CNC Masofadan boshqarish pulti – Wixhc texnologiyasi https://www.wixhc.cn Sanoat rahbari Mon, 22 Jun 2026 08:22:18 +0000 uz-UZ hourly 1 https://wordpress.org/?v=6.8.5 3D besh o'qli lazerli kesish uchun simsiz masofadan boshqarish pulti：PHB06B-LAZER https://www.wixhc.cn/product/programmable-cnc-wireless-remote-control-phb06b-laser Mon, 22 Jun 2026 08:03:47 +0000 https://www.wixhc.cn/?post_type=product&p=4693
1.Mahsulotni tanishtirish

The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, Qo'llab-quvvatlaydi 12 tugmasi, and supports real-time display of system coordinates and status.

2.Mahsulot xususiyatlari

1. 12 tugmasi, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5V-2A zaryadlash spetsifikatsiyasi, built-in battery specifications 18650/12775mWh.

3.Ishlar printsipi

PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.

Eslatma: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.

4.Mahsulot spetsifikatsiyalari
Qabul qiluvchi elektr energiyasini etkazib berish DC5V-DC24V
Button lifespan 1,000,000 vaqt
Operating Temperature
-25Shum < X < 55Shum
Safe drop height 1 shodlik
Receiver port Ethernet
Number of buttons
12
Display screen
2.8-inch color screen
wireless communication frequency 433MHz band
Receiver sensitivity
-100dbu
Handheld transmit power
15dbu
Simsiz aloqa masofasi 100 meters barrier-free range
Rechargeable Battery Specification Rechargeable Battery Specification
Charging base power supply voltage DC24V / 1A
Wired Charging Specification
 Type-C charging port, DC 5V/2A

 

5.Mahsulot funktsiyasi Kirish

Qaydlar:
① Power Switch
Used to turn the remote control on and off.

② Enable buttons on both sides

The enable button must be pressed while holding the remote control.

③Button area

12 tugmasi
④ Axis Selection and Magnification Switch

One 9-gear axis selection switch; one 3-gear magnification switch.

⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area

It can display coordinates, status and other information.

⑦ Electronic Pulse Encoder

One electronic pulse encoder with 100 pulses per revolution.

⑧ Type-C Charging Port

It is used for connection between the charger and the remote control.

The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key

6. Product Accessories Diagram

7. Receiver and Wiring Ports

8. Configure network access

9. Test Instructions

10. Installation dimensions

Qabul qiluvchilarni o'rnatish o'lchamlari
Unit: millimeters
Thickness: 29.6mm

11.Maintenance and upkeep

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, va hokazo. to prevent damage to the precision components

5. Avoid moisture and shock during storage and transportation.

12.Xavfsizlik haqida ma'lumot
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. If you repair it yourself and cause damage, the warranty will be void.
]]> Dasturlashtirilgan CNC simsiz phb06b masofadan boshqarish pulti https://www.wixhc.cn/product/programmable-cnc-wireless-remote-control-phb06b Mon, 16 Dec 2024 02:09:50 +0000 https://www.wixhc.cn/?post_type=product&p=4596  

1.Mahsulotni tanishtirish

Dasturlashtiriladigan CNC masofadan boshqarish pulti PHB06B simsiz aloqa uchun mos keladi
CNC tizimlarining masofadan boshqarish pulti. Bu foydalanuvchilarni qo'llab-quvvatlaydi
dasturlashni sozlash va masofadan boshqarish uchun tugma funksiyalarini ishlab chiqish
CNC tizimidagi turli funktsiyalarni boshqarish; foydalanuvchilarni qo'llab-quvvatlaydi
dinamikani amalga oshirish uchun dasturlashni sozlash va displey kontentini ishlab chiqish
tizim holatini ko'rsatish; masofadan boshqarish pulti qayta zaryadlanuvchi bilan birga keladi
battery and supports Type-C interface charging.

2.Mahsulot xususiyatlari

1. 433mhz simsiz aloqa texnologiyasidan foydalanish, simsiz operatsiya
masofa 80 metr;
2. Avtomatik chastotalarni ishga tushirish funktsiyasidan foydalanish, 32 simsiz masofadan turib
kontrollerlar bir-biriga ta'sir qilmasdan bir vaqtning o'zida ishlatilishi mumkin;
3. Qo'llab-quvvatlash 12 Shaxsiy tugmachani dasturlash;
4. 2,8 dyuymli ekranni qo'llab-quvvatlang, kontentni maxsus dasturlashni ko'rsatish;
5. Qo'llab-quvvatlash 1 6-tezlik o'qini tanlash tugmasi, maxsus dasturlashtirilishi mumkin;
6. Qo'llab-quvvatlash 1 7-tezlikni kattalashtirish tugmasi, maxsus dasturlashtirilishi mumkin;
7. Qo'llab-quvvatlash 1 elektron qo'llamoq, 100 pulslar / burilish;
8. Standard tipini tejash; 5V-2A zaryadlash spetsifikatsiyasi; batareya
specification 18650/12580mWh battery.

3.Ishlar printsipi

4. Mahsulot xususiyatlari

5.Mahsulot funktsiyasi Kirish

Qaydlar：
①Quvvat tugmasi：
Ochish va yopish uchun qo'l g'ildiragini boshqaring

②Ikkala tomondagi tugmalarni yoqish：
Qo'l g'ildiragini aylantirish uchun yoqish tugmasini bosish kerak;

③Maxsus tugmalar maydoni
12 tugmalar 3X4 o'lchamda joylashtirilgan, Foydalanuvchi tomonidan belgilangan dasturlash;

④O'qni tanlash, kattalashtirish tugmasi
1 6-pozitsiya o'qi tanlash tugmasi, moslashtirilgan va dasturlashtirilgan bo'lishi mumkin;
1 7-pozitsiya nisbati kaliti, moslashtirilgan va dasturlashtirilgan bo'lishi mumkin

⑤ Favqulodda to'xtash tugmasi:
Rulda favqulodda to'xtatish tugmasi;

⑥Displey maydoni:
Joriy quvvatni ko'rsatishi mumkin, signal, va moslashtirilgan displey kontenti;

⑦Elektron qo'l g'ildiragi：
1 elektron qo'llamoq, 100 pulses/turn.

⑧ Zaryadlash porti:

O'rnatilgan qayta zaryadlanuvchi batareya, Type-C zaryadlovchi yordamida quvvatlanadi, Voltaj 5V,
Hozirgi 1a-2a; zaryadlash vaqti 7 soat;

6.Mahsulot uchun aksessuarlar diagrammasi

7.Mahsulotni o'rnatish bo'yicha qo'llanma

1. USB qabul qilgichni kompyuterga ulang, Kompyuter avtomatik ravishda amalga oshiriladi
qo'lda o'rnatmasdan USB qurilma drayverini tanib o'rnating;
2. Masofadan boshqarish pultini zaryadlovchiga joylashtiring. Batareya to'liq zaryadlangandan keyin, burilish
quvvat kalitida, Masofadan boshqarish pultini yoqing, va displey normal ko'rinadi, qaysi
yoqish muvaffaqiyatli ekanligini anglatadi;
3. Yoqilganidan keyin, Siz har qanday tugmani amalga oshirishingiz mumkin. Masofadan boshqarish pulti mumkin
bir vaqtning o'zida ikkita tugma bilan ishlashni qo'llab-quvvatlang. Har qanday tugmani bosganingizda, qora
masofadan boshqarish pultidagi signal yonida kvadrat paydo bo'ladi, tugma ekanligini bildiradi
is valid.

8.Mahsulotni ishlatish bo'yicha ko'rsatmalar
Mahsulotni ishlab chiqish va ulardan foydalanishdan oldin, sinov uchun biz taqdim etgan Demo dasturidan foydalanishingiz mumkin
masofadan boshqarish pultidagi tugmalar va displey, yoki namunaviy dastur sifatida Demodan foydalaning
kelajakdagi dasturni ishlab chiqish;
Demo dasturidan foydalanishdan oldin, Iltimos, USB qabul qiluvchisini kompyuterga ulang, qilish
masofadan boshqarish pulti yetarli quvvatga ega ekanligiga ishonch hosil qiling, Quvvat tugmachasini yoqing, va keyin undan foydalaning;
Masofadan boshqarish pultidagi har qanday tugma bosilganda, test dasturi demosi ko'rsatiladi
mos keladigan kalit qiymati. Uni bo'shatgandan keyin, Asosiy qiymat displey yo'qoladi, shuni ko'rsatadi
the button upload is normal.

 

9.Mahsulotni bartaraf etish

 

10. Ta'minot va parvarish qilish

1. Iltimos, uni quruq muhitda normal harorat va siqish uchun bosim bilan ishlating
Xizmat hayoti;
2. Kalitning ishlash muddatini uzaytirish uchun kalit maydonchasiga tegish uchun keskin ob'ektlardan foydalanmang;
3. Iltimos, kalit kiyimni kamaytirish uchun kalit maydonini toza tuting;
4. Masofadan boshqarish pultiga zarar etkazish uchun siqish va yiqilishdan saqlaning;
5. Agar uzoq vaqt ishlatilmasa, Iltimos, batareyani chiqarib oling va masofadan boshqarish pultini saqlang va
batareyani toza va xavfsiz joyda saqlang;
6. Pay attention to moisture-proof during storage and transportation.

11.Xavfsizlik haqida ma'lumot

1. Foydalanishdan oldin ko'rsatmalarni diqqat bilan o'qing. Professional bo'lmaganlar taqiqlanadi
from operating.
2. Iltimos, asl zaryadlovchidan yoki oddiy ishlab chiqaruvchi tomonidan ishlab chiqarilgan zaryadlovchidan foydalaning
the same specifications.
3. Noto'g'ri ishlashga yo'l qo'ymaslik uchun o'z vaqtida zaryadlang
the remote control to be unresponsive.
4. Agar ta'mirlash talab qilinsa, Iltimos, ishlab chiqaruvchi bilan bog'laning. Agar zarar sabab bo'lsa
o'z-o'zini ta'mirlash, the manufacturer will not provide warranty.

]]> CNC simsiz protsessorli protsessorli phb10 dasturi https://www.wixhc.cn/product/programmable-cnc-wireless-remote-control-phb10 Thu, 28 Nov 2024 07:09:07 +0000 https://www.wixhc.cn/?post_type=product&p=4569

1.Mahsulotni tanishtirish

CNC Masofadan boshqarish pulti pHB10 simsiz ulanish uchun mos keladi
CNC tizimlarining masofadan boshqarish pulti. U foydalanuvchi tomonidan belgilangan
Tekshirish funktsiyalarini ishlab chiqish uchun dasturlash, va turlilarni masofadan boshqarish pultini amalga oshirish
CNC tizimidagi funktsiyalar; U ishlab chiqiladigan foydalanuvchi tomonidan belgilangan dasturlarni qo'llab-quvvatlaydi
LED chiroqlari yonish va o'chirish uchun, va tizimning dinamik ko'rinishini amalga oshiring;
Masofadan boshqarish pulti qayta zaryadlanuvchi batareya va qo'llab-quvvatlaydigan batareya bilan birga keladi
interface charging.

2.Mahsulot xususiyatlari

1. 433mhz simsiz aloqa texnologiyasidan foydalanish, simsiz operatsiya
masofa 80 metr;
2.Avtomatik chastotalarni ishga tushirish funktsiyasidan foydalanish, 32 simsiz masofadan turib
kontrollerlar bir-biriga ta'sir qilmasdan bir vaqtning o'zida ishlatilishi mumkin;
3.Qo'llab-quvvatlash 32 Shaxsiy tugmachani dasturlash;
4.Qo'llab-quvvatlash 9 Maxsus LED chiroq displey dasturlash dasturi;
5.IP67 suv o'tkazmaydigan darajada qo'llab-quvvatlang;
6.Standard tipice-c interfeysi zaryadini qo'llab-quvvatlang; 5V-2A zaryadlash spetsifikatsiyasi;
1100 MAH katta sig'imli batareya, Avtomatik uyqu kutish funktsiyasi bilan; anglamoq
Ultra-uzun kam quvvatlilik kutish;
7.Support real-time display of power.

3.Ishlar printsipi

4. Mahsulot xususiyatlari

5.Mahsulot funktsiyasi Kirish

Qaydlar：
①baty darajasini ko'rsatish：
Quvvatdan keyin yonadi, quvvatdan keyin o'chadi;
Agar batareya ko'rsatkichi yorug'ligi faqat bitta bar bo'lsa va miltillaydi, Bu degani
batareya juda past. Iltimos batareyani almashtiring;

Agar batareya ko'rsatkichi chiroqlari bo'lsa va boshqa LED chiroqlari orqaga va
oldinga, Bu batareya juda pastligini anglatadi. Iltimos batareyani almashtiring;
Agar batareya ko'rsatkichi yonmasa yoki tashqariga chiqsa, va qurilma bo'lishi mumkin emas
Quvvat tugmachasini bosib ushlab turib boshladi, Iltimos batareyani almashtiring;

②button maydoni：32 4x8-da tashkil etilgan tugmalar, Foydalanuvchi tomonidan belgilangan dasturlash;

③status LED：
Komatlik: Tugmani indikator yorug'ligi, tugma bosganda yonadi va ketadi
tugma qo'yganda; Boshqa chiroqlar - bu maxsus displeylar;

Gower tugmachasi：
Uzoq matbuot 3 Sekunding yoqish uchun, Uzoq matbuot 3 O'chirish uchun soniya;
⑤⑤arardate port：
Zaryadlash uchun tip-c zaryadlovchidan foydalaning, Voltaj 5V, Hozirgi 1a-2a; zaryadlash
vaqt 3-5 soat;

Zaryadlashda, Quvvat ko'rsatkichi yonadi, u zaryadlash ekanligini ko'rsatadi. Qachon
To'liq zaryadlangan, the power indicator will show full bar without flashing.

6.Mahsulot uchun aksessuarlar diagrammasi

7.Mahsulotni o'rnatish bo'yicha qo'llanma

1 . Men USB qabul qilgichini kompyuterga yuboraman, Kompyuter avtomatik ravishda amalga oshiriladi
USB qurilmasini tan olish va qo'lda o'rnating
2. Masofadan boshqarish pultini zaryadlovchiga joylashtiring. Batareya to'liq zaryadlangandan keyin, bosmoq
va quvvat tugmasini bosib ushlab turing 3 soniya. Masofadan boshqarish pulti yoqiladi va quvvat
Ko'rsatkich yonadi, indicating that the power-on is successful.
3. Yoqilganidan keyin, Siz har qanday tugmani amalga oshirishingiz mumkin. Masofadan boshqarish pulti
bir vaqtning o'zida ikki tugmachasini qo'llab-quvvatlashi mumkin. Har qanday tugmani bosganingizda, bu
Masofadan boshqarish pultidagi komu nuri yonadi, indicating that this button is valid.

8.Mahsulotni ishlatish bo'yicha ko'rsatmalar
Mahsulotni ishlab chiqish va ulardan foydalanishdan oldin, Siz taqdim etgan demo dasturidan foydalanishingiz mumkin
Masofadan boshqarish pultidagi masofadan boshqarish pultidagi tugmachalarni va LED chiroqlarini sinab ko'ring. Siz .. qila olasiz; siz ... mumkin
also use the demo as a reference routine for future programming development.
Demo dasturidan foydalanishdan oldin, Iltimos, USB qabul qiluvchisini kompyuterga ulang,
Masofadan boshqarish moslamasi etarli quvvatiga egaligiga ishonch hosil qiling, POWER tugmasini t ga bosib ushlab turing
urn, va keyin undan foydalaning;
Masofadan boshqarish pultidagi har qanday tugma bosilganda, Sinov dasturi demo namoyish etadi
tegishli asosiy qiymat. Uni bo'shatgandan keyin, Asosiy qiymat displey yo'qoladi,
Kalit yuklash normal ekanligini bildiradi;
Siz shuningdek, sinov dasturiy ta'minotining dremo-da LED yorug'lik raqamini tanlashingiz mumkin, Yuklash-ni bosing,
Masofadan boshqarish pultidagi mos keladigan yorug'lik raqami yonadi, shuni ko'rsatadiki
LED light is downloading normally.

9.Mahsulotni bartaraf etish

10. Ta'minot va parvarish qilish

1. Iltimos, uni quruq muhitda normal harorat va siqish uchun bosim bilan ishlating
Xizmat hayoti;
2. Kalitning ishlash muddatini uzaytirish uchun kalit maydonchasiga tegish uchun keskin ob'ektlardan foydalanmang;
3. Iltimos, kalit kiyimni kamaytirish uchun kalit maydonini toza tuting;
4. Masofadan boshqarish pultiga zarar etkazish uchun siqish va yiqilishdan saqlaning;
5. Agar uzoq vaqt ishlatilmasa, Iltimos, batareyani chiqarib oling va masofadan boshqarish pultini saqlang
va batareya toza va xavfsiz joyda;
6. Pay attention to moisture-proof during storage and transportation.

11.Xavfsizlik haqida ma'lumot

1. Foydalanishdan oldin ko'rsatmalarni diqqat bilan o'qing. Mutaxassis bo'lmaganlar taqiqlangan
operating.
2. Iltimos, odatdagi ishlab chiqaruvchi tomonidan ishlab chiqarilgan asl zaryadlash yoki zaryadlovchidan foydalaning
same specifications.
3. Iltimos, kuchning etishmasligi tufayli noto'g'ri ishlashni oldini olish uchun o'z vaqtida to'lovni amalga oshiring
remote control to be unresponsive.
4. Agar ta'mirlash talab qilinsa, Iltimos, ishlab chiqaruvchi bilan bog'laning. Agar zarar o'zini o'zi ta'mirlash bilan bog'liq bo'lsa,
the manufacturer will not provide warranty.

]]> Dasturlashtirilgan CNC simsiz simsiz protsessor https://www.wixhc.cn/product/programmable-cnc-wireless-remote-control-phb09-etsl-for-siemens Mon, 30 Mayl 2022 05:54:49 +0000 https://www.wixhc.cn/?post_type=product&p=4396

]]> Dasturlashtirilgan CNC simsiz ulanish / lazerni kesish dastagini fb09 https://www.wixhc.cn/product/programmable-cnc-wireless-remote-control-laser-cutting-handle-phb09 Mon, 21 Feb 2022 05:26:56 +0000 https://www.wixhc.cn/?post_type=product&p=4258

]]> 4/6 Axis USB CNC Controler dasturi Masofadan boshqarish pulti PHB04B https://www.wixhc.cn/product/program-remote-control-phb04b Tue, 10 Dec 2019 08:53:42 +0000 https://www.wixhc.cn/?post_type=product&p=3676

]]> Masofadan boshqarish pulti PHB02B-ni simsiz aloqa dasturi https://www.wixhc.cn/product/programmable-wireless-second-development-program-remote-control-phb02b Tue, 10 Dec 2019 08:22:22 +0000 https://www.wixhc.cn/?post_type=product&p=3668

 

]]> Mundantni simsiz simsiz rivojlanish dasturi Masofadan boshqarish vositasi FB02 https://www.wixhc.cn/product/programmable-cnc-remote-control-phb02 Tue, 10 Dec 2019 06:34:55 +0000 https://www.wixhc.cn/?post_type=product&p=3646

]]>