1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 mita.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, Uteuzi wa Axis, ukuzaji, and other information.
3. Kusaidia kitufe cha dharura, Badilisha pato la ishara la IO, and the hand wheel shutdown emergency stop is still valid.
4. Inasaidia 6 vifungo vya kawaida, switch IO signals, and can output signals to the system through IO wiring or communication.
Mwongozo wa Maagizo ya Handwheel ya Handwheel
Maelezo
1. Utangulizi wa bidhaa
Electronic handwheel is used for manual guidance, msimamo, Ulinganisho wa zana, na shughuli zingine kwenye zana za mashine za CNC. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, ukuzaji, buttons, andother signals through communication.
2.Product functional features
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 mita.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, Uteuzi wa Axis, ukuzaji, and other information.
3. Kusaidia kitufe cha dharura, Badilisha pato la ishara la IO, and the hand wheel shutdown emergency stop is still valid.
4. Inasaidia 6 vifungo vya kawaida, switch IO signals, and can output signals to the system through IO wiring or communication.
5. Inasaidia 6 or 8 Udhibiti wa Axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. Inasaidia 3 or 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Msaada wa Pulse Encoder, 100 Pulses/Turn, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.
3. Uainishaji wa bidhaa
| Handwheel working power supply voltage | DC24V/1A |
| Receiver power supply voltage | DC24V/1A |
| Receiver IO output load range | DC24V |
| Hand wheel end cable length | 10m |
| Receiver end cable length | 1m |
| Receiver end network cable length | 3m |
| Operating temperature | -25℃<X<55℃ |
| Anti-fall height | 1m |
| Custom Button Quantity | 6 |
| Product dimensions | 233*90.7*77.4（mm） |
4.Utangulizi wa kazi ya bidhaa
Kumbuka:
Emergency stop button:
Bonyeza kitufe cha dharura, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.
After releasing the emergency stop, Pato la dharura la IO kwenye mpokeaji limefungwa, and all functions of the handwheel are restored.
② Screen display:
PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 vifungo vya kawaida, each corresponding to an IO output point on the receiver, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Bonyeza na ushikilie kitufe cha Wezesha, shake the pulse encoder, emit a pulse signal, and control the movement of the machine axis.
⑧ Handwheel cable:
Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.
5. Product accessory diagram
6. Mwongozo wa Ufungaji wa Bidhaa
6.1 Product installation steps
6.1 Product installation steps
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.
6.2 Vipimo vya ufungaji wa mpokeaji
6.3 Installation dimensions of aviation plugs
6.4 Mchoro wa kumbukumbu ya wiring
7.Maagizo ya Uendeshaji wa Bidhaa
7.Maagizo ya Uendeshaji wa Bidhaa
1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.
2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.
3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.
4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Chagua ukuzaji: Switch the magnification switch and select the magnification level you need.
7. Kusonga mhimili: Bonyeza na ushikilie kitufe cha Wezesha, Chagua swichi ya uteuzi wa mhimili, select the magnification switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Bonyeza kitufe cha dharura, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled, release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
8.Maelezo ya mfano wa bidhaa
① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : inawakilisha idadi ya swichi za uteuzi wa mhimili, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.
9.Product trouble shooting
10.Maintenance
1. Tafadhali tumia katika mazingira kavu kwa joto la kawaida na shinikizo kupanua maisha yake ya huduma.
2. Tafadhali epuka kutumia katika mazingira yasiyokuwa ya kawaida kama vile mvua na maji ya maji ili kupanua maisha ya huduma.
3. Tafadhali weka muonekano wa mikono safi ili kupanua maisha yake ya huduma.
4. Tafadhali epuka kufinya, Kuanguka, kubomoa, nk. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Ikiwa haitumiwi kwa muda mrefu, please store the handwheel in a clean and safe place.During storage and transportation, Makini inapaswa kulipwa kwa unyevu na upinzani wa mshtuko.
11. Habari ya usalama
1. Tafadhali soma maagizo kwa uangalifu kabla ya matumizi na usikataze wataalamu wasiofanya kazi.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Ikiwa ukarabati unahitajika, Tafadhali wasiliana na mtengenezaji. Ikiwa uharibifu unasababishwa na ukarabati wa kibinafsi, Mtengenezaji hatatoa dhamana
