1.Selelekela sa Product

2.Likarolo tsa sehlahisoa

Tobetsa le ho ts'oara konopo ea ho nolofalletsa, ebe o tobetsa konopo ea khetho ea axis ho ka laola motsamao oa axis .Tobetsa 'me u hatelle konopo ea bulela, ebe o totoba sesebelisoa sa khetho ea axis ho chencha axis e tsamaeang e laoloang ke remote control. Fetolela switjha ho tloha sebakeng sa OFF ho ​​ea sebakeng sefe kapa sefe sa axis, and the remote control will power on automatically.

④ Pulse Encoder:

Tobetsa 'me u tšoare konopo ea ho bulela 'me u fetole sekh'outu sa pulse, it will output pulse signals to control the movement of the machine axis.

⑤ LCD e bonts'a skrineng:

5. Setšoantšo sa Lisebelisoa tsa Lihlahisoa

 

6. Tataiso ea ho kenya sehlahisoa

6.1 Mehato ea ho kenya sehlahisoa

1. Kenya mochine o amohelang motlakase ka har'a khabinete ea motlakase ka buckle mokokotlong oa eona, or mount it inside the electrical cabinet through the screw holes at the four corners of the receiver.

2. Sheba setšoantšo sa rona sa ratoang, E bapisoa le eona le lisebelisoa tsa hau tsa marang-rang, and connect the equipment to the receiver with cables.

3. Kamora hore moamoheli a lokisoe sebakeng, kenya lenakana le tšehetsang la moamoheli hantle. Hloma kapa beha ntlha e ka ntle ea lenakana ka ntle ho khabinete ea motlakase. Ho khothalletsoa ho e beha ka holim'a khabinete ea motlakase bakeng sa ts'ebetso e nepahetseng ea matšoao. Se ke oa tlohela antenna e sa ntšoa kapa ua e beha ka har'a khabinete ea motlakase; ho seng joalo, signal failure may occur.

4. Qetellong, bulela sesebelisoa sa motlakase sa remote control, then you can remotely operate the machine via the remote control.

6.2 Litekanyo tsa ho kenya Moamoheli

6.3 Ramoa

7. Litaelo tsa ts'ebetso ea sehlahisoa

1. Matla ho mochini le moamoheli. Letšoao la ts'ebetso ea moamoheli lea benya. Kamora hore remoutu ea elektronike e se nang mohala e tjhaje ka botlalo, e fetole ho tloha ho OFF gear ho ea ho X-axis gear, and the remote control display lights up.

2. Khetha axis : Tobetsa le ho ts'oara konopo ea ho nolofalletsa, toggle the axis selection switch to select the axis to be operated.

3. Khetha ho holisa: Tobetsa le ho ts'oara konopo ea ho nolofalletsa, toggle the magnification switch to select the required magnification gear.

4. Motsamao oa axis: Tobetsa le ho ts'oara konopo ea ho nolofalletsa, khetha sesebelisoa sa ho khetha axis le switch ea ho holisa, ebe u potoloha sekhouto sa pulse. Fetola ho ea ka nako ea oache ho tsamaisa axis ka tsela e nepahetseng, and rotate counterclockwise to move the axis in the negative direction.

5. Tobetsa le ho tšoara konopo ea tloaelo, konopo e tsamaisanang le IO tlhahiso ea moamoheli e tla bulela; lokolla konopo, and the output will turn off.

6. Tobetsa konopo ea STRED STORE, setopo sa tshohanyetso se tsamaelanang sa IO sa moamohedi se a kgaola mme tshebetso ya remoutu e fetoha e sa sebetseng. Tlosa konopo ea ho emisa ts'ohanyetso, the emergency stop IO output closes and the remote control function is restored.

7. Haeba remoutu ya waelese e sa sebetse ka nako e itseng, e tla kena ka mokhoa oa ho robala ho fokotsa tšebeliso ea matla. It can be used normally again by pressing the enable button again.

8.Haeba remoutu ea waelese e sa sebelisoe nako e telele, tima axis switch ho tima ho tima matla le ho lelefatsa bophelo ba betri

8. Tlhaloso ea mohlala oa sehlahisoa

①：UWGP stands for appearance style.

②：Mekhahlelo ea Pulse Output：

05: E bonts'a tlhahiso e phahameng ea Pnp PRNP, ka lipontšo tsa ho hlahisoa ha ho hlahisoa ha li-le b; The number of pulses is 100PPR.

③：E emela palo ea switjha ea axis; 6 e emetse 6 Axes, 7 e emetse 7 Axes, and so on.

④: E emela mofuta oa lets'oao la sesebelisoa sa khetho ea axis.A e emetse lets'oao la tlhahiso ea ntlha-to-ntlha, and B stands for encoder output signal.

⑤: E emetse mofuta oa lets'oao la phetoho ea ho holisa, and B stands for encoder output signal.

⑥: E emela palo ea likonopo tse ikhethileng; 3 e tsamaellana le 6 custom buttons.

⑦: E emela phepelo ea motlakase bakeng sa taolo ea remoutu ea sistimi. 05 e emetse matla a 5V, mme 24 stands for 24V power supply.

⑧: E emela mokhoa oa ho tjhaja mabitso. It starts charging automatically when placed back on the charging base.

9. Product Harcomhootting

 

10. Tlhokomelo le tlhokomelo

1. Please use it in a dry environment at room temperature and pressure to extend its service life.

2. Please avoid using in abnormal environments such as rain and water to extend the service life.

3. Please keep the appearance of the remote control clean to extend its service life.

4. Ka kopo, qoba ho sithabetsa, lahla, kapa ho thula, etc. to prevent damage to the precision components inside the remote control or accuracy errors.

5. Haeba e sa sebelisoe nako e telele, please store the remote control in a clean and safe place.

6. Avoid moisture and shock during storage and transportation.

Remoutu ea ho itšeha ea pina ea thapo ea koloi e loketse sakha ea mofuta oa pina
mechine e sehang. E sebelisa 485 Protocol ea Modbus RTU ho laola lebelo la pina le letšehali le le letona
bafetoleli, mmoho le lebelo le leholo la taolo ya lebelo la enjene le ho qala le ka pele, kamorao,
balaoli ba tataiso e letšehali le e nepahetseng. 'Me e ka bala ts'ebetso ea hona joale ea maqhubu a motlakase a maholo
converter ka ho 485 Protocol ea Modbus RTU. Ka ho hlahloba le ho bapisa nako ea hona joale ea
enjene e kgolo, lebelo la lipina tse ka ho le letšehali le tse nepahetseng li ka fetoloa ka nako ea sebele ho
achieve automatic cutting function.

2. Litšobotsi tsa Ts'ebetso ea Sehlahisoa

1. Ho amohela theknoloji ea puisano e se nang mohala ea 433MHz, e nang le sebaka sa ho sebetsa ka waelese ea 100 meters.
2. Amohela nako ea ho feta ea nako ea nako le ho e sebelisa 32 lihlopha tsa li-remote control tsa waelese
ka nako e le nngwe, without affecting each other.
3. E ts'ehetsa li-converter tsohle tsa maqhubu ka 485 Protocol ea Modbus RTU, le maqhubu a lumellanang ha joale
converter Brands kenyeletsa:Shanghai Xielin, Fuji, Huichuan, Zhangchen, A hlasela, mme . Bakeng sa mefuta
tse sa tsamaisaneng, please contact us for customization.
4. Ts'ebeliso ea Matla a Tšehetsoang, Ho qala, and current reading of large motor frequency converters.
5. Ts'ehetso ea Letsoho le Letsoho le Letona, Ho qala, ka pele, Khutlela, left and right control.
6. Ts'ehetso Mehala ea Liner ea Letsoho la Letsoho le Letona
straight line.
7. Tšehetsa othomathike ho itšeha mosebetsi oa ropo sakha, fetola ka tsela e iketsang lebelo le letšehali le le letona ho
real time according to the current information of the large motor.
8. E boetse e tsamaellana le taolo e tobileng ea tlhahiso ea IO bakeng sa ho qala le ho emisa, le tlhahiso ea matla a analoge
control for motor speed.

3. Litlhaloso tsa Lihlahisoa

4. Selelekela sa Mosebetsi oa Sehlahisoa

Lintlha:
Pontsho ea ①screen:

Switch switch:

③ nolofalletsa:
Likonopo tsa ho kopa, Ts'ebetso e 'ngoe e hloka ho theola konopo ea ho nolofalletsa ts'ebetso,see the instructions for each switch for details.
④Switch e kholo ea motlakase:
Ho sebelisa switch ea lebelo la 3, Ho hula switch ena ho ka laola ho potoloha ha koloi e kholo. Kamora ho e lokolla, mmuso o tla sala, mme ho tla ba le lipontšo tse tsamaeang le skrineng. Motsu oa S1↑ o supa ho potoloha ho ea pele, and the S1 ↓ arrow indicates everse rotation.
⑤small katolosong / fetola phetoho:
Enjene e nyane e na le switch ea 3-speed self-locking ka pele ho eona. Ho tobetsa konopo ea bulela le ho hula switch ena ho ka laola koloi e nyane ho ea pele le morao, mme pontsho e tsamaelanang le yona e tla hlaha skrineng.Motsu wa ↑↑ o emela pele, and the ↓↓ arrow represents backward.
⑥ Tokiso ea mela e otlolohileng:
Ho sebelisa mohoebi oa kakaretso oa nako, tobetsa konopo ea ho nolofalletsa, reteletsa kotola ka ho le letona, 'me u bontše tokiso ea mola o otlolohileng: Df: Leqheka le letšehali le eketseha ka 1 yuniti ka ho potoloha, le le letshehadi
lebelo la koloi le eketseha ka 0.1 yuniti; Fetolela strake ea leqeleng, Pontšo e otlolohileng ea mohala: Df: Ka ho le letona, thinya e 'ngoe le e 'ngoe ea kotola e eketseha ka 1 yuniti, mme lebelo la enjene e nepahetseng le eketseha
ka 0.1 unit.
⑦ Sesebelisoa se senyenyane sa motlakase:
Ho sebelisa switch ea lebelo la 3, Ha o sebetsa ka letsoho, koloi e nyane e ka laoloa ho tjeka ka ho le letšehali kapa ka ho le letona. E kile ea lokolloa, remote control e tla emisa ketso ena ka bo eona. Boemong ba pele, ha switjha ena e butswe, pontsho e tsamaellanang e tla hlaha skrineng. Motsu oa ←↑ o supa ho thinyetsa ka ho le letšehali, mme motsu wa ↑→ o bontsha ho thinyetsa ka ho le letona.Ha e le ka morao, fetola switjha ena 'me pontšo e lumellanang e tla hlaha skrineng. Motsu oa ←↓ o supa ho thinyetsa ka ho le letšehali, and the ↓→ arrow indicates right turn.
⑧ Bula ka lebelo le leholo la koloi:
Ho sebelisa mohoebi oa kakaretso oa nako, ho potoloha 1 grid nako le nako, Bohlokoa ba lebelo la koloi e kholo ea koloi e ka bang 0.2 diyuniti. Fast rotation can quickly modify the speed value of the large motor.
⑨ Taolo e nyane ea lebelo la enjene:
Ho sebelisa mohoebi oa kakaretso oa nako, ka mokhoa oa bukana, tobetsa konopo ea ho nolofalletsa ebe o potoloha gridi e le 'ngoe ka nako，lebelo la lebelo la enjene e nyane le e ho leqele e fetoha ka hoo e ka bang 0.1 diyuniti, le ho potoloha ka potlako ho ka fetola ka potlako boleng ba lebelo la enjene e nyane.Ka mokgwa o itirisang, tobetsa konopo ea ho nolofalletsa ebe u potoloha gridi e le 'ngoe ka nako,lebelo la tekanyo ea lebelo F ea enjene e nyane e fetoha ka hoo e ka bang 0.1 diyuniti. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Sesebelisoa sa matla sa taolo ea hole
The remote control display screen is turned on.

5. Setšoantšo sa Lihlahisoa

6. Tataiso ea ho kenya sehlahisoa
6.1 Mehato ea ho kenya sehlahisoa
1. Kenya mochine o amohelang motlakase ka har'a khabinete ea motlakase ka lesela le ka morao, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Lebisa ho setšoantšo sa hau sa marang-rang le se bapisoang le lisebelisoa tsa hau tsa marang-rang. Connect the equipment to the receiver through wires.
3. Kamora ho lokisa moamoheli, hoa hlokahala ho hokela antenna e nang le moamoheli le ho kenya kapa ho beha pheletso e kantle ea antenna kantle ho khabinete ea motlakase.. Ho khothalletsoa ho e beha kaholimo ho cabinet ea motlakase bakeng sa phello e ntle ka ho fetisisa. Ho thibetsoe ho tlohela antenna e sa kopanngoa kapa ho e beha ka har'a khabinete ea motlakase, as it may cause the signal to be unusable.
4. Qetellong, kenya betri ho remote control, tiisa sekoaelo sa betri, ebe o bulela sesebelisoa sa motlakase sa remote control. Ka mor'a hore remoutu e bonts'a skrine e bonts'a e tloaelehileng
sehokelo se sebetsang, remote control operations can be performed.

6.2 Tekanyo ea moamoheli

6.3 Ramoa

7. Litaelo tsa ts'ebetso ea sehlahisoa
7.1 Litlhophiso tsa taolo ea paramente ea paramente ea paramente
Mokhoa oa ho kenya li-parameter tsa remote control backend:

Fetolela mokhoa oa ho fetola mokhoa oa matsoho, Fetola lebelo la koloi e nyane ho 25 ka mahlakoreng a mabedi, kapa 0, 10, 20, 40, 50 ka nqa tsohle, 'me u tsoele pele ho fetola switch ea pele ea enjene e kholo holimo 3 linako le tlase 3 Linako;
Sebelisa “Taolo e nyane ea lebelo la koloi” kotola ho phetla maqephe, tobetsa konopo ea ho nolofalletsa, ebe o fetola konopo ea taolo ea lebelo la enjene ho fetola liparamente. Ka mor'a phetoho, Fetolela leqephe ho fihlela qetellong,Khetha “Boloka” ho tsoa, ebe o tobetsa konopo ea bulela ho tsoa ho menu;
Liparamente li ka etsahala:
Boholo ba hona joale: mofuta oa maikutlo a motlakase o moholo oa hona joale, beha mefuta 15-200A, kamehla 100;
Parame ea taolo ea lebelo: Mokhoa o itekanetseng, enjene e nyane e potlakisa kapele kapa butle butle,e nyane haholo, set range 200-1500, kamehla 800;
Paramente ea thetso: Beha moeli o ka holimo o lumellang lebelo la enjene ho fetoha. Ha liphetoho tsa morao-rao tse fetang boleng bona, ho fokotseha ho tla etsahala. E nyane, ho potlaka ho fokotseha ha lienjene tsa leqele le le letona, ka bongata ba 05-12 le ea kamehla ea 06;
Potlakisa a1: Lebelo le leholo la enjene, ka potlako e eketsehang, ka bongata ba 00-06 le ea kamehla ea 01;
Thetso A2: Lebelo le leholo la enjene, kapele e fokotseha, ka bongata ba 00-06 le ea kamehla ea 02;
Netefatsa melaeli e potlakileng: Na taolo e nyane ea lebelo la enjene e hloka ho lumelloa? 00 ha e khone, 01 thusa, kamehla ke 01;
Qala ho itšeha: Na enjene e kholo e ipolokela e itšebetsa ka mor'a hore li-switches tse ka pele le tse ka morao li lokolloe? 00 ha e tšoare, 01 tšoara, default 01
Boholo ba ho tsamaea: lebelo le phahameng la ho le letšehali le ho le letona, mefuta 10-100, kamehla 50;
Ho itšeha hajoale: boholo ba ho seha hona joale, e hlahisoa skrineng e le boleng ba IC, mefuta 15-160, default 30,
e lumellanang le IC: 30 e hlahang skrineng. Moeli o ka holimo oa parameter ena ke 80% ea boholo ba hajoale;
Moeli oa Default: Lebelo la kamehla la enjene e nyane ea othomathike ea ho itšeha ha e buletsoe e ka har'a mefuta e fapaneng ea 0-100, ka kamehla ea 10. Skrine e bonts'a F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Mokhoa o itekanetseng: Beha ho 00, switjha ya othomathike/ka letsoho ke switjha ya mokgwa. Beha ho 01, switjha ya othomathike/ya letsoho e setetswe boemong ba othomathiki, skrine e bonts'ang e bonts'a khanya, mme sephetho sa othomathike ho seamohedi se kwetswe. Ha e setetsoe ho manual, "Automatic output terminal" e khaotsoe;
Ho kheloha lebelo la lebelo: Moeli o ka holimo oa lebelo la ho itšeha ka mokhoa o itekanetseng oa mefuta e nyenyane ea motlakase ho tloha 00 ho 200, ka kamehla ea 60 le pontsho e tsamaellanang ya 6.0 skrineng; Moedi o ka hodimo wa boleng ba pontsho=moedi wa lebelo la ho fokotsa x 0.1;
Moamoheli ea phahameng: lebelo le leholo la enjene e kgolo, mefuta 10-100, kamehla 50;
Lisebelisoa tsa Mbus (E tlameha): Khetho ea mohlala o moholo oa motlakase oa motlakase, mefuta 00-03, kamehla 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Innovance (Zhongchen, Robicson)
Lisebelisoa tsa SBUS (E tlameha): Khetho e nyane ea motor ea cover, mefuta 00-05, kamehla 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Innovance (Zhongchen, Robicson)

04-Anchuanda 05-ha ho na

7.2 Paramente e maemong a khafetsa ea converner
1. Khetho: Chaena ea puisano ea puisano
2. Khetho ea mantlha ea Francy Harder: Puisano e fanoeng
3. Sekhahla sa Baud: 19200
4. Sebopeho sa data: Ha ho netefatso, Sebopeho sa data<8-N-1>
5. Aterese ea lehae: Seta sekhahla sa cequency se sephara ho 1, Khatiso ea nako e telele ea nako e telele ho 2, mme
the large motor frequency converter to 3
7.3 Litaelo tsa Ts'ebetso ea taolo ea taolo
1. Matla ho Mochine, Bulela taolo ea hole, kenya remote control backend, set the
remote control backend parameters, haholo-holo ho seta enjene e nyane le maqhubu a makoloi a maholo
mefuta ea converter: (tlola mohato ona haeba moetsi oa mochini o se a e hlophisitse);
2. Beha liparamethara tsa sepolesa sa maqhubu a Frequency (tlola mohato ona haeba moetsi oa mochini
e se e e behile);
3. Beha taolo ea hole ho mode ea puo, ebe o sebelisa remote control ho tsamaisa mochini ho
boemo ba ho sebetsa;
4. Ka mokhoa oa bukana, beha lebelo la ho seha ha enjene e kholo ho IC le lebelo la enjene e kholo
5. Fetolela mode 'me u behelle boleng ba lebelo la lebelo la FETing FUT bakeng sa koloi e nyane;
6. Ka mokhoa o ikemetseng, Fetolela switch e kholo ea koloi ho qala ho qala koloi e kholo, ebe o reteleha
mofetoheli o monyane wa enjene ho ya pele kapa morao, 'me remoutu e kena ho itšeha ka boiketsetso
mode to start cutting.

8.Product Harcomhootting

9.Tlhokomelo
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Haeba e sa sebelisoe nako e telele, Ka kopo tlosa betri 'me u boloke remote control le betri sebakeng se hloekileng
and safe place.
6.Nakong ea polokelo le lipalangoang, attention should be paid to moisture and shock resistance.

10. Tlhahisoleseling ea polokeho
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Ka kopo khutlisa betri ka nako ha betri e le tlase haholo ho qoba liphoso tse bakoang ke
matla a sa lekaneng, which may result in the remote control being unable to operate.
3. Haeba ho lokisoa ho hlokahala, Ka kopo ikopanye le moetsi. Haeba tšenyo e bakoa ke ho lokisa, moetsi
will not provide warranty.

Mohlala: Dh01r-4w-267

Lisebelisoa tse sebetsang:Lisebelisoa tse fapaneng tsa indasteri

2.Setšoantšo sa thepa ea sehlahisoa

Hlokomela: O ka khetha e 'ngoe ea li-antenas tse tharo. The suction cup antenna is standard by default.

3.Tlhaloso ea mohlala oa sehlahisoa

Hlokomela:
① Dh01r letototo letoto la DH01R, Haeba ho na le teka-tekano, e bolela ka tlhahiso ea tšohanyetso;ntle le t, it means without emergency stop output.

②if ha ho na tlhahiso ea analogi, Ha ho na tlhoko ea ho bua ka 0W kapa 0R; analogquoation w1, W2, W3, le w4 default ho 0-10v Ansotage Tlhahiso ea voltage; ka nako e tšoanang, W1 le w2 li ka atolosoa ho 2 Lits'oants'o tse ikhethileng tsa dijithale tsa dijithale, ka bongata ba 0 -5K OHMS, ½ watt; Qeto: 20 ohms. Ho ka sebelisoa menyetla ea dijithale ea dijithale ho laola mocheso o boima oa mochine oa Welding oa Welding oa Welding. Haeba tlhahiso ea dijithale ea dijithale ea hlokahala, user notes are required.

Inseanalog Inpon, ho tloha 1 ho 2, ho supa hore ho na le 1 ho 2 Lits'oants'o tsa Analog(Boholo 2 Liteishene); Ha ho na le semelo sa analogig, U hloka ho hlokomela mefuta ea lithaba tsa lithaelese tsa analogig (ramolao ea rona ea ratoang ho 0 -5V, Mosebelisi le eena a ka hlokomela joalo ka 4-20 ma kapa 0-10v, jj.) le sebopeho se lumellanang sa palo ea analog (ka mohlala: Pontšo 0-100 Volts kapa 0-1000 amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Likaroloana

1) Boholo 26 e pheta-pheta;
2) Boholo 4 Liteishene tsa Analog 0-10v (Bontša mofuta o ka etsoa): Ts'ehetso 2 Liteishene tsa Digital tse Akaretsang tsa Digital tse Akaretsang;
3) 2 Analog Inputs; mme e bonts'itsoe ka taolo ea hole, Lenaneo la pontšo e ka etsoa
4) Liteishene tse 1 tsa SIRGEND STOWN RITUBING CONOLO E NANG KOTSI;
5) E tsamaisoa ke 3 Li-Lotch tsa AA, Moralo oa tšebeliso ea matla a tlase;
6) Sebaka sa ts'ebetso e se nang mohala ke 200 Metres;
7) IPpere ea ts'ireletso ea IP67;
8) E nang le ts'ebetso ea switch, e ts'ehetsa li-switch tse 4;
9）Back strap design.

5.Tlhaloso ea setsi sa taolo ea sebaka se hole

6.Hlahisa kenyelletso ea litaba

Boleng ba W1 Snob: W1: 0-1000 (paramente e ka fetoha 0-9999)
Boleng ba W2 Knob: W2: 0-5000 (paramente e ka fetoha 0-9999)
Boleng ba W3 Knob: W3: 0-5000 (paramente e ka fetoha 0-9999)
Boleng ba W4 Knob: W4: 0-5000 (paramente e ka fetoha 0-9999)
ADC1 Pontšo ea maikutlo: 0-1000 (paramente e ka fetoha 0-5000)
Pontšo ea maikutlo ea ADC2: 0-1000 (paramente e ka fetoha 0-5000)

Lijo tse tlase tsa voltage: Better ea taolo e hole haholo e tlase haholo, please replace the battery.

Marang-rang a oa: Lets'oao le se nang mohala le sitisoa. Ka kopo sheba matla a moamoheli, e e matla hape, and restart the remote control.

7.Litaelo tsa Ts'ebetso ea Ts'ebetso ea Ts'ebetso ea Ts'ebetso

1) Bulela taolo e hole
Ha moamoheli a ntse a tsoela pele ho, Moeli oa Molao o Sesupo; Kenya libeteri tse peli tsa AA taolo ea hole, Bulela phetoho ea motlakase, mme pontsho e bontša boleng,Ho bontša ho qala ka katleho. The receiver working indicator light becomes solid.
2) Switch le ho kenya tšebetso
Ts'ebetso efe kapa efe ea switch ea Twist le konopo ho taolo ea hole e ka laola ntlha ea tlhahiso e lumellanang e lumellanang e lumellanang e lumellanang. Lintlha tsohle tsa ho fanoa ka mokhoa oa ho fanoa ka moamoheli ka tloaelo li bulehile lipontšo tse bulehileng ka ho tlohela;
3) Phetoho ea lebelo la W1-W4
Fetola lithupa ho W1-W4 ha li sebetse ka mokhoa o lumellanang oa mantsoe a lumellanang kapa a Potentimeter. Signal ea Assalog ea ho etsa qeto ea hore pheletsong ea ho Fokotsa letšoao la voltage ea 0-10, le lipente tsa potetiestimeter ho isa ho 0-5k;
4) Ts'ebetso ea tšohanyetso ea tšohanyetso
Ha konopo ea maemo a tšohanyetso e hatelloa, Tsohle tsa ho saena li-France tsa matšoao li khaotsoe 'me tlhahiso ea analog e khaotsoe; Kamora hore ho lokolloe ka tšohanyetso ho lokolloa, Lipontšo tsohle tsa switch li khutlisetsoa 'me tlhahiso ea analog e khutliselitsoe; 5 Metsotsoana e mekae ka mor'a taolo e hole e tima, Lits'enyehelo tsohle tsa ho fanoa ka mokhoa oa ho thibela le ho khaoloa le tsebiso ea analog li sa fetohe. Ha taolo ea hole e buletsoe, Lits'oants'o tsa Switch Switch li hlaphoheloa;
5) Lenaneo la paramethara (Basebelisi ba thibetsoe ho fetolela se ikhethetseng)
Mesebetsi e meng ea taolo ea hole e ka fetoloa ka paramente. Ha lipontšo w1 = 0, Tobetsa konopo ea K9-B 3 linako tse ling ka tatellano, ebe o tobetsa konopo ea K9-a 3 Linako tse ka tatellano ho kenya menu ea paramente; K9-A le senotlolo sa K9-B Ho ea leqepheng la menu ebe u khetha li-parameters; tšoara k1-a, ebe o tobetsa konopo ea K9-A / B B konopo ho fetola li-parameters;
Tsoa menu ea parameter: khetha ho boloka kapa ho se boloke, ebe o tobetsa konopo ea K1-AT ho netefatsa hore ho tsoa;
F1w1 Range: Boleng ba lipontšo tsa "skb" ho skrineng sa lipontšo, e fetoletsoeng ho 0 ho 9999;
F2W2 Range: Boleng ba pontšo ea W2 Knob ho skrineng sa lipontšo, e fetoletsoeng ho 0 ho 9999;
F3W3 SHARS: Boleng ba Consort ba W3 Knob ho skrineng sa lipontšo, e fetoletsoeng ho 0 ho 9999;
F4W4 Range: Boleng ba lipontšo tsa pontsho tsa w4 skb ho skrineng sa lipontšo, e fetoletsoeng ho 0 to 9999
F5A1 Range: Bontša boleng ba Tlhahiso ea Tlhahiso ea ADC1, 0-5000 e fetoletsoeng;
F6A2 Range: Bontša boleng ba Tlhahiso ea Tlhahiso ea ADC2, 0-5000 e fetoletsoeng;
Alamo ea hajoale: Beha boleng ba alarm bakeng sa polelo ea maikutlo ea ADC1 le ADC2. Ha Adc1 le ADC2 e feta boleng bona, Pontšo ea taolo e hole e tla ba alamo; Ha boleng bona ke 0, ts'ebetso ea alamo ha e sebetse;

8.Litšobotsi tse hole tsa motlakase

9.Boholo ba taolo ea taolo

The final interpretation right of this product belongs only to our company.

Mohlala: DH12S-P6S

Lisebelisoa tse sebetsang:wire saw/blade saw machine

2.Setšoantšo sa thepa ea sehlahisoa

Hlokomela: O ka khetha e 'ngoe ea li-antenas tse tharo. The suction cup antenna is standard by default.

3.Tlhaloso ea setsi sa taolo ea sebaka se hole

4.Selelekela sa dikahare

Main motor speed: Main: 0-50
Traveling motor speed: Line: 0-50
Maximum speed limit of automatic cutting traveling motor: Speed: 0-30
(paramethara fetohang)
Automatic cutting main motor setting current: Setting: 28 (paramethara fetohang)
Swing arm motor speed: Swing: 0-50

Lijo tse tlase tsa voltage: Better ea taolo e hole haholo e tlase haholo, please replace the battery.

Marang-rang a oa: Lets'oao le se nang mohala le sitisoa. Ka kopo sheba matla a moamoheli, e e matla hape, and restart the remote control.

5.Litaelo tsa Ts'ebetso ea Ts'ebetso ea Ts'ebetso ea Ts'ebetso

1）Turn on the remote control

Ha moamoheli a ntse a tsoela pele ho, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; Kenya libeteri tse peli tsa AA taolo ea hole, Bulela phetoho ea motlakase, and the display will show the motor speed, indicating successful startup.

2）Large motor and speed regulation/Main motor and speed regulation

Press and hold “Speed Regulation Enable”, retelehela “Tsoela Pele/Ka morao” swinyetsa ho ya pele, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, retelehela “Tsoela Pele/Ka morao” swinyetsa ho kgutlela morao, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Rotate the “big motor” knob to adjust the speed regulation voltage of the receiver’s main motor inverter to 0-10V;

3）Traveling motor

Press and hold “Speed Adjustment Enable”, retelehela “Tsoela Pele/Ka morao” switch to forward or backward, and the walking motor will move at a high speed of 50;

4）Swing arm motor and speed regulation

Fetola “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;

Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” Fetolela, the swing arm motor will move at a high speed of 50;

5）Travel motor speed limit adjustment

Tobetsa o hatelle “speed adjustment enable” konopo le ho potoloha “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “pele/ho furalla” switch forward or backward to enter the automatic cutting mode;

7） Parameter menu (basebelisi ba thibetsoe ho e fetola ntle le tumello)

Enter the parameter menu:Ka mokhoa oa bukana, when the main motor speed is 0, sutumelletsa switjha e yang pele/morao ka makgetlo a mararo ka tatellano, and then push it down three times in a row to enterthe parameter menu;
Tsoa menu ea parameter: Turn the speed adjustment knob, select save or not save, and press the enable button to confirm;
Rated current: The maximum value of the main motor current, unit Ampere;
Speed adjustment parameters: Automatic cutting control parameters, kamehla 800, unit milli second,phetoho e thibetsoe;
Paramente ea thetso: Ha ho itšeha hona joale boleng ba phetoho e feta boleng bona, rapid deceleration begins, unit Ampere;
Potlakisa a1: When the cutting current is lower than the set cutting current, the speed value increased by each acceleration of the walking motor;
Thetso A2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, phetoho e thibetsoe;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, phetoho e thibetsoe;
Boholo ba hona joale: The range of main motor feedback current, unit Ampere;
Moamoheli ea phahameng: Remote control main motor speed adjustment display range;
Boholo ba ho tsamaea: Invalid parameter;
Meeli ea lebelo le tima: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Add and subtract the offset increment of the sensitivity parameter;
Set current: Ho itšeha ka ho iketsa, the threshold of main motor feedback current. If this value is exceeded,the walking motor starts to decelerate;Below this value, the walking motor starts to accelerate;yuniti: Ampere;
Idling exit: When the automatic mode starts, if the main motor feedback current is less than this value,it will be in the idling mode.If it is greaterthan this value, it will exit the idling mode and enter the cutting mode.Unit is ampere;
No-load current:When automatic mode starts, if the main motor feedback current is less than this value,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;ho seng joalo, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;

6.Litšobotsi tse hole tsa motlakase

7.Boholo ba taolo ea taolo

The final interpretation right of this product belongs only to our company.

Mohlala: DH12S-LD

Lisebelisoa tse sebetsang:mochini o khasang ka terata

Setšoantšo sa thepa ea sehlahisoa

Hlokomela: O ka khetha e 'ngoe ea li-antenas tse tharo. The suction cup antenna is standard by default.

Tlhaloso ea setsi sa taolo ea sebaka se hole

Selelekela sa dikahare

Lebelo le leholo la koloi：S1：0-50
Lebelo la koloi e nyane: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic seha palo e kahodimodimo jwale: Kea bona: 0-35 (paramethara fetohang)
Boleng ba tokiso ea mola: Df: -99-99 (1 yuniti e ka bang 0.02V)

Lijo tse tlase tsa voltage: Better ea taolo e hole haholo e tlase haholo, please replace the battery.

Marang-rang a oa: Lets'oao le se nang mohala le sitisoa. Ka kopo sheba matla a moamoheli, e e matla hape, and restart the remote control.

Litaelo tsa Ts'ebetso ea Ts'ebetso ea Ts'ebetso ea Ts'ebetso

1.Bulela remote

Ha sesebelisoa se buletsoe, lebone la RF-LED ho moamoheli le qala ho benya;kenya libeteri tse peli tsa AA ho threceiver e remote control, Bulela phetoho ea motlakase, mme pontsho e tla bontsha lebelo la enjene, indicating successful startup.

2.Taolo e kholo ea motlakase le lebelo

Fetola “pele/ho furalla” swinyetsa ho ya pele, enjene e kholo ea moamoheli e tla bulela, mme pontsho e tla bontsha ho ya pele

Fetola “pele/ho furalla” swinyetsa ho kgutlela morao, enjene e kholo ea moamoheli e tla buleha ka morao, 'me pontšo e tla bontša ka morao

Rotate the “phetoho e kholo ea lebelo la koloi” konopo ho lokisa motlakase o moholo oa ho fetola lebelo la moamoheli 0-10V;

3.Enjene e nyane le taolo ea lebelo

Tsamaisa the “pele/ho furalla” swinyetsa ho ya pele, lebili le letšehali ho ea pele le lebili le letona ho ea pele la moamoheli li buletsoe, mme pontsho e bontsha ho ya pele

Fetola “Tsoela Pele/Ka morao” swinyetsa ho kgutlela morao, lebili le letšehali le ka morao le lebili le letona la moamoheli lia buloa, 'me ponts'o e bontša ka morao

4.Etelehela ka ho le letšehali le ka ho le letona

Fetola “Ka ho le letšehali/Ka ho le letona” swinyetsa ho le letshehadi, lebili le letona la moamoheli le tla fetela pele le ho bulela,mme pontsho e tla bontsha ka ho le letshehadi

Fetola “retelehela ho le letshehadi/ka ho le letona” switjha ho ya ka ho le letona, lebili le letšehali la moamoheli le tla fetela pele le ho bulela, mme ponts'o e tla bonts'a retelehela ho le letona

5.Fetolela sebakeng

Ka mokhoa oa bukana:
Etelehela ka ho le letšehali sebakeng: Tobetsa o hatelle “Thusa” konopo, retelehela “Phetla ka ho le letšehali/ka ho le letona” swinyetsa ho le letshehadi, lebili le letšehali ho ea morao le lebili le letona ho ea pele la moamoheli li buletsoe,mme o qale ho thinyetsa ka ho le letshehadi sebakeng;

Phetla ka ho le letona sebakeng: Tobetsa o hatelle “Thusa” konopo, retelehela “Phetla ka ho le letšehali/ka ho le letona” swinyetsa ho le letona, lebili le letšehali ho ea pele le lebili le letona le ka morao la moamoheli li buletsoe, mme moamoheli o qala ho thinya hantle sebakeng;

6.Tokiso e nyane ea lebelo la lebelo la enjene

Ka mokhoa o ikemetseng: tobetsa le ho tšoara “Thusa” konopo le ho potoloha “Phetoho ea lebelo la likoloi tse nyane” ho lokisa lebelo le phahameng la koloi e nyane nakong ea ho itšeha ka boiketsetso;

7.Ho itšeha ka ho iketsa

Mohato oa pele ke ho qala enjene e kholo; mohato oa bobeli ke ho switjha mode switjha ho “Auto”; mohato oa boraro ke ho qala enjene e nyane mme skrineng se tla hlaha “Ho khaola Auto”,e bontshang hore e kene mokgweng wa ho seha o itirisang;

8. Tokiso ea mela e otlolohileng

Ha li-motor tse tsamaeang ka ho le letšehali le tse nepahetseng li ea pele le morao, lebelo le letshehadi le le letona ha le tsamaellane, mme ho tsamaya ka tsela e otlolohileng hoa kgeloha. U ka sebelisa mokhoa oa ho lokisa linear oa remote control ho lokisa lebelo la lebili le lets'ehali le le letona.;
Molao-motheo oa ho lokisa: Ka mosebetsi oa ho lokisa, lebelo la lebidi le letshehadi le hlophisitswe hantle ho fihlela lebelo le lekanang le la lebidi le letona, e le ho hokahanya lebelo la mabili le letšehali le ho felisa ho kheloha;
Mokhoa oa ts'ebetso ea ho kheloha: Ka mokhoa oa bukana, tobetsa le ho tšoara “Thusa” konopo le ho potoloha “Taolo ea lebelo la likoloi tse nyane”;
Fetola ho ea ka nako ea oache ho eketsa lebelo la lebili le letšehali 'me boleng ba tokiso bo hlahang skrineng bo tla eketseha;
Fetola ka tsela e fapaneng le oache ho fokotsa lebelo la lebelo la lebili le letšehali le boleng ba tokiso bo fokotsehe;
Sebaka sa ho lokisa: Boleng ba ho lokisa -90 ho 90; matla a tokiso ea yuniti e le 'ngoe ea tokiso e ka bang 0.02V;

9. Menu ea parameter (basebelisi ba thibetsoe ho e fetola ntle le tumello)

Mesebetsi e meng ea taolo ea hole e ka fetoloa ka paramente. Ka mokhoa oa bukana, ha lebelo le lenyenyane la enjene S2 ke 10, sutumelletsa switjha e yang pele/morao ka makgetlo a mararo ka tatellano, ebe o e sutumelletsa fatše ka makhetlo a mararo ka tatellano ho kenya menu ea parameter;
Tsoa menu ea parameter: khetha ho boloka kapa ho se boloke, ebe o tobetsa konopo ea nolofalletsa ho netefatsa ho tsoa;
Boholo ba hona joale: ts'ebetso e lekantsoeng ea hona joale ea mochini o sehang ke 80% ea hona joale;
Parame ea taolo ea lebelo: li-parameter tsa taolo ea ho itšeha ka boiketsetso, kamehla 800, phetoho e thibetsoe;
Paramente ea thetso: jarolla ka ho iketsa ho itšeha taolo parameter. Ha ho itšeha hona joale boleng ba phetoho e feta boleng bona,deceleration begins.
Potlakisa a1: jarolla ka ho iketsa ho itšeha taolo parameter, ha motlakase oa ho itšeha o le tlase ho feta sete sa hona joale sa ho itšeha, lebelo la ho potlakisa;
Thetso A2: jarolla ka ho iketsa ho itšeha taolo parameter, ha sekhahla sa ho itšeha se phahame ho feta sete
hona joale, lebelo la ho thella;
Ho hula ka thipa ka ho iketsa: fosahetse;
Qala ho itšeha: 0, ho se ikotlehe; 1, ho notlela. Tobetsa konopo ea ho nolofalletsa + forward and reverse to take effect and self-lock.
Boholo ba ho tsamaea: the maximum speed of the small motor.
Ho itšeha hajoale: seta boholo ba hona joale ba motlakase o moholo bakeng sa ho itšeha ka boiketsetso. Haeba maikutlo a hona joale a feta boleng bona, it will start to decelerate.
Moeli oa Default: the default maximum speed of automatic cutting speed when turning on the machine.
Mokhoa o itekanetseng: 0, switch ea othomathike e laoloa ka bo eona; 1, the automatic switch controls the automatic IO output point.
Meeli ea lebelo le tima: the maximum speed of the small motor during automatic cutting.
Moamoheli ea phahameng: maximum speed of large motor.

Litšobotsi tse hole tsa motlakase

Boholo ba taolo ea taolo

The final interpretation right of this product belongs only to our company.