1.தயாரிப்பு அறிமுகம்

The programmable CNC remote control PHB06B is suitable for wireless
remote control operation of various CNC systems. It supports users to
customize programming and develop button functions to realize remote
control of various functions on the CNC system; it supports users to
customize programming and develop display content to realize dynamic
display of system status; the remote control comes with a rechargeable
battery and supports Type-C interface charging.

2.தயாரிப்பு அம்சங்கள்

1. Using 433MHZ wireless communication technology, the wireless operation
distance is 80 மீட்டர்;
2. Using automatic frequency hopping function, 32 sets of wireless remote
controllers can be used at the same time without affecting each other;
3. ஆதரவு 12 custom button programming;
4. Support 2.8-inch screen, display content custom programming;
5. ஆதரவு 1 6-speed axis selection switch, which can be custom programmed;
6. ஆதரவு 1 7-speed magnification switch, which can be custom programmed;
7. ஆதரவு 1 மின்னணு கை சக்கரம், 100 pulses/turn;
8. நிலையான வகை-சி சார்ஜிங்கை ஆதரிக்கவும்; 5வி -2 ஏ சார்ஜிங் விவரக்குறிப்பு; battery
specification 18650/12580mWh battery.

3.வேலை செய்யும் கொள்கை

4. தயாரிப்பு விவரக்குறிப்புகள்

5.தயாரிப்பு செயல்பாடு அறிமுகம்

குறிப்புகள்：
①Power switch：
Control hand wheel to open and close

②Enable buttons on both sides：
The enabling button must be pressed to crank the hand wheel;

③Custom button area
12 buttons arranged in 3X4, user-defined programming;

④Axis selection, magnification switch
1 6-position axis selection switch, which can be customized and programmed;
1 7-position ratio switch, which can be customized and programmed

⑤ Emergency stop switch:
Handwheel emergency stop switch;

⑥Display area:
Can display current power, signal, and customized display content;

⑦Electronic hand wheel：
1 மின்னணு கை சக்கரம், 100 pulses/turn.

⑧Charging port:

Built-in rechargeable battery, charged using Type-C charger, charging voltage 5V,
current 1A-2A; charging time 7 hours;

6.தயாரிப்பு பாகங்கள் வரைபடம்

7.தயாரிப்பு நிறுவல் வழிகாட்டி

1. Insert the USB receiver into the computer, the computer will automatically
recognize and install the USB device driver without manual installation;
2. Insert the remote control into the charger. After the battery is fully charged, turn
on the power switch, ரிமோட் கண்ட்ரோலை இயக்கவும், and the display shows normal, which
means the power-on is successful;
3. After powering on, you can perform any button operation. The remote control can
support dual button operation at the same time. When you press any button, a black
square will appear next to the signal on the remote control, indicating that the button
is valid.

8.தயாரிப்பு செயல்பாட்டு வழிமுறைகள்
Before product development and use, you can use the Demo software we provide to test
the buttons and display of the remote control, or use the Demo as a reference routine for
future programming development;
Before using the Demo software, please plug the USB receiver into the computer, make
sure the remote controller has sufficient power, சக்தி சுவிட்சை இயக்கவும், and then use it;
When any button on the remote control is pressed, the test software Demo will display the
corresponding key value. அதை வெளியிட்ட பிறகு, the key value display disappears, indicating that
the button upload is normal.

9.தயாரிப்பு சரிசெய்தல்

10. பராமரிப்பு மற்றும் கவனிப்பு

1. Please use it in a dry environment with normal temperature and pressure to extend
the service life;
2. Do not use sharp objects to touch the key area to extend the service life of the key;
3. Please keep the key area clean to reduce key wear;
4. Avoid squeezing and falling to cause damage to the remote control;
5. நீண்ட நேரம் பயன்படுத்தப்படாவிட்டால், please remove the battery and store the remote control and
battery in a clean and safe place;
6. Pay attention to moisture-proof during storage and transportation.

11.பாதுகாப்பு தகவல்

1. Please read the instructions carefully before use. Non-professionals are prohibited
from operating.
2. Please use the original charger or a charger produced by a regular manufacturer with
the same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing
the remote control to be unresponsive.
4. பழுது தேவைப்பட்டால், உற்பத்தியாளரை தொடர்பு கொள்ளவும். If the damage is caused by
self-repair, the manufacturer will not provide warranty.

1.தயாரிப்பு அறிமுகம்

The programmable CNC remote control PHB10 is suitable for wireless
remote control operation of various CNC systems. It supports user-defined
programming to develop button functions, and realize remote control of various
functions on the CNC system; it supports user-defined programming to develop
LED lights to light up and turn off, and realize dynamic display of system status;
the remote control comes with a rechargeable battery and supports Type-C
interface charging.

2.தயாரிப்பு அம்சங்கள்

1. Using 433MHZ wireless communication technology, the wireless operation
distance is 80 மீட்டர்;
2.Using automatic frequency hopping function, 32 sets of wireless remote
controllers can be used at the same time without affecting each other;
3.ஆதரவு 32 custom button programming;
4.ஆதரவு 9 custom LED light display programming;
5.Support IP67 waterproof level;
6.Support standard Type-C interface charging; 5வி -2 ஏ சார்ஜிங் விவரக்குறிப்பு;
1100 mAh large capacity battery, with automatic sleep standby function; realize
ultra-long low power standby;
7.Support real-time display of power.

3.வேலை செய்யும் கொள்கை

4. தயாரிப்பு விவரக்குறிப்புகள்

5.தயாரிப்பு செயல்பாடு அறிமுகம்

குறிப்புகள்：
①Battery level display：
Lights up after power on, turns off after power off;
If the battery indicator light is only one bar and keeps flashing, it means the
battery is too low. Please replace the battery;

If the battery indicator lights are all on and the other LED lights flash back and
forth, it means the battery is very low. Please replace the battery;
If the battery indicator does not light up or go out, and the device cannot be
started by pressing and holding the power button, தயவுசெய்து பேட்டரியை மாற்றவும்;

②Button area：32 buttons arranged in 4X8, user-defined programming;

③Status LED：
COMMU: Button indicator light, lights up when the button is pressed and goes
out when the button is released; other lights are custom displays;

④Power switch：
Long press for 3 seconds to turn on, long press for 3 seconds to turn off;
⑤Charging port：
Use Type-C charger to charge, charging voltage 5V, current 1A-2A; charging
time 3-5 hours;

When charging, the power indicator flashes, indicating that it is charging. When
fully charged, the power indicator will show full bar without flashing.

6.தயாரிப்பு பாகங்கள் வரைபடம்

7.தயாரிப்பு நிறுவல் வழிகாட்டி

1 . I nsert the USB receiver into the computer, the computer will automatically
recognize and install the USB device driver without manual
2. Insert the remote control into the charger. After the battery is fully charged, press
and hold the power button for 3 seconds. The remote control will turn on and the power
indicator will light up, indicating that the power-on is successful.
3. After powering on, you can perform any button operation. The remote control
can support dual button operation at the same time. When you press any button, தி
COMMU light on the remote control will light up, indicating that this button is valid.

8.தயாரிப்பு செயல்பாட்டு வழிமுறைகள்
Before product development and use, you can use the demo software we provide to
test the buttons on the remote control and the LED light on the remote control. You can
also use the demo as a reference routine for future programming development.
Before using the Demo software, please plug the USB receiver into the computer,
make sure the remote controller has sufficient power, press and hold the power button to t
urn it on, and then use it;
When any button on the remote control is pressed, the test software demo will display
the corresponding key value. அதை வெளியிட்ட பிறகு, the key value display disappears,
indicating that the key upload is normal;
You can also select the LED light number on the test software demo, click download,
and the corresponding light number on the remote control will light up, indicating that the
LED light is downloading normally.

9.தயாரிப்பு சரிசெய்தல்

10. பராமரிப்பு மற்றும் கவனிப்பு

1. Please use it in a dry environment with normal temperature and pressure to extend
the service life;
2. Do not use sharp objects to touch the key area to extend the service life of the key;
3. Please keep the key area clean to reduce key wear;
4. Avoid squeezing and falling to cause damage to the remote control;
5. நீண்ட நேரம் பயன்படுத்தப்படாவிட்டால், please remove the battery and store the remote control
and battery in a clean and safe place;
6. Pay attention to moisture-proof during storage and transportation.

11.பாதுகாப்பு தகவல்

1. Please read the instructions carefully before use. Non-professionals are prohibited from
operating.
2. Please use the original charger or a charger produced by a regular manufacturer with the
same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing the
remote control to be unresponsive.
4. பழுது தேவைப்பட்டால், உற்பத்தியாளரை தொடர்பு கொள்ளவும். If the damage is caused by self-repair,
the manufacturer will not provide warranty.