Seteishene sa DNC Wall se hole le PHB10

Tlhaloso

1.Selelekela sa Product

The programmable CNC remote control PHB10 is suitable for wireless
Ts'ebetso ea taolo ea hole ea litsamaiso tse fapaneng tsa CNC. It supports user-defined
programming to develop button functions, and realize remote control of various
functions on the CNC system; it supports user-defined programming to develop
LED lights to light up and turn off, and realize dynamic display of system status;
the remote control comes with a rechargeable battery and supports Type-C
interface charging.

2.Likarolo tsa sehlahisoa

1. Sebelisa theknoloji ea mehala ea 433mhz, ts'ebetso e se nang mohala
hole 80 Metres;
2.Ho sebelisa ts'ebetso ea khafetsa ea ho theola ka bochabela, 32 Sets ea se se nang mohala
Likarolo li ka sebelisoa ka nako e le 'ngoe ntle le ho ama e mong le e mong;
3.Ts'ehetso 32 Lenaneo la Ts'ebetso ea Ts'ebetso;
4.Ts'ehetso 9 custom LED light display programming;
5.Support IP67 waterproof level;
6.Support standard Type-C interface charging; 5Tlhatlhobo ea ho tjhaja v-2a;
1100 mAh large capacity battery, with automatic sleep standby function; realize
ultra-long low power standby;
7.Support real-time display of power.

3.Molao-motheo oa ho Sebetsa

4. Litlhaloso tsa Lihlahisoa

5.Selelekela sa Ts'ebetso ea Sehlahisoa

Lintlha：
①Battery level display：
Lights up after power on, turns off after power off;
If the battery indicator light is only one bar and keeps flashing, it means the
battery is too low. Please replace the battery;

If the battery indicator lights are all on and the other LED lights flash back and
forth, it means the battery is very low. Please replace the battery;
If the battery indicator does not light up or go out, and the device cannot be
started by pressing and holding the power button, please replace the battery;

②Button area：32 buttons arranged in 4X8, Lenaneo le hlalosoang ke mosebelisi;

③Status LED：
COMMU: Button indicator light, lights up when the button is pressed and goes
out when the button is released; other lights are custom displays;

④Power switch：
Long press for 3 seconds to turn on, long press for 3 seconds to turn off;
⑤Charging port：
Use Type-C charger to charge, Volga voltage 5v, Hona joale 1a-2a; charging
time 3-5 lihora;

When charging, the power indicator flashes, indicating that it is charging. When
fully charged, the power indicator will show full bar without flashing.

6.Setšoantšo sa thepa ea sehlahisoa

7.Tataiso ea ho kenya sehlahisoa

1 . I nsert the USB receiver into the computer, komporo e tla etsa ka bohona
recognize and install the USB device driver without manual
2. Kenya taolo e hole ho charger. Kamora hore betri e lefisoe ka botlalo, press
and hold the power button for 3 seconds. The remote control will turn on and the power
indicator will light up, indicating that the power-on is successful.
3. Kamora matla, O ka etsa ts'ebetso efe kapa efe ea konopo. The remote control
can support dual button operation at the same time. Ha o tobetsa konopo efe kapa efe, The
COMMU light on the remote control will light up, indicating that this button is valid.

8.Litaelo tsa ts'ebetso ea sehlahisoa
Pele ho nts'etsopele ea sehlahisoa le tšebeliso, you can use the demo software we provide to
test the buttons on the remote control and the LED light on the remote control. You can
also use the demo as a reference routine for future programming development.
Pele o sebelisa software ea demo, ka kopo qhekella moamoheli oa USB ka har'a komporo,
make sure the remote controller has sufficient power, press and hold the power button to t
urn it on, ebe oa e sebelisa;
Ha konopo e ngoe le e 'ngoe ea taolo e hole e hatelloa, the test software demo will display
the corresponding key value. Kamora ho e lokolla, Bohlale ba bohlokoa ba bohlokoa bo nyamela,
indicating that the key upload is normal;
You can also select the LED light number on the test software demo, click download,
and the corresponding light number on the remote control will light up, indicating that the
LED light is downloading normally.

9.Product Harcomhootting

10. Tlhokomelo le Tlhokomelo

1. Ka kopo e sebelise tikolohong e omeletseng e nang le mocheso o tloaelehileng le khatello ea maikutlo a ho holisa
Bophelo ba Tšebeletso;
2. Se ke oa sebelisa lintho tse bohale ho ama sebaka sa sehlooho ho eketsa bophelo ba tšebeletso;
3. Ka kopo boloka sebaka sa mantlha se hloekile ho fokotsa ho roala ha senotlolo;
4. Qoba ho tetebela le ho oela ho baka tšenyo ea taolo ea hole;
5. Haeba e sa sebelisoe nako e telele, please remove the battery and store the remote control
and battery in a clean and safe place;
6. Ela hloko polelong ea mongobo nakong ea polokelo le lipalangoang.

11.Tlhahisoleseling ea polokeho

1. Ka kopo bala litaelo ka hloko pele li sebelisoa. Non-professionals are prohibited from
operating.
2. Please use the original charger or a charger produced by a regular manufacturer with the
same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing the
remote control to be unresponsive.
4. Haeba ho lokisoa ho hlokahala, Ka kopo ikopanye le moetsi. If the damage is caused by self-repair,
Moetsi a ke ke a fana ka waranti.