1.Peupeus

Lacak Handphonik Wireless dianggo pikeun hidayah manual, pateran, setting alat sareng
Operasi Alat CNC CNC. Produk ieu ngumpul téknologi transfer nirkabel,
Ngaleungitkeun sambungan kawat, Ngurangan gagal alat disababkeun ku kabel,
Ngaleungitkeun karugian kabel anu nyeret, noda minyak, jsb., Sareng langkung cocog
beroperasi. Hal ieu loba dianggo dina alat Mesin CNC sapertos pusat mesin maéh, gantanti
Johes nangtung, Mesin ngolah Mears CNC, sareng tiasa diadaptasi kana rupa-rupa CNC
sistem di pasar, saperti stiemen, Mitsubishi, Kipas, Syntec sareng sistem CNC anu sanés
brands.

2.Fitur produk

1. Ngadopsi téknologi komunikasi nirkabel nirkabel, Jarak operasi nirkabel nyaéta 80 méju;
2. Ngukut fungsi frekuensi otomatis, pamakean 32 Setél Kontrol Limited Wireless di
waktos anu sami tanpa mangaruhan silih;
3. Dukungan tombol Stop darurat, sareng saatos tangan dipareuman, eureun darurat
kancing masih valid;
4. Dukungan 6 tombol adat, Lebetkeun kaluaran Syso Io;
5. Ngadukung kadali 6-sumbu, 7-12 Kontrol Axis tiasa ngaropéa;
6. Ngadukung 1x,10Bulanan x, 100X ngadalikeun sareng tiasa janten 1000x;
7. Ngadukung fungsi tombol, kalepatan gentos l0 sianim. Pilihan Axis,maaanfikasi
sareng encoder.;
8. Ngarojong pilihan Axis sareng Pilihan Pilihan Eloder;
9. Ngarojong Tipe Street-C, 5Spésifikasi v-2 la 2a, spésifikasi batré diwangun
14500/1100mAh.

3.Spésifikasi produk

4.Konvolusi Produk

Kontana：
UCEM：
Nalika tombol eureun darurat dipencet, Dua Lengkah Lengkah Hoo Asput
panarima dipegatkeun, sareng sadayana fungsi handwheel teu leres. Nalika darurat
Eureun dileupaskeun, Standar Start Elputt Eutput dina panarima ditutup, sareng sadayana tangan
Fungsi disimpen; sareng saatos tangan dipareuman, Lemah Star Starput
of the receiver is still valid when the emergency stop button is pressed.

Tombol ②Ivent:
Pencét naon waé tina tombol Aktipkeun dina dua sisi, sareng dua kelompok ngaktifkeun io
Kaluaran dina panarima bakal dihurungkeun. Ngaleupaskeun tombol Aktipkeun sareng Aktipkeun Io
Kaluaran bakal dipareuman. Salaku tambahan, Anjeun kedah pencét sareng tahan tombol anu dipasang sateuacan
Ngarobih rasio pilihan sumbu sareng oyag. Fungsi ieu tiasa
canceled through the configuration software.
Pilihan Pilihan EMAXIS (saklar listrik):
Pencét sareng tahan tombol Aktipkeun sareng ngalihkeun Pilihan Pilihan Aliis pikeun Mindahkeun
pindah sumbu dikawasa ku panangan. Ngarobih saklar ieu ti off Axis sareng
turn on the handwheel power.

④pulse encoder:
Pencét sareng tahan tombol Aktipkeun sareng ngocok encoer pulsa pikeun ngirim pulsa
signal to control the movement of the machine axis.

Indikator ⑤Bation:
Tampilan kakuatan roda, Sadaya terang hartosna kakuatan pinuh, Sadaya pareum hartosna sanés
dihurungkeun atanapi teu aya kakuatan, Flid Grid Grid Kénca, nunjukkeun yén kakawasaan rendah teuing,
please charge in time.
Lampu ⑥sighal:
Upami lampu sinyal aya, Éta hartosna handmele dioperasikeun sareng sinyalna
normal; Upami lampu sinyal pareum, Éta hartosna teu aya operasi, atanapi éta dioperasikeun tapi
the wireless signal is not connected.

5.Diages aksés produk

6.Pituduh instalasi produk

6.1 Léngkah pamasangan produk
1. Pasang panarima dina kabinét listrik nganggo klip dina tonggong, atanapi pasang
the electrical cabinet using the screw holes at the four corners of the receiver.
2.Tingal diagram wiring handap kami, ngabandingkeun sareng alat dina situs, sareng sambungkeun
the equipment to the receiver via cables.
3.Saatos panarima dibereskeun, antena dilengkepan panarima kedah dihubungkeun,
sareng tungtung anteneu anteneu kedah dipasang atanapi disimpen di luar kabinét listrik. Ieu
disarankeun pikeun nempatkeun éta dina luhureun kabinét listrik pikeun pangaruh sinyal pangsaéna. Ieu
Dilarang ngantunkeun Antenna teu acan dipasang atanapi nempatkeun anténna di jero kabinét listrik,
which may cause the signal to be unusable.
4. Tungtungna, Hurungkeun switch kakuatan tangan sareng anjeun tiasa ngoperasikeun mesin ku
handwheel remote control.

6.2 Ukuran pamasaran

6.3 Panarima wiring wétan

7.Parentah operasi produk
1. Mesin ieu diangkat, panarima dipasihan, panarima indikator damel
lampu kilat, Leungeun Electronik Nirkronik ngagaduhan batre anu dipasang, panutup batré
diikat, Switch Kakuatan Powerwonik Electronik diaktipkeun, jeung
lampu kakuatan handwheel aya;
2. Pilih sumbu koordinat: Pencét sareng tahan tombol Aktipkeun, Ngarobih pilihan AXIS
saklar, sareng pilih sumbu anu anjeun hoyong beroperasi;
3. Pilih Pangabadat: Pencét sareng tahan tombol Aktipkeun, Ngarobih saklar switch,
sareng pilih tingkat medis anu anjeun peryogikeun;
4. Axis pindah: Pencét sareng tahan tombol Aktipkeun, Pilih switch pilihan sumbu, milih
saklar switch, teras clodier pulsa pulsa pikeun muterkeun sumbu anu positif
jarum jam sareng sumbu anu négatip négatip;
5. Pencét sareng tahan tombol adat, sareng témbok anu pakait io
panarima bakal dihurungkeun. Ngaleupaskeun tombol pikeun mareuman kaluaran;
6. Pencét tombol Stop darurat, anu dieusian darurat anu pakait io output
panarima dipegatkeun, Fungsi tangan ditumpurkeun, Lalu eureun darurat
kancing, Output starput Stop IO ditutup, sareng fungsi handwheel disimpen;
7. Upami handnheel teu dioperasikeun kanggo waktos waktos, Éta otomatis bakal nganggo bobo
modeu ngirangan konsumsi listrik. Nalika dianggo deui, Leungeun tiasa
diaktipkeun ku mencét tombol Aktipkeun;
8. Upami handmele henteu dianggo kanggo waktos,disarankeun pikeun mindahkeun tangan
aci kana posisi pareum, Pareuman kakawasaan leungeun, and extend the battery life.

8.Katerangan Model Produk

Asing ：DWGP ngagambarkeun gaya penampilan

② ：Parameter kaluaran pulsa:
01: Nunjukkeun yén sinyal kaluaran pulsa mangrupikeun sareng b, sareng tegangan pulss 5v; Nadi
kuantitas 100pp;
02: Nunjukkeun yén sinyal kaluaran pulsa mangrupikeun sareng b, sareng tegangan pulss nyaéta 12V; Nadi
kuantitas 25pPr;
03: Nunjukkeun yén sinyal ngumpulkeun、A-、B-； Sisan pulak 5V; Pulse quantity 1
00Pp;
04: Nunjukkeun tingkat circuit kabuka, kalayan sinyal kaluaran pulsa a sareng b; na
Jumlah pulses nyaéta 100ppr;05: Nunjukkeun kaluaran Sumber PNP luhur, Sinyal Kaluaran
aya a sareng b; kuantitas pulsa nyaéta 100ppr;
③ : ngawakilan jumlah switch Pilihan sumbu, 6 ngagambarkeun 6 sumbu, 7 ngagambarkeun 7 axis.
④ : ngawakilan jinis sinyal sinyal isyarat axis, A ngagambarkeun sinyal kaluaran titik,
B ngagambarkeun sinyal kaluaran anu disandi;

⑤ : ngawakilan jinis sinyal sinyal syukur,
A ngagambarkeun sinyal kaluaran titik, B ngagambarkeun sinyal kaluaran anu disandi;
⑥ : ngawakilan jumlah tombol adat, 6 ngagambarkeun 6 tombol adat;
⑦ : ngawakilan pasokan listrik pikeun sistem tangan, 05 ngawakilan pasokan kakuatan 5V,
jeung 24 represents 24V power supply.

9.PROPEBLEFE

10. Pangropéa sareng perawatan

1. Punten nganggo lingkungan garing dina suhu kamar sareng tekanan pikeun manjangkeun kahirupan jasa;
2. Punten nyingkahan nganggo lingkungan anu teu normal sapertos hujan sareng gelembung cai kanggo manjangkeun kahirupan;
3. Punten jaga penampilan anu bersih pikeun manjangkeun kahirupan jasa na;
4. Punten nyingkahan squeezing, ragrag, benjolan, jend. Pikeun nyegah karusakan komponén precision di jero
Kasalahan Sorwhele atanapi Asistasi;
5. Upami henteu dianggo kanggo lami, Punten nyimpenkeun tangan dina tempat anu beresih sareng aman;
6.Salila neundeun sareng angkot, attention should be paid to moisture and shock resistance.

11.Inpormasi kaamanan

1. Punten baca petunjuk sacara saksama sateuacan nganggo sareng nyaram non profésional ti operasi;
2. Nalika tingkat batré teuing rendah, Punten ngecas waktos kanggo nyegah kasalahan anu disababkeun ku henteu cekap
Batré sareng henteu mampuh beroperasi tangan;

3. Upami ngalereskeun diperyogikeun, Punten wartosan pabrik. Upami karusakan disababkeun ku perbaikan diri, the manufacturer will not provide warranty.

1.Peupeus

The programmable CNC remote control PHB06B is suitable for wireless
remote control operation of various CNC systems. It supports users to
customize programming and develop button functions to realize remote
control of various functions on the CNC system; it supports users to
customize programming and develop display content to realize dynamic
display of system status; the remote control comes with a rechargeable
battery and supports Type-C interface charging.

2.Fitur produk

1. Using 433MHZ wireless communication technology, the wireless operation
distance is 80 méju;
2. Using automatic frequency hopping function, 32 sets of wireless remote
controllers can be used at the same time without affecting each other;
3. Dukungan 12 custom button programming;
4. Support 2.8-inch screen, display content custom programming;
5. Dukungan 1 6-speed axis selection switch, which can be custom programmed;
6. Dukungan 1 7-speed magnification switch, which can be custom programmed;
7. Dukungan 1 electronic handwheel, 100 pulses/turn;
8. Ngarojong Tipe Street-C; 5Spésifikasi v-2 la 2a; battery
specification 18650/12580mWh battery.

3.Prinsip damel

4. Spésifikasi produk

5.Konvolusi Produk

Kontana：
①Power switch：
Control hand wheel to open and close

②Enable buttons on both sides：
The enabling button must be pressed to crank the hand wheel;

③Custom button area
12 buttons arranged in 3X4, user-defined programming;

④Axis selection, magnification switch
1 6-position axis selection switch, which can be customized and programmed;
1 7-position ratio switch, which can be customized and programmed

⑤ Emergency stop switch:
Handwheel emergency stop switch;

⑥Display area:
Can display current power, signal, and customized display content;

⑦Electronic hand wheel：
1 electronic handwheel, 100 pulses/turn.

⑧Charging port:

Built-in rechargeable battery, charged using Type-C charger, charging voltage 5V,
current 1A-2A; charging time 7 jam;

6.Diages aksés produk

7.Pituduh instalasi produk

1. Insert the USB receiver into the computer, the computer will automatically
recognize and install the USB device driver without manual installation;
2. Insert the remote control into the charger. After the battery is fully charged, turn
on the power switch, Hurungkeun kadali jauh, and the display shows normal, which
means the power-on is successful;
3. After powering on, you can perform any button operation. The remote control can
support dual button operation at the same time. When you press any button, a black
square will appear next to the signal on the remote control, indicating that the button
is valid.

8.Parentah operasi produk
Before product development and use, you can use the Demo software we provide to test
the buttons and display of the remote control, or use the Demo as a reference routine for
future programming development;
Before using the Demo software, please plug the USB receiver into the computer, make
sure the remote controller has sufficient power, Hurungkeun switch listrik, and then use it;
When any button on the remote control is pressed, the test software Demo will display the
corresponding key value. Saatos ngaleupaskeun, the key value display disappears, indicating that
the button upload is normal.

9.PROPEBLEFE

10. Pangropéa sareng perawatan

1. Please use it in a dry environment with normal temperature and pressure to extend
the service life;
2. Do not use sharp objects to touch the key area to extend the service life of the key;
3. Please keep the key area clean to reduce key wear;
4. Avoid squeezing and falling to cause damage to the remote control;
5. Upami henteu dianggo kanggo lami, please remove the battery and store the remote control and
battery in a clean and safe place;
6. Pay attention to moisture-proof during storage and transportation.

11.Inpormasi kaamanan

1. Please read the instructions carefully before use. Non-professionals are prohibited
from operating.
2. Please use the original charger or a charger produced by a regular manufacturer with
the same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing
the remote control to be unresponsive.
4. Upami ngalereskeun diperyogikeun, Punten wartosan pabrik. If the damage is caused by
self-repair, the manufacturer will not provide warranty.

1.Peupeus

The programmable CNC remote control PHB10 is suitable for wireless
remote control operation of various CNC systems. It supports user-defined
programming to develop button functions, and realize remote control of various
functions on the CNC system; it supports user-defined programming to develop
LED lights to light up and turn off, and realize dynamic display of system status;
the remote control comes with a rechargeable battery and supports Type-C
interface charging.

2.Fitur produk

1. Using 433MHZ wireless communication technology, the wireless operation
distance is 80 méju;
2.Using automatic frequency hopping function, 32 sets of wireless remote
controllers can be used at the same time without affecting each other;
3.Dukungan 32 custom button programming;
4.Dukungan 9 custom LED light display programming;
5.Support IP67 waterproof level;
6.Support standard Type-C interface charging; 5Spésifikasi v-2 la 2a;
1100 mAh large capacity battery, with automatic sleep standby function; realize
ultra-long low power standby;
7.Support real-time display of power.

3.Prinsip damel

4. Spésifikasi produk

5.Konvolusi Produk

Kontana：
①Battery level display：
Lights up after power on, turns off after power off;
If the battery indicator light is only one bar and keeps flashing, it means the
battery is too low. Please replace the battery;

If the battery indicator lights are all on and the other LED lights flash back and
forth, it means the battery is very low. Please replace the battery;
If the battery indicator does not light up or go out, and the device cannot be
started by pressing and holding the power button, Punten ganti batré;

②Button area：32 buttons arranged in 4X8, user-defined programming;

③Status LED：
COMMU: Button indicator light, lights up when the button is pressed and goes
out when the button is released; other lights are custom displays;

④Power switch：
Long press for 3 seconds to turn on, long press for 3 seconds to turn off;
⑤Charging port：
Use Type-C charger to charge, charging voltage 5V, current 1A-2A; charging
time 3-5 jam;

When charging, the power indicator flashes, indicating that it is charging. When
fully charged, the power indicator will show full bar without flashing.

6.Diages aksés produk

7.Pituduh instalasi produk

1 . I nsert the USB receiver into the computer, the computer will automatically
recognize and install the USB device driver without manual
2. Insert the remote control into the charger. After the battery is fully charged, press
and hold the power button for 3 seconds. The remote control will turn on and the power
indicator will light up, indicating that the power-on is successful.
3. After powering on, you can perform any button operation. The remote control
can support dual button operation at the same time. When you press any button, na
COMMU light on the remote control will light up, indicating that this button is valid.

8.Parentah operasi produk
Before product development and use, you can use the demo software we provide to
test the buttons on the remote control and the LED light on the remote control. You can
also use the demo as a reference routine for future programming development.
Before using the Demo software, please plug the USB receiver into the computer,
make sure the remote controller has sufficient power, press and hold the power button to t
urn it on, and then use it;
When any button on the remote control is pressed, the test software demo will display
the corresponding key value. Saatos ngaleupaskeun, the key value display disappears,
indicating that the key upload is normal;
You can also select the LED light number on the test software demo, click download,
and the corresponding light number on the remote control will light up, indicating that the
LED light is downloading normally.

9.PROPEBLEFE

10. Pangropéa sareng perawatan

1. Please use it in a dry environment with normal temperature and pressure to extend
the service life;
2. Do not use sharp objects to touch the key area to extend the service life of the key;
3. Please keep the key area clean to reduce key wear;
4. Avoid squeezing and falling to cause damage to the remote control;
5. Upami henteu dianggo kanggo lami, please remove the battery and store the remote control
and battery in a clean and safe place;
6. Pay attention to moisture-proof during storage and transportation.

11.Inpormasi kaamanan

1. Please read the instructions carefully before use. Non-professionals are prohibited from
operating.
2. Please use the original charger or a charger produced by a regular manufacturer with the
same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing the
remote control to be unresponsive.
4. Upami ngalereskeun diperyogikeun, Punten wartosan pabrik. If the damage is caused by self-repair,
the manufacturer will not provide warranty.