1. 12 li-button, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
Taolo ea Remote e se nang Waele bakeng sa 3D Five-Axis Laser Cutting：PHB06B-LASER
Tlhaloso
1.Selelekela sa Product
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, Ts'ehetso 12 li-button, and supports real-time display of system coordinates and status.
2.Likarolo tsa sehlahisoa
1. 12 li-button, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5Tlhatlhobo ea ho tjhaja v-2a, built-in battery specifications 18650/12775mWh.
3.Molao-motheo oa ho Sebetsa
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
Hlokomela: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.Litlhaloso tsa Lihlahisoa
| Mokhethoa oa Mokhethoa oa motlakase | DC5V-DC24V |
| Button lifespan | 1,000,000 Linako |
| Mocheso oa ho sebetsa |
-25℃ < X < 55℃
|
| Bophahamo bo bolokehileng ba marotholi | 1 m |
| Receiver port | Ethernet |
| Number of buttons |
12
|
| Pontšo |
2.8-inch color screen
|
| wireless communication frequency | 433MHz band |
| Receiver sensitivity |
-100dBm
|
| Handheld transmit power |
15dBm
|
| Sebaka sa puisano se se nang mohala | 100 meters barrier-free range |
| Rechargeable Battery Specification | Rechargeable Battery Specification |
| Charging base power supply voltage | Dc24v / 1a |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.Selelekela sa Mosebetsi oa Sehlahisoa
Lintlha:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 li-button
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 pulses per phetohelo.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
9. Test Instructions
10. Installation dimensions
Tekanyo ea moamoheli
Unit: millimeters
Thickness: 29.6mm
11.Tlhokomelo le tlhokomelo
1. Ka kopo e sebelise tikolohong e omeletseng ka mocheso oa kamore le khatello ea ho eketsa bophelo ba bona.
2. Do not use sharp objects to contact the button area to extend button life.
3. Ka kopo boloka ponahalo ea remote control e hloekile ho lelefatsa bophelo ba eona ba ts'ebeletso.
4. Ka kopo, qoba ho sithabetsa, lahla, kapa ho thula, etc. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.Tlhahisoleseling ea polokeho
1. Ka kopo bala litaelo ka hloko pele li sebelisoa le ho thibela litsebi tse sa sebetseng.
2. If you repair it yourself and cause damage, the warranty will be void.
