1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 Metres.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, Khetho ea Axis, magnification, and other information.
3. Ts'ehetso ea STOR STORE STORE, Fetolela Uo Sign Offer, and the hand wheel shutdown emergency stop is still valid.
4. Ts'ehetso 6 likonopo tsa moetlo, switch IO signals, and can output signals to the system through IO wiring or communication.
E nang le mochini oa lekhetho oa letsoho
Tlhaloso
1. Selelekela sa Product
Electronic handwheel is used for manual guidance, Boemo, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, magnification, buttons, andother signals through communication.
2.Product functional features
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 Metres.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, Khetho ea Axis, magnification, and other information.
3. Ts'ehetso ea STOR STORE STORE, Fetolela Uo Sign Offer, and the hand wheel shutdown emergency stop is still valid.
4. Ts'ehetso 6 likonopo tsa moetlo, switch IO signals, and can output signals to the system through IO wiring or communication.
5. Ts'ehetso 6 kapa 8 taolo ea axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. Ts'ehetso 3 kapa 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 ha e le, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.
3. Litlhaloso tsa Lihlahisoa
| Handwheel working power supply voltage | DC24V/1A |
| Receiver power supply voltage | DC24V/1A |
| Receiver IO output load range | DC24V |
| Hand wheel end cable length | 10m |
| Receiver end cable length | 1m |
| Receiver end network cable length | 3m |
| Operating temperature | -25℃<X<55℃ |
| Anti-fall height | 1m |
| Custom Button Quantity | 6 |
| Product dimensions | 233*90.7*77.4（mm） |
4.Selelekela sa Ts'ebetso ea Sehlahisoa
Hlokomela:
Emergency stop button:
Tobetsa konopo ea STRED STORE, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.
After releasing the emergency stop, Sebaka sa tšohanyetso sa boemo ba io ea io se koahetsoeng ke moamoheli, and all functions of the handwheel are restored.
② Screen display:
PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 likonopo tsa moetlo, each corresponding to an IO output point on the receiver, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Tobetsa le ho ts'oara konopo ea ho nolofalletsa, shake the pulse encoder, emit a pulse signal, and control the movement of the machine axis.
⑧ Handwheel cable:
Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.
5. Setšoantšo sa Lihlahisoa
6. Tataiso ea ho kenya sehlahisoa
6.1 Product installation steps
6.1 Product installation steps
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.
6.2 Tekanyo ea moamoheli
6.3 Installation dimensions of aviation plugs
6.4 Ramoa
7.Litaelo tsa ts'ebetso ea sehlahisoa
7.Litaelo tsa ts'ebetso ea sehlahisoa
1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.
2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.
3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.
4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Khetha Bonolo: Switch the magnification switch and select the magnification level you need.
7. Ho tsamaisa Axis: Tobetsa le ho ts'oara konopo ea ho nolofalletsa, Khetha phetoho ea axis, select the magnification switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Tobetsa konopo ea STRED STORE, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled, release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
8.Tlhaloso ea mohlala oa sehlahisoa
① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : e emela palo ea switch ea khetho ea axis, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.
9.Product trouble shooting
10.Tlhokomelo
1. Ka kopo e sebelise tikolohong e omeletseng ka mocheso oa kamore le khatello ea ho eketsa bophelo ba bona.
2. Ka kopo qoba ho sebelisa tikolohong e sa tloaelehang joalo ka ha pula le likhoho tsa metsi li ka eketsa bophelo ba tšebeletso.
3. Ka kopo boloka ponahalo ea makhasi a bonoa a hloekisitse bophelo ba bona.
4. Ka kopo qoba ho teba, ho oela, ho thothomela, etc. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Haeba e sa sebelisoe nako e telele, please store the handwheel in a clean and safe place.During storage and transportation, Tlhokomeliso e lokela ho lefuoa ho mongobo le ho tšoha.
11. Tlhahisoleseling ea polokeho
1. Ka kopo bala litaelo ka hloko pele li sebelisoa le ho thibela litsebi tse sa sebetseng.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Haeba ho lokisoa ho hlokahala, Ka kopo ikopanye le moetsi. Haeba tšenyo e bakoa ke ho lokisa, Moetsi a ke ke a fana ka waranti
