I pa kategorizuar – Teknologjia WIXHC https://www.wixhc.cn Industry Leader Wed, 05 Nov 2025 06:21:59 +0000 sq hourly 1 https://wordpress.org/?v=6.8.3 Manuali i udhëzimeve të rrotave elektronike me tela https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Parathënie e Produkteve

Electronic handwheel is used for manual guidance, pozicionim, përafrim i mjeteve, dhe operacione të tjera në mjetet e makinerive CNC. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, zmadhim, buttons, andother signals through communication.
2.Karakteristikat funksionale të produktit
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 meters.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, axis selection, zmadhim, and other information.
3. Mbështetni butonin e ndalimit të urgjencës, Ndërroni daljen e sinjalit IO, and the hand wheel shutdown emergency stop is still valid.
4. Mbështet 6 butona me porosi, switch IO signals, and can output signals to the system through IO wiring or communication.
5. Mbështet 6 ose 8 kontroll i boshtit, with switch IO signals that can be output to the system through IO wiring or communication.
6. Mbështet 3 ose 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Mbështetni Koduesin e Pulsit, 100 pulset/kthesa, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.

 

3. Specifikimet e produktit
Handwheel working power supply voltage DC24V/1A
Tensioni i furnizimit me energji të marrësit DC24V/1A
Receiver IO output load range DC24V
Hand wheel end cable length 10mashkull
Receiver end cable length 1mashkull
Receiver end network cable length 3mashkull
Operating temperature -25℃<X<55℃
Anti-fall height 1mashkull
Custom Button Quantity 6
Product dimensions 233*90.7*77.4（mm）

4.Funksioni i produktit Hyrje

Shënim:
Emergency stop button:
Shtypni butonin e ndalimit të urgjencës, dhe dy grupet e rezultateve të ndalimit të urgjencës në marrës do të shkëputen, and all functions of the handwheel will be invalid.
After releasing the emergency stop, the emergency stop IO output on the receiver is closed, and all functions of the handwheel are restored.
② Screen display:

 

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 butona me porosi, secila që korrespondon me një pikë daljeje IO në marrës, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Shtypni dhe mbani butonin Aktivizo, Shkundni koduesin e pulsit, lëshojnë një sinjal pulsi, and control the movement of the machine axis.
⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Diagram aksesor i produktit

6. Udhëzues për instalimin e produktit
6.1 Hapat e instalimit të produktit
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Referojuni diagramit tonë të instalimeve elektrike të marrësit dhe krahasojeni atë me pajisjet tuaja në vend. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Pas rregullimit të marrësit, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Dimensionet e instalimit të marrësit

6.3 Installation dimensions of aviation plugs

6.4 Diagrami i referencës për instalime elektrike të marrësit
7.Udhëzimet e funksionimit të produktit

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Zgjidhni zmadhimin: Switch the magnification switch and select the magnification level you need.
7. Boshti lëvizës: Shtypni dhe mbani butonin Aktivizo, Zgjidhni çelësin e zgjedhjes së boshtit, Zgjidhni çelësin e zmadhimit, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Shtypni butonin e ndalimit të urgjencës, Prodhimi përkatës i ndalimit të urgjencës IO i marrësit do të shkëputet, Funksioni i duarve të dorës do të çaktivizohet, Lëshoni butonin e ndalimit të urgjencës, Prodhimi i ndalimit të urgjencës IO do të mbyllet, and the handwheel function will be restored.
8.Përshkrimi i modelit të produktit

① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : represents the number of axis selection switches, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Mirëmbajtje
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Ju lutemi shmangni shtrydhjen, rënie, gulçim, etj. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Nëse nuk përdoret për një kohë të gjatë, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.
11. Informacion për sigurinë

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Nëse kërkohet riparim, Ju lutemi kontaktoni prodhuesin. Nëse dëmi shkaktohet nga vetë riparimi, Prodhuesi nuk do të sigurojë garanci

 

]]>