Kontrol jauh pikeun motong mobil otomatis tampilan mobil lagu anu cocog pikeun jinis skope skope
Mesin motong. Ngagunakeun éta 485 MOBBUS RTU protocol pikeun ngontrol frékuénsi lagu kénca sareng katuhu
réjakeun, kitu ogé kendali kendat frékuénsi motor ageung awal sareng payun, ngagedekeun,
Kontrol arah kénca sareng katuhu. Sareng éta tiasa maca panghargaan panghasilan ageung
konverter liwat 485 MOBBUS RTU RTU. Ku nganalisa sareng ngabandingkeun ayeuna
motor ageung, laju lagu kénca sareng katuhu tiasa otomatis disaluyukeun dina waktos nyata
achieve automatic cutting function.

2. Fitur fungsi produk

1. Ngadaptarkeun téknologi komunikasi nirkabel 433MHz, kalayan jarak operasi nirkabel tina 100 meters.
2. Ngukut fungsi frekuensi otomatis sareng dianggo 32 Setél Kontrol Limited Wireless
sakaligus, without affecting each other.
3. Ngadukung sadaya réditer 485 MOBBUS RTU RTU, sareng frekuensi anu ayeuna
merek konverter kalebet:Shanghai xielin, Fruji, Huichuan, Zhongchen, Ngajak, jeung . Pikeun merek
anu henteu cocog, please contact us for customization.
4. Ngarojong peraturan kacepetan, ngamimitian, and current reading of large motor frequency converters.
5. Ngarojaykeun frékuénsi Fréku Fréklay Disebus, ngamimitian, payun, tonggong, left and right control.
6. Ngadukung koreksi linier tina lacak frékuénsi lagu kénca sareng katuhu pikeun ngajaga mesin leumpang dina a
straight line.
7. Dukungan fungsi motong otomatis tina tali sawi, otomatis ngaluyukeun laju lagu kénca sareng katuhu
real time according to the current information of the large motor.
8. Éta ogé cocog sareng kontrol output oo anu langsung pikeun motor mimiti sareng lirén, sareng kaluaran tegangan analog
control for motor speed.

3. Spésifikasi produk

4. Konvolusi Produk

Kontana:
①screet tampilan:

Pintonan ②mode:

Antosan:
Kombinasi kombinasi, Sababaraha operasi peryogi nahan tombol Aktipkeun pikeun operasi,see the instructions for each switch for details.
Switch motor ④large:
Nganggo switch reset 3 laju, narik switch ieu tiasa ngontrol puteran anu maju sareng sabalikna tina motor ageung. Saatos ngaleupaskeun, Nagara bakal tetep, sareng bakal aya tampilan anu pas dina layar. S1 ↑ Goow nunjukkeun rotasi, and the S1 ↓ arrow indicates everse rotation.
⑤small motor maju / sabalikna:
Motor leutik dilengkepan switing mandiri 3 laju di payuneun. Mencét tombol Aktipkeun sareng narik saklar ieu tiasa ngontrol motor leutik pikeun maju sareng mundur, sareng tampilan pakait bakal némbongan dina layar.The ↑ the panah ngagambarkeun payun, and the ↓↓ arrow represents backward.
⑥ koréksi garis lempeng:
Nganggo Multiple Enroder, Pencét tombol Aktipkeun, Hurungkeun kenop katuhu, sareng pidangkeun koréksi garis lempeng: Df: Knob layar ditinggalkeun nambahan 1 unit per rotasi, sareng kénca
laju motor nambahan 0.1 satuan; Péngkolan tinggalkeun, tampilan koréksi lempeng: Df: Dibeulah katuhu, unggal péngkolan tina pnob épék ku 1 satuan, sareng laju motor katuhu naek
ku 0.1 unit.
⑦small motor moto:
Nganggo switch reset 3 laju, Nalika dioperasikeun sacara manual, motor leutik tiasa dikendalikan dibenerkeun kénca atawa ka katuhu. Sakali dileupaskeun, Kontrol jauh bakal otomatis ngeureunkeun tindakan ieu. Dina kaayaan payun, Nalika switch ieu dihurungkeun, Tampilan anu pas bakal muncul dina layar. ← @ ↑ GAMPANG GAMPANG, sareng ↑ → panah nunjukkeun langsung.When dina modeu sabalikna, Hurungkeun switch ieu sareng tampilan anu aya dina layar. Panah ← ← Panah nunjukkeun kenca, and the ↓→ arrow indicates right turn.
⑧ Perda anu ageung:
Nganggo Multiple Enroder, paling 1 Grid unggal waktos, nilai laju motor anu ageung 0.2 satuan. Fast rotation can quickly modify the speed value of the large motor.
⑨ Perda Dahareun Motor:
Nganggo Multiple Enroder, Dina modeu manual, Pencét tombol Aktipkeun sareng teras muterkeun hiji grid dina hiji waktu，nilai laju kénca kénca sareng katuhu parobihan 0.1 satuan, sareng rotasi gancang tiasa ngarobih nilai laju motor. Éntri otomatis, Pencét tombol Aktipkeun sareng muterkeun hiji grid dina hiji waktos,nilai wates laju f tina parobihan motor leutik ku kira-kira 0.1 satuan. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Switch Kontrol Datang
The remote control display screen is turned on.

5. Diagram aksésori produk

6. Pituduh instalasi produk
6.1 Léngkah pamasangan produk
1. Pasang panarima kana kabinét listrik ngalangkungan, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Tingal diagram témbok handap kami sareng ngabandingkeun sareng alat-alat anjeun. Connect the equipment to the receiver through wires.
3. Saatos ngalereskeun panarima, perlu sambungkeun antena dilengkepan sareng panarima sareng masang atanapi nempatkeun tungtung anteneu luar kabinét listrik. Disarankeun nempatkeun éta aya dina luhureun kabinos listrik pikeun pangaruh sinyal anu pangsaéna. Éta dilarang ninggalkeun anteneu anu teu kapaksa atanapi nempatkeun di jero kabinét listrik, as it may cause the signal to be unusable.
4. Tungtungna, Pasang batré dina kadali jauh, ngencang panutup batré, sareng giliran parobahan kakuatan kontrol jauh. Saatos layar tampilan jauh nunjukkeun normal
antarbeungeutna, remote control operations can be performed.

6.2 Ukuran pamasaran

6.3 Panarima wiring wétan

7. Parentah operasi produk
7.1 Setélan Parameter Kontras
Metodeu pikeun nuliskeun parameter tol:

Hurungkeun modél modeu ka modeu manual, Saluyukeun laju motor leutik 25 Dina dua sisi, atawa 0, 10, 20, 40, 50 Dina sadaya sisi, sareng terus-terusan péngkolan anu teraskeun motor 3 kali sareng ka handap 3 kali;
Pamakean “Kontrol laju motor leutik” Knob ka kaca flip, Pencét tombol Aktipkeun, teras kéngingkeun knob kendang motor leutik pikeun ngarobih parameter. Saatos modifikasi, Hurungkeun halaman ka tungtung,milih “Ngahémat” pikeun kaluar, sareng pencét tombol Aktipkeun pikeun kaluar ménu;
Parameter sapertos kieu:
Ayeuna: eupan balik tina motor anu ageung, Atur kisaran 15-200A, dituna 100;
Parameter kontrol: Modeu otomatis, motor leutik otomatis ngagancangkeun gancang atanapi langkung laun,anu langkung alit, Atur kisaran 200-1500, dituna 800;
Parameter dekilasi: Atur wates luhur anu ngamungkinkeun laju motor pikeun robih. Nalika parantos réngsé saluareun nilai ieu, deceleration bakal kajadian. Leuwih leutik, anu langkung gancang dekélasi kénca sareng katuhu, Kalayan rentang 05-12 sareng standar tina 06;
Akselerasi A1: Anu langkung ageung laju motor, anu langkung gancang ningkat, Kalayan rentang 00-06 sareng standar tina 01;
Deceleration A2: Anu langkung ageung laju motor, anu langkung gancang turun, Kalayan rentang 00-06 sareng standar tina 02;
Aktipkeun peraturan gancang: Naha pangaturan laju motor leutik kedah diaktipkeun? 00 henteu ngaktifkeun, 01 ngagambarkeun, standar nyaéta 01;
Ngamimitian ngonci: Naha motor anu ageung otomatis ngajaga konci anu ngonci saatos switch anu teraskeun sareng sabalikna anu dileupaskeun? 00 henteu tahan, 01 ngayakeun, default 01
Pondoksi maksimum: laju maksimum kénca sareng katuhu, kisaran 10-100, dituna 50;
Motong ayeuna: Kadial Motong, ditampilkeun dina layar salaku nilai IC, kisaran 15-160, default 30,
pakait sareng ic: 30 ditampilkeun dina layar. Wates luhur parameter ieu 80% tina maksimum ayeuna;
Wates laju standar: Kacapi Gancang Goréng Goréng otomatis 0-100, kalayan standar 10. Layar anu nampilkeun f1.0, and this parameter is only accurate when the maximum walking is set to 50.
Modeu otomatis: Atom 00, Switch Otomatis / Manualna mangrupikeun modeu. Atom 01, Switch Otomatis / Manual diatur kana posisi otomatis, layar tampilan nunjukkeun lampu, sareng kaluaran terminal otomatis dina panarima ditutup. Nalika disetel ka manual, terminal outtical otomatis dipegatkeun;
Simpangan wates laju: Wates luhur tina kacepetan cutting otomatis tina motor leutik 00 Pikeun 200, kalayan standar 60 sareng tampilan anu saluyu 6.0 dina layar; Wates luhur nilai tampilan = wates laju outset x 0.1;
Host maksimum: laju maksimum motor, kisaran 10-100, dituna 50;
Peralatan Mbus (wajib): Seleksi modél konflik frekuensi motor ageung, kisaran 00-03, dituna 03;
00- Shanghai xiulin 01-Fuji
02-Intur 03-Inovance (zhongchen, Robicon)
Alat sbus (wajib): Pilihan frekuensi motor leutik konflik, kisaran 00-05, dituna 03;

00- Shanghai xiulin 01-Fuji
02-Intur 03-Inovance (zhongchen, Robicon)

04-Tétuanda 05-euweuh

7.2 Setta parameter konflik frekuensi
1. Pilihan sumber paréntah: Saluran paréntah komunikasi
2. Pilihan sumber frékuénsi utama: komunikasi anu dibaca
3. Laju baud: 19200
4. Format data: Henteu aya verifikasi, format data<8-N-1>
5. Alamapan lokal: Atur kecuali frekuensi kénca ka 1, Konférénsi Frékuénsi Bener 2, jeung
the large motor frequency converter to 3
7.3 Parentah operasi kontrol
1. Kakuatan dina mesin, Hurungkeun kadali jauh, Lebetkeun backend tol, atur
Parameter Kontrol Damel, utamina netepkeun motor leutik sareng frékuénsi motor ageung
Modél konverter: (Luncat undak ieu upami produsén mesin parantos nyetél);
2. Atur parameter tina konvertif frekuensi (Luncat léngkah ieu upami produsén mesin
parantos nyetél);
3. Atur kontrol jauh ka modeu manual, teras nganggo kadali jauh pikeun mindahkeun mesin ka
posisi damel;
4. Dina modeu manual, Aturkeun kukut tina motor ageung kanggo ic sareng laju motor ageung
5. Pindah ka modeu otomatis sareng nyetél wates kacepetan anu motong;
6. Dina modeu otomatis, péngkolan switch motor ageung kanggo ngamimitian motor anu ageung, teras giliran
switch motor leutik pikeun maju atanapi ngabalikeun, sareng kontrol jauh asup kana motong otomatis
mode to start cutting.

8.PROPEBLEFE

9.Pamiaraeun
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Upami henteu dianggo kanggo lami, Punten cabut batré sareng nyimpen kendali jauh sareng batré anu bersih
and safe place.
6.Salila neundeun sareng angkot, attention should be paid to moisture and shock resistance.

10. Inpormasi kaamanan
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Punten ganti batré dina waktos anu teratur nalika batréna rendah teuing pikeun nyegah kasalahan anu disababkeun ku
Kakuatan anu cekap, which may result in the remote control being unable to operate.
3. Upami ngalereskeun diperyogikeun, Punten wartosan pabrik. Upami karusakan disababkeun ku perbaikan diri, produsén
will not provide warranty.

Model: Dh01r-4w-26k

Peralatan anu berlaku:Rupa-rupa alat industri

2.Diages aksés produk

Catetan: Anjeun tiasa milih salah sahiji tina tilu antena. The suction cup antenna is standard by default.

3.Katerangan Model Produk

Catetan:
① Seri Seri, Upami ahiran ngandung t, Éta hartosna nganggo kaluaran luar;tanpa t, it means without emergency stop output.

② henteu aya kaluaran analog, Teu aya anu kedah nyarios 0w atanapi 0r; Analogals W1, W2, W3, sareng w4 standar ka kaluaran asuransi minat (; dina waktos anu sasarengan, W1 sareng W2 tiasa dikembangkeun 2 kaluaran digital digital, Kalayan rentang 0 -5K Ohms, ½ watt; resolusi: 20 ohme. Dua poténsi Digital tiasa dianggo pikeun ngontrolkeun Waswing Was Wildage Mesin Wasding. Upami kaluaran anu digital digital diperyogikeun, user notes are required.

Input ④ANalog, mencilitas 1 Pikeun 2, nunjukkeun yén aya 1 Pikeun 2 input analog(maksimum 2 salambilan); Nalika aya input analog, Anjeun kedah ngatasi jenis perkara voltase input analog (panarima kami 0 -5V, Pangguna ogé tiasa dicatet salaku 4-20 ma atanapi 0-10v, jsb.) sareng rentang anu aya hubunganana kuantitas analog (salaku conto: mamerkeun 0-100 volt atanapi 0-1000 ora)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Fitur

1) Maksimal 26 Kaluaran relay;
2) Maksimal 4 saluran analog 0-10v (Rentang tampilan tiasa ngaropéa): dukarkeun 2 saluran overentice digentos digital;
3) 2 input analog; sareng ditampilkeun dina kadali jauh, Rentang tampilan tiasa ngaropéa
4) 1 saluran darurat darurat ngasingkeun kaluaran anu normal;
5) Ditanagaan ku 3 AA Batré, Desain konsumsi listrik rendah;
6) Jarak operasi nirkabel nyaéta 200 méju;
7) Kelas perlindungan IP67;
8) Sareng operasi pintonan cross, Ngarojong dua gigir 4 arah;
9）Back strap design.

5.Katerangan Kontrak Red

6.Tampilkeun pamenalan eusi

Nilai W1: W1: 0-1000 (parameter dikandung 0-9999)
Nilai W2: W2: 0-5000 (parameter dikandung 0-9999)
Nilai W3: W3: 0-5000 (parameter dikandung 0-9999)
Nilai W4: W4: 0-5000 (parameter dikandung 0-9999)
Tampilan iklan Adc1: 0-1000 (parameter dikandung 0-5000)
Tampilan iklan AdC2: 0-1000 (parameter dikandung 0-5000)

Téri anu low: Batré kontrol jauh teuing, please replace the battery.

Jaringan turun: Sinyal nirkabel diganggu. Punten parios kakawasaan panarima, kakuatan deui, and restart the remote control.

7.Parentah Opote Layanan Fungsi

1) Hurungkeun kadali jauh
Nalika panarima dipasangkeun, panarima indikator indikasi; Pasang dua batré AA dina kadali jauh, Hurungkeun switch listrik, sareng tampilan nunjukkeun hiji nilai,Nunjukkeun ngamimitian anu suksés. The receiver working indicator light becomes solid.
2) Pindah sareng fungsi tombol
Sakur operasi switch gambar sareng tombol dina kontrol jauh tiasa ngendalikeun sinyal parobihan anu saluyu dina panarima. Sadaya titik outpasi sinyal dina panarima biasana biasana sinyal anu kabuka sacara standar;
3) Panyaruyuan w1-w4 w4
Puterkeun knobs dina W1-W4 w4. Sinyal kaluaran analog di panen panarima ngarumuskeun kana sinyal voltase 0-10V, sareng sinyal potentiometer dina 0-5k;
4) Fungsi eureun darurat
Nalika tombol eureun darurat dipencet, Sadaya kaluaran systems mindahkeun sareng kaluaran analog didirikeun; Saatos eureun darurat dileupaskeun, Sadaya sinyal gentos disimpen sareng kaluaran analog dibereskeun; 5 detik saatos kontrol jauh dipareuman, Sadaya kaluaran slandel anu dipegatkeun sareng kuantitas analog tetep teu dirobih. Nalika kontrol jauh diaktipkeun, Pintonan syutputs syutput otomatis;
5Menu Parameter (Pangguna dilarang tina ngarobih sacara pribadi)
Sababaraha fungsi kontrol jauh tiasa disaluyukeun ngaliwatan parameter. Nalika tampilan W1 = 0, Pencét tombol K9-B 3 kali sakaligus, teras pencét tombol K9-A 3 kali sakaligus pikeun nuliskeun menu parameter; K9-A sareng K9-B kana halaman liwat ménu sareng pilih parameter; tahan k1-a, teras pencét tombol K9-A / B pikeun ngarobih parameter;
Kaluar ménu parameter: Pilih nyimpen atanapi henteu simpen, teras pencét tombol k1-a pikeun mastikeun kaluar;
Kisaran f1w1: Nilai tampilan tina W1 Knob dina layar tampilan, disaluyukeun tina 0 Pikeun 9999;
F2w2: Nilai rentang tampilan W2 Knob dina layar tampilan, disaluyukeun tina 0 Pikeun 9999;
F3w3: Nilai rentang tampilan w3 knob dina layar tampilan, disaluyukeun tina 0 Pikeun 9999;
F4w4 kisaran: Nilai tampilan tina W4 Knob dina layar tampilan, disaluyukeun tina 0 to 9999
Kisaran F5A1: Tampilkeun ADC1 Eklite Eklack, 0-5000 dilereskeun;
Kisaran f6a2: Tampilkeun ACOM ISCOM AKTOR INTARA, 0-5000 dilereskeun;
Ayeuna alarm: Setél nilai alarm pikeun AdC1 sareng ADC2 Tampilan. Nalika AdC1 sareng AdC2 ngaleuwihan nilai ieu, Tampilan kontrol jauh wasiat; Nalika nilai ieu 0, Fungsi Alarm henteu leres;

8.Campuran Electrical Kontrol

9.Ukuran kontrol jauh

The final interpretation right of this product belongs only to our company.

Model: DH12S-P6S

Peralatan anu berlaku:wire saw/blade saw machine

2.Diages aksés produk

Catetan: Anjeun tiasa milih salah sahiji tina tilu antena. The suction cup antenna is standard by default.

3.Katerangan Kontrak Red

4.Displaycontent introduction

Main motor speed: Main: 0-50
Traveling motor speed: Line: 0-50
Maximum speed limit of automatic cutting traveling motor: Speed: 0-30
(parameters adjustable)
Automatic cutting main motor setting current: Setting: 28 (parameters adjustable)
Swing arm motor speed: Swing: 0-50

Téri anu low: Batré kontrol jauh teuing, please replace the battery.

Jaringan turun: Sinyal nirkabel diganggu. Punten parios kakawasaan panarima, kakuatan deui, and restart the remote control.

5.Parentah Opote Layanan Fungsi

1）Turn on the remote control

Nalika panarima dipasangkeun, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; Pasang dua batré AA dina kadali jauh, Hurungkeun switch listrik, and the display will show the motor speed, indicating successful startup.

2）Large motor and speed regulation/Main motor and speed regulation

Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to forward, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to reverse, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Rotate the “big motor” knob to adjust the speed regulation voltage of the receiver’s main motor inverter to 0-10V;

3）Traveling motor

Press and hold “Speed Adjustment Enable”, turn the “Forward/Reverse” switch to forward or backward, and the walking motor will move at a high speed of 50;

4）Swing arm motor and speed regulation

Turn the “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;

Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” saklar, the swing arm motor will move at a high speed of 50;

5）Travel motor speed limit adjustment

Press and hold the “speed adjustment enable” button and rotate the “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “forward/reverse” switch forward or backward to enter the automatic cutting mode;

7） Parameter menu (users are prohibited from modifying it without permission)

Enter the parameter menu:Dina modeu manual, when the main motor speed is 0, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enterthe parameter menu;
Kaluar ménu parameter: Turn the speed adjustment knob, select save or not save, and press the enable button to confirm;
Rated current: The maximum value of the main motor current, unit Ampere;
Speed adjustment parameters: Automatic cutting control parameters, dituna 800, unit milli second,modification is prohibited;
Parameter dekilasi: When the cutting current change value exceeds this value, rapid deceleration begins, unit Ampere;
Akselerasi A1: When the cutting current is lower than the set cutting current, the speed value increased by each acceleration of the walking motor;
Deceleration A2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, modification is prohibited;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, modification is prohibited;
Ayeuna: The range of main motor feedback current, unit Ampere;
Host maksimum: Remote control main motor speed adjustment display range;
Pondoksi maksimum: Invalid parameter;
Laju wates: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Add and subtract the offset increment of the sensitivity parameter;
Set current: Automatic cutting, the threshold of main motor feedback current. If this value is exceeded,the walking motor starts to decelerate;Below this value, the walking motor starts to accelerate;satuan: Ampere;
Idling exit: When the automatic mode starts, if the main motor feedback current is less than this value,it will be in the idling mode.If it is greaterthan this value, it will exit the idling mode and enter the cutting mode.Unit is ampere;
No-load current:When automatic mode starts, if the main motor feedback current is less than this value,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;otherwise, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;

6.Campuran Electrical Kontrol

7.Ukuran kontrol jauh

The final interpretation right of this product belongs only to our company.

Model: DH12S-LD

Peralatan anu berlaku:crawler wire saw machine

Diages aksés produk

Catetan: Anjeun tiasa milih salah sahiji tina tilu antena. The suction cup antenna is standard by default.

Katerangan Kontrak Red

Displaycontent introduction

Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (parameters adjustable)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)

Téri anu low: Batré kontrol jauh teuing, please replace the battery.

Jaringan turun: Sinyal nirkabel diganggu. Punten parios kakawasaan panarima, kakuatan deui, and restart the remote control.

Parentah Opote Layanan Fungsi

1.Turn on the remote control

When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, Hurungkeun switch listrik, andthe display will show the motor speed, indicating successful startup.

2.Large motor and speed regulation

Turn the “forward/reverse” switch to forward, the receiver’s large motor will turn on, and the display will show forward

Turn the “forward/reverse” switch to reverse, the large motor of the receiver will turn on in reverse, and the display will show reverse

Rotate the “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;

3.Small motor and speed regulation

Move the “forward/reverse” switch to forward, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward

Turn the “Forward/Reverse” switch to reverse, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse

4.Turn left and right

Turn the “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left

Turn the “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right

5.Turn in place

Dina modeu manual:
Turn left in place: Press and hold the “Enable” kancing, turn the “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;

Turn right in place: Press and hold the “Enable” kancing, turn the “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;

6.Small motor speed limit adjustment

Dina modeu otomatis: press and hold the “Enable” button and rotate the “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;

7.Automatic cutting

The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;

8. Straight line correction

When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: Dina modeu manual, press and hold the “Enable” button and rotate the “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 Pikeun 90; correction voltage of one correction unit is about 0.02V;

9. Parameter menu (users are prohibited from modifying it without permission)

Sababaraha fungsi kontrol jauh tiasa disaluyukeun ngaliwatan parameter. Dina modeu manual, when the small motor speed S2 is 10, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enter the parameter menu;
Kaluar ménu parameter: Pilih nyimpen atanapi henteu simpen, then press the enable button to confirm the exit;
Ayeuna: the operating rated current of the cutting motor is 80% of this currentt;
Parameter kontrol: automatic cutting control parameters, dituna 800, modification is prohibited;
Parameter dekilasi: automatic cutting control parameter. When the cutting current change value exceeds this value,deceleration begins.
Akselerasi A1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Deceleration A2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Ngamimitian ngonci: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Pondoksi maksimum: the maximum speed of the small motor.
Motong ayeuna: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Wates laju standar: the default maximum speed of automatic cutting speed when turning on the machine.
Modeu otomatis: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Laju wates: the maximum speed of the small motor during automatic cutting.
Host maksimum: maximum speed of large motor.

Campuran Electrical Kontrol

Ukuran kontrol jauh

The final interpretation right of this product belongs only to our company.

Model：Atwgp-12

Sistem adaptasi: Sadaya sistem CNC kalayan antarmuka tangan

Produk ieu mangrupikeun generator pulsa anu tiasa dianggo sareng alat mesin CNC. Éta parantos dianggo di lapangan sapertos alat CNC, Lathes cnc, pusat mesin,CNC ngeusi deui sareng Mesin Milling. Produk ieu nganggo transpresifhologi nirkabel, Ngaleungitkeun kabutuhan Sastera kawatna, Gagak Reducingmipment Disababkeun ku kabel, Ngaleungitkeun kabel kabel, minyak sareng kontaminasi sanés, sareng ngadamel operasi langkung saé. Paket produk kalebet panarima sareng tangan éléktronik nirkronik. Panarima dihubungkeun ka alat CNC ngalangkungan kabel jaringan, sareng handnheel éléktronik (Larang Pulsa) disambungkeun sareng disebatkeun sareng panarima ngaliwatan téknologi transfer nirkabel. Operator nyepeng leungeunna sareng tiasa ngaleungitkeun konstrain sambungan dina kawat spring sareng mindahkeun sacara bébas. Pikeun plingét gondus ageung, Lathes cnc, Alat mesin ngarambat, motong sareng aplikasi séjén, it brings great convenience and improves work efficiency.

Ngarojong sababaraha merek sistem sapertos Siemen, Mitsubishi, Kipas, Taiwanxa, Baoyan, Fagad, Huaazhong cnc, Guangzhou Cnc, and otherCNC systemsthat support handwheel interfaces.

1. Nganggo pita frekuensi nirkabel, Jarak operasi nirkabel nyaéta 40 méju;
2. Ngukut fungsi frekuensi otomatis sareng dianggo 32 set handnheels nirkabel dina waktos anu sami tanpa mangaruhan silih;
3. Ngadukung tombol eureun darurat 3 Tombol Tombol Adat;
4. Ngarojong sababaraha pilihan Axis tina 6 Axis, 7-sumbu, 8-sumbu, 9-sumbu, 10-Axis sareng 12 sumbu, Kalayan 3-kecepatan 3-gancang sareng 4-laju, titik-to-titik, kode abu, jsb.;
5. Ngadukung sinyal puls najis 5V, 24Vals pulsa sareng jenis sinyal pulsa sanés;
6. Desain konsumsi listrik rendah, 2 Batré AA tiasa dianggo langkung ti 1 sasih;
7. Ngadukung antena paripolah éksternal, Cocog pikeun sababaraha lingkungan pamasangan aplikasi, mastikeun stabilitas sinyal;

Catetan:
1. Status Spesifikasi:
Lampu sinyal (kénca): Lampu sinyal sok aya nalika tangan anu dioperasikeun, sareng henteu hurung nalika henteu ngoperasikeun;
Lampu alarm alarem sapertos kitu (leres): Nalika kakuatan batré rendah teuing,lampu alarm segar atanapi tetep;
2. Jéntré tombol:
Saatos mencét sareng nahan tombol RETU, Sinyal Pilihan sareng Surat Pembaruan diaktipkeun, sareng kaluaran pulsa anu sah;
3. Tombol Adat:
Tombol tanpa fungsi anu tiasa ngontrol kaluaran anu cocog dina panarima;

Kom11: Terminal umum pikeun kaluaran sinyal Pilihan Axis; tiasa dihubungkeun ka sinyal 2-24v sinyal
Kom2: Terminal umum tina 3 Kaluaran Tombol Adat;

*Pilihan Axis sareng Membinat tiasa dipilih ngaliwatan parangkat lunak, coding atanapi titik-to-titik, Punten konsultasi staf kanggo detil

The final interpretation right of this product belongs to our company.

Sistem adaptasi: Sadaya sistem CNC kalayan antarmuka tangan

Produk ieu mangrupikeun generator pulsa anu tiasa dianggo sareng alat mesin CNC. Éta parantos dianggo di lapangan sapertos alat CNC, Lathes cnc, pusat mesin,CNC ngeusi deui sareng Mesin Milling. Produk ieu nganggo transpresifhologi nirkabel, Ngaleungitkeun kabutuhan Sastera kawatna, Gagak Reducingmipment Disababkeun ku kabel, Ngaleungitkeun kabel kabel, minyak sareng kontaminasi sanés, sareng ngadamel operasi langkung saé. Paket produk kalebet panarima sareng tangan éléktronik nirkronik. Panarima dihubungkeun ka alat CNC ngalangkungan kabel jaringan, sareng handnheel éléktronik (Larang Pulsa) disambungkeun sareng disebatkeun sareng panarima ngaliwatan téknologi transfer nirkabel. Operator nyepeng leungeunna sareng tiasa ngaleungitkeun konstrain sambungan dina kawat spring sareng mindahkeun sacara bébas. Pikeun plingét gondus ageung, Lathes cnc, Alat mesin ngarambat, motong sareng aplikasi séjén, it brings great convenience and improves work efficiency.

Ngarojong sababaraha merek sistem sapertos Siemen, Mitsubishi, Kipas, Taiwanxa, Baoyan, Fagad, Huaazhong cnc, Guangzhou Cnc, and otherCNC systemsthat support handwheel interfaces.

1. Nganggo pita frekuensi nirkabel, Jarak operasi nirkabel nyaéta 40 méju;
2. Ngukut fungsi frekuensi otomatis sareng dianggo 32 set handnheels nirkabel dina waktos anu sami tanpa mangaruhan silih;
3. Ngadukung tombol eureun darurat 3 Tombol Tombol Adat;
4. Ngarojong sababaraha pilihan Axis tina 6 Axis, 7-sumbu, 8-sumbu, 9-sumbu, 10-Axis sareng 12 sumbu, Kalayan 3-kecepatan 3-gancang sareng 4-laju, titik-to-titik, kode abu, jsb.;
5. Ngadukung sinyal puls najis 5V, 24Vals pulsa sareng jenis sinyal pulsa sanés;
6. Desain konsumsi listrik rendah, 2 Batré AA tiasa dianggo langkung ti 1 sasih;
7. Ngadukung antena paripolah éksternal, Cocog pikeun sababaraha lingkungan pamasangan aplikasi, mastikeun stabilitas sinyal;

Catetan:
1. Status Spesifikasi:
Lampu sinyal (kénca): Lampu sinyal sok aya nalika tangan anu dioperasikeun, sareng henteu hurung nalika henteu ngoperasikeun;
Lampu alarm alarem sapertos kitu (leres): Nalika kakuatan batré rendah teuing,lampu alarm segar atanapi tetep;
2. Jéntré tombol:
Saatos mencét sareng nahan tombol RETU, Sinyal Pilihan sareng Surat Pembaruan diaktipkeun, sareng kaluaran pulsa anu sah;
3. Tombol Adat:
Tombol tanpa fungsi anu tiasa ngontrol kaluaran anu cocog dina panarima;

Kom11: Terminal umum pikeun kaluaran sinyal Pilihan Axis; tiasa dihubungkeun ka sinyal 2-24v sinyal
Kom2: Terminal umum tina 3 Kaluaran Tombol Adat;

*Pilihan Axis sareng Membinat tiasa dipilih ngaliwatan parangkat lunak, coding atanapi titik-to-titik, Punten konsultasi staf kanggo detil

The final interpretation right of this product belongs to our company.