Siemenlarga xos qo'llanma – Wixhc texnologiyasi https://www.wixhc.cn Industry Leader Wed, 05 Nov 2025 06:21:59 +0000 uz-UZ hourly 1 https://wordpress.org/?v=6.8.3 Simli elektron qo'lda turadigan qo'llanma qo'llanma https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Mahsulotni tanishtirish

Elektron qo'ldaelel qo'lda qo'llanmalar uchun ishlatiladi, joylashtirish, asbobni tekislash, va boshqa operatsiyalar CNC mashinasozlik vositalarida. Elektron ishning ushbu modeli - bu siemens haqiqiy displeyli simli elektron qo'lda. Qo'l parda tarmoq kabeli orqali Siemens tizimining X130 interfeysiga ulangan, va tizim koordinatalari S7 protokoli aloqasi orqali qo'lning LCD displeyida o'qiladi va ko'rsatiladi. Qo'lda, shuningdek, tizim o'qini tanlashni boshqarishi mumkin, kattalashtirish, tugmasi, andother signals through communication.
2.Mahsulot funktsional xususiyatlari
1. Ulanish uchun 6-yadriy aviatsiya vilkasidan foydalaning, Qo'lda kabel uzunligi bilan 10 meters.
2. Qo'l paramenti tizimining ishi bo'yicha koordinatalarini namoyish qilishi mumkin, Mexanik koordinatalar,Ozuqa kursi, O'q tanlash, kattalashtirish, and other information.
3. Shoshilinch stop tugmasini qo'llab-quvvatlang, IO signal chiqishini yoqing, and the hand wheel shutdown emergency stop is still valid.
4. Qo'llab-quvvatlaydi 6 Shaxsiy tugmachalar, IO signallarini almashtiring, and can output signals to the system through IO wiring or communication.
5. Qo'llab-quvvatlaydi 6 yoki 8 o'qni boshqarish, with switch IO signals that can be output to the system through IO wiring or communication.
6. Qo'llab-quvvatlaydi 3 yoki 4 Kattalashtirish nazorati darajasi, with switch IO signals that can be output to the system through IO wiring or communication.
7. Puls kodini qo'llab-quvvatlash, 100 pulslar / burilish, can output signals to the system through AB pulse wiring.
8. Siemens S7 Protokol va Siemens 828D-ni qo'llab-quvvatlaydi, 840Dsl, ONE and other model systems.

 

3. Mahsulot xususiyatlari
Qo'lda ishlaydigan elektr ta'minoti kuchlanish DC24V / 1A
Qabul qiluvchi elektr energiyasini etkazib berish DC24V / 1A
Qabul qilgich IO chiqishi oralig'i DC24V
Qo'l g'ildiragi uchi kabel uzunligi 10shodlik
Qabul qiluvchining oxirgi kabel uzunligi 1shodlik
Qabul qiluvchi tarmoq kabel uzunligi 3shodlik
Ishlash harorati -25Shum<X<55Shum
Yiqilishga qarshi balandlik 1shodlik
Custom tugmasi soni 6
Mahsulot o'lchamlari 233*90.7*77.4(Mm)

4.Mahsulot funktsiyasi Kirish

Eslatma:
Favqulodda vaziyatni o'chirish tugmasi:
Shoshilinch STOP tugmasini bosing, Qabul qilgichda ikkita favqulodda vaziyatning ikkinchi to'plamlari uziladi, and all functions of the handwheel will be invalid.
Favqulodda vaziyatni bo'shatishdan keyin, Qabul qilgichda IO chiqishini to'xtating, and all functions of the handwheel are restored.
② Ekran displeyi:

 

Plek: 0000 tarmoq kabeli ulanmaganligini bildiradi, Plek: 1010 indicates that the network cable is successfully connected to the PLC system.
Plek: 1110 tizimli ma'lumotlarni muvaffaqiyatli yozishni anglatadi, Plek: 0001 represents successful connection to the computer.
 Shaxsiy tugma:
6 Shaxsiy tugmachalar, qabul qilgichda IO chiqish nuqtasiga mos keladigan har biri, also connected to the system through communication.
④ o'q tanlash tugmasi:
The axis selection switch can switch the movement axis controlled by the handwheel.
 tugmasini yoqish:
Puls kodini silkitib, uni silkitib yuborish uchun har ikki tomonning tugmachasini bosing va ushlab turing. Qabul qiluvchining ikki guruhi IO chiqish uchun IO chiqishini ta'minlaydi, release the enable button to enable IO output to disconnect.
⑥ Kattalashtirish tugmachasi:Kattalashtirish tugmachasi kattalashtirishni yoqishi mumkin
controlled by the handwheel.
Pulse koder:
Yoqish tugmachasini bosing va ushlab turing, Puls kodini silkit, puls signalini chiqaradi, and control the movement of the machine axis.
⑧ Qat'iy kabel:

Qo'lda va qabul qiluvchini bog'laydigan kabel, Aviatsiya vilkasi, used for handwheel power supply and communication.

5. Mahsulotning qo'shimcha diagrammasi

6. Mahsulotni o'rnatish bo'yicha qo'llanma
6.1 Mahsulotni o'rnatish bosqichlari
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Qabul qiluvchiimiz sigrammasiga murojaat qiling va uni saytdagi uskunalar bilan taqqoslang. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Qabul qilgichni tuzatgandan so'ng, paneldagi qo'lning ochilish holatida aviatsiya vilkasini o'rnating, va bazaning boshqa uchini qabul qilgichning qo'lvalel interfeysiga ulang. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Qabul qiluvchilarni o'rnatish o'lchamlari

6.3 Aviatsiya vilkasining o'lchamlarini o'rnatish

6.4 Qabul qiluvchining sxemasi
7.Mahsulotni ishlatish bo'yicha ko'rsatmalar

1. Qabul qilgich yoqilganda va qabul qilgichning ishini o'lchash yonadi, Qabul qilgichni tarmoq kabeli bilan kompyuterga ulang, Kompyuterning sobit IP manzilini o'rnating, va Qo'lda keladigan funktsiyaning tarmoq parametrlarini o'rnatish uchun tarmoq konfiguratsiyasi vositasidan foydalaning. Muayyan belgilash usullari uchun, ga qarang “LXWGP-NARXI SIVED HUQUQIY USAL foydalanuvchi qo'llanmasi”.

2.Qabul qilgich sozlangandan keyin, Tizim PLC dasturini dasturlashi kerak. Iltimos, murojaat qiling “LXWGP-QURILISHI SIEMENTNING RAQAMNI SELICE ni sozlash usullari” and PLC program routine materials for details.

3.Yuqoridagi sozlamalarni tugatgandan so'ng, Qabul qilgichni elektr shkafiga olib chiqing va uni o'rnating. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.Yuqoridagi sozlamalarni tugatgandan so'ng, Qabul qilgichni elektr shkafiga olib chiqing va uni o'rnating. Tarmoq kabelini kompyuterdan chiqarib oling va uni tizimning X interfeysiga ulang. Connect the receiver power supply and pulse line.
5. Axisni tanlash-ni tanlang: Switch the axis selection switch and select the axis you want to operate on.
6. Kattalashtirish-ni tanlang: Switch the magnification switch and select the magnification level you need.
7. Harakatlanuvchi o'q: Yoqish tugmachasini bosing va ushlab turing, O'q tanlash tugmasini tanlang, Kattalashtirish tugmachasini tanlang, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Qabul qilgichda IO chiqishini yoqish uchun har qanday shaxsiy tugmachasini bosing va ushlab turing, and release the button to turn off the output.
9. Shoshilinch STOP tugmasini bosing, Qabul qilgichning chiqishi bo'yicha tegishli favqulodda vaziyat o'chiriladi, Qo'ldaval funktsiyasi o'chiriladi, Favqulodda vaziyatni o'chirish tugmasini bo'shating, IO chiqish uchun favqulodda vaziyat yopiq bo'ladi, and the handwheel function will be restored.
8.Mahsulot model tavsifi

① LXWGP Simli tashqi ko'rinishga ega ekanligini anglatadi, va oluvchi aloqa interfeysi
is an Ethernet interface.
Shum : Represents Siemens system specific.
Shum : o'qni tanlash tugmachalari sonini anglatadi, o'qlarni anglatadi, va ifodalaydi
axes.
Shum : o'qni tanlash va kattalashtirish signali turini anglatadi, Ifodalaydi
Nuqta-band chiqish signali, and B represents encoded output signal.

9.Mahsulotni tortishish muammosi

10.Parvarishlash
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Iltimos, siqilishdan saqlaning, yiqilish, urish, va hokazo. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Agar uzoq vaqt ishlatilmasa, Iltimos, qo'lni toza va xavfsiz joyda saqlang. Saqlash va tashish, attention should be paid to moisture and shock resistance.
11. Xavfsizlik haqida ma'lumot

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Agar biron bir g'ayritabiiy vaziyat qo'lda, Iltimos, uni darhol ishlatishni to'xtating va muammolarni bartaraf eting. Muammolarni bartaraf etishdan oldin, Noma'lum qo'ldagi kamchiliklar tufayli yuzaga kelgan xavfsizliksiz hodisalardan qochish uchun yana nosozliklardan foydalanish taqiqlanadi;
3. Agar ta'mirlash talab qilinsa, Iltimos, ishlab chiqaruvchi bilan bog'laning. Agar zarar o'z-o'zini ta'mirlash natijasida yuzaga kelsa, Ishlab chiqaruvchi kafolat bermaydi

 

]]> CNC Vertikal Late operatsion ko'rsatmalari uchun simsiz simsiz ulanish https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Mahsulotni tanishtirish

CNC Vertikal Lates uchun simsiz simsiz ulanish qo'llanmasi qo'llanma qo'llaniladi, joylashtirish, Toolni sozlash, va CNC vertikal dastgohlarda boshqa operatsiyalar. Ushbu mahsulot simsiz uzatish texnologiyasini qabul qiladi, An'anaviy bahorning ulanishlarini bartaraf etish, Kabellar tomonidan kelib chiqadigan uskunalar etishmovchiligini kamaytirish, va kabelni sudrab olish va neft dog'larining kamchiliklarini bartaraf etish, operatsiyani yanada qulayroq qilish. Bu CNC Vertikal Lates kabi turli vertikal ko'tarilish uchun keng qo'llaniladi, bir-ustun vertikal choyshablar, va ikki ustunli vertikal uzunliklar. Shuningdek, bozordagi CNC tizimlariga moslashtirilishi mumkin, Siemens kabi,
Mitsubishi, Telba, and Syntec.

2. Mahsulot funktsional xususiyatlari

1. Qabul qilish 433 Mhz simsiz aloqa texnologiyalari, simsiz operatsiya masofasi bilan 40 meters.
2.Avtomatik chastotani avtomatik ravishda sakrash funktsiyasini qabul qilish va foydalanish 32 Simsiz masofadan boshqarish moslamasining to'plamlari bir vaqtning o'zida, without affecting each other.
3. Shoshilinch stop tugmasini qo'llab-quvvatlang, switch IO signal output.
4. Qo'llab-quvvatlaydi 2 Makkalanadigan tugma, with switch-type IO signal output.
5. Qo'llab-quvvatlaydi -2 axis control.
6. Supports 3-level magnification control.
7. ENG ENG YAXSHI QO'ShIMChA, IO signallari va o'qi yoki o'qishni tanlash mumkin bo'lgan narsalarni chiqarish mumkin, Muloqotni ko'paytirish, va kodlovchi.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Puls kodini qo'llab-quvvatlaydi, spetsifikatsiya bilan 100 pulses per revolution.
3. Mahsulot xususiyatlari
Simsiz masofadan boshqarish kuchlanish va oqim oqimi
3V / 14MA
Batareya shartlari 2 Aa ishqorli batareyalar, size 5
Simsiz masofadan turib ishlaydigan signal signallari < 2.3Voyaga yettirmoq
Qabul qiluvchi elektr energiyasini etkazib berish DC5V-24V / a
Qabul qilgichning favqulodda chiqishini yuklash oralig'i AC125V-1A / dc30v-2a
Qabul qiluvchi chiqishlarni yuklash oralig'ini yoqing
AC125V-1A / dc30v-2a
Qabul qilish uchun Custome tugmasi chiqish diapazoni Dc24v / 50ma
Qabul o'qini tanlash chiqish doirasi Dc24v / 50ma
Qabul qilgichni kattalashtirish chiqish oralig'i Dc24v / 50ma
Qo'lli terminalni uzatish kuchi
15dbu
Sezgirlikni qabul qiluvchi qabul qiluvchi -100dbu
Simsiz aloqa chastotasi 433Mhz chastotasi guruhi
Simsiz aloqa masofasi To'siqsiz masofa 40 metr
Operatsion harorat -25Shum < X < 55Shum
Funga qarshi balandlik 1 (o'lchagich)
Custom tugmasi soni 2
4. Mahsulot funktsiyasi Kirish



Qaydlar:

Pulse koder:
Yoqish tugmachasini bosing va ushlab turing, Puls kodini silkit, puls signalini chiqaradi,and control the movement ofthe machine axis.
 tugmasini yoqish:
Ikkala tomonni yoqish tugmasini bosing, va qabul qilgichda IO chiqishlarining ikkita to'plamini olib boradi. IO chiqishini o'chirish uchun yoqilgan tugmani bo'shatish; Va o'qni tanlash tugmachasini yoqishdan oldin va qo'lingizni silkitmasdan oldin,Samarali bo'lish uchun yoqilishi kerak; This function can be cancelled through configuration software.

④ Indikator chiroqlari:
Chap tomoni chiroq: Yorug'likdagi kuch,Qo'lda ishlaydigan qo'lda ekish uchun o'qdan foydalaniladi, va bu yorug'lik yoqilgandan keyin qoladi;
O'rta yorug'lik: Qo'lning har qanday funktsiyasini ishlatishda yonadigan signal yorug'ligi, va operatsiya bo'lmaganda yonmaydi;
O'ng tomon yorug'ligi: Kam voltli signallar yorug'ligi, Batareya darajasi past,bu rulfşes yoki davom etadi, battery needs to be replaced.

The Favqulodda Stop tugmasini bosing:
Shoshilinch STOP tugmasini bosing, Qabul qilgichda ikkita favqulodda vaziyatning ikkinchi to'plamlari uziladi, and all functions of the handwheel will be invalid.

⑤ Kattalashtirish tugmachasi:
Kattalashtirish tugmachasini yoqish uchun yoqish tugmachasini bosing va ushlab turing, which can switch the magnification controlled by the handwheel.

⑥ o'q tanlash tugmasi (Quvvat tugmasi):
O'qni tanlash tugmachasini almashtirish uchun yoqilgan tugmani bosing va ushlab turing, Qarin tomonidan boshqariladigan harakat o'qini almashtirish mumkin. Switch this switch from OFF to any axis and turn on the handwheel power.

 Shaxsiy tugma:
Ikkita maxsus tugmacha, each corresponding to an IO output point on the receiver.

5. Mahsulotning qo'shimcha diagrammasi

6. Mahsulotni o'rnatish bo'yicha qo'llanma
6.1 Mahsulotni o'rnatish bosqichlari

1. Qabul qilgichni orqa tomondan tutqich orqali elektr kabinetiga o'rnating, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Qabul qiluvchiimiz sigrammasiga murojaat qiling va uni saytdagi uskunalar bilan taqqoslang. Connect the equipment to the receiver via cables.
3.Qabul qiluvchining to'g'ri belgilanganidan keyin, Qabul qilgich bilan jihozlangan antenna ulanishi kerak, antennaning tashqi uchi elektr kabinetidan tashqarida o'rnatilishi yoki joylashtirilgan bo'lishi kerak. Uni eng yaxshi signal effektiga elektron kabinetning yuqori qismida joylashtirish tavsiya etiladi. Antennadan bexabar yoki uni elektr kabinetida qoldirish taqiqlanadi, as this may result in the signal being unusable.
4. Nihoyat, Quvvatning elektr tugmachasini yoqing, and you can operate the machine remotely using the handwheel.

6.2 Qabul qiluvchilarni o'rnatish o'lchamlari

6.3 Qabul qiluvchining sxemasi

7. Mahsulotni ishlatish bo'yicha ko'rsatmalar
1. Mashina va trubkadagi quvvat. Qabul qiluvchining ish indikatori engil yonadi. Batareyani simsiz elektron qo'lda o'rnating, Batareya qopqog'ini mahkamlang, va
Simsiz elektron qo'lda ishlaydigan elektr tugmachasini yoqing. The handwheel’s battery level indicator light is on.
2. Koordinata o'qini tanlang: Yoqish tugmachasini bosing va ushlab turing, Axisni tanlash tugmachasini o'zgartiring, and select the axis you want to operate.
3. Kattalashtirish-ni tanlang: Yoqish tugmachasini bosing va ushlab turing, Kattalashtirish tugmachasini o'zgartiring,and select the desired magnification level.
4. Harakatlanuvchi o'q: Yoqish tugmachasini bosing va ushlab turing, O'q tanlash tugmasini tanlang, Kattalashtirish tugmachasini tanlang, keyin puls kodini aylantiring. Soat yo'nalishi bo'yicha aylantiring
positive axis and counterclockwise to move the negative axis.
5. Har qanday maxsus tugmani bosib ushlab turing, va qabul qilgichning IO chiqish tugmachasini yoqing. Tugmachani bo'shating, and the output will be turned off.
6. Shoshilinch STOP tugmasini bosing, Qabul qilgichning chiqishi bo'yicha tegishli favqulodda vaziyat o'chiriladi, Qo'ldaval funktsiyasi o'chiriladi,Favqulodda vaziyatni o'chirish tugmasini bo'shating, IO chiqish uchun favqulodda vaziyat yopiq bo'ladi, and the handwheel function will be restored.
7. Agar qo'lhotvalda vaqt davomida ishlamagan bo'lsa, Quvvat sarfini kamaytirish uchun u avtomatik ravishda uyqu rejimiga kiradi. Qayta ishlatilganda, the handwheel can be activated by pressing the enable button.
8. Agar qo'lhirheel uzoq vaqt davomida ishlatilmasa, Qo'ldayalshni o'chirish holatiga o'tkazish tavsiya etiladi, Qo'l quvvatini o'chiring, and extend the battery life.

8. Mahsulot model tavsifi

Shum :Ztwgp tashqi ko'rinishi uslubini anglatadi
Shum：Pulse chiqish parametrlari:
01: Puls chiqish signali a, B; Pulse kuchlanish 5V; pulse quantity 100PPR.
02：Pulse chiqinishi signallari a va b; Pulse kuchlanishi 12V; pulse quantity 100PPR.
03：Bu ishonch signallari a, B, A -, B -; Pulse kuchlanish 5V; pulse quantity 100PPR.
04：Past darajadagi NPN Ochiq tutun chiqishini bildiradi, a va b-ning puls chiqish signallari bilan;The number of pulses is 100PPR.
05：Yuqori darajadagi PNP manbali chiqishini bildiradi, a va b-ning puls chiqish signallari bilan; The number of pulses is 100PPR.
Shum：Axis tanlash tugmachalari sonini ifodalash, 2 ifodalaydi 2 axes.
Shum：O'qni tanlash signali turini anglatadi, Bir nuqta-punktning chiqish signalini anglatadi, and B represents encoded output signal.
Shum：Ko'prog'ini almashtirish signalining turini anglatadi, Bir nuqta-punktning chiqish signalini anglatadi, and B represents encoded output signal.
Shum：Odatdagi tugmalarni ifodalaydi, 2 ifodalaydi 2 custom buttons.
Shum：Tizimni ishlaydigan tizimga quvvat berish, va 05 represents 5V power supply.
Shum：L chap ustunni anglatadi (Chap pichoq ushlagichi), va r o'ng ustunni anglatadi (O'ng pichoq ushlagichi).

9.Mahsulot nosozliklarini yechim

10. Mahsulotni ta'minlash

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Iltimos, siqilishdan saqlaning, yiqilish, urish, va hokazo. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Agar uzoq vaqt ishlatilmasa, Iltimos, qo'lvalini toza va xavfsiz joyda saqlang. Saqlash va tashish paytida, attention should be paid to moisture and shock resistance.

11. Xavfsizlik haqida ma'lumot

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Agar ta'mirlash talab qilinsa, Iltimos, ishlab chiqaruvchi bilan bog'laning. Agar zarar o'z-o'zini ta'mirlash natijasida yuzaga kelsa, Ishlab chiqaruvchi kafolat bermaydi

]]> Mancik simsiz elektron qo'lda https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 Mayl 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Mahsulotni tanishtirish

Qo'lda qo'llanma uchun simsiz elektron qo'lda, joylashtirish, asbobni tekislash,va boshqa operatsiyalar CNC mashinasozlik vositalarida. Ushbu mahsulot simsiz uzatish texnologiyasini qabul qiladi, An'anaviy bahor simlari bilan bog'liq, Kabellar tomonidan kelib chiqadigan uskunalar etishmovchiligini kamaytirish, eliminating the disadvantages of cable dragging and oil stains, va operatsiyani yanada qulayroq qilish. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,kattalashtirish, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Mahsulot xususiyatlari
1. 433mhz simsiz aloqa texnologiyasini qabul qiling, Simsiz operatsiya masofa 40 metr;
2. Avtomatik chastotalarni o'chirish funktsiyasini qabul qiling, foydalanish 32 sets of wireless remote controllers at the same time without affecting each other;
3. Shoshilinch stop tugmasini qo'llab-quvvatlang, IO signal chiqishini yoqing, connected to the system through IO wiring;
4. Qo'llab-quvvatlash 4 Shaxsiy tugmachalar, IO signalini yoqing, IO-LINK protokoli orqali tizimga chiqish signali;
5. Tez harakatlanish tugmasini qo'llab-quvvatlang + va tugma -, Mashinani ko'chirish uchun qo'lingini almashtirish uchun tugmani bosing va ushlab turing;
6. 6 o'qi nazoratini qo'llab-quvvatlash, IO signalini yoqing, IO-LINK protokoli orqali tizimga chiqish signali;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Puls kodini qo'llab-quvvatlash, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Qaydlar:
①Emergence Stop tugmasi:
Shoshilinch STOP tugmasini bosing, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 Shaxsiy tugmachalar, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Yoqish tugmachasini bosing va ushlab turing va pulsni yuborish uchun puls kodini silkiting
signal to control the movement of the machine axis.
⑨Power switch:
Handwheel power button.

5.Mahsulot uchun aksessuarlar diagrammasi

6.Mahsulotni o'rnatish bo'yicha qo'llanma

6.1 Mahsulotni o'rnatish bosqichlari

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Qabul qiluvchiimiz sigrammasiga murojaat qiling, Uni saytingizdagi uskunalar bilan taqqoslang, va ulanish
the equipment to the receiver via cables.
3. Qabul qilgich tuzilgandan keyin, Qabul qilgich bilan jihozlangan antenna ulanishi kerak,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Uni eng yaxshi signal effektiga elektron kabinetning yuqori qismida joylashtirish tavsiya etiladi. U
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4.Nihoyat, Qo'l quvvatini yoqish va siz mashinani boshqarishingiz mumkin
handwheel remote control.

6.2 Qabul qiluvchilarni o'rnatish o'lchamlari

6.3 Qabul qiluvchining sxemasi

7. Ta'minot va parvarish qilish

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
Xizmat hayoti;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Iltimos, siqilishdan saqlaning, yiqilish, urish, va hokazo. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Agar uzoq vaqt ishlatilmasa, Iltimos, qo'lvalini toza va xavfsiz joyda saqlang;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Foydalanishdan oldin ko'rsatmalarni diqqat bilan o'qing. Mutaxassis bo'lmaganlar taqiqlangan
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Agar ta'mirlash talab qilinsa, Iltimos, ishlab chiqaruvchi bilan bog'laning. Agar zarar o'zini o'zi ta'mirlash bilan bog'liq bo'lsa,
the manufacturer will not provide warranty.

]]> Siemens simsiz elektron qo'lda https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 Mayl 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Masofadan boshqarish pultini joriy etish

A.Product Comshodition
Siemens real vaqtli koordinata displey simsiz elektron qo'lda ikki qismdan iborat: elektron qo'llamoq + qabul qilgich;

B.Sarteragress

*Siemens Plc-ni qo'llab-quvvatlang: S7-200 / -300 / -1200；Siemens tizimi koordinatalari real vaqtini qo'llab-quvvatlash；
*Simsiz uzatish masofasi ochiq 40 metr, Avtomatik chastotalarni o'chirish texnologiyasi, foydalanish mumkin 32 bir vaqtning o'zida uskunalar to'plamlari;
*Elektron qo'lherveel kuchga kiradi 2 AA batareyalari va ko'proq foydalanish mumkin 30 kunlar;
*Qabul qilgich signalni kuchaytirish uchun tashqi antenna bilan jihozlangan va o'rnatilishi oson;
*Elektron ishlov berish: 100 profil kodeker 、bitta 6 taster o'qini tanlash tugmasi 、 bitta 3-tezlik kattalashtirish tugmachasi;
*Elektron ishlov berish 6 Shaxsiy tugmachalar, Siemens Plc manziliga mos keladi, tekin dasturlashtirilgan bo'lishi mumkin;

*6 Custom tugmalarini boshqarish mumkin 6 Chiqishlarni almashtirish;
*Ekran ekranlari real vaqt rejimida mos keladigan ro'yxatga olish koordinatsiyasi, and supports 6-axis display of real-time coordinates.

2.Ilova maydoni

Dasturlashtirilgan CNC Masofadan boshqarish pulti, masalan, LASER grajar tizimi kabi turli xil CNC sohalarida keng qo'llaniladi, CNC FREDIRING MASHINALARI, CNC Ishlov berish markazi, Ganery Mashinasozlik, va hokazo.

3. Ish haqi tamoyiliga kirish

1) Elektron ishlov berish Ethernet qabul qiluvchisi orqali plc ga ulangan

A. Qo'l ma'lumotlarini oluvchiga simsiz o'tkazadi, va qabul qilgich tugmachalarni tarmoq kabeli plc tizimi orqali yozdi; Qabul qilgich belgilangan DB hududidan namoyish qilinishi kerak bo'lgan ma'lumotlarni o'qiydi, va keyin ma'lumotlarni qo'lworeel displey ekraniga qaytaradi. Foydalanuvchi qo'lning asosiy manzilini soddalashtirish va db maydonini qo'l yumishiga sozlashi mumkin, so that the handwheel can read and write the data in the DB area of the PLC.

b. Qabul qilgich Siemens S7 Protokolini qo'llab-quvvatlaydi. S7-200 uchun amal qiladi, PLC S7-300 and PLC S7-1200.

t. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

Server rejimida, Foydalanuvchi VGP-tarmoq konfiguratsiyasi dasturi orqali Plc-ni o'qiydi va yozishni yozadi;Qabul qiluvchini mijoz rejimiga sozlash uchun PLC ulanish konfiguratsiyasidan foydalaning. Konfiguratsiyadan keyin, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Maxsus dastur

Qo'l oluvchi va Siemens Plc s7-200-ning o'ziga xos qo'llanilishi:

a. Qo'lda tugmachaning tugmachasi foydalanuvchi tomonidan Plc-da o'rnatilgan Bool maydonining qiymatiga mos keladi. Agar qo'l tomir bosilgan bo'lsa, Tegishli Bool hududi to'g'ri, va u chiqganda, Bu yolg'on, va Book hududining asosiy manzili Qo'lda o'rnatilishi mumkin;

b. Qo'lda DB hududining qiymatini plcdagi qiymatini o'qiy oladi. Bitta eksa bor 4 Displey ma'lumotlarini baytlar, va 6 O'tir kunlari jami 24 bayt. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Tashqi ko'rinishi

5.Qabul qilgich terminalini aniqlash va kodlash jadvali

6.Tashqi ko'rinish hajmi

 

 

]]>