Remoutu ea ho itšeha ea pina ea thapo ea koloi e loketse sakha ea mofuta oa pina
mechine e sehang. E sebelisa 485 Protocol ea Modbus RTU ho laola lebelo la pina le letšehali le le letona
bafetoleli, mmoho le lebelo le leholo la taolo ya lebelo la enjene le ho qala le ka pele, kamorao,
balaoli ba tataiso e letšehali le e nepahetseng. 'Me e ka bala ts'ebetso ea hona joale ea maqhubu a motlakase a maholo
converter ka ho 485 Protocol ea Modbus RTU. Ka ho hlahloba le ho bapisa nako ea hona joale ea
enjene e kgolo, lebelo la lipina tse ka ho le letšehali le tse nepahetseng li ka fetoloa ka nako ea sebele ho
achieve automatic cutting function.

2. Litšobotsi tsa Ts'ebetso ea Sehlahisoa

1. Ho amohela theknoloji ea puisano e se nang mohala ea 433MHz, e nang le sebaka sa ho sebetsa ka waelese ea 100 meters.
2. Amohela nako ea ho feta ea nako ea nako le ho e sebelisa 32 lihlopha tsa li-remote control tsa waelese
ka nako e le nngwe, without affecting each other.
3. E ts'ehetsa li-converter tsohle tsa maqhubu ka 485 Protocol ea Modbus RTU, le maqhubu a lumellanang ha joale
converter Brands kenyeletsa:Shanghai Xielin, Fuji, Huichuan, Zhangchen, A hlasela, mme . Bakeng sa mefuta
tse sa tsamaisaneng, please contact us for customization.
4. Ts'ebeliso ea Matla a Tšehetsoang, Ho qala, and current reading of large motor frequency converters.
5. Ts'ehetso ea Letsoho le Letsoho le Letona, Ho qala, ka pele, Khutlela, left and right control.
6. Ts'ehetso Mehala ea Liner ea Letsoho la Letsoho le Letona
straight line.
7. Tšehetsa othomathike ho itšeha mosebetsi oa ropo sakha, fetola ka tsela e iketsang lebelo le letšehali le le letona ho
real time according to the current information of the large motor.
8. E boetse e tsamaellana le taolo e tobileng ea tlhahiso ea IO bakeng sa ho qala le ho emisa, le tlhahiso ea matla a analoge
control for motor speed.

3. Litlhaloso tsa Lihlahisoa

4. Selelekela sa Mosebetsi oa Sehlahisoa

Lintlha:
Pontsho ea ①screen:

Switch switch:

③ nolofalletsa:
Likonopo tsa ho kopa, Ts'ebetso e 'ngoe e hloka ho theola konopo ea ho nolofalletsa ts'ebetso,see the instructions for each switch for details.
④Switch e kholo ea motlakase:
Ho sebelisa switch ea lebelo la 3, Ho hula switch ena ho ka laola ho potoloha ha koloi e kholo. Kamora ho e lokolla, mmuso o tla sala, mme ho tla ba le lipontšo tse tsamaeang le skrineng. Motsu oa S1↑ o supa ho potoloha ho ea pele, and the S1 ↓ arrow indicates everse rotation.
⑤small katolosong / fetola phetoho:
Enjene e nyane e na le switch ea 3-speed self-locking ka pele ho eona. Ho tobetsa konopo ea bulela le ho hula switch ena ho ka laola koloi e nyane ho ea pele le morao, mme pontsho e tsamaelanang le yona e tla hlaha skrineng.Motsu wa ↑↑ o emela pele, and the ↓↓ arrow represents backward.
⑥ Tokiso ea mela e otlolohileng:
Ho sebelisa mohoebi oa kakaretso oa nako, tobetsa konopo ea ho nolofalletsa, reteletsa kotola ka ho le letona, 'me u bontše tokiso ea mola o otlolohileng: Df: Leqheka le letšehali le eketseha ka 1 yuniti ka ho potoloha, le le letshehadi
lebelo la koloi le eketseha ka 0.1 yuniti; Fetolela strake ea leqeleng, Pontšo e otlolohileng ea mohala: Df: Ka ho le letona, thinya e 'ngoe le e 'ngoe ea kotola e eketseha ka 1 yuniti, mme lebelo la enjene e nepahetseng le eketseha
ka 0.1 unit.
⑦ Sesebelisoa se senyenyane sa motlakase:
Ho sebelisa switch ea lebelo la 3, Ha o sebetsa ka letsoho, koloi e nyane e ka laoloa ho tjeka ka ho le letšehali kapa ka ho le letona. E kile ea lokolloa, remote control e tla emisa ketso ena ka bo eona. Boemong ba pele, ha switjha ena e butswe, pontsho e tsamaellanang e tla hlaha skrineng. Motsu oa ←↑ o supa ho thinyetsa ka ho le letšehali, mme motsu wa ↑→ o bontsha ho thinyetsa ka ho le letona.Ha e le ka morao, fetola switjha ena 'me pontšo e lumellanang e tla hlaha skrineng. Motsu oa ←↓ o supa ho thinyetsa ka ho le letšehali, and the ↓→ arrow indicates right turn.
⑧ Bula ka lebelo le leholo la koloi:
Ho sebelisa mohoebi oa kakaretso oa nako, ho potoloha 1 grid nako le nako, Bohlokoa ba lebelo la koloi e kholo ea koloi e ka bang 0.2 diyuniti. Fast rotation can quickly modify the speed value of the large motor.
⑨ Taolo e nyane ea lebelo la enjene:
Ho sebelisa mohoebi oa kakaretso oa nako, ka mokhoa oa bukana, tobetsa konopo ea ho nolofalletsa ebe o potoloha gridi e le 'ngoe ka nako，lebelo la lebelo la enjene e nyane le e ho leqele e fetoha ka hoo e ka bang 0.1 diyuniti, le ho potoloha ka potlako ho ka fetola ka potlako boleng ba lebelo la enjene e nyane.Ka mokgwa o itirisang, tobetsa konopo ea ho nolofalletsa ebe u potoloha gridi e le 'ngoe ka nako,lebelo la tekanyo ea lebelo F ea enjene e nyane e fetoha ka hoo e ka bang 0.1 diyuniti. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Sesebelisoa sa matla sa taolo ea hole
The remote control display screen is turned on.

5. Setšoantšo sa Lihlahisoa

6. Tataiso ea ho kenya sehlahisoa
6.1 Mehato ea ho kenya sehlahisoa
1. Kenya mochine o amohelang motlakase ka har'a khabinete ea motlakase ka lesela le ka morao, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Lebisa ho setšoantšo sa hau sa marang-rang le se bapisoang le lisebelisoa tsa hau tsa marang-rang. Connect the equipment to the receiver through wires.
3. Kamora ho lokisa moamoheli, hoa hlokahala ho hokela antenna e nang le moamoheli le ho kenya kapa ho beha pheletso e kantle ea antenna kantle ho khabinete ea motlakase.. Ho khothalletsoa ho e beha kaholimo ho cabinet ea motlakase bakeng sa phello e ntle ka ho fetisisa. Ho thibetsoe ho tlohela antenna e sa kopanngoa kapa ho e beha ka har'a khabinete ea motlakase, as it may cause the signal to be unusable.
4. Qetellong, kenya betri ho remote control, tiisa sekoaelo sa betri, ebe o bulela sesebelisoa sa motlakase sa remote control. Ka mor'a hore remoutu e bonts'a skrine e bonts'a e tloaelehileng
sehokelo se sebetsang, remote control operations can be performed.

6.2 Tekanyo ea moamoheli

6.3 Ramoa

7. Litaelo tsa ts'ebetso ea sehlahisoa
7.1 Litlhophiso tsa taolo ea paramente ea paramente ea paramente
Mokhoa oa ho kenya li-parameter tsa remote control backend:

Fetolela mokhoa oa ho fetola mokhoa oa matsoho, Fetola lebelo la koloi e nyane ho 25 ka mahlakoreng a mabedi, kapa 0, 10, 20, 40, 50 ka nqa tsohle, 'me u tsoele pele ho fetola switch ea pele ea enjene e kholo holimo 3 linako le tlase 3 Linako;
Sebelisa “Taolo e nyane ea lebelo la koloi” kotola ho phetla maqephe, tobetsa konopo ea ho nolofalletsa, ebe o fetola konopo ea taolo ea lebelo la enjene ho fetola liparamente. Ka mor'a phetoho, Fetolela leqephe ho fihlela qetellong,Khetha “Boloka” ho tsoa, ebe o tobetsa konopo ea bulela ho tsoa ho menu;
Liparamente li ka etsahala:
Boholo ba hona joale: mofuta oa maikutlo a motlakase o moholo oa hona joale, beha mefuta 15-200A, kamehla 100;
Parame ea taolo ea lebelo: Mokhoa o itekanetseng, enjene e nyane e potlakisa kapele kapa butle butle,e nyane haholo, set range 200-1500, kamehla 800;
Paramente ea thetso: Beha moeli o ka holimo o lumellang lebelo la enjene ho fetoha. Ha liphetoho tsa morao-rao tse fetang boleng bona, ho fokotseha ho tla etsahala. E nyane, ho potlaka ho fokotseha ha lienjene tsa leqele le le letona, ka bongata ba 05-12 le ea kamehla ea 06;
Potlakisa a1: Lebelo le leholo la enjene, ka potlako e eketsehang, ka bongata ba 00-06 le ea kamehla ea 01;
Thetso A2: Lebelo le leholo la enjene, kapele e fokotseha, ka bongata ba 00-06 le ea kamehla ea 02;
Netefatsa melaeli e potlakileng: Na taolo e nyane ea lebelo la enjene e hloka ho lumelloa? 00 ha e khone, 01 thusa, kamehla ke 01;
Qala ho itšeha: Na enjene e kholo e ipolokela e itšebetsa ka mor'a hore li-switches tse ka pele le tse ka morao li lokolloe? 00 ha e tšoare, 01 tšoara, default 01
Boholo ba ho tsamaea: lebelo le phahameng la ho le letšehali le ho le letona, mefuta 10-100, kamehla 50;
Ho itšeha hajoale: boholo ba ho seha hona joale, e hlahisoa skrineng e le boleng ba IC, mefuta 15-160, default 30,
e lumellanang le IC: 30 e hlahang skrineng. Moeli o ka holimo oa parameter ena ke 80% ea boholo ba hajoale;
Moeli oa Default: Lebelo la kamehla la enjene e nyane ea othomathike ea ho itšeha ha e buletsoe e ka har'a mefuta e fapaneng ea 0-100, ka kamehla ea 10. Skrine e bonts'a F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Mokhoa o itekanetseng: Beha ho 00, switjha ya othomathike/ka letsoho ke switjha ya mokgwa. Beha ho 01, switjha ya othomathike/ya letsoho e setetswe boemong ba othomathiki, skrine e bonts'ang e bonts'a khanya, mme sephetho sa othomathike ho seamohedi se kwetswe. Ha e setetsoe ho manual, "Automatic output terminal" e khaotsoe;
Ho kheloha lebelo la lebelo: Moeli o ka holimo oa lebelo la ho itšeha ka mokhoa o itekanetseng oa mefuta e nyenyane ea motlakase ho tloha 00 ho 200, ka kamehla ea 60 le pontsho e tsamaellanang ya 6.0 skrineng; Moedi o ka hodimo wa boleng ba pontsho=moedi wa lebelo la ho fokotsa x 0.1;
Moamoheli ea phahameng: lebelo le leholo la enjene e kgolo, mefuta 10-100, kamehla 50;
Lisebelisoa tsa Mbus (E tlameha): Khetho ea mohlala o moholo oa motlakase oa motlakase, mefuta 00-03, kamehla 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Innovance (Zhongchen, Robicson)
Lisebelisoa tsa SBUS (E tlameha): Khetho e nyane ea motor ea cover, mefuta 00-05, kamehla 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Innovance (Zhongchen, Robicson)

04-Anchuanda 05-ha ho na

7.2 Paramente e maemong a khafetsa ea converner
1. Khetho: Chaena ea puisano ea puisano
2. Khetho ea mantlha ea Francy Harder: Puisano e fanoeng
3. Sekhahla sa Baud: 19200
4. Sebopeho sa data: Ha ho netefatso, Sebopeho sa data<8-N-1>
5. Aterese ea lehae: Seta sekhahla sa cequency se sephara ho 1, Khatiso ea nako e telele ea nako e telele ho 2, mme
the large motor frequency converter to 3
7.3 Litaelo tsa Ts'ebetso ea taolo ea taolo
1. Matla ho Mochine, Bulela taolo ea hole, kenya remote control backend, set the
remote control backend parameters, haholo-holo ho seta enjene e nyane le maqhubu a makoloi a maholo
mefuta ea converter: (tlola mohato ona haeba moetsi oa mochini o se a e hlophisitse);
2. Beha liparamethara tsa sepolesa sa maqhubu a Frequency (tlola mohato ona haeba moetsi oa mochini
e se e e behile);
3. Beha taolo ea hole ho mode ea puo, ebe o sebelisa remote control ho tsamaisa mochini ho
boemo ba ho sebetsa;
4. Ka mokhoa oa bukana, beha lebelo la ho seha ha enjene e kholo ho IC le lebelo la enjene e kholo
5. Fetolela mode 'me u behelle boleng ba lebelo la lebelo la FETing FUT bakeng sa koloi e nyane;
6. Ka mokhoa o ikemetseng, Fetolela switch e kholo ea koloi ho qala ho qala koloi e kholo, ebe o reteleha
mofetoheli o monyane wa enjene ho ya pele kapa morao, 'me remoutu e kena ho itšeha ka boiketsetso
mode to start cutting.

8.Product Harcomhootting

9.Tlhokomelo
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Haeba e sa sebelisoe nako e telele, Ka kopo tlosa betri 'me u boloke remote control le betri sebakeng se hloekileng
and safe place.
6.Nakong ea polokelo le lipalangoang, attention should be paid to moisture and shock resistance.

10. Tlhahisoleseling ea polokeho
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Ka kopo khutlisa betri ka nako ha betri e le tlase haholo ho qoba liphoso tse bakoang ke
matla a sa lekaneng, which may result in the remote control being unable to operate.
3. Haeba ho lokisoa ho hlokahala, Ka kopo ikopanye le moetsi. Haeba tšenyo e bakoa ke ho lokisa, moetsi
will not provide warranty.

Mohlala: Dh01r-4w-267

Lisebelisoa tse sebetsang:Lisebelisoa tse fapaneng tsa indasteri

2.Setšoantšo sa thepa ea sehlahisoa

Hlokomela: O ka khetha e 'ngoe ea li-antenas tse tharo. The suction cup antenna is standard by default.

3.Tlhaloso ea mohlala oa sehlahisoa

Hlokomela:
① Dh01r letototo letoto la DH01R, Haeba ho na le teka-tekano, e bolela ka tlhahiso ea tšohanyetso;ntle le t, it means without emergency stop output.

②if ha ho na tlhahiso ea analogi, Ha ho na tlhoko ea ho bua ka 0W kapa 0R; analogquoation w1, W2, W3, le w4 default ho 0-10v Ansotage Tlhahiso ea voltage; ka nako e tšoanang, W1 le w2 li ka atolosoa ho 2 Lits'oants'o tse ikhethileng tsa dijithale tsa dijithale, ka bongata ba 0 -5K OHMS, ½ watt; Qeto: 20 ohms. Ho ka sebelisoa menyetla ea dijithale ea dijithale ho laola mocheso o boima oa mochine oa Welding oa Welding oa Welding. Haeba tlhahiso ea dijithale ea dijithale ea hlokahala, user notes are required.

Inseanalog Inpon, ho tloha 1 ho 2, ho supa hore ho na le 1 ho 2 Lits'oants'o tsa Analog(Boholo 2 Liteishene); Ha ho na le semelo sa analogig, U hloka ho hlokomela mefuta ea lithaba tsa lithaelese tsa analogig (ramolao ea rona ea ratoang ho 0 -5V, Mosebelisi le eena a ka hlokomela joalo ka 4-20 ma kapa 0-10v, jj.) le sebopeho se lumellanang sa palo ea analog (ka mohlala: Pontšo 0-100 Volts kapa 0-1000 amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Likaroloana

1) Boholo 26 e pheta-pheta;
2) Boholo 4 Liteishene tsa Analog 0-10v (Bontša mofuta o ka etsoa): Ts'ehetso 2 Liteishene tsa Digital tse Akaretsang tsa Digital tse Akaretsang;
3) 2 Analog Inputs; mme e bonts'itsoe ka taolo ea hole, Lenaneo la pontšo e ka etsoa
4) Liteishene tse 1 tsa SIRGEND STOWN RITUBING CONOLO E NANG KOTSI;
5) E tsamaisoa ke 3 Li-Lotch tsa AA, Moralo oa tšebeliso ea matla a tlase;
6) Sebaka sa ts'ebetso e se nang mohala ke 200 Metres;
7) IPpere ea ts'ireletso ea IP67;
8) E nang le ts'ebetso ea switch, e ts'ehetsa li-switch tse 4;
9）Back strap design.

5.Tlhaloso ea setsi sa taolo ea sebaka se hole

6.Hlahisa kenyelletso ea litaba

Boleng ba W1 Snob: W1: 0-1000 (paramente e ka fetoha 0-9999)
Boleng ba W2 Knob: W2: 0-5000 (paramente e ka fetoha 0-9999)
Boleng ba W3 Knob: W3: 0-5000 (paramente e ka fetoha 0-9999)
Boleng ba W4 Knob: W4: 0-5000 (paramente e ka fetoha 0-9999)
ADC1 Pontšo ea maikutlo: 0-1000 (paramente e ka fetoha 0-5000)
Pontšo ea maikutlo ea ADC2: 0-1000 (paramente e ka fetoha 0-5000)

Lijo tse tlase tsa voltage: Better ea taolo e hole haholo e tlase haholo, please replace the battery.

Marang-rang a oa: Lets'oao le se nang mohala le sitisoa. Ka kopo sheba matla a moamoheli, e e matla hape, and restart the remote control.

7.Litaelo tsa Ts'ebetso ea Ts'ebetso ea Ts'ebetso ea Ts'ebetso

1) Bulela taolo e hole
Ha moamoheli a ntse a tsoela pele ho, Moeli oa Molao o Sesupo; Kenya libeteri tse peli tsa AA taolo ea hole, Bulela phetoho ea motlakase, mme pontsho e bontša boleng,Ho bontša ho qala ka katleho. The receiver working indicator light becomes solid.
2) Switch le ho kenya tšebetso
Ts'ebetso efe kapa efe ea switch ea Twist le konopo ho taolo ea hole e ka laola ntlha ea tlhahiso e lumellanang e lumellanang e lumellanang e lumellanang. Lintlha tsohle tsa ho fanoa ka mokhoa oa ho fanoa ka moamoheli ka tloaelo li bulehile lipontšo tse bulehileng ka ho tlohela;
3) Phetoho ea lebelo la W1-W4
Fetola lithupa ho W1-W4 ha li sebetse ka mokhoa o lumellanang oa mantsoe a lumellanang kapa a Potentimeter. Signal ea Assalog ea ho etsa qeto ea hore pheletsong ea ho Fokotsa letšoao la voltage ea 0-10, le lipente tsa potetiestimeter ho isa ho 0-5k;
4) Ts'ebetso ea tšohanyetso ea tšohanyetso
Ha konopo ea maemo a tšohanyetso e hatelloa, Tsohle tsa ho saena li-France tsa matšoao li khaotsoe 'me tlhahiso ea analog e khaotsoe; Kamora hore ho lokolloe ka tšohanyetso ho lokolloa, Lipontšo tsohle tsa switch li khutlisetsoa 'me tlhahiso ea analog e khutliselitsoe; 5 Metsotsoana e mekae ka mor'a taolo e hole e tima, Lits'enyehelo tsohle tsa ho fanoa ka mokhoa oa ho thibela le ho khaoloa le tsebiso ea analog li sa fetohe. Ha taolo ea hole e buletsoe, Lits'oants'o tsa Switch Switch li hlaphoheloa;
5) Lenaneo la paramethara (Basebelisi ba thibetsoe ho fetolela se ikhethetseng)
Mesebetsi e meng ea taolo ea hole e ka fetoloa ka paramente. Ha lipontšo w1 = 0, Tobetsa konopo ea K9-B 3 linako tse ling ka tatellano, ebe o tobetsa konopo ea K9-a 3 Linako tse ka tatellano ho kenya menu ea paramente; K9-A le senotlolo sa K9-B Ho ea leqepheng la menu ebe u khetha li-parameters; tšoara k1-a, ebe o tobetsa konopo ea K9-A / B B konopo ho fetola li-parameters;
Tsoa menu ea parameter: khetha ho boloka kapa ho se boloke, ebe o tobetsa konopo ea K1-AT ho netefatsa hore ho tsoa;
F1w1 Range: Boleng ba lipontšo tsa "skb" ho skrineng sa lipontšo, e fetoletsoeng ho 0 ho 9999;
F2W2 Range: Boleng ba pontšo ea W2 Knob ho skrineng sa lipontšo, e fetoletsoeng ho 0 ho 9999;
F3W3 SHARS: Boleng ba Consort ba W3 Knob ho skrineng sa lipontšo, e fetoletsoeng ho 0 ho 9999;
F4W4 Range: Boleng ba lipontšo tsa pontsho tsa w4 skb ho skrineng sa lipontšo, e fetoletsoeng ho 0 to 9999
F5A1 Range: Bontša boleng ba Tlhahiso ea Tlhahiso ea ADC1, 0-5000 e fetoletsoeng;
F6A2 Range: Bontša boleng ba Tlhahiso ea Tlhahiso ea ADC2, 0-5000 e fetoletsoeng;
Alamo ea hajoale: Beha boleng ba alarm bakeng sa polelo ea maikutlo ea ADC1 le ADC2. Ha Adc1 le ADC2 e feta boleng bona, Pontšo ea taolo e hole e tla ba alamo; Ha boleng bona ke 0, ts'ebetso ea alamo ha e sebetse;

8.Litšobotsi tse hole tsa motlakase

9.Boholo ba taolo ea taolo

The final interpretation right of this product belongs only to our company.

Mohlala: DH12S-P6S

Lisebelisoa tse sebetsang:wire saw/blade saw machine

2.Setšoantšo sa thepa ea sehlahisoa

Hlokomela: O ka khetha e 'ngoe ea li-antenas tse tharo. The suction cup antenna is standard by default.

3.Tlhaloso ea setsi sa taolo ea sebaka se hole

4.Selelekela sa dikahare

Main motor speed: Main: 0-50
Traveling motor speed: Line: 0-50
Maximum speed limit of automatic cutting traveling motor: Speed: 0-30
(paramethara fetohang)
Automatic cutting main motor setting current: Setting: 28 (paramethara fetohang)
Swing arm motor speed: Swing: 0-50

Lijo tse tlase tsa voltage: Better ea taolo e hole haholo e tlase haholo, please replace the battery.

Marang-rang a oa: Lets'oao le se nang mohala le sitisoa. Ka kopo sheba matla a moamoheli, e e matla hape, and restart the remote control.

5.Litaelo tsa Ts'ebetso ea Ts'ebetso ea Ts'ebetso ea Ts'ebetso

1）Turn on the remote control

Ha moamoheli a ntse a tsoela pele ho, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; Kenya libeteri tse peli tsa AA taolo ea hole, Bulela phetoho ea motlakase, and the display will show the motor speed, indicating successful startup.

2）Large motor and speed regulation/Main motor and speed regulation

Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” swinyetsa ho ya pele, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” swinyetsa ho kgutlela morao, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Rotate the “big motor” knob to adjust the speed regulation voltage of the receiver’s main motor inverter to 0-10V;

3）Traveling motor

Press and hold “Speed Adjustment Enable”, turn the “Forward/Reverse” switch to forward or backward, and the walking motor will move at a high speed of 50;

4）Swing arm motor and speed regulation

Fetola “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;

Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” Fetolela, the swing arm motor will move at a high speed of 50;

5）Travel motor speed limit adjustment

Press and hold the “speed adjustment enable” konopo le ho potoloha “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “pele/ho furalla” switch forward or backward to enter the automatic cutting mode;

7） Parameter menu (basebelisi ba thibetsoe ho e fetola ntle le tumello)

Enter the parameter menu:Ka mokhoa oa bukana, when the main motor speed is 0, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enterthe parameter menu;
Tsoa menu ea parameter: Turn the speed adjustment knob, select save or not save, and press the enable button to confirm;
Rated current: The maximum value of the main motor current, unit Ampere;
Speed adjustment parameters: Automatic cutting control parameters, kamehla 800, unit milli second,modification is prohibited;
Paramente ea thetso: When the cutting current change value exceeds this value, rapid deceleration begins, unit Ampere;
Potlakisa a1: When the cutting current is lower than the set cutting current, the speed value increased by each acceleration of the walking motor;
Thetso A2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, modification is prohibited;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, modification is prohibited;
Boholo ba hona joale: The range of main motor feedback current, unit Ampere;
Moamoheli ea phahameng: Remote control main motor speed adjustment display range;
Boholo ba ho tsamaea: Invalid parameter;
Meeli ea lebelo le tima: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Add and subtract the offset increment of the sensitivity parameter;
Set current: Ho itšeha ka ho iketsa, the threshold of main motor feedback current. If this value is exceeded,the walking motor starts to decelerate;Below this value, the walking motor starts to accelerate;yuniti: Ampere;
Idling exit: When the automatic mode starts, if the main motor feedback current is less than this value,it will be in the idling mode.If it is greaterthan this value, it will exit the idling mode and enter the cutting mode.Unit is ampere;
No-load current:When automatic mode starts, if the main motor feedback current is less than this value,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;otherwise, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;

6.Litšobotsi tse hole tsa motlakase

7.Boholo ba taolo ea taolo

The final interpretation right of this product belongs only to our company.

Mohlala: DH12S-LD

Lisebelisoa tse sebetsang:mochini o khasang ka terata

Setšoantšo sa thepa ea sehlahisoa

Hlokomela: O ka khetha e 'ngoe ea li-antenas tse tharo. The suction cup antenna is standard by default.

Tlhaloso ea setsi sa taolo ea sebaka se hole

Selelekela sa dikahare

Lebelo le leholo la koloi：S1：0-50
Lebelo la koloi e nyane: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic seha palo e kahodimodimo jwale: Kea bona: 0-35 (paramethara fetohang)
Boleng ba tokiso ea mola: Df: -99-99 (1 yuniti e ka bang 0.02V)

Lijo tse tlase tsa voltage: Better ea taolo e hole haholo e tlase haholo, please replace the battery.

Marang-rang a oa: Lets'oao le se nang mohala le sitisoa. Ka kopo sheba matla a moamoheli, e e matla hape, and restart the remote control.

Litaelo tsa Ts'ebetso ea Ts'ebetso ea Ts'ebetso ea Ts'ebetso

1.Bulela remote

Ha sesebelisoa se buletsoe, lebone la RF-LED ho moamoheli le qala ho benya;kenya libeteri tse peli tsa AA ho threceiver e remote control, Bulela phetoho ea motlakase, mme pontsho e tla bontsha lebelo la enjene, indicating successful startup.

2.Taolo e kholo ea motlakase le lebelo

Fetola “pele/ho furalla” swinyetsa ho ya pele, enjene e kholo ea moamoheli e tla bulela, mme pontsho e tla bontsha ho ya pele

Fetola “pele/ho furalla” swinyetsa ho kgutlela morao, enjene e kholo ea moamoheli e tla buleha ka morao, 'me pontšo e tla bontša ka morao

Rotate the “phetoho e kholo ea lebelo la koloi” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;

3.Small motor and speed regulation

Move the “pele/ho furalla” swinyetsa ho ya pele, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward

Fetola “Forward/Reverse” swinyetsa ho kgutlela morao, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse

4.Turn left and right

Fetola “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left

Fetola “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right

5.Turn in place

Ka mokhoa oa bukana:
Turn left in place: Press and hold the “Enable” konopo, turn the “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,mme o qale ho thinyetsa ka ho le letshehadi sebakeng;

Phetla ka ho le letona sebakeng: Press and hold the “Enable” konopo, turn the “Left/Right Turn” swinyetsa ho le letona, lebili le letšehali ho ea pele le lebili le letona le ka morao la moamoheli li buletsoe, mme moamoheli o qala ho thinya hantle sebakeng;

6.Tokiso e nyane ea lebelo la lebelo la enjene

Ka mokhoa o ikemetseng: tobetsa le ho tšoara “Enable” konopo le ho potoloha “Phetoho ea lebelo la likoloi tse nyane” ho lokisa lebelo le phahameng la koloi e nyane nakong ea ho itšeha ka boiketsetso;

7.Ho itšeha ka ho iketsa

Mohato oa pele ke ho qala enjene e kholo; mohato oa bobeli ke ho switjha mode switjha ho “Auto”; mohato oa boraro ke ho qala enjene e nyane mme skrineng se tla hlaha “Ho khaola Auto”,e bontshang hore e kene mokgweng wa ho seha o itirisang;

8. Tokiso ea mela e otlolohileng

Ha li-motor tse tsamaeang ka ho le letšehali le tse nepahetseng li ea pele le morao, lebelo le letshehadi le le letona ha le tsamaellane, mme ho tsamaya ka tsela e otlolohileng hoa kgeloha. U ka sebelisa mokhoa oa ho lokisa linear oa remote control ho lokisa lebelo la lebili le lets'ehali le le letona.;
Molao-motheo oa ho lokisa: Ka mosebetsi oa ho lokisa, lebelo la lebidi le letshehadi le hlophisitswe hantle ho fihlela lebelo le lekanang le la lebidi le letona, e le ho hokahanya lebelo la mabili le letšehali le ho felisa ho kheloha;
Mokhoa oa ts'ebetso ea ho kheloha: Ka mokhoa oa bukana, tobetsa le ho tšoara “Enable” konopo le ho potoloha “Taolo ea lebelo la likoloi tse nyane”;
Fetola ho ea ka nako ea oache ho eketsa lebelo la lebili le letšehali 'me boleng ba tokiso bo hlahang skrineng bo tla eketseha;
Fetola ka tsela e fapaneng le oache ho fokotsa lebelo la lebelo la lebili le letšehali le boleng ba tokiso bo fokotsehe;
Sebaka sa ho lokisa: Boleng ba ho lokisa -90 ho 90; matla a tokiso ea yuniti e le 'ngoe ea tokiso e ka bang 0.02V;

9. Menu ea parameter (basebelisi ba thibetsoe ho e fetola ntle le tumello)

Mesebetsi e meng ea taolo ea hole e ka fetoloa ka paramente. Ka mokhoa oa bukana, when the small motor speed S2 is 10, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enter the parameter menu;
Tsoa menu ea parameter: khetha ho boloka kapa ho se boloke, then press the enable button to confirm the exit;
Boholo ba hona joale: the operating rated current of the cutting motor is 80% of this currentt;
Parame ea taolo ea lebelo: automatic cutting control parameters, kamehla 800, modification is prohibited;
Paramente ea thetso: automatic cutting control parameter. When the cutting current change value exceeds this value,deceleration begins.
Potlakisa a1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Thetso A2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Qala ho itšeha: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Boholo ba ho tsamaea: the maximum speed of the small motor.
Ho itšeha hajoale: seta boholo ba hona joale ba motlakase o moholo bakeng sa ho itšeha ka boiketsetso. Haeba maikutlo a hona joale a feta boleng bona, it will start to decelerate.
Moeli oa Default: the default maximum speed of automatic cutting speed when turning on the machine.
Mokhoa o itekanetseng: 0, switch ea othomathike e laoloa ka bo eona; 1, the automatic switch controls the automatic IO output point.
Meeli ea lebelo le tima: the maximum speed of the small motor during automatic cutting.
Moamoheli ea phahameng: maximum speed of large motor.

Litšobotsi tse hole tsa motlakase

Boholo ba taolo ea taolo

The final interpretation right of this product belongs only to our company.

Mohlala：Atwgp-12

Sistimi ea ho ikamahanya le maemo: Tsohle tsa cnc tsa cnc le interwrab

Sehlahisoa sena ke jenereithara ea melumo e sebelisitsoeng ka lisebelisoa tsa mochini oa CNC. E sebelisitsoe ka fesheneng ka bophara ba kang CNC Mall lisebelisoa tsa CNC, CNC Lathes, litsi tsa metjeko,Cnc Sesebelisoa sa ho ithuta le mechini ea milling. Sehlahisoa sena se sebelisa phetiso e se nang mohala, Ho tlosa tlhoko ea likhoele tsa terata ea selemo, Phokotso ea theko ea liphoso e bakoang ke likhoele, Ho tlosa cable draw, Oli le tšilafalo e 'ngoe, mme o sebetsa o bonolo haholoanyane. Sephutheloana sa sehlahisoa se kenyelletsa moamoheli oa moamoheli oa elektroniki. Moamoheli o hokahane le lisebelisoa tsa CNC ka thapo ea marang-rang, le ka tsela ea elektroniki (jenele ea letsoho la letsoho) e hokahane ebile e boletsoe le moamoheli ka theknoloji ea phetisetso ea mohala. Setsebi se tšoara letsoho la letsoho ebe le tlosa mathata a khokahano ea terata ea selemo ebe e tsamaea ka bolokolohi. Bakeng sa leloko le leholo le leholo le leholo, CNC Lathes, Lisebelisoa tsa mochini oa ho tsamaea, ho itšeha le likopo tse ling, it brings great convenience and improves work efficiency.

E ts'ehetsa li-Brands tse fapaneng joalo ka mohlatlani, Mitsubishi, FanUc, Taiwanxindai, Bayuan, Fagor, Huazhong Cnc, Guangzhou cnc, and otherCNC systemsthat support handwheel interfaces.

1. Ho sebelisa mohala oa PUSO EA 433MHZ, sebaka sa ho sebetsa se se nang mohala ke 40 Metres;
2. Amohela nako ea ho feta ea nako ea nako le ho e sebelisa 32 Lisebelisoa tse se nang mohala ka nako e ts'oanang ntle le ho ama e mong le e mong;
3. Ts'ehetsa konopo ea SIRGEND STORE LE 3 Seketsoana sa konopo ea tloaelo;
4. E ts'ehetsa likhetho tsa axis ea 6-axis, 7-Axis, 8-Axis, 9-Axis, 10-Axis le 12-axis, Ka lebelo le boima ba 3 le matla a mabeli a lebelo.axis le switch, lintlha-to-supa, Khoutu ea bohlooho, jj.;
5. Ts'ehetso ea letšoao la 5v le fapaneng, 24V Fulse ea matšoao le mefuta e meng ea pulse;
6. Moralo oa tšebeliso ea matla a tlase, 2 Li-Rantaries tsa AA li ka sebelisoa bakeng sa tse fetang 1 Khoeli;
7. E ts'ehetsa antenna ka tšohanyetso, E loketse libaka tse fapaneng tsa lisebelisoa tsa mochini, Ho netefatsa botsitso ba lets'oao;

Hlokomela:
1. Leseli la boemo:
Leseli la Signal (ka ho le letšehali): Leseli la botšoao le lula le tsoela pele ha lipalesa li sebetsa, mme ha e bonese ha e sebetse;
Boholo ba alamo ea voltage (ka ho le letona): Ha Matla a betri a le tlase haholo,ho hlaba khanya e bobebe kapa ho lula;
2. Nolofatsa konopo:
Kamora ho tobetsa le ho ts'oara konopo ea ho nolofalletsa, Khetho ea Axis le matšoao a tsoang ho agnication a sebetsa, le tlhahiso ea pulse enchod e nepahetse;
3. Konopo ea tloaelo:
Konopo ntle le mosebetsi o mong le o mong o ka laola tlhahiso e lumellanang e lumellanang ho moamoheli;

Com1: Seaparo se tloaelehileng sa ho etsa sesupo sa axis; e ka hokahane le letšoao la sechaba sa 0-24v
Com2: Seriti se tloaelehileng sa 3 Kopano ea Custo ea tloaelo;

*Khetho ea Axis le ho itlhahisa e ka khethoa ka software, Coding kapa ntlha ea lintlha, Ka kopo buisana le basebetsi bakeng sa lintlha

The final interpretation right of this product belongs to our company.

Sistimi ea ho ikamahanya le maemo: Tsohle tsa cnc tsa cnc le interwrab

Sehlahisoa sena ke jenereithara ea melumo e sebelisitsoeng ka lisebelisoa tsa mochini oa CNC. E sebelisitsoe ka fesheneng ka bophara ba kang CNC Mall lisebelisoa tsa CNC, CNC Lathes, litsi tsa metjeko,Cnc Sesebelisoa sa ho ithuta le mechini ea milling. Sehlahisoa sena se sebelisa phetiso e se nang mohala, Ho tlosa tlhoko ea likhoele tsa terata ea selemo, Phokotso ea theko ea liphoso e bakoang ke likhoele, Ho tlosa cable draw, Oli le tšilafalo e 'ngoe, mme o sebetsa o bonolo haholoanyane. Sephutheloana sa sehlahisoa se kenyelletsa moamoheli oa moamoheli oa elektroniki. Moamoheli o hokahane le lisebelisoa tsa CNC ka thapo ea marang-rang, le ka tsela ea elektroniki (jenele ea letsoho la letsoho) e hokahane ebile e boletsoe le moamoheli ka theknoloji ea phetisetso ea mohala. Setsebi se tšoara letsoho la letsoho ebe le tlosa mathata a khokahano ea terata ea selemo ebe e tsamaea ka bolokolohi. Bakeng sa leloko le leholo le leholo le leholo, CNC Lathes, Lisebelisoa tsa mochini oa ho tsamaea, ho itšeha le likopo tse ling, it brings great convenience and improves work efficiency.

E ts'ehetsa li-Brands tse fapaneng joalo ka mohlatlani, Mitsubishi, FanUc, Taiwanxindai, Bayuan, Fagor, Huazhong Cnc, Guangzhou cnc, and otherCNC systemsthat support handwheel interfaces.

1. Ho sebelisa mohala oa PUSO EA 433MHZ, sebaka sa ho sebetsa se se nang mohala ke 40 Metres;
2. Amohela nako ea ho feta ea nako ea nako le ho e sebelisa 32 Lisebelisoa tse se nang mohala ka nako e ts'oanang ntle le ho ama e mong le e mong;
3. Ts'ehetsa konopo ea SIRGEND STORE LE 3 Seketsoana sa konopo ea tloaelo;
4. E ts'ehetsa likhetho tsa axis ea 6-axis, 7-Axis, 8-Axis, 9-Axis, 10-Axis le 12-axis, Ka lebelo le boima ba 3 le matla a mabeli a lebelo.axis le switch, lintlha-to-supa, Khoutu ea bohlooho, jj.;
5. Ts'ehetso ea letšoao la 5v le fapaneng, 24V Fulse ea matšoao le mefuta e meng ea pulse;
6. Moralo oa tšebeliso ea matla a tlase, 2 Li-Rantaries tsa AA li ka sebelisoa bakeng sa tse fetang 1 Khoeli;
7. E ts'ehetsa antenna ka tšohanyetso, E loketse libaka tse fapaneng tsa lisebelisoa tsa mochini, Ho netefatsa botsitso ba lets'oao;

Hlokomela:
1. Leseli la boemo:
Leseli la Signal (ka ho le letšehali): Leseli la botšoao le lula le tsoela pele ha lipalesa li sebetsa, mme ha e bonese ha e sebetse;
Boholo ba alamo ea voltage (ka ho le letona): Ha Matla a betri a le tlase haholo,ho hlaba khanya e bobebe kapa ho lula;
2. Nolofatsa konopo:
Kamora ho tobetsa le ho ts'oara konopo ea ho nolofalletsa, Khetho ea Axis le matšoao a tsoang ho agnication a sebetsa, le tlhahiso ea pulse enchod e nepahetse;
3. Konopo ea tloaelo:
Konopo ntle le mosebetsi o mong le o mong o ka laola tlhahiso e lumellanang e lumellanang ho moamoheli;

Com1: Seaparo se tloaelehileng sa ho etsa sesupo sa axis; e ka hokahane le letšoao la sechaba sa 0-24v
Com2: Seriti se tloaelehileng sa 3 Kopano ea Custo ea tloaelo;

*Khetho ea Axis le ho itlhahisa e ka khethoa ka software, Coding kapa ntlha ea lintlha, Ka kopo buisana le basebetsi bakeng sa lintlha

The final interpretation right of this product belongs to our company.