Mwongozo wa Maagizo ya Handwheel ya Handwheel

xia xiaoqin — Wed, 05 Nov 2025 06:13:13 +0000

1. Utangulizi wa bidhaa

Handwheel ya elektroniki hutumiwa kwa mwongozo wa mwongozo, msimamo, Ulinganisho wa zana, na shughuli zingine kwenye zana za mashine za CNC. Mfano huu wa mkono wa elektroniki ni mfano halisi. Handwheel imeunganishwa na interface ya X130 ya mfumo wa Nokia kupitia kebo ya mtandao, na kuratibu mfumo unasomwa na kuonyeshwa kwenye skrini ya LCD ya mkono kupitia mawasiliano ya itifaki ya S7. Handwheel pia inaweza kudhibiti uteuzi wa mhimili wa mfumo, ukuzaji, vifungo, andother signals through communication.

2.Vipengele vya kazi vya bidhaa

1. Tumia kebo ya kuziba ya 6-msingi wa anga kwa unganisho, na urefu wa cable ya mkono wa 10 meters.

2. Skrini ya mikono inaweza kuonyesha kuratibu za kazi za mfumo, kuratibu za mitambo,Kiwango cha kulisha, Uteuzi wa Axis, ukuzaji, and other information.

3. Kusaidia kitufe cha dharura, Badilisha pato la ishara la IO, and the hand wheel shutdown emergency stop is still valid.

4. Inasaidia 6 vifungo vya kawaida, Badili ishara za IO, and can output signals to the system through IO wiring or communication.

5. Inasaidia 6 au 8 Udhibiti wa Axis, with switch IO signals that can be output to the system through IO wiring or communication.

6. Inasaidia 3 au 4 Viwango vya udhibiti wa ukuzaji, with switch IO signals that can be output to the system through IO wiring or communication.

7. Msaada wa Pulse Encoder, 100 Pulses/Turn, can output signals to the system through AB pulse wiring.

8. Inasaidia itifaki ya Nokia S7 na Nokia 828d, 840DSL, ONE and other model systems.

3. Uainishaji wa bidhaa

Voltage ya usambazaji wa umeme wa mikono	DC24V/1A
Mpokeaji wa umeme wa mpokeaji	DC24V/1A
Mpokeaji wa pato la IO	DC24V
Urefu wa gurudumu la mwisho wa gurudumu	10m
Mpokeaji wa mwisho wa cable	1m
Mpokeaji wa urefu wa mtandao wa mpokeaji	3m
Joto la kufanya kazi	-25℃
Urefu wa kuzuia kuanguka	1m
Kiasi cha kifungo cha kawaida	6
Vipimo vya bidhaa	23390.777.4（Mm）

4.Utangulizi wa kazi ya bidhaa

Kumbuka:

Kitufe cha kuacha dharura:

Bonyeza kitufe cha dharura, Na seti mbili za matokeo ya dharura ya IO kwenye mpokeaji yatakataliwa, and all functions of the handwheel will be invalid.

Baada ya kuachilia kituo cha dharura, Pato la dharura la IO kwenye mpokeaji limefungwa, and all functions of the handwheel are restored.

Onyesho la skrini:

Plc: 0000 Inaonyesha kuwa kebo ya mtandao haijaunganishwa, Plc: 1010 indicates that the network cable is successfully connected to the PLC system.

Plc: 1110 inawakilisha uandishi mzuri wa data ya mfumo kwa mkono, Plc: 0001 represents successful connection to the computer.

③ Kitufe cha kawaida:

6 vifungo vya kawaida, kila sambamba na hatua ya pato la IO kwenye mpokeaji, also connected to the system through communication.

④ Ubadilishaji wa Uteuzi wa Axis:

The axis selection switch can switch the movement axis controlled by the handwheel.

⑤ Wezesha kitufe:

Bonyeza na ushikilie kitufe cha kuwezesha pande zote mbili ili kuamsha encoder ya kunde kwa kuitikisa. Na vikundi viwili kwenye mpokeaji huwezesha pato la IO kufanya, release the enable button to enable IO output to disconnect.

⑥ Kubadilisha Kuinua:Kubadilisha ukuzaji kunaweza kubadili ukuzaji

controlled by the handwheel.

⑦ Pulse encoder:

Bonyeza na ushikilie kitufe cha Wezesha, Shake encoder ya kunde, Toa ishara ya kunde, and control the movement of the machine axis.

Cable Handwheel cable:

Cable inayounganisha mkono na mpokeaji, Plug ya Anga, used for handwheel power supply and communication.

5. Mchoro wa Viongezeo vya Bidhaa

6. Mwongozo wa Ufungaji wa Bidhaa
6.1 Hatua za ufungaji wa bidhaa

1. Install the receiver into the electrical cabinet through the screw holes at the four corners.

2. Rejea mchoro wetu wa wiring wa mpokeaji na uilinganishe na vifaa vyako vya tovuti. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.

3. Baada ya kurekebisha mpokeaji, Weka msingi wa kuziba kwa anga kwenye nafasi ya ufunguzi wa mikono kwenye jopo, na weka mwisho mwingine wa msingi ndani ya kigeuzio cha mkono kwenye mpokeaji. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

6.2 Vipimo vya ufungaji wa mpokeaji

6.3 Vipimo vya usanidi wa plugs za anga

6.4 Mchoro wa kumbukumbu ya wiring
7.Maagizo ya Uendeshaji wa Bidhaa

1. Wakati mpokeaji anaendeshwa na taa ya kiashiria cha kufanya kazi ya mpokeaji inaangaza, Unganisha mpokeaji kwenye kompyuta na kebo ya mtandao, Weka anwani ya IP ya kompyuta, na utumie programu ya zana ya usanidi wa mtandao kuweka vigezo vya mtandao wa kazi ya mikono. Kwa njia maalum za kuweka, rejea “LXWGP-ETS Mwongozo wa Mtumiaji wa Handwheel”.

2.Baada ya mpokeaji kusanidiwa, Mfumo unahitaji kupanga mpango wa PLC. Tafadhali rejelea “Mbinu za Kuweka Mfumo wa Udhibiti wa Udhibiti wa nambari tofauti” and PLC program routine materials for details.

3.Baada ya kumaliza mipangilio hapo juu, Chukua mpokeaji kwenye baraza la mawaziri la umeme na usakinishe. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.Baada ya kumaliza mipangilio hapo juu, Chukua mpokeaji kwenye baraza la mawaziri la umeme na usakinishe. Vuta kebo ya mtandao kutoka kwa kompyuta na uiingize kwenye kigeuzi cha X cha mfumo. Connect the receiver power supply and pulse line.

5. Chagua Uteuzi wa Axis: Switch the axis selection switch and select the axis you want to operate on.

6. Chagua ukuzaji: Switch the magnification switch and select the magnification level you need.

7. Kusonga mhimili: Bonyeza na ushikilie kitufe cha Wezesha, Chagua swichi ya uteuzi wa mhimili, Chagua swichi ya ukuzaji, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.

8. Bonyeza na kushikilia kitufe chochote cha kawaida ili kuwasha pato la IO la kitufe kinacholingana kwenye mpokeaji, and release the button to turn off the output.

9. Bonyeza kitufe cha dharura, Pato la dharura linalolingana la mpokeaji litakataliwa, Kazi ya mikono italemazwa, Toa kitufe cha kuacha dharura, Pato la dharura la IO litafungwa, and the handwheel function will be restored.

8.Maelezo ya mfano wa bidhaa

① LXWGP inawakilisha mtindo wa kuonekana wenye waya, na interface ya mawasiliano ya mpokeaji

is an Ethernet interface.

② : Represents Siemens system specific.

③ : inawakilisha idadi ya swichi za uteuzi wa mhimili, inawakilisha shoka, na inawakilisha

axes.

④ : inawakilisha aina ya uteuzi wa mhimili na ishara ya ukuzaji, A inawakilisha

ishara ya pato la uhakika, and B represents encoded output signal.

9.Shida ya Bidhaa

10.Matengenezo

1. Please use it in a dry environment at room temperature and pressure to extend its service life.

2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.

3. Please keep the appearance of the handwheel clean to extend its service life.

4. Tafadhali epuka kufinya, Kuanguka, kubomoa, nk. to prevent damage to the precision components inside the handwheel or accuracy errors.

5. Ikiwa haitumiwi kwa muda mrefu, Tafadhali weka mkono wa mkono katika eneo safi na salama.Uhifadhi Uhifadhi na Usafirishaji, attention should be paid to moisture and shock resistance.

11. Habari ya usalama

1. Please read the instructions carefully before use and prohibit non professionals from operating.

2. Ikiwa hali yoyote isiyo ya kawaida hufanyika na mkono, Tafadhali acha kuitumia mara moja na shida. Kabla ya kusuluhisha, Ni marufuku kutumia mkono mbaya tena ili kuepusha ajali za usalama zinazosababishwa na makosa yasiyojulikana ya mikono;

3. Ikiwa ukarabati unahitajika, Tafadhali wasiliana na mtengenezaji. Ikiwa uharibifu unasababishwa na ukarabati wa kibinafsi, Mtengenezaji hatatoa dhamana

Isiyowekwa katika kundi – Teknolojia ya WixHC

Mwongozo wa Maagizo ya Handwheel ya Handwheel