The remote control for automatic cutting of track car rope saw is suitable for track type rope saw
cutting machines. It uses the 485 Modbus RTU protocol to control the left and right track frequency
converters, as well as the large motor frequency conversion speed control start and the front, rear,
left and right direction controllers. And it can read the working current of the large motor frequency
converter through the 485 Modbus RTU protocol. By analyzing and comparing the current of the
large motor, the speed of the left and right tracks can be automatically adjusted in real time to
achieve automatic cutting function.

2. Product functional features

1. Adopting 433MHz wireless communication technology, with a wireless operating distance of 100 meters.
2. Kupitisha kazi ya hopping ya frequency moja kwa moja na matumizi 32 sets of wireless remote controllers
simultaneously, without affecting each other.
3. Supports all frequency converters with 485 Modbus RTU protocol, and currently compatible frequency
converter brands include:Shanghai Xielin, Fuji, Huichuan, Zhongchen, INVT, na . For brands
that are not compatible, please contact us for customization.
4. Udhibiti wa kasi ya msaada, kuanza, and current reading of large motor frequency converters.
5. Msaada wa kushoto na Kufuatilia kwa kasi ya Kubadilisha Kasi ya Karatasi, kuanza, mbele, nyuma, left and right control.
6. Support linear correction of left and right track frequency converters to keep the machine walking in a
straight line.
7. Support automatic cutting function of rope saw, automatically adjust the left and right track speed in
real time according to the current information of the large motor.
8. It is also compatible with direct IO output control for motor start and stop, and analog voltage output
control for motor speed.

3. Uainishaji wa bidhaa

4. Product Function Introduction

Vidokezo:
①Screen display:

②Mode switch:

③Enable:
Combination buttons, some operations require holding down the enable button for operation,see the instructions for each switch for details.
④Large motor switch:
Using a 3-speed reset switch, pulling this switch can control the forward and reverse rotation of the large motor. Baada ya kuiachilia, the state will remain, and there will be corresponding displays on the screen. The S1↑ arrow indicates forward rotation, and the S1 ↓ arrow indicates everse rotation.
⑤Small motor forward/reverse switch:
The small motor is equipped with a 3-speed self-locking switch in front of it. Pressing the enable button and pulling this switch can control the small motor to move forward and backward, and the corresponding display will appear on the screen.The ↑↑ arrow represents forward, and the ↓↓ arrow represents backward.
⑥ Straight line correction:
Using a multi turn encoder knob, press the enable button, turn the knob right, and display the straight line correction: Df: The left turn knob increases by 1 unit per rotation, and the left
motor speed increases by 0.1 Sehemu; Turn left knob, straight line correction display: Df: On the right, every turn of the knob increases by 1 Sehemu, and the speed of the right motor increases
by 0.1 unit.
⑦Small motor turning switch:
Using a 3-speed reset switch, when manually operated, the small motor can be controlled to turn left or right. Once released, the remote control will automatically stop this action. In the forward state, when this switch is turned, the corresponding display will appear on the screen. The ←↑ arrow indicates left turn, and the ↑→ arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen. The ←↓ arrow indicates left turn, and the ↓→ arrow indicates right turn.
⑧ Large motor speed regulation:
Using a multi turn encoder knob, rotating 1 grid each time, the speed value of the large motor changes by approximately 0.2 units. Fast rotation can quickly modify the speed value of the large motor.
⑨ Small motor speed regulation:
Using a multi turn encoder knob, in manual mode, press the enable button and then rotate one grid at a time，the speed value of the left and right small motors changes by about 0.1 units, and quick rotation can quickly modify the speed value of the small motor.In automatic mode, press the enable button and rotate one grid at a time,the speed limit value F of the small motor changes by approximately 0.1 units. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote control power switch
The remote control display screen is turned on.

5. Product accessory diagram

6. Mwongozo wa Ufungaji wa Bidhaa
6.1 Product installation steps
1. Install the receiver into the electrical cabinet through the buckle on the back, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the equipment to the receiver through wires.
3. After fixing the receiver, it is necessary to connect the antenna equipped with the receiver and install or place the outer end of the antenna outside the electrical cabinet. Inashauriwa kuiweka juu ya baraza la mawaziri la umeme kwa athari bora ya ishara. It is forbidden to leave the antenna unconnected or place it inside the electrical cabinet, as it may cause the signal to be unusable.
4. Mwishowe, install the battery on the remote control, tighten the battery cover, and turn on the power switch of the remote control. After the remote control display screen shows the normal
working interface, remote control operations can be performed.

6.2 Vipimo vya ufungaji wa mpokeaji

6.3 Mchoro wa kumbukumbu ya wiring

7. Product operation instructions
7.1 Remote Control Parameter Settings
Method to enter the remote control backend parameters:

Turn the mode switch to manual mode, adjust the speed of the small motor to 25 on both sides, or 0, 10, 20, 40, 50 on all sides, and continuously turn the forward switch of the large motor up 3 times and down 3 times;
Use the “Small Motor Speed Control” knob to flip pages, press the enable button, and then turn the small motor speed control knob to modify parameters. After modification, turn the page to the end,Chagua “Save” to exit, and press the enable button to exit the menu;
The parameters are as follows:
Upeo wa sasa: feedback range of large motor current, set range 15-200A, Chaguo -msingi 100;
Speed control parameters: Automatic mode, small motor automatically accelerates faster or slower,the smaller the faster, set range 200-1500, Chaguo -msingi 800;
Paramu ya kupungua: Set the upper limit that allows the motor speed to change. When the current changes beyond this value, the deceleration will occur. The smaller, the faster the deceleration of the left and right motors, with a range of 05-12 and a default of 06;
Kuongeza kasi A1: The larger the motor speed, the faster it increases, with a range of 00-06 and a default of 01;
Kuteremka A2: The larger the motor speed, the faster it decreases, with a range of 00-06 and a default of 02;
Enable speed regulation: Does the small motor speed regulation need to be enabled? 00 does not enable, 01 enables, default is 01;
Start self-locking: Does the large motor automatically maintain self-locking after the forward and reverse switches are released? 00 does not hold, 01 holds, default 01
Upeo wa kutembea: maximum speed of left and right motors, range 10-100, Chaguo -msingi 50;
Cutting current: maximum cutting current, displayed on the screen as IC value, range 15-160, default 30,
corresponding to IC: 30 displayed on the screen. The upper limit of this parameter is 80% of the maximum current;
Default speed limit: The default small motor automatic cutting speed when turned on is within the range of 0-100, with a default of 10. The screen displays F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Automatic mode: Set to 00, the automatic/manual switch is a mode switch. Set to 01, the automatic/manual switch is set to the automatic position, the display screen shows lighting, and the automatic terminal output on the receiver is closed. When set to manual, the automatic output terminal is disconnected;
Speed limit deviation: The upper limit of the automatic cutting speed of the small motor ranges from 00 to 200, with a default of 60 and a corresponding display of 6.0 on the screen; Upper limit of display value=speed limit offset x 0.1;
Upeo wa mwenyeji: maximum speed of the large motor, range 10-100, Chaguo -msingi 50;
Mbus equipment (mandatory): Selection of large motor frequency converter model, range 00-03, Chaguo -msingi 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）
SBUS equipment (mandatory): Small motor frequency converter model selection, range 00-05, Chaguo -msingi 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）

04-Anchuanda 05-None

7.2 Parameter setting of frequency converter
1. Command source selection: Communication command channel
2. Main frequency source selection: communication given
3. Baud rate: 19200
4. Data format: No verification, data format<8-N-1>
5. Local address: Set the left frequency converter to 1, the right frequency converter to 2, na
the large motor frequency converter to 3
7.3 Remote Control Operation Instructions
1. Power on the machine, Washa udhibiti wa kijijini, enter the remote control backend, set the
remote control backend parameters, mainly setting the small motor and large motor frequency
converter models: (skip this step if the machine manufacturer has already set it);
2. Set the parameters of the frequency converter (skip this step if the machine manufacturer
has already set it);
3. Set the remote control to manual mode, and then use the remote control to move the machine to
the working position;
4. Katika hali ya mwongozo, set the cutting current of the large motor to IC and the speed of the large motor
5. Switch to automatic mode and set the cutting speed limit F value for the small motor;
6. In automatic mode, turn the large motor switch to forward to start the large motor, then turn
the small motor switch to forward or reverse, and the remote control enters automatic cutting
mode to start cutting.

8.Product troubleshooting

9.Maintenance
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Ikiwa haitumiwi kwa muda mrefu, please remove the battery and store the remote control and battery in a clean
and safe place.
6.Wakati wa uhifadhi na usafirishaji, attention should be paid to moisture and shock resistance.

10. Habari ya usalama
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by
insufficient power, which may result in the remote control being unable to operate.
3. Ikiwa ukarabati unahitajika, Tafadhali wasiliana na mtengenezaji. Ikiwa uharibifu unasababishwa na ukarabati wa kibinafsi, the manufacturer
will not provide warranty.

Mfano: DH01R-4W-26K

Vifaa vinavyotumika:various industrial equipment

2.Mchoro wa vifaa vya bidhaa

Kumbuka: Unaweza kuchagua moja ya antennas tatu. The suction cup antenna is standard by default.

3.Product model description

Kumbuka:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.

②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, with a range of 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.

④Analog input, ranging from 1 to 2, indicating that there are 1 to 2 pembejeo za analog(maximum 2 vituo); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, nk.) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Vipengee

1）Maximum 26 Matokeo ya Relay;
2）Maximum 4 Vituo vya Pato la Analog 0-10V (Mbio za kuonyesha zinaweza kubinafsishwa): inasaidia 2 Vituo vya pato la potentiometer la dijiti;
3）2 analog inputs; na kuonyeshwa kwenye udhibiti wa mbali, Aina ya kuonyesha inaweza kubinafsishwa
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 Betri za AA, low power consumption design;
6） Wireless operation distance is 200 mita;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.

5.Maelezo ya Kubadilisha Kijijini

6.Display content introduction

W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)

Voltage ya chini: Betri ya kudhibiti kijijini ni chini sana, please replace the battery.

Mtandao umeshuka: Ishara isiyo na waya inaingiliwa. Tafadhali angalia nguvu ya mpokeaji, Nguvu tena, and restart the remote control.

7.Maagizo ya Utendaji wa Udhibiti wa Kijijini

1） Turn on the remote control
Wakati mpokeaji anaendeshwa, the receiver working indicator flashes; Weka betri mbili za AA katika udhibiti wa mbali, Washa swichi ya nguvu, and the display shows a value,kuonyesha mwanzo mzuri. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
Wakati kitufe cha kusimamisha dharura kinasisitizwa, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Toka kwenye menyu ya parameta: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 to 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 to 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 to 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 to 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;

8.Tabia za Udhibiti wa Umeme wa Kijijini

9.Saizi ya kudhibiti kijijini

The final interpretation right of this product belongs only to our company.

Mfano: DH12S-P6S

Vifaa vinavyotumika:Mashine ya kuona ya waya/blade

2.Mchoro wa vifaa vya bidhaa

Kumbuka: Unaweza kuchagua moja ya antennas tatu. The suction cup antenna is standard by default.

3.Maelezo ya Kubadilisha Kijijini

4.Utangulizi wa DisplayContent

Kasi kuu ya gari: Kuu: 0-50
Kusafiri kwa kasi ya gari: Mstari: 0-50
Kiwango cha juu cha kasi ya gari moja kwa moja ya kukata: Kasi: 0-30
(Vigezo vinaweza kubadilishwa)
Kukata moja kwa moja kwa mpangilio wa gari kuu sasa: Kuweka: 28 (Vigezo vinaweza kubadilishwa)
Swing mkono wa kasi ya gari: Swing: 0-50

Voltage ya chini: Betri ya kudhibiti kijijini ni chini sana, please replace the battery.

Mtandao umeshuka: Ishara isiyo na waya inaingiliwa. Tafadhali angalia nguvu ya mpokeaji, Nguvu tena, and restart the remote control.

5.Maagizo ya Utendaji wa Udhibiti wa Kijijini

1） Washa udhibiti wa kijijini

Wakati mpokeaji anaendeshwa, Nuru ya nguvu ya D2 kwenye mpokeaji huwa daima, AndThe D1 Ishara ya ishara huanza kung'aa; Weka betri mbili za AA katika udhibiti wa mbali, Washa swichi ya nguvu, Na onyesho litaonyesha kasi ya gari, indicating successful startup.

2） Motor kubwa na kanuni ya kasi/motor kuu na kanuni ya kasi

Bonyeza na ushikilie “Udhibiti wa kasi huwezesha”, Badilisha “Mbele/reverse” Badilika mbele, na gari kuu ya mpokeaji itawasha;
Bonyeza na ushikilie “Udhibiti wa kasi huwezesha”, Badilisha “Mbele/reverse” Badilisha ili ubadilishe, na gari kuu ya mpokeaji itabadilisha na kuwasha;Sogeza tu kubadili kwa mwelekeo wa kati au wa nyuma, Na gari kuu itasimama mara moja bila kubonyeza kitufe cha kudhibiti kasi;Zungusha “gari kubwa” Knob kurekebisha voltage ya kanuni ya kasi ya inverter kuu ya mpokeaji hadi 0-10V;

3） Gari inayosafiri

Bonyeza na ushikilie “Marekebisho ya kasi ya kuwezesha”, Badilisha “Mbele/reverse” Badilika mbele au nyuma, Na gari la kutembea litatembea kwa kasi kubwa ya 50;

4） Swing Arm motor na kanuni ya kasi

Badilisha “Swing Arm/Reverse” Badilisha kwa mkono wa swing au mafungo, Na gari la mkono wa mpokeaji linaanza; Kisha zunguka “Marekebisho ya kasi” Knob kurekebisha kasi ya gari la swing;

Bonyeza na ushikilie “Marekebisho ya kasi ya kuwezesha”, Na kisha vuta “Swing Arm/Reverse” Badili, Gari la mkono wa swing litatembea kwa kasi kubwa ya 50;

5） Kusafiri kwa kasi ya kasi ya gari

Bonyeza na ushikilie “Marekebisho ya kasi ya kuwezesha” kitufe na zunguka “Marekebisho ya kasi” Ili kurekebisha kiwango cha juu cha kasi ya gari inayosafiri wakati wa kukata moja kwa moja;

6Kukata moja kwa moja

Hatua ya kwanza ni kuanza gari kuu; Hatua ya pili ni kurekebisha kiwango cha juu cha kasi ya gari la kutembea; Hatua ya tatu ni kusonga “mbele/reverse” Badilika mbele au nyuma ili uingie kwenye hali ya kukata kiotomatiki;

7） Menyu ya parameta (Watumiaji ni marufuku kuibadilisha bila ruhusa)

Ingiza menyu ya parameta:Katika hali ya mwongozo, Wakati kasi kuu ya gari ni 0, kushinikiza mbele/kubadili ubadilishe mara tatu mfululizo, na kisha kushinikiza mara tatu mfululizo ili kuingia kwenye menyu ya parameta;
Toka kwenye menyu ya parameta: Badili kisu cha marekebisho ya kasi, Chagua Hifadhi au usihifadhi, na bonyeza kitufe cha Wezesha kudhibitisha;
Imekadiriwa sasa: Thamani ya kiwango cha juu cha gari kuu sasa, kitengo ampere;
Viwango vya marekebisho ya kasi: Vigezo vya kudhibiti moja kwa moja, Chaguo -msingi 800, Kitengo cha Milli Pili,Marekebisho ni marufuku;
Paramu ya kupungua: Wakati thamani ya mabadiliko ya sasa inazidi thamani hii, Kuteremka haraka huanza, kitengo ampere;
Kuongeza kasi A1: Wakati sasa kukata ni chini kuliko seti ya kukata sasa, Thamani ya kasi iliongezeka kwa kila kuongeza kasi ya motor ya kutembea;
Kuteremka A2: Wakati sasa kukata ni juu kuliko seti ya kukata sasa, Thamani ya kasi iliyopunguzwa na kila kushuka kwa gari la kutembea;
Mkono wa swing wa sasa: Thamani ya chaguo -msingi, Marekebisho ni marufuku;
Acha wakati: Baada ya hali ya moja kwa moja ya kuzima, Ya sasa itagunduliwa tena baada ya kipindi cha muda. Ikiwa ni chini ya seti ya sasa, Gari la kutembea litaanza kiotomatiki; Kitengo cha pili, Thamani ya chaguo -msingi, Marekebisho ni marufuku;
Upeo wa sasa: Aina ya maoni kuu ya gari ya sasa, kitengo ampere;
Upeo wa mwenyeji: Udhibiti wa Kijijini Kuu Marekebisho ya Marekebisho ya Marekebisho ya Marekebisho ya Motor;
Upeo wa kutembea: Param batili;
Kasi ya kukabiliana na kasi: Wakati wa kukata moja kwa moja, Kiwango cha udhibiti wa kijijini kinachotembea kikomo cha kasi ya motor = 50% ya param hii;
Ongeza usikivu: Wakati maoni kuu ya gari yanaongezeka, Kila wakati ongezeko linazidi thamani hii, Gari la kutembea huharakisha;
Punguza usikivu: Wakati maoni ya sasa ya gari kuu yanapungua, na kila wakati thamani ya kupungua inazidi thamani hii, Gari inayotembea huteleza;
Sensitivity kukabiliana: Ongeza na toa nyongeza ya kukabiliana na unyeti;
Weka sasa: Kukata moja kwa moja, Kizingiti cha maoni kuu ya gari ya sasa. Ikiwa thamani hii imezidi,Gari la kutembea huanza kuteleza;Chini ya thamani hii, Gari la kutembea huanza kuharakisha;Sehemu: Ampere;
Idling exit: Wakati hali ya moja kwa moja inapoanza, Ikiwa maoni kuu ya gari ni chini ya thamani hii,Itakuwa katika hali ya kitambulisho. Ikiwa ni kubwa zaidi ya thamani hii, itatoka kwenye hali ya kutambulika na kuingiza hali ya kukata.UNIT ni Ampere;
Hakuna mzigo wa sasa:Wakati hali ya moja kwa moja inapoanza, Ikiwa maoni kuu ya gari ni chini ya thamani hii,iko katika hali ya kubeba-mzigo. Ikiwa ni kubwa zaidi ya thamani hii, itatoka kwenye hali ya kubeba mzigo na ingiza hali ya kukata.UNIT ni Ampere;
Kasi ya mkono wa swing: Kasi ya awali ya motor ya mkono wa swing wakati wa kuanza;
Njia ya kukata: Badili kati ya blade saw na njia za waya, na vigezo vitabadilika ipasavyo baada ya kubadili; Katika Blade Saw Modi, Onyesho la kudhibiti kijijini linaongeza motor ya mkono wa swing, Wakati katika hali ya waya, Hakuna motor ya mkono wa swing;
Wakati wa kujaza: Wakati maoni kuu ya motor ya sasa yanazidi kusimamishwa kwa sasa, Maoni ya sasa yatagunduliwa kuendelea. Wakati wa deni ni muda wa kugundua hii inayoendelea.Baada ya wakati huu, Ikiwa gari kuu ya sasa bado inazidi kusimamishwa kwa sasa, Gari la kutembea litaacha;vinginevyo, Gari la kutembea litaacha. Gari itaendelea;
Acha sasa: Maoni kuu ya gari sasa yanazidi thamani hii, Na gari la kutembea litaacha;Kitengo ni Ampere;
Chaguo -msingi: Thamani ya awali ya kikomo cha kasi ya gari wakati udhibiti wa kijijini umewashwa = 50% ya thamani hii;

6.Tabia za Udhibiti wa Umeme wa Kijijini

7.Saizi ya kudhibiti kijijini

The final interpretation right of this product belongs only to our company.

Mfano: DH12S-LD

Vifaa vinavyotumika:crawler wire saw machine

Mchoro wa vifaa vya bidhaa

Kumbuka: Unaweza kuchagua moja ya antennas tatu. The suction cup antenna is standard by default.

Maelezo ya Kubadilisha Kijijini

Utangulizi wa DisplayContent

Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (Vigezo vinaweza kubadilishwa)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)

Voltage ya chini: Betri ya kudhibiti kijijini ni chini sana, please replace the battery.

Mtandao umeshuka: Ishara isiyo na waya inaingiliwa. Tafadhali angalia nguvu ya mpokeaji, Nguvu tena, and restart the remote control.

Maagizo ya Utendaji wa Udhibiti wa Kijijini

1.Turn on the remote control

When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, Washa swichi ya nguvu, andthe display will show the motor speed, indicating successful startup.

2.Large motor and speed regulation

Badilisha “mbele/reverse” Badilika mbele, the receiver’s large motor will turn on, and the display will show forward

Badilisha “mbele/reverse” Badilisha ili ubadilishe, the large motor of the receiver will turn on in reverse, and the display will show reverse

Zungusha “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;

3.Small motor and speed regulation

Move the “mbele/reverse” Badilika mbele, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward

Badilisha “Mbele/reverse” Badilisha ili ubadilishe, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse

4.Turn left and right

Badilisha “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left

Badilisha “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right

5.Turn in place

Katika hali ya mwongozo:
Turn left in place: Bonyeza na ushikilie “Enable” Kitufe, Badilisha “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;

Turn right in place: Bonyeza na ushikilie “Enable” Kitufe, Badilisha “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;

6.Small motor speed limit adjustment

In automatic mode: press and hold the “Enable” kitufe na zunguka “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;

7.Kukata moja kwa moja

The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;

8. Straight line correction

When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: Katika hali ya mwongozo, press and hold the “Enable” kitufe na zunguka “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 to 90; correction voltage of one correction unit is about 0.02V;

9. Parameter menu (Watumiaji ni marufuku kuibadilisha bila ruhusa)

Some functions of the remote control can be adjusted through parameters. Katika hali ya mwongozo, when the small motor speed S2 is 10, kushinikiza mbele/kubadili ubadilishe mara tatu mfululizo, and then push it down three times in a row to enter the parameter menu;
Toka kwenye menyu ya parameta: choose to save or not save, then press the enable button to confirm the exit;
Upeo wa sasa: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, Chaguo -msingi 800, Marekebisho ni marufuku;
Paramu ya kupungua: automatic cutting control parameter. Wakati thamani ya mabadiliko ya sasa inazidi thamani hii,deceleration begins.
Kuongeza kasi A1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Kuteremka A2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Upeo wa kutembea: the maximum speed of the small motor.
Cutting current: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Default speed limit: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Kasi ya kukabiliana na kasi: the maximum speed of the small motor during automatic cutting.
Upeo wa mwenyeji: maximum speed of large motor.

Tabia za Udhibiti wa Umeme wa Kijijini

Saizi ya kudhibiti kijijini

The final interpretation right of this product belongs only to our company.

Mfano：ATWGP-12

Mfumo wa marekebisho: Mifumo yote ya CNC iliyo na interface ya mikono

Bidhaa hii ni jenereta ya kunde ya mwongozo inayotumiwa na zana za mashine ya CNC. Imetumika kwa nguvu katika nyanja kama zana za mashine ya CNC, CNC Lathes, Vituo vya Machining,Mashine za kuchora za CNC na milling. Bidhaa hii hutumia Uhamishaji wa Wireless, Kuondoa hitaji la miunganisho ya jadi ya waya wa chemchemi, Kupunguza mapungufu yanayosababishwa na nyaya, Kuondoa Drag ya Cable, mafuta na uchafu mwingine, na kufanya operesheni iwe rahisi zaidi. Kifurushi cha bidhaa ni pamoja na mpokeaji na mkono wa elektroniki usio na waya. Mpokeaji ameunganishwa na vifaa vya CNC kupitia kebo ya mtandao, na mkono wa elektroniki (Jenereta ya kunde) imeunganishwa na kuwasiliana na mpokeaji kupitia teknolojia ya maambukizi isiyo na waya. Mendeshaji anashikilia mkono na anaweza kuondoa vikwazo vya unganisho wa waya wa chemchemi na kusonga kwa uhuru. Kwa milling kubwa ya gantry, CNC Lathes, zana za mashine za kusafiri, Kukata na matumizi mengine, it brings great convenience and improves work efficiency.

Inasaidia chapa anuwai za mfumo kama vile Nokia, Mitsubishi, FANUC, Taiwanxindai, Baoyuan, Fagor, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Kutumia bendi ya masafa ya mawasiliano isiyo na waya ya 433MHz, Umbali wa kufanya kazi bila waya ni 40 mita;
2. Kupitisha kazi ya hopping ya frequency moja kwa moja na matumizi 32 seti za mikono isiyo na waya wakati huo huo bila kuathirina;
3. Inasaidia kitufe cha dharura na 3 Matokeo ya kitufe cha kubadili;
4. Inasaidia chaguzi nyingi za mhimili wa 6-axis, 7-mhimili, 8-mhimili, 9-mhimili, 10-Axis na 12-axis, Na kasi 3 na kasi 4 ya ukuzaji. Uteuzi na swichi za ukuzaji zinaunga mkono aina anuwai za ishara kama vile kuweka coding ya binary, Uhakika-kwa-uhakika, Nambari ya kijivu, nk.;
5. Inasaidia ishara ya kunde ya 5V, 24V ishara ya kunde na aina zingine za ishara za kunde;
6. Ubunifu wa matumizi ya nguvu ya chini, 2 Betri za AA zinaweza kutumika kwa zaidi ya 1 mwezi;
7. Inasaidia antenna ya upanuzi wa nje, Inafaa kwa mazingira anuwai ya ufungaji wa zana ya mashine, Kuhakikisha utulivu wa ishara;

Kumbuka:
1. Taa ya kiashiria cha hali:
Mwanga wa ishara (kushoto): Mwanga wa ishara huwa daima wakati mkono wa mikono ulifanya kazi, na haitoi taa wakati haifanyi kazi;
Taa ya chini ya kengele ya voltage (kulia): Wakati nguvu ya betri iko chini sana,taa ya kengele inawaka au inakaa;
2. Wezesha kitufe:
Baada ya kubonyeza na kushikilia kitufe cha Wezesha, Uteuzi wa mhimili na ishara za ukuzaji zimeamilishwa, na pato la encoder ya kunde ni halali;
3. Kitufe cha kawaida:
Kitufe bila kazi yoyote inaweza kudhibiti pato linalolingana la mpokeaji;

Com1: Terminal ya kawaida kwa pato la ishara ya ukuzaji wa axis; inaweza kushikamana na ishara ya umma ya 0-24V
Com2: Terminal ya kawaida ya 3 Matokeo ya kitufe cha kawaida;

*Uteuzi wa Axis na ukuzaji unaweza kuchaguliwa kupitia programu, coding au uhakika-kwa-point, Tafadhali wasiliana na wafanyikazi kwa maelezo

The final interpretation right of this product belongs to our company.

Mfumo wa marekebisho: Mifumo yote ya CNC iliyo na interface ya mikono

Bidhaa hii ni jenereta ya kunde ya mwongozo inayotumiwa na zana za mashine ya CNC. Imetumika kwa nguvu katika nyanja kama zana za mashine ya CNC, CNC Lathes, Vituo vya Machining,Mashine za kuchora za CNC na milling. Bidhaa hii hutumia Uhamishaji wa Wireless, Kuondoa hitaji la miunganisho ya jadi ya waya wa chemchemi, Kupunguza mapungufu yanayosababishwa na nyaya, Kuondoa Drag ya Cable, mafuta na uchafu mwingine, na kufanya operesheni iwe rahisi zaidi. Kifurushi cha bidhaa ni pamoja na mpokeaji na mkono wa elektroniki usio na waya. Mpokeaji ameunganishwa na vifaa vya CNC kupitia kebo ya mtandao, na mkono wa elektroniki (Jenereta ya kunde) imeunganishwa na kuwasiliana na mpokeaji kupitia teknolojia ya maambukizi isiyo na waya. Mendeshaji anashikilia mkono na anaweza kuondoa vikwazo vya unganisho wa waya wa chemchemi na kusonga kwa uhuru. Kwa milling kubwa ya gantry, CNC Lathes, zana za mashine za kusafiri, Kukata na matumizi mengine, it brings great convenience and improves work efficiency.

Inasaidia chapa anuwai za mfumo kama vile Nokia, Mitsubishi, FANUC, Taiwanxindai, Baoyuan, Fagor, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Kutumia bendi ya masafa ya mawasiliano isiyo na waya ya 433MHz, Umbali wa kufanya kazi bila waya ni 40 mita;
2. Kupitisha kazi ya hopping ya frequency moja kwa moja na matumizi 32 seti za mikono isiyo na waya wakati huo huo bila kuathirina;
3. Inasaidia kitufe cha dharura na 3 Matokeo ya kitufe cha kubadili;
4. Inasaidia chaguzi nyingi za mhimili wa 6-axis, 7-mhimili, 8-mhimili, 9-mhimili, 10-Axis na 12-axis, Na kasi 3 na kasi 4 ya ukuzaji. Uteuzi na swichi za ukuzaji zinaunga mkono aina anuwai za ishara kama vile kuweka coding ya binary, Uhakika-kwa-uhakika, Nambari ya kijivu, nk.;
5. Inasaidia ishara ya kunde ya 5V, 24V ishara ya kunde na aina zingine za ishara za kunde;
6. Ubunifu wa matumizi ya nguvu ya chini, 2 Betri za AA zinaweza kutumika kwa zaidi ya 1 mwezi;
7. Inasaidia antenna ya upanuzi wa nje, Inafaa kwa mazingira anuwai ya ufungaji wa zana ya mashine, Kuhakikisha utulivu wa ishara;

Kumbuka:
1. Taa ya kiashiria cha hali:
Mwanga wa ishara (kushoto): Mwanga wa ishara huwa daima wakati mkono wa mikono ulifanya kazi, na haitoi taa wakati haifanyi kazi;
Taa ya chini ya kengele ya voltage (kulia): Wakati nguvu ya betri iko chini sana,taa ya kengele inawaka au inakaa;
2. Wezesha kitufe:
Baada ya kubonyeza na kushikilia kitufe cha Wezesha, Uteuzi wa mhimili na ishara za ukuzaji zimeamilishwa, na pato la encoder ya kunde ni halali;
3. Kitufe cha kawaida:
Kitufe bila kazi yoyote inaweza kudhibiti pato linalolingana la mpokeaji;

Com1: Terminal ya kawaida kwa pato la ishara ya ukuzaji wa axis; inaweza kushikamana na ishara ya umma ya 0-24V
Com2: Terminal ya kawaida ya 3 Matokeo ya kitufe cha kawaida;

*Uteuzi wa Axis na ukuzaji unaweza kuchaguliwa kupitia programu, coding au uhakika-kwa-point, Tafadhali wasiliana na wafanyikazi kwa maelezo

The final interpretation right of this product belongs to our company.