Kopo e ikhethang ea semmuso – Theknoloji ea wixhc https://www.wixhc.cn Moetapele oa indasteri Wed, 05 Nov 2025 06:21:59 +0000 st hourly 1 https://wordpress.org/?v=6.8.3 E nang le mochini oa lekhetho oa letsoho https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Selelekela sa Product

Lekhotla la Elektroniki le sebelisetsoa tataiso ea matsoho, Boemo, Khothatso ea Tool, le ts'ebetso e meng ho lisebelisoa tsa mochini oa cnc. Mohlala ona oa letsoho la Electronitronitronic ke pontšo ea ho hloloa e le 'nete ea Elektronic ka letsoho la elektroniki. Tsela e hokahane le sebopeho sa X13 sa SIMONE SYSTER STEME STEMPLE LE PUSO EA NORTION, 'me hokahanya limpho tsa sistimi li baloa le ho bontšoa skrineng ea LCD ea letsoho la letsoho la li-protocol puisanong ea S7. Letsoho la letsoho le ka laola khetho ea sistimi ea axis, ho phahamisa, li-button, andother signals through communication.
2.Litšobotsi tsa Ts'ebetso ea Sehlahisoa
1. Sebelisa thapo ea plug ea koluoa ​​ea likoti tse 6 mabapi le khokahano, ka bolelele ba cable ea letsoho 10 meters.
2. Skrine ea letsoho la letsoho e ka bonts'a Coorpiece Coordinece, likhokahano tsa mochini,Sekhahla sa ho fepa, Khetho ea Axis, ho phahamisa, and other information.
3. Ts'ehetso ea STOR STORE STORE, Fetolela Uo Sign Offer, and the hand wheel shutdown emergency stop is still valid.
4. Ts'ehetso 6 likonopo tsa moetlo, Fetolela IO Matšoao a IO, and can output signals to the system through IO wiring or communication.
5. Ts'ehetso 6 kapa 8 taolo ea axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. Ts'ehetso 3 kapa 4 Mekhahlelo ea taolo ea ho phahamisa, with switch IO signals that can be output to the system through IO wiring or communication.
7. Ts'ehetso ea Puseletso ea Puse, 100 ha e le, can output signals to the system through AB pulse wiring.
8. E ts'ehetsa mokhoebo oa S7 Protocol le mosana 828d, 840DSL, ONE and other model systems.

 

3. Litlhaloso tsa Lihlahisoa
Fana ka matla a ho fana ka matla a motlakase a matsoho Dc24v / 1a
Mokhethoa oa Mokhethoa oa motlakase Dc24v / 1a
Receiver Io Out Out Resigits Dc24v
Bolelele ba letsoho la letsoho le phahameng 10m
Bolelele ba cable bolelele ba cable 1m
Moamoheli ea Khoeli ea Khoeling 3m
Mocheso o sebetsang -25℃<X<55℃
Bophahamo ba Anti-Oll 1m
Motsoako oa konopo oa tloaelo 6
Mefuta ea Lihlahisoa 233*90.7*77.4(Mm)

4.Selelekela sa Ts'ebetso ea Sehlahisoa

Hlokomela:
Konopo ea tšohanyetso ea tšohanyetso:
Tobetsa konopo ea STRED STORE, 'me likarolo tse peli tsa ho emisa tsa tšohanyetso li-ungputs tse mabapi le moamoheli li tla khaoloa, and all functions of the handwheel will be invalid.
Kamora ho lokolla ho emisa ka tšohanyetso, Sebaka sa tšohanyetso sa boemo ba io ea io se koahetsoeng ke moamoheli, and all functions of the handwheel are restored.
Pontšo ea skrineng:

 

Plc: 0000 e bonts'a hore thapo ea marang-rang e sa hokahane, Plc: 1010 indicates that the network cable is successfully connected to the PLC system.
Plc: 1110 e emela ho ngola ka sistimi ea sistimi ho ea letsoho la letsoho, Plc: 0001 represents successful connection to the computer.
Senotlolo sa moetlo:
6 likonopo tsa moetlo, e mong le e mong ea lumellanang le ntlha ea uo ea uo, also connected to the system through communication.
Phetisetso ea khetho ea Axis:
The axis selection switch can switch the movement axis controlled by the handwheel.
Khopo ea ho nolofatsa:
Tobetsa le ho ts'oara konopo ka mahlakoreng ka bobeli ho kenya nako ea pulse ka ho e sisinya. Le lihlopha tse peli tse mabapi le moamoheli li nolofalletsa ho etsa lintho tsa hau tsa boitšoaro, release the enable button to enable IO output to disconnect.
Ho fetola phetoho:Phetoho ea ho ntlafatsa e ka chencha ho phahamisa
controlled by the handwheel.
⑦ Ho kopantsoe:
Tobetsa le ho ts'oara konopo ea ho nolofalletsa, sisinya ena, Emisa letšoao la pulse, and control the movement of the machine axis.
Ka tsela e ngotsoeng ka letsoho:

Cable e hokahanya ka letsoho le moamoheli, plug ea sefofane, used for handwheel power supply and communication.

5. Setšoantšo sa Lihlahisoa

6. Tataiso ea ho kenya sehlahisoa
6.1 Mehato ea ho kenya sehlahisoa
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Lebisa ho setšoantšo sa hau sa marang-rang le se bapisoang le lisebelisoa tsa hau tsa marang-rang. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Kamora ho lokisa moamoheli, Kenya setsi sa plug ea sefofane se maemong a bulang ka letsohong la letsoho, 'me u qale pheletsong e' ngoe ea motheo ka har'a interface ea letsoho. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Tekanyo ea moamoheli

6.3 Lits'oants'o tsa ho kenya li-plugs tsa lifofane

6.4 Ramoa
7.Litaelo tsa ts'ebetso ea sehlahisoa

1. Ha moamoheli a ntse a tsamaellana le pontšo ea sesupo sa ho sebetsa, hokela moamoheli k'homphieutha e nang le thapo ea marang-rang, Beha aterese e tsitsitseng ea khomphutha, 'me u sebelise Software ea sesebelisoa sa marang-rang ho beha lipara tsa marang-rang tsa ts'ebetso ea letsoho. Bakeng sa mekhoa e tobileng ea ho beha, lebisa ho “LXWGPP-erts Wiredwheel”.

2.Kamora hore moamoheli a behe, Sisteme e hloka lenaneo la lenaneo la Plc. Ka kopo sheba ka “LXWGP-ETS tse fapaneng tse sa arolelanang litsebi tsa taolo ea lipalo” and PLC program routine materials for details.

3.Kamora ho phethela litlhophiso tse kaholimo, nka moamoheli ea mochine oa motlakase oa motlakase ebe o e kenya. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.Kamora ho phethela litlhophiso tse kaholimo, nka moamoheli ea mochine oa motlakase oa motlakase ebe o e kenya. Hula thapo ea netweke ho tsoa khomphuteng 'me u e qalelle ka har'a semolao ea X. Connect the receiver power supply and pulse line.
5. Khetha khetho ea Axis: Switch the axis selection switch and select the axis you want to operate on.
6. Khetha Bonolo: Switch the magnification switch and select the magnification level you need.
7. Ho tsamaisa Axis: Tobetsa le ho ts'oara konopo ea ho nolofalletsa, Khetha phetoho ea axis, Khetha switch ea ho phahamisa, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Tobetsa 'me u ts'oare konopo ea tloaelo ho bulela konopo ea IO ea hau ho ramolao, and release the button to turn off the output.
9. Tobetsa konopo ea STRED STORE, Sebaka sa maemo a tšohanyetso a io se tsamaeang le moamoheli se tla felisoa, Ts'ebetso ea letsoho le matsoho e tla holofala, Lokolla konopo ea SIRGEND STORE, Kameho ea tšohanyetso ea boemo ba IO e tla koaloa, and the handwheel function will be restored.
8.Tlhaloso ea mohlala oa sehlahisoa

① lxwgp e emela mokhoa o potileng, le sebopeho sa puisano
is an Ethernet interface.
② : Represents Siemens system specific.
③ : e emela palo ea switch ea khetho ea axis, e emela axes, mme e emela
axes.
④ : e emela mofuta oa khetho ea axis le pontsho e kholo, E emela
Letšoao la tlhahiso ea lintlha, and B represents encoded output signal.

9.Sehlahisoa se Khathatsong

10.Tlhokomelo
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Ka kopo qoba ho teba, ho oela, ho thothomela, etc. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Haeba e sa sebelisoe nako e telele, Ka kopo boloka letsoho la letsoho le hloekileng le se sireletsehileng sa ho boloka le ho tsamaisa thepa, attention should be paid to moisture and shock resistance.
11. Tlhahisoleseling ea polokeho

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Haeba boemo bofe bo sa tloaelehang bo etsahala ka letsoho, Ka kopo emisa ho e sebelisa hang-hang le ho rarolla mathata. Pele ho thulana, E thibetsoe ho sebelisa letsoho le fosahetseng hape ho qoba likotsi tsa polokeho tse bakiloeng ke liphoso tse sa tsejoeng tsa letsoho;
3. Haeba ho lokisoa ho hlokahala, Ka kopo ikopanye le moetsi. Haeba tšenyo e bakoa ke ho lokisa, Moetsi a ke ke a fana ka waranti

 

]]> Hole le mohala o se nang mohala oa cnc e otlolohileng bakeng sa litaelo tsa ts'ebetso https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Selelekela sa Product

The dedicated wireless remote contro for CNC vertical lathes is used for manual guidance, Boemo, tool setting, and other operations on CNC vertical machine tools. Sehlahisoa sena se amohela theknoloji ea phetisetso e se nang mohala, eliminating the need for traditional spring wirae connections, Ho fokotsa liphoso tsa lisebelisoa tse bakoang ke likhoele, and eliminating the disadvantages of cable dragging and oil stains, making operation more convenient. It is widely applicable to various vertical lathes such as CNC vertical lathes, single-column vertical lathes, and double-column vertical lathes.It can also be adapted to a variety of CNC systems on the market, joalo ka mohlaseni,
Mitsubishi, FanUc, and Syntec.

2. Litšobotsi tsa Ts'ebetso ea Sehlahisoa

1. Adopting 433 MHz wireless communication technology, with a wireless operating distance of 40 meters.
2.Adopting automatic frequency hopping function and using 32 sets of wireless remote controllers simultaneously, without affecting each other.
3. Ts'ehetso ea STOR STORE STORE, switch IO signal output.
4. Ts'ehetso 2 likonopo tse ratoang, with switch-type IO signal output.
5. Ts'ehetso -2 axis control.
6. Supports 3-level magnification control.
7. Support the enable button function, which can output on/off IO signals and control axis selection, multiplying factor, le ho thula.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Supports pulse encoder, with a specification of 100 pulses per revolution.
3. Litlhaloso tsa Lihlahisoa
Operating voltage and current of wireless remote
3V/14MA
Battery specifications 2 AA alkaline batteries, size 5
Low voltage alarm range of wireless remote < 2.3V
Mokhethoa oa Mokhethoa oa motlakase DC5V-24V/A
Receiver emergency stop output load range AC125V-1A/DC30V-2A
Receiver enable output load range
AC125V-1A/DC30V-2A
Receiver custom button output load range DC24V/50mA
Receiver axis selection output load range DC24V/50mA
Receiver magnification output load range DC24V/50mA
Transmission power of handheld terminal
15dBm
Receiver receiving sensitivity -100dBm
Wireless communication frequency 433MHz frequency band
Wireless communication distance Barrier free distance of 40 Metres
Operation temperature -25℃ < X < 55℃
Anti fall height 1 (Meter)
Custom button quantity 2
4. Product Function Introduction



Lintlha:

① Pulse encoder:
Tobetsa le ho ts'oara konopo ea ho nolofalletsa, sisinya ena, Emisa letšoao la pulse,and control the movement ofthe machine axis.
② Enable button:
Press either enable button on either side, and the two sets of enable IO outputs on the receiver will conduct. Release the enable button to disconnect the enable IO output; And before switching the axis selection magnification and shaking the handwheel,the enable button needs to be held down to be effective; This function can be cancelled through configuration software.

③ Indicator lights:
Left side light: power on light,the handwheel uses the axis to select OFF for power on, and this light stays on after power on;
Middle light: a signal light that lights up when operating any function ofthe handwheel, and does not light up when there is no operation;
Right side light: Boholo ba alamo ea voltage, low battery level,this lightflashes or stays on, battery needs to be replaced.

④ Emergency stop button:
Tobetsa konopo ea STRED STORE, 'me likarolo tse peli tsa ho emisa tsa tšohanyetso li-ungputs tse mabapi le moamoheli li tla khaoloa, and all functions of the handwheel will be invalid.

⑤ Magnification switch:
Press and hold the enable button to switch the magnification switch, which can switch the magnification controlled by the handwheel.

⑥ Axis selection switch (Phetoho ea Matla):
Press and hold the enable button to switch the axis selection switch, which can switch the movement axis controlled by the handwheel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Custom button:
Two custom buttons, each corresponding to an IO output point on the receiver.

5. Setšoantšo sa Lihlahisoa

6. Tataiso ea ho kenya sehlahisoa
6.1 Mehato ea ho kenya sehlahisoa

1. Install the receiver into the electrical cabinet through the buckle on the back, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Lebisa ho setšoantšo sa hau sa marang-rang le se bapisoang le lisebelisoa tsa hau tsa marang-rang. Connect the equipment to the receiver via cables.
3.After the receiver is properly fixed, Antena e nang le moamoheli e lokela ho hokahanngoa, and the outer end of the antenna should be installed or placed outside the electrical cabinet. Ho khothalletsoa ho e beha kaholimo ho cabinet ea motlakase bakeng sa phello e ntle ka ho fetisisa. It is prohibited to leave the antenna unconnected or place it inside the electrical cabinet, as this may result in the signal being unusable.
4. Qetellong, turn on the power switch of the handwheel, and you can operate the machine remotely using the handwheel.

6.2 Tekanyo ea moamoheli

6.3 Ramoa

7. Litaelo tsa ts'ebetso ea sehlahisoa
1. Power on the machine and the receiver. The receiver’s working indicator light flashes. Install the battery in the wireless electronic handwheel, secure the battery cover, mme
turn on the power switch of the wireless electronic handwheel. The handwheel’s battery level indicator light is on.
2. Kgetha Axis: Tobetsa le ho ts'oara konopo ea ho nolofalletsa, toggle the axis selection switch, and select the axis you want to operate.
3. Khetha Bonolo: Tobetsa le ho ts'oara konopo ea ho nolofalletsa, toggle the magnification switch,and select the desired magnification level.
4. Ho tsamaisa Axis: Tobetsa le ho ts'oara konopo ea ho nolofalletsa, Khetha phetoho ea axis, Khetha switch ea ho phahamisa, and then rotate the pulse encoder. Rotate clockwise to move the
positive axis and counterclockwise to move the negative axis.
5. Tobetsa le ho tšoara konopo ea tloaelo, and the corresponding button IO output of the receiver will be turned on. Release the button, and the output will be turned off.
6. Tobetsa konopo ea STRED STORE, Sebaka sa maemo a tšohanyetso a io se tsamaeang le moamoheli se tla felisoa, Ts'ebetso ea letsoho le matsoho e tla holofala,Lokolla konopo ea SIRGEND STORE, Kameho ea tšohanyetso ea boemo ba IO e tla koaloa, and the handwheel function will be restored.
7. Haeba maqhubu a letsoho ha a sebetse nako e telele, it will automatically enter sleep mode to reduce power consumption. Ha e sebelisoa hape, the handwheel can be activated by pressing the enable button.
8. Haeba li-handheel ha li sebelisoe nako e telele, it is recommended to switch the handwheel shaft to the OFF position, tima matla a matsoho, and extend the battery life.

8. Tlhaloso ea mohlala oa sehlahisoa

① :ZTWGP represents the appearance style
②：Ho pullisa litekanyetso:
01: Indicates that the pulse output signal is A, B; Volse voltage 5v; pulse quantity 100PPR.
02：Indicating thatthe pulse output signals are A and B; Pulse voltage 12V; pulse quantity 100PPR.
03：Indicating thatthe pulse output signals are A, B, A -, B -; Volse voltage 5v; pulse quantity 100PPR.
04：E supa tlhahiso e tlase ea potoloho e bulehileng, ka lipontšo tsa ho hlahisoa ha ho hlahisoa ha li-le b;The number of pulses is 100PPR.
05：E bonts'a tlhahiso e phahameng ea Pnp PRNP, ka lipontšo tsa ho hlahisoa ha ho hlahisoa ha li-le b; The number of pulses is 100PPR.
③：Representing the number of axis selection switches, 2 e emela 2 axes.
④：Represents the type of axis selection switch signal, E emela lets'oao la ho kenya lintlha, and B represents encoded output signal.
⑤：Represents the type of multiplication switch signal, E emela lets'oao la ho kenya lintlha, and B represents encoded output signal.
⑥：Represents the number of custom buttons, 2 e emela 2 custom buttons.
⑦：Represents the power supply for the system handwheel, mme 05 represents 5V power supply.
⑧：L represents the left column (left knife holder), and R represents the right column (right knife holder).

9.Solution to Product Malfunctions

10. Product maintenance

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Ka kopo qoba ho teba, ho oela, ho thothomela, etc. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Haeba e sa sebelisoe nako e telele, Ka kopo boloka letsoho la letsoho le le leng sebakeng se hloekileng le se sireletsehileng. Nakong ea polokelo le lipalangoang, attention should be paid to moisture and shock resistance.

11. Tlhahisoleseling ea polokeho

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Haeba ho lokisoa ho hlokahala, Ka kopo ikopanye le moetsi. Haeba tšenyo e bakoa ke ho lokisa, Moetsi a ke ke a fana ka waranti

]]> Facuc e inehetseng ea mohala oa mohala https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 Mots'eanong 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Selelekela sa Product

Lesela le se nang mohala la mohala oa mohala o sebelisetsoa tataiso ea matsoho, Boemo, Khothatso ea Tool,le ts'ebetso e meng ho lisebelisoa tsa mochini oa cnc. Sehlahisoa sena se amohela theknoloji ea phetisetso e se nang mohala, Ho felisa khokahano ea terata ea setso ea selemo, Ho fokotsa liphoso tsa lisebelisoa tse bakoang ke likhoele, Ho felisa mathata a likhahla tse hulang le lithipa tsa oli, mme o sebetsa o bonolo haholoanyane. Mohlala ona oa letsoho la mohala oa mohala oa mohala ke lebitso la inehetseng bakeng sa tsamaiso ea fancuc. Lichelete tsa sonction tsa FanUC li bontšoa ka nako ea nnete skrineng ea letsoho la letsoho la li-io-Link Protocol, le khetho ea axis,ho phahamisa, le matšoao a konopo a hokahantsoe ka kotloloho ho sistimi ka protocol ea Io-Link, reducing wiring.

2. Likarolo tsa sehlahisoa
1. Amopi 43MMZ ea Technology ea Puisano ea Marang-rang, Sebaka sa Ts'ebetso e se nang mohala ke 40 Metres;
2. Bala ts'ebetso ea nako ea nako e fetang ea nako, Sebelisa 32 Litefiso tsa meqathatso e hole le mohala ka nako e le 'ngoe ntle le ho amana;
3. Ts'ehetso ea STOR STORE STORE, Fetolela Uo Sign Offer, e hokahantsoeng le sistimi ka io wiring;
4. Ts'ehetso 4 likonopo tsa moetlo, Fetolela IO Sign, Letšoao la tlhahiso tsamaisong ka protocol ea Io-Link Protocol;
5. Ts'ehetsa konopo e potlakileng ea Mokhahlelo + le konopo -, Tobetsa le ho ts'oara konopo ho nka sebaka sa matsoho ho tsamaisa mochini;
6. Ts'ehetsa taolo ea 6-axis, Fetolela IO Sign, Letšoao la tlhahiso tsamaisong ka protocol ea Io-Link Protocol;
7. Ts'ehetso 1x,10x, 1005 Taolo ea X . Ts'ehetso ea Switch L0 Signal, le lipontšo tsa ka tlung ho sistimi ka io-Link Protocol;
8. Ts'ehetso ea Khoebo ea Khoebo, hokela tsamaisong ka io wiring, le ho laola ho kenyelletsa ho thusa ka nako e le 'ngoe;
9. Ts'ehetso ea Puseletso ea Puse, 100 Ho putlama / selikalikoe, Ho fihlella sistimi mpg handheel ka letsoho ka ho kenya letsoho ho kopaneng;

3.Litlhaloso tsa Lihlahisoa

4.Likarolo tsa sehlahisoa

Lintlha:
Konopo ea Setokelo sa ":
Tobetsa konopo ea STRED STORE, Ho emisa maemo a mabeli a tšohanyetso, Mesebetsi eohle ea matsoho ha e sebetse.ABThoa ha ho lokolloe ka tšohanyetso, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

Pontsho ea ②screen:

③custom button:
4 likonopo tsa moetlo, konopo e 'ngoe le e' ngoe e lumellana le ntlha ea uo ea IO ea IO, e hokahane le sistimi ka iolink. Ka kakaretso, the ~ button is set as a high-speed button.
Switch ea ho khetholla ea ④oaxis:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
Li-Button tsa ⑤Shortcut:
Tobetsa konopo e khuts'oane "+" ho tsamaisa mochini pele, ebe o tobetsa konopo e khuts'oanyane "-" ho tsamaisa mochini hampe. This can replace turning the hand wheel to move the machine.
Konopo e molemo:
Tobetsa le ho ts'oara le leng la li-button tse thusang ka mahlakoreng ka bobeli le ho sisinya nako ea ho putlama ho sebetsa. Le lihlopha tse peli tsa ho nolofalletsa IO li-udputs tse mabapi le moamoheli li buloa. Release the enable button and the enable IO output is disconnected.
Switch ea ⑦ratio:
Switching the magnification switch can switch the magnification of handwheel control.
Khokahano encerder:
Tobetsa le ho ts'oara konopo ea ho nolofalletsa le ho sisinya nako ea pulse ho romella pulse
signal to control the movement of the machine axis.
Phetoho ea ⑨power:
Handwheel power button.

5.Setšoantšo sa thepa ea sehlahisoa

6.Tataiso ea ho kenya sehlahisoa

6.1 Mehato ea ho kenya sehlahisoa

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Sheba setšoantšo sa rona sa ratoang, E bapisoa le eona le lisebelisoa tsa hau tsa marang-rang, mme o hokela
the equipment to the receiver via cables.
3. Kamora hore moamoheli a behe, Antena e nang le moamoheli e lokela ho hokahanngoa,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Ho khothalletsoa ho e beha kaholimo ho cabinet ea motlakase bakeng sa phello e ntle ka ho fetisisa. Ke
e thibetsoe ho tlohela antenna e sa hlalosoang kapa e beha antenna ka har'a khabinete ea motlakase,
which may cause the signal to be unusable.
4.Qetellong, Bulela Switch ea letsoho la letsoho la matsoho, 'me u ka sebelisa mochini ka
handwheel remote control.

6.2 Tekanyo ea moamoheli

6.3 Ramoa

7. Tlhokomelo le Tlhokomelo

1. Ka kopo e sebelise tikolohong e omeletseng e nang le mocheso o tloaelehileng le khatello ea maikutlo a ho holisa
Bophelo ba tšebeletso;
2. Ka kopo qoba ho e sebelisa tikolohong e sa tloaelehang joalo ka ha pula le likhoho tsa metsi li atolosa
Bophelo ba Tšebeletso;
3. Ka kopo boloka ponahalo ea ho hloloa ka letsoho ho hloekisetsa bophelo ba tšebeletso;
4. Ka kopo qoba ho teba, ho oela, ho thothomela, etc. Ho thibela tšenyo ea likarolo tsa ka pele
ka hare ho letsoho kapa ho baka liphoso tse hlakileng;
5. Haeba e sa sebelisoe nako e telele, Ka kopo boloka letsoho la letsoho le le leng sebakeng se hloekileng le se sireletsehileng;
6. Pay attention to moisture and shock during storage and transportation.

8. Tlhahisoleseling ea Ts'ireletso

1. Ka kopo bala litaelo ka hloko pele li sebelisoa. Litsebi tse se nang litsebi li thibetsoe ho tsoa
operating.
2. Ka kopo khutlisetsa betri ka nako eo betri e tlase haholo ho qoba liphoso tse bakoang ke
insufficient power causing the handwheel to be unable to operate.
3. Haeba ho lokisoa ho hlokahala, Ka kopo ikopanye le moetsi. Haeba tšenyo e bakoa ke boitokisetso,
the manufacturer will not provide warranty.

]]> Morekisi oa elektronike oa mohala oa mohala oa mohala oa " https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 Mots'eanong 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Introduction of remote control

a.Product Composition
Siemens real-time coordinate display wireless electronic handwheel consists of two parts: Elektroniki Handheel + receiver;

b.Characteristics

*Ts'ehetsa Mosomi PLc: S700 / -300 / -1200；Ts'ehetsoa pontšo ea nako ea 'nete ea Sensesi ea Sense e hokahanyang melao；
*Sebaka sa phepelo ea mohala se bulehile 40 Metres, automatic frequency hopping technology, can use 32 sets of equipment at the same time;
*The electronic handwheel is powered by 2 AA batteries and can be used for more than 30 matsatsi;
*The receiver is equipped with an external antenna to enhance the signal and is easy to install;
*Electronic handwheel support: e le 'ngoe ea 100ppy 、Sesebelisoa se le seng sa 6-Speed ​​Axis 、 Sesebelisoa se le seng sa lebelo la 3;
*Electronic handwheel supports 6 likonopo tsa moetlo, corresponding to Siemens PLC address, e ka lokisoang ka bolokolohi;

*6 Li-button tsa tloaelo li ka laola 6 Fetolela Outputs;
*The display screen displays the PLC corresponding register coordinate value in real time, and supports 6-axis display of real-time coordinates.

2.Application field

Programmable CNC remote control is widely used in various CNC fields such as laser engraving system, Mochini oa CNCA Carting, Setsi sa CNC ho na le CNC, gantry machine tool, jj.

3. Introduction to the working principle

1）Electronic handwheel is connected to PLC via Ethernet receiver

a.The handwheel transmits the key data wirelessly to the receiver, and the receiver writes the keys through the network cable PLC system DB area; the receiver reads the data to be displayed from the designated DB area, and then returns the data to the handwheel display screen. The user can customize the base address of reading and writing DB area on the handwheel, so that the handwheel can read and write the data in the DB area of the PLC.

b. The receiver supports Siemens S7 protocol. Applies to PLC S7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

In the server mode, the user configures the PLC read and write address through the WGP-ETS configuration software;Use the PLC connection configuration tool to configure the receiver into client mode. After configuration, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Specific application

Specific application of handwheel receiver and Siemens PLC S7-200:

a. The button on the handwheel corresponds to the value of the BOOL area set by the user in the PLC. If the button of the handwheel is pressed, the corresponding BOOL area is true, and when it is released, it is false, and the base address of the BOOL area can be set through the handwheel;

b. The handwheel can read the value of the DB area in the PLC. One axis has 4 bytes of display data, mme 6 axes have a total of 24 bytes. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Appearance introduction

5.Receiver terminal definition and coding table

6.Appearance size

 

 

]]>