Ropo ea likoloi ea crawler e bone ho kuta taolo ea hole DH22s-ld-485

Tlhaloso

1. Selelekela sa Product

The remote control for automatic cutting of track car rope saw is suitable for track type rope saw
cutting machines. It uses the 485 Modbus RTU protocol to control the left and right track frequency
converters, as well as the large motor frequency conversion speed control start and the front, rear,
left and right direction controllers. And it can read the working current of the large motor frequency
converter through the 485 Modbus RTU protocol. By analyzing and comparing the current of the
large motor, the speed of the left and right tracks can be automatically adjusted in real time to
achieve automatic cutting function.

2. Litšobotsi tsa Ts'ebetso ea Sehlahisoa

1. Adopting 433MHz wireless communication technology, with a wireless operating distance of 100 Metres.
2. Amohela nako ea ho feta ea nako ea nako le ho e sebelisa 32 sets of wireless remote controllers
simultaneously, ntle le ho amana.
3. Supports all frequency converters with 485 Modbus RTU protocol, and currently compatible frequency
converter brands include:Shanghai Xielin, Fuji, Huichuan, Zhangchen, A hlasela, mme . For brands
that are not compatible, please contact us for customization.
4. Ts'ebeliso ea Matla a Tšehetsoang, Ho qala, le ho bala hona joale ha hajoale.
5. Ts'ehetso ea Letsoho le Letsoho le Letona, Ho qala, ka pele, Khutlela, taolo e setseng le e nepahetseng.
6. Ts'ehetso Mehala ea Liner ea Letsoho la Letsoho le Letona
mola o otlolohileng.
7. Support automatic cutting function of rope saw, automatically adjust the left and right track speed in
real time according to the current information of the large motor.
8. It is also compatible with direct IO output control for motor start and stop, and analog voltage output
control for motor speed.

3. Litlhaloso tsa Lihlahisoa

4. Product Function Introduction

Lintlha:
Pontsho ea ①screen:

Switch switch:

③Enable:
Likonopo tsa ho kopa, Ts'ebetso e 'ngoe e hloka ho theola konopo ea ho nolofalletsa ts'ebetso,see the instructions for each switch for details.
④Large motor switch:
Ho sebelisa switch ea lebelo la 3, Ho hula switch ena ho ka laola ho potoloha ha koloi e kholo. Kamora ho e lokolla, mmuso o tla sala, mme ho tla ba le lipontšo tse tsamaeang le skrineng. The S1↑ arrow indicates forward rotation, and the S1 ↓ arrow indicates everse rotation.
⑤small katolosong / fetola phetoho:
The small motor is equipped with a 3-speed self-locking switch in front of it. Pressing the enable button and pulling this switch can control the small motor to move forward and backward, and the corresponding display will appear on the screen.The ↑↑ arrow represents forward, and the ↓↓ arrow represents backward.
⑥ Straight line correction:
Ho sebelisa mohoebi oa kakaretso oa nako, press the enable button, turn the knob right, and display the straight line correction: Df: The left turn knob increases by 1 unit per rotation, and the left
motor speed increases by 0.1 yuniti; Fetolela strake ea leqeleng, Pontšo e otlolohileng ea mohala: Df: On the right, every turn of the knob increases by 1 yuniti, and the speed of the right motor increases
by 0.1 yuniti.
⑦Small motor turning switch:
Ho sebelisa switch ea lebelo la 3, Ha o sebetsa ka letsoho, koloi e nyane e ka laoloa ho tjeka ka ho le letšehali kapa ka ho le letona. E kile ea lokolloa, the remote control will automatically stop this action. In the forward state, when this switch is turned, the corresponding display will appear on the screen. The ←↑ arrow indicates left turn, and the ↑→ arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen. The ←↓ arrow indicates left turn, and the ↓→ arrow indicates right turn.
⑧ Bula ka lebelo le leholo la koloi:
Ho sebelisa mohoebi oa kakaretso oa nako, rotating 1 grid nako le nako, Bohlokoa ba lebelo la koloi e kholo ea koloi e ka bang 0.2 diyuniti. Fast rotation can quickly modify the speed value of the large motor.
⑨ Small motor speed regulation:
Ho sebelisa mohoebi oa kakaretso oa nako, ka mokhoa oa bukana, press the enable button and then rotate one grid at a time，the speed value of the left and right small motors changes by about 0.1 diyuniti, and quick rotation can quickly modify the speed value of the small motor.In automatic mode, press the enable button and rotate one grid at a time,the speed limit value F of the small motor changes by approximately 0.1 diyuniti. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote control power switch
Sekgari sa Pontšo se hole se buloa.

5. Setšoantšo sa Lihlahisoa

6. Tataiso ea ho kenya sehlahisoa
6.1 Mehato ea ho kenya sehlahisoa
1. Install the receiver into the electrical cabinet through the buckle on the back, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Lebisa ho setšoantšo sa hau sa marang-rang le se bapisoang le lisebelisoa tsa hau tsa marang-rang. Connect the equipment to the receiver through wires.
3. Kamora ho lokisa moamoheli, it is necessary to connect the antenna equipped with the receiver and install or place the outer end of the antenna outside the electrical cabinet. Ho khothalletsoa ho e beha kaholimo ho cabinet ea motlakase bakeng sa phello e ntle ka ho fetisisa. It is forbidden to leave the antenna unconnected or place it inside the electrical cabinet, as it may cause the signal to be unusable.
4. Qetellong, install the battery on the remote control, tiisa sekoaelo sa betri, and turn on the power switch of the remote control. After the remote control display screen shows the normal
working interface, remote control operations can be performed.

6.2 Tekanyo ea moamoheli

6.3 Ramoa

7. Litaelo tsa ts'ebetso ea sehlahisoa
7.1 Litlhophiso tsa taolo ea paramente ea paramente ea paramente
Method to enter the remote control backend parameters:

Turn the mode switch to manual mode, Fetola lebelo la koloi e nyane ho 25 on both sides, kapa 0, 10, 20, 40, 50 on all sides, and continuously turn the forward switch of the large motor up 3 times and down 3 Linako;
Sebelisa “Taolo e nyane ea lebelo la koloi” knob to flip pages, press the enable button, and then turn the small motor speed control knob to modify parameters. After modification, Fetolela leqephe ho fihlela qetellong,Khetha “Save” to exit, and press the enable button to exit the menu;
Liparamente li ka etsahala:
Boholo ba hona joale: feedback range of large motor current, set range 15-200A, kamehla 100;
Parame ea taolo ea lebelo: Automatic mode, small motor automatically accelerates faster or slower,e nyane haholo, set range 200-1500, kamehla 800;
Paramente ea thetso: Set the upper limit that allows the motor speed to change. Ha liphetoho tsa morao-rao tse fetang boleng bona, the deceleration will occur. The smaller, the faster the deceleration of the left and right motors, with a range of 05-12 and a default of 06;
Potlakisa a1: The larger the motor speed, the faster it increases, with a range of 00-06 and a default of 01;
Thetso A2: The larger the motor speed, the faster it decreases, with a range of 00-06 and a default of 02;
Netefatsa melaeli e potlakileng: Does the small motor speed regulation need to be enabled? 00 does not enable, 01 enables, default is 01;
Start self-locking: Does the large motor automatically maintain self-locking after the forward and reverse switches are released? 00 does not hold, 01 holds, kamehla 01
Maximum walking: maximum speed of left and right motors, mefuta 10-100, kamehla 50;
Ho itšeha hajoale: maximum cutting current, displayed on the screen as IC value, mefuta 15-160, kamehla 30,
corresponding to IC: 30 displayed on the screen. The upper limit of this parameter is 80% of the maximum current;
Moeli oa Default: The default small motor automatic cutting speed when turned on is within the range of 0-100, with a default of 10. The screen displays F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Automatic mode: Set to 00, the automatic/manual switch is a mode switch. Set to 01, the automatic/manual switch is set to the automatic position, the display screen shows lighting, and the automatic terminal output on the receiver is closed. When set to manual, the automatic output terminal is disconnected;
Speed limit deviation: The upper limit of the automatic cutting speed of the small motor ranges from 00 to 200, with a default of 60 and a corresponding display of 6.0 on the screen; Upper limit of display value=speed limit offset x 0.1;
Moamoheli ea phahameng: maximum speed of the large motor, mefuta 10-100, kamehla 50;
Mbus equipment (E tlameha): Selection of large motor frequency converter model, mefuta 00-03, kamehla 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicson)
Lisebelisoa tsa SBUS (E tlameha): Khetho e nyane ea motor ea cover, mefuta 00-05, kamehla 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicson)

04-Anchuanda 05-ha ho na

7.2 Paramente e maemong a khafetsa ea converner
1. Khetho: Chaena ea puisano ea puisano
2. Khetho ea mantlha ea Francy Harder: Puisano e fanoeng
3. Sekhahla sa Baud: 19200
4. Sebopeho sa data: Ha ho netefatso, Sebopeho sa data<8-N-1>
5. Aterese ea lehae: Seta sekhahla sa cequency se sephara ho 1, Khatiso ea nako e telele ea nako e telele ho 2, mme
the large motor frequency converter to 3
7.3 Litaelo tsa Ts'ebetso ea taolo ea taolo
1. Matla ho Mochine, Bulela taolo ea hole, enter the remote control backend, set the
remote control backend parameters, mainly setting the small motor and large motor frequency
converter models: (tlola mohato ona haeba moetsi oa mochini o se a e hlophisitse);
2. Beha liparamethara tsa sepolesa sa maqhubu a Frequency (skip this step if the machine manufacturer
has already set it);
3. Beha taolo ea hole ho mode ea puo, and then use the remote control to move the machine to
the working position;
4. Ka mokhoa oa bukana, set the cutting current of the large motor to IC and the speed of the large motor
5. Fetolela mode 'me u behelle boleng ba lebelo la lebelo la FETing FUT bakeng sa koloi e nyane;
6. Ka mokhoa o ikemetseng, Fetolela switch e kholo ea koloi ho qala ho qala koloi e kholo, then turn
the small motor switch to forward or reverse, and the remote control enters automatic cutting
mode to start cutting.

8.Product Harcomhootting

9.Tlhokomelo
1. Ka kopo e sebelise tikolohong e omeletseng ka mocheso oa kamore le khatello ea ho eketsa bophelo ba bona.
2. Ka kopo qoba ho sebelisa tikolohong e sa tloaelehang joalo ka ha pula le likhoho tsa metsi li ka eketsa bophelo ba tšebeletso.
3. Ka kopo boloka sebaka sa battori le sebaka sa li-shrapnel tsa "tšepe se hloekile.
4. Ka kopo qoba ho senya taolo ea hole ka lebaka la ho teneha le ho oela.
5. Haeba e sa sebelisoe nako e telele, please remove the battery and store the remote control and battery in a clean
and safe place.
6.Nakong ea polokelo le lipalangoang, Tlhokomeliso e lokela ho lefuoa ho mongobo le ho tšoha.

10. Tlhahisoleseling ea polokeho
1. Ka kopo bala litaelo ka hloko pele li sebelisoa le ho thibela litsebi tse sa sebetseng.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by
insufficient power, e ka fella ka taolo e hole ea ho se sebetse.
3. Haeba ho lokisoa ho hlokahala, Ka kopo ikopanye le moetsi. Haeba tšenyo e bakoa ke ho lokisa, the manufacturer
will not provide warranty.