1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 метр.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, Интихоби Сурай, magnification, and other information.
3. Дастгирии тугмаи фавқулодда, Гузариши сигнали IO, and the hand wheel shutdown emergency stop is still valid.
4. Дастгирӣ мекунад 6 Тугмаҳои фармоишӣ, switch IO signals, and can output signals to the system through IO wiring or communication.
Дастури дастии электронии дастӣ
Тасвирӣ
1. Муқаддима
Electronic handwheel is used for manual guidance, ҷойгузин, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, magnification, buttons, andother signals through communication.
2.Хусусиятҳои функсионалии маҳсулот
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 метр.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, Интихоби Сурай, magnification, and other information.
3. Дастгирии тугмаи фавқулодда, Гузариши сигнали IO, and the hand wheel shutdown emergency stop is still valid.
4. Дастгирӣ мекунад 6 Тугмаҳои фармоишӣ, switch IO signals, and can output signals to the system through IO wiring or communication.
5. Дастгирӣ мекунад 6 or 8 Назорати меҳвар, with switch IO signals that can be output to the system through IO wiring or communication.
6. Дастгирӣ мекунад 3 or 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 pulses/turn, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.
3. Тавсифоти маҳсулот
| Handwheel working power supply voltage | DC24V/1A |
| Шиддати таъминоти барқ | DC24V/1A |
| Receiver IO output load range | DC24V |
| Hand wheel end cable length | 10м |
| Receiver end cable length | 1м |
| Receiver end network cable length | 3м |
| Operating temperature | -25℃<Х<55℃ |
| Anti-fall height | 1м |
| Custom Button Quantity | 6 |
| Product dimensions | 233*90.7*77.4（mm） |
4.Product function introduction
Шарҳ:
Emergency stop button:
Press the emergency stop button, ва ду маҷмӯи қатъи фавқулодда IO-и IO дар қабулкунанда аз байн мебаранд, ва ҳама функсияҳои дастӣ беэътибор хоҳанд шуд.
After releasing the emergency stop, the emergency stop IO output on the receiver is closed, and all functions of the handwheel are restored.
② Screen display:
PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 Тугмаҳои фармоишӣ, Ҳар яки он ба нуқтаи баромади IO дар қабулкунанда мувофиқ аст, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Тугмаи Фондро пахш кунед ва нигоҳ доред, рамзи набзи пулро ларзонед, сигнали импулсро ба вуҷуд меорад, and control the movement of the machine axis.
⑧ Handwheel cable:
Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.
5. Диаграммаи лавозимоти иловагӣ
6. Дастури насбкунии маҳсулот
6.1 Қадамҳои насбкунии маҳсулот
6.1 Қадамҳои насбкунии маҳсулот
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Ба қабулкунандаи қабули варақаи мо муроҷиат кунед ва онро бо таҷҳизоти худ муқоиса кунед. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.
6.2 Андозагирии қабулкунандаро
6.3 Installation dimensions of aviation plugs
6.4 Қабулкунанда
7.Product Operation Instructions
7.Product Operation Instructions
1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.
2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.
3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.
4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Бовар кунед: Switch the magnification switch and select the magnification level you need.
7. Тринги ҳаракат: Тугмаи Фондро пахш кунед ва нигоҳ доред, Гузариши интихоби меҳварро интихоб кунед, Гузаришро интихоб кунед, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Press the emergency stop button, Натиҷаи амали фавқулоддаи IO-ро қатъ кардашуда қатъ карда мешавад, Функсияи дастӣ хомӯш карда мешавад, Тугмаи қатъии фавқулоддаро озод кунед, Натиҷаи фавқулодда IO пӯшида хоҳад шуд, ва функсияи дастӣ барқарор карда мешавад.
8.Тасвири намунавии маҳсулот
① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : represents the number of axis selection switches, represents axes, and represents
меҳвар.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, ва B - сигнали истеҳсоли маводи.
9.Product trouble shooting
10.Maintenance
1. Лутфан онро дар муҳити хушк дар ҳарорати хонагӣ ва фишор барои дароз кардани мӯҳлати хидматаш истифода баред.
2. Лутфан бо истифода аз муҳити ғайримуқаррарӣ, ба монанди борон ва футури об барои васеъ кардани мӯҳлати хизмат.
3. Лутфан пайдоиши дастро тоза кунед, то сатҳи хизмати худро васеъ кунад.
4. Лутфан аз фишурдани фишурда нашавед, афтидан, задан, ғайра. пешгирии зарар ба ҷузъҳои дақиқ дар дохили хатогиҳои дастӣ ё саҳеҳӣ.
5. Агар муддати дароз истифода нашавад, please store the handwheel in a clean and safe place.During storage and transportation, диққат бояд ба намӣ ва муқовимати шок дода шавад.
11. Маълумоти бехатарӣ
1. Лутфан дастурҳоро бодиққат пеш аз истифода ва манъ кардани мутахассисон аз кор таъмин кунед.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Агар таъмир бошад, Лутфан бо истеҳсолкунанда тамос гиред. Агар зиёне, ки бо таъмири худ ба вуҷуд меояд, истеҳсолкунанда кафолат намедиҳад
