Tlhaloso
1.Selelekela sa Product
Wireless Remote Control e sebelisoa bakeng sa tataiso ea matsoho, Boemo, tlhophiso ea lisebelisoa le lits'ebetso tse ling tsa lisebelisoa tsa mochini oa CNC. Sehlahisoa sena se amohela theknoloji ea phetisetso e se nang mohala, Ho felisa khokahano ea terata ea setso ea selemo, Ho fokotsa liphoso tsa lisebelisoa tse bakoang ke likhoele, Ho felisa mathata a ho hula makhoaba a hulang, Lehlaba la Oli, jj., 'me e loketse haholoanyane ho sebetsa.E sebetsa haholo ho lisebelisoa tsa mochini oa CNC joalo ka litsi tsa machining tsa gantry, gantry vertical lathes, and CNC gear processing machines, and is compatible with various mainstream CNC system brands on the market, including Siemens, Mitsubishi, FanUc, Syntec and more.
2.Likarolo tsa sehlahisoa
1. E amohela theknoloji ea puisano ea waelese ea 433MHz e nang le sebaka sa ho sebetsa ka waelese sa 20 Metres.
2.Adaptive frequency hopping; 32 li-remote control tsa waelese li ka sebelisoa ka nako e le 'ngoe ntle le tšitiso.
3.Supports the emergency stop button, and the emergency stop button remains effective even after the remote control is powered off.
4.Ts'ehetso 3 likonopo tse ikhethileng tse nang le tlhahiso ea lets'oao la IO.
5.E tšehetsa taolo ea 6-axis, mme 7 ho 12-axis control is customizable.
6. E ts'ehetsa taolo ea ho holisa 3-lebelo, le taolo ea 4-speed magnification e ka etsoa ka mokhoa o ikhethileng.
7.e tshehetsa tshebetso ya konopo ya nolofalletsa, e ka hlahisang matšoao a switching IO, hape u laole khetho ea axis, kgolo le encoder.
8.E tšehetsa ho fetola mofuta oa khouto ea khetho ea axis le ho holisa ka software.
9. Supports pulse encoder with specification of 100 pulses per phetohelo.
10. Supports standard Type-C charging with 5V-2A charging specification; built-in battery
specification: 14500 / 1100Mah.
3. Litlhaloso tsa Lihlahisoa
| Working Voltage and Current of Handheld Terminal |
3.7V/20.0mA |
| Charging Battery Specification |
3.7V/14500/1100mAh
|
| Low Voltage Alarm Range of Handheld Terminal |
<3.35V |
| Receiver Power Supply Voltage |
DC5V-24V/1A |
| Receiver Emergency Stop Output Load Range |
AC125V-1A/DC30V-2A |
| Receiver Enable Output Load Range |
AC125V-1A/DC30V-2A |
| Receiver Custom Button Output Load Range |
DC24V/50mA
|
| Receiver Axis Selection Output Load Range |
DC24V/50mA |
| Receiver magnification Output Load Range |
DC24V/50mA |
| Motlakase oa ho fetisoa ka letsoho oa Terminal |
15dBm
|
| Moamoheli ea amohelang maikutlo |
-100dBm |
| Maqhubu a puisano a se nang mohala |
433Sehlopha sa maqhubu a MHz
|
| Bohole ba puisano e se nang mohala |
20 limithara mokoallo-mahala sebaka
|
| Mocheso oa ho sebetsa |
-25℃<X<55℃ |
| Bophahamo bo bolokehileng ba marotholi |
1 m
|
| Nomoro ea Likonopo tse Tloaelehileng |
3
|
| Boima ba Sehlahisoa |
546.86(g) |
| Litekanyo tsa Sehlahisoa |
200*87*72(Mm) |
4. Selelekela sa Mosebetsi oa Sehlahisoa
Lintlha:
① Konopo ea Emergency Stop:
Tobetsa konopo ea STRED STORE, lihlopha tse peli tsa liphetho tsa IO tsa setopong sa tšohanyetso ho moamoheli li tla hakolla, mme ditshebetso tsohle tsa remoutu di tla fediswa.Tlosa konopo ya ho emisa tshohanyetso, liphetho tsa IO tsa setopong sa tšohanyetso ho moamoheli li tla koaloa, le mesebetsi eohle ea remote control e tla tsosolosoa. Holim'a moo, leha remoutu e tima, ho tobetsa konopo ea ho emisa ts'ohanyetso ho ntse ho ka kenya tšebetsong tlhahiso ea tšohanyetso ea IO ea moamoheli.
② Konopo ea ho bulela:
Tobetsa konopo efe kapa efe ea bulela mahlakoreng ka bobeli, lihlopha tse peli tsa ho nolofalletsa liphetho tsa IO ho moamoheli li tla tsamaisa. Tlosa konopo ea ho nolofalletsa, 'me liphetho tsa IO tse nolofalitsoeng li tla khaotsa. Hoa hlokahala ho tobetsa le ho tšoara konopo ea ho nolofalletsa pele o khetha khetho ea axis, ho holisa kapa ho potoloha remote control hore ts'ebetso e sebetse.Ts'ebetso ena e ka hlakoloa ka software ea tlhophiso..
③ Phetoho ea Khetho ea Axis (Phetoho ea Matla):
Tobetsa le ho ts'oara konopo ea ho nolofalletsa, ebe o tobetsa konopo ea khetho ea axis ho ka laola motsamao oa axis .Tobetsa 'me u hatelle konopo ea bulela, ebe o totoba sesebelisoa sa khetho ea axis ho chencha axis e tsamaeang e laoloang ke remote control. Fetolela switjha ho tloha sebakeng sa OFF ho ea sebakeng sefe kapa sefe sa axis, 'me remoutu e tla sebetsa ka bo eona.
④ Pulse Encoder:
Tobetsa 'me u tšoare konopo ea ho bulela 'me u fetole sekh'outu sa pulse, e tla hlahisa matšoao a pulse ho laola motsamao oa mochini oa mochini.
⑤ LCD Display Screen:
5. Product Accessories Diagram
6. Tataiso ea ho kenya sehlahisoa
6.1 Mehato ea ho kenya sehlahisoa
1. Install the receiver in the electrical cabinet via the buckle on its back, or mount it inside the electrical cabinet through the screw holes at the four corners of the receiver.
2. Sheba setšoantšo sa rona sa ratoang, E bapisoa le eona le lisebelisoa tsa hau tsa marang-rang, and connect the equipment to the receiver with cables.
3. After the receiver is fixed in place, install the supporting antenna of the receiver properly. Mount or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for optimal signal performance. Do not leave the antenna uninstalled or place it inside the electrical cabinet; otherwise, signal failure may occur.
4. Qetellong, turn on the remote control power switch, then you can remotely operate the machine via the remote control.
6.2 Litekanyo tsa ho kenya Moamoheli
7. Litaelo tsa ts'ebetso ea sehlahisoa
1. Matla ho mochini le moamoheli. Letšoao la ts'ebetso ea moamoheli lea benya. Kamora hore remoutu ea elektronike e se nang mohala e tjhaje ka botlalo, e fetole ho tloha ho OFF gear ho ea ho X-axis gear, mme pontsho ya remote control e kgantsha.
2. Khetha axis : Tobetsa le ho ts'oara konopo ea ho nolofalletsa, toggle switjha ya kgetho ya axis ho kgetha axis e tla sebetswa.
3. Khetha ho holisa: Tobetsa le ho ts'oara konopo ea ho nolofalletsa, fetola switjha ea ho holisa ho khetha lisebelisoa tse holisang tse hlokahalang.
4. Motsamao oa axis: Tobetsa le ho ts'oara konopo ea ho nolofalletsa, khetha sesebelisoa sa ho khetha axis le switch ea ho holisa, ebe u potoloha sekhouto sa pulse. Fetola ho ea ka nako ea oache ho tsamaisa axis ka tsela e nepahetseng, le ho bilika ka nqane ho kgutla ho isa nqa e mpe.
5. Tobetsa le ho tšoara konopo ea tloaelo, konopo e tsamaisanang le IO tlhahiso ea moamoheli e tla bulela; lokolla konopo, mme tlhahiso e tla tima.
6. Tobetsa konopo ea STRED STORE, setopo sa tshohanyetso se tsamaelanang sa IO sa moamohedi se a kgaola mme tshebetso ya remoutu e fetoha e sa sebetseng. Tlosa konopo ea ho emisa ts'ohanyetso, tlhahiso ea tšohanyetso ea IO e koala 'me ts'ebetso ea remote control e tsosolosoa.
7. Haeba remoutu ya waelese e sa sebetse ka nako e itseng, e tla kena ka mokhoa oa ho robala ho fokotsa tšebeliso ea matla. E ka sebelisoa ka mokhoa o tloaelehileng hape ka ho tobetsa konopo ea nolofalletsa hape.
8.Haeba remoutu ea waelese e sa sebelisoe nako e telele, tima axis switch ho tima ho tima matla le ho lelefatsa bophelo ba betri
8. Tlhaloso ea mohlala oa sehlahisoa
①：UWGP e emetse setaele sa chebahalo.
②：Mekhahlelo ea Pulse Output：
01: E bontša hore lets'oao la pulse output ke A, B; Volse voltage 5v; pulse quantity 100PPR.
02: E bontša hore lets'oao la pulse output ke A, B; Pulse voltage 12V; pulse quantity 25PPR.
03: E bontša hore lets'oao la pulse output ke A, B, A -, B -; Volse voltage 5v; pulse quantity 100PPR.
04: E supa tlhahiso e tlase ea potoloho e bulehileng, ka lipontšo tsa ho hlahisoa ha ho hlahisoa ha li-le b; Palo ea likhahla ke 100PPR.
05: E bonts'a tlhahiso e phahameng ea Pnp PRNP, ka lipontšo tsa ho hlahisoa ha ho hlahisoa ha li-le b; Palo ea likhahla ke 100PPR.
③：E emela palo ea switjha ea axis; 6 e emetse 6 Axes, 7 e emetse 7 Axes, joalo joalo.
④: E emela mofuta oa lets'oao la sesebelisoa sa khetho ea axis.A e emetse lets'oao la tlhahiso ea ntlha-to-ntlha, 'me B e emetse letšoao la tlhahiso ea encoder.
⑤: E emetse mofuta oa lets'oao la phetoho ea ho holisa, 'me B e emetse letšoao la tlhahiso ea encoder.
⑥: E emela palo ea likonopo tse ikhethileng; 3 e tsamaellana le 6 likonopo tsa moetlo.
⑦: E emela phepelo ea motlakase bakeng sa taolo ea remoutu ea sistimi. 05 e emetse matla a 5V, mme 24 e emetse matla a 24V.
⑧: E emela mokhoa oa ho tjhaja mabitso. E qala ho tjhaja ka boyona ha e behilwe morao hodima setsi sa ho tjhaja.
9. Product Harcomhootting
10. Tlhokomelo le tlhokomelo
1. Ka kopo e sebelise tikolohong e omeletseng ka mocheso oa kamore le khatello ea ho eketsa bophelo ba bona.
2. Ka kopo qoba ho sebelisa libakeng tse sa tloaelehang joalo ka pula le metsi ho lelefatsa bophelo ba ts'ebeletso.
3. Ka kopo boloka ponahalo ea remote control e hloekile ho lelefatsa bophelo ba eona ba ts'ebeletso.
4. Ka kopo, qoba ho sithabetsa, lahla, kapa ho thula, etc. ho thibela tšenyo ea likarolo tse nepahetseng ka har'a taolo ea hole kapa liphoso tsa ho nepahala.
5. Haeba e sa sebelisoe nako e telele, ka kopo boloka remote sebakeng se hloekileng le se sireletsehileng.
6. Avoid moisture and shock during storage and transportation.
11. Tlhahisoleseling ea polokeho
1. Ka kopo bala litaelo ka hloko pele li sebelisoa le ho thibela litsebi tse sa sebetseng.
2. Please charge the remote control in a timely manner when the battery level is too low, to avoid malfunction and operational errors caused by insufficient power.
3. If you repair it yourself and cause damage, the warranty will be void.
