriga hooseeya,Tani way iftiimaysaa ama way shidaysaa, battery needs to be replaced.

④ Badhanka joogsiga degdega ah:
Riix batoonka joogtada ah ee joogsiga, iyo labada qaybood ee joojinta io ee soo-saarista io ee soo-bixiyaha la gooyo, and all functions of the handwheel will be invalid.

⑤ Dareemka weyneynta:
Riix oo hay badhanka karti-gelinta si aad u bedesho furaha weynaynta, which can switch the magnification controlled by the handwheel.

⑥ beddelka xulashada dhidibka (korontada):
Riix oo hay badhanka karti-gelinta si aad u bedesho furaha xulashada dhidibka, kaas oo bedeli kara dhidibka dhaqdhaqaaqa uu gacanta ku hayo. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ badhanka gaarka ah:
Laba badhamada gaarka ah, each corresponding to an IO output point on the receiver.

5. Jaantus Qalabka Qalabka

6. Tilmaanta Rakibaadda Waxsoosaarka Waxqabadka
6.1 Talaabooyinka rakibaadda wax soo saarka

1. Ku rakib qaataha qaataha wasiirada korantada ee salka ku haya dhabarka, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Tixraac jaantuskayaga soo-jeedinta leh oo isbarbar dhig qalabkaaga goobta. Connect the equipment to the receiver via cables.
3.Ka dib marka qaataha si fiican loo hagaajiyo, Anteenadu ku qalabaysan yahay qaataha waa in lagu xiraa, iyo cidhifka sare ee anteenada waa in lagu rakibaa ama la dhigaa meel ka baxsan golaha korantada. Waxaa lagu talinayaa in lagu dhigo dusha sare ee golaha wasiirada korantada ee saameynta calaamadda ugu fiican. Waa mamnuuc in anteenada laga tago iyada oo aan la xidhin ama la dhex dhigo golaha korantada, as this may result in the signal being unusable.
4. Ugu dhambayntii, shid daaranka taayirrada gacanta, and you can operate the machine remotely using the handwheel.

6.2 Cabirrada rakibaadda qaataha

6.3 Qiyaasta tixraaca ee qaataha

7. Tilmaamaha Howlgalka Wax Soo Saarka
1. Ku shub mishiinka iyo qaataha. Tilmaamaha shaqeeya ee qaataha ayaa iftiimaya. Ku rakib batteriga giraangiraha gacanta ee elektarooniga ah ee wireless-ka, ilaali daboolka batteriga, iyo
shid daaran koronto ee giraangiraha gacanta ee elektarooniga ah ee wireless. The handwheel’s battery level indicator light is on.
2. Dooro dhidibka isku xidhka: Riix oo hay badhanka suuxinta, beddelo beddelka xulashada dhidibka, and select the axis you want to operate.
3. Xulo isweydaarsiga: Riix oo hay badhanka suuxinta, beddelo daaran weynaynta,and select the desired magnification level.
4. Dhaqaajinta dhidibka: Riix oo hay badhanka suuxinta, Xulo Suuxinta xulashada xulashada, Xulo Wareegtada weyn, ka dibna u rog codka garaaca wadnaha. U rog dhinaca saacada si aad u dhaqaaqdo
positive axis and counterclockwise to move the negative axis.
5. Riix oo hayso badhanka caadada ah, iyo badhanka u dhigma ee soosaarka IO ee qaataha waa la daari doonaa. Sii daa badhanka, and the output will be turned off.
6. Riix batoonka joogtada ah ee joogsiga, Soo-saarkii joogtada ah ee IO ee loo soo bandhigo IO ee qaataha qaataha ayaa la kala goyn doonaa, Shaqada gacanta ayaa naafo noqonaysa,sii daa batoonka joogsiga degdegga ah, Soosaarista joogtada ah ee IO waa la xiri doonaa, and the handwheel function will be restored.
7. Haddii giraangiraha gacantu aanu shaqaynin in muddo ah, waxay si toos ah u gali doontaa qaabka hurdada si loo yareeyo isticmaalka tamarta. Marka mar kale la isticmaalo, the handwheel can be activated by pressing the enable button.
8. Haddii giraangiraha gacantu aan la isticmaalin muddo dheer, waxaa lagu talinayaa in loo beddelo shafka gacan-ku-taagga booska OFF, dami awoodda taayirrada gacanta, and extend the battery life.

8. Sharraxaadda Moodeelka Qaabka

① :ZTWGP waxay matalaysaa qaabka muuqaalka
②：Halbeegyada wax soo saarka garaaca wadnaha:
01: Waxay muujinaysaa in calaamada soo saarista garaaca wadnaha ay tahay A, B; Danab garaaca wadnaha 5V; pulse quantity 100PPR.
02：Taas oo muujinaysa in calaamadaha wax soo saarka garaaca wadnaha ay yihiin A iyo B; Danab garaaca wadnaha 12V; pulse quantity 100PPR.
03：Taas oo muujinaysa in calaamadaha wax soo saarka garaaca wadnaha ay yihiin A, B, A -, B -; Danab garaaca wadnaha 5V; pulse quantity 100PPR.
04：Waxay muujinaysaa wax soo saarka wareegga furan ee NPN oo hooseeya, oo leh calaamadaha wax soo saarka garaaca wadnaha ee A iyo B;The number of pulses is 100PPR.
05：Waxay tuseysaa wax soo saarka isha PNP oo heer sare ah, oo leh calaamadaha wax soo saarka garaaca wadnaha ee A iyo B; The number of pulses is 100PPR.
③：Matalaya tirada furayaasha xulashada dhidibka, 2 u taagan 2 axes.
④：Waxay u taagan tahay nooca calaamada beddelka xulashada dhidibka, A waxay u taagan tahay calaamada soo saarista bar-ilaa-dhibcood, and B represents encoded output signal.
⑤：Waxay u taagan tahay nooca calaamada beddelka isku dhufashada, A waxay u taagan tahay calaamada soo saarista bar-ilaa-dhibcood, and B represents encoded output signal.
⑥：Waxay ka dhigan tahay tirada badhamada gaarka ah, 2 u taagan 2 custom buttons.
⑦：Waxay u taagan tahay sahayda korontada ee nidaamka giraangiraha gacanta, iyo 05 represents 5V power supply.
⑧：L waxay u taagan tahay tiirka bidix (midi haysta bidix), R waxay u taagan tahay tiirka saxda ah (Midi haystaha midig).

9.Xalka Alaabooyinka cilladaysan

1.Hordhaca Waxsoosaarka

Qalabka gacmeedka elektaroonigga ah ee wireless-ka ah waxaa loo isticmaalaa hagida gacanta, boos u dhigasho, Qalabka Qalabka,iyo hawlgallada kale ee ku saabsan qalabka mashiinka mashiinka CNC. Alaabtaani waxay qaadanaysaa tikniyoolajiyadda gudbinta wireless, Ciribtirka isku xirka siligga ee dhaqanka, Yaraynta khaladaadka qalabka oo ay sababaan fiilooyinka, Tirtirista Faa'iidada Faa'iidooyinka ee xargaha fiilooyinka iyo saliidaha, oo hawlgal ka qabashada si ku habboon. Qaabkan ee qalabka elektaroonigga ah ee wireless-ka ah waa mid gacanta u go'an ee nidaamka loo yaqaan. Isku-duwaha Nidaamka FANUC waxaa lagu muujiyaa waqtiga-dhabta ah shaashadda gacanta ku jirta iyada oo loo marayo borotokoolka io-xiriirinta, iyo xulashada dhidibka,weynaan, iyo calaamadaha badhanka waxay si toos ah ugu xiran yihiin nidaamka iyada oo loo marayo borotokoolka io-xiriirinta, reducing wiring.

2. Astaamaha wax soo saarka
1. Kordmada 433mhz teknoolojiyadda isgaarsiinta wireless ah, masaafada hawlgalka wireless-ka ah waa 40 mitir;
2. Kordhinta shaqooyinka soo noqnoqda oo toos ah, isticmaal 32 Qeexda xaruustayaasha Wireless-ka ee isla waqtigaas oo aan is saameynin midba midka kale;
3. Taageer batoonka joogtada ah ee joojinta, Soo Saabsan IO SAXIIXA IO, ku xidhan nidaamka iyada oo loo marayo io saqaf;
4. Taageerid 4 badhamada caadiga ah, beddelo io, Calaamadda wax soo saarka ee nidaamka iyada oo loo marayo borotokoolka;
5. Taageer batoonka dhaqsaha ah + iyo badhanka -, Riix oo hay badhanka si aad ugu beddesho gacanta gacanta si aad u dhaqaajiso mashiinka;
6. Taageer 6-Axis Xakamaynta, beddelo io, Calaamadda wax soo saarka ee nidaamka iyada oo loo marayo borotokoolka;
7. Taageero 1x,10x, 100X xakameynta X . Taageero u beddelka L0 Stal, iyo wax soo saarka calaamadaha nidaamka iyada oo loo marayo borotokoolka io-xidid;
8. Taageero Awoodda Waxbarshada Badhanka, Ku xir nidaamka iyada oo loo marayo io fiilooyin, oo xakamee Tusmada u suura galka isla waqtigaas;
9. Taageer garaaca garaaca garaaca, 100 Pulses / Goobaabin, Helitaanka Nidaamka MPG Expces Interface adigoo ka soo bixinaya seenyaalaha;

3.Faahfaahinta alaabada

4.Astaamaha wax soo saarka

Qoraalada:
Badhanka Joogtada ah:
Riix batoonka joogtada ah ee joogsiga, Labada natiijooyinka ee joogtada ah ee IO ee IO ee soo-bixiyaha ah ayaa la gooyaa, Shaqooyinka gacanta oo dhan waa wax aan ansax ahayn. Joojinta degdegga ah waa la siidaayaa, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②ccreen muuqaal:

③costom badhamada:
4 badhamada caadiga ah, Badhmo kasta waxay u dhigantaa barta wax soo saarka ee IO ee qaataha, ku xidhan nidaamka ILINK. Sida-guud, the ~ button is set as a high-speed button.
Kala-sooca xulashada xulashada:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤shortcut badhamada:
Riix badhanka gaagaaban "+" si aad ugu dhaqaaqdid mashiinka hore, oo riix batoonka gaagaaban ee gaagaaban "-" si aad ugu dhaqaaqdid mashiinka si xun. This can replace turning the hand wheel to move the machine.
Badhanka aan fiicnayn:
Riix oo qabo mid ka mid ah badhamada suurto gal ah ee labada dhinacba oo rux garaaca garaaca wadnaha si aad u noqoto mid wax ku ool ah. Iyo labada koox ee karti u leh wax soo saarka io ee qaataha la soo saaray. Release the enable button and the enable IO output is disconnected.
⑦ratio beddelka:
Switching the magnification switch can switch the magnification of handwheel control.
⑧pulse encoder:
Riix oo hayso badhanka suuxinta oo rux garaaca garaaca wadnaha si aad ugu dirto garaaca wadnaha
signal to control the movement of the machine axis.
Beddelka:
Handwheel power button.

5.Jaantusyada Qalabka Alaabada

6.Tilmaanta Rakibaadda Waxsoosaarka Waxqabadka

6.1 Talaabooyinka rakibaadda wax soo saarka

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Tixraac jaantuskayaga soo-jeedinta, isbarbar dhig qalabkaaga goobta, oo ku xir
the equipment to the receiver via cables.
3. Ka dib markii qaataha la hagaajiyo, Anteenadu ku qalabaysan yahay qaataha waa in lagu xiraa,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Waxaa lagu talinayaa in lagu dhigo dusha sare ee golaha wasiirada korantada ee saameynta calaamadda ugu fiican. Waxan
waa mamnuuc in laga tago anteeno aan qarsooneyn ama anteenada ka dhex dhigto golaha wasiirada korantada,
which may cause the signal to be unusable.
4.Ugu dhambayntii, Dami korantada gacanta oo waxaad ku shaqeyn kartaa mashiinka
handwheel remote control.

6.2 Cabirrada rakibaadda qaataha

6.3 Qiyaasta tixraaca ee qaataha

7. Dayactirka iyo Daryeelka

1. Fadlan u isticmaal jawi qalalan oo leh heerkul caadi ah iyo cadaadis si aad u kordhiso
Nolosha Adeegga;
2. Fadlan iska ilaali inaad ku isticmaasho jawi aan caadi ahayn sida roobka iyo biyuhu biyuhu ku dheertaan
nolosha adeegga;
3. Fadlan ha dhigin muuqaalka kore ee gacanta ku nadiifi si aad u dheereeyso nolosha adeegga;
4. Fadlan iska ilaali tuujinta, dhicidhada, ku dhicid, itc. Si looga hortago waxyeelada qeybaha saxda ah
Gudaha gacanta gacanta ama sababa khaladaadka saxda ah;
5. Haddii aan la isticmaalin muddo dheer, Fadlan ku keydi gacanta gacanta meel nadiif ah oo aamin ah;
6. Pay attention to moisture and shock during storage and transportation.

8. Macluumaadka Amniga

1. Fadlan u aqri tilmaamaha si taxaddar leh kahor intaadan isticmaalin. Aan-xirfadleyda ka mamnuuc ah
operating.
2. Fadlan beddel batteriga waqtiga markii batteriga aad u yar tahay si looga fogaado khaladaadka ay sababaan
insufficient power causing the handwheel to be unable to operate.
3. Haddii loo baahdo hagaajinta, Fadlan la xiriir soo-saaraha. Haddii waxyeelada ay ka dhasheen is-dayactir,
the manufacturer will not provide warranty.

1.Hordhaca kontoroolka fogaanta

a.Product Comboosfikradda
Siemens-waqtiga-dhabta ah ee isku-dubbaridka gacan-ku-taagga elektarooniga ah ee wireless-ku wuxuu ka kooban yahay laba qaybood: wheel wheel + qaataha;

b. Astaamaha

*6 badhamada caadiga ah ayaa xakamayn kara 6 Beddel wax soo saarka;
*Shaashadda soo-bandhigidda waxay soo bandhigaysaa qiimaha isku-duwidda diiwaanka PLC ee u dhiganta wakhtiga dhabta ah, and supports 6-axis display of real-time coordinates.

2.Goobta codsiga

1）Taageerada gacanta ee elegtarooniga ah waxa ay ku xidhan tahay PLC iyada oo loo sii marayo qaataha Ethernet

a. Gacma-gacmeedku waxa uu xogta furaha si fiilo la'aan ah ugu gudbiyaa qaataha, oo qaataha ayaa ku qoraya furayaasha iyada oo loo marayo nidaamka fiilada shabakadda PLC ee aagga DB; qaataha ayaa akhriya xogta laga soo bandhigay aagga DB loo qoondeeyey, ka dibna ku soo celi xogta shaashadda shaashadda gacanta. Isticmaaluhu waxa uu habayn karaa ciwaanka saldhiga u ah akhriska iyo qoraalka aagga DB ee giraanta gacantu, so that the handwheel can read and write the data in the DB area of the PLC.

b. Soo-qaaduhu wuxuu taageeraa borotokoolka Siemens S7. Waxay khusaysaa PLC S7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

Qaabka serverka, Isticmaaluhu wuxuu habeeyaa PLC akhrinta iyo qorista ciwaanka iyada oo loo marayo software-ka qaabeynta WGP-ETS;Isticmaal qalabka isku xidhka PLC si aad ugu habayso aqbalaha qaabka macmiilka. Ka dib qaabeynta, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Codsi gaar ah

Codsiga gaarka ah ee qaataha wheel wheel iyo Siemens PLC S7-200:

a. Badhanka giraangiraha gacantu waxa uu u dhigma qiimaha aagga BOOL ee uu dhigay isticmaaluhu PLC. Haddii badhanka taayirrada gacanta la riixo, aagga BOOL ee u dhigma waa run, iyo marka la sii daayo, waa been, iyo ciwaanka saldhiga aagga BOOL waxa lagu dhejin karaa giraangiraha gacanta;

b. Gacma-gacmeedku wuxuu akhriyi karaa qiimaha aagga DB ee PLC. Hal dhidib ayaa leh 4 bytes xogta bandhigay, iyo 6 faasasku waxay leeyihiin wadar ahaan 24 bytes. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Hordhaca muuqaalka

5.Qeexida terminalka qaataha iyo miiska codaynta

6.Cabbirka muuqaalka