1. Giới thiệu sản phẩm

Handwheel working power supply voltage	DC24V/1A
Receiver power supply voltage	DC24V/1A
Receiver IO output load range	DC24V
Hand wheel end cable length	10m
Receiver end cable length	1m
Receiver end network cable length	3m
Operating temperature	-25℃<X<55℃
Anti-fall height	1m
Custom Button Quantity	6
Product dimensions	233*90.7*77.4（mm）

4.Product function introduction

Ghi chú:

Emergency stop button:

Press the emergency stop button, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.

After releasing the emergency stop, the emergency stop IO output on the receiver is closed, and all functions of the handwheel are restored.

② Screen display:

6.2 Kích thước lắp đặt máy thu

6.3 Installation dimensions of aviation plugs

6.4 Sơ đồ tham khảo nối dây máy thu
7.Product Operation Instructions

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.

5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.

6. Select magnification: Switch the magnification switch and select the magnification level you need.

7. Moving axis: Press and hold the enable button, select the axis selection switch, select the magnification switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.

8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.

9. Press the emergency stop button, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled, release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.

8.Product Model Description

9.Product trouble shooting

1.Giới thiệu sản phẩm

2. Tính năng chức năng của sản phẩm

3. Thông số sản phẩm

Operating voltage and current of wireless remote	3V/14MA
Battery specifications	2 AA alkaline batteries, size 5
Low voltage alarm range of wireless remote	< 2.3V
Receiver power supply voltage	DC5V-24V/A
Receiver emergency stop output load range	AC125V-1A/DC30V-2A
Receiver enable output load range	AC125V-1A/DC30V-2A
Receiver custom button output load range	DC24V/50mA
Receiver axis selection output load range	DC24V/50mA
Receiver magnification output load range	DC24V/50mA
Transmission power of handheld terminal	15dBm
Receiver receiving sensitivity	-100dBm
Wireless communication frequency	433MHz frequency band
Wireless communication distance	Barrier free distance of 40 mét
Operation temperature	-25℃ < X < 55℃
Anti fall height	1 (mét)
Custom button quantity	2

4. Giới thiệu chức năng sản phẩm

Ghi chú:

① Pulse encoder:
Press and hold the enable button, shake the pulse encoder, emit a pulse signal,and control the movement ofthe machine axis.
② Enable button:
Press either enable button on either side, and the two sets of enable IO outputs on the receiver will conduct. Release the enable button to disconnect the enable IO output; And before switching the axis selection magnification and shaking the handwheel,the enable button needs to be held down to be effective; This function can be cancelled through configuration software.

③ Indicator lights:
Left side light: power on light,the handwheel uses the axis to select OFF for power on, and this light stays on after power on;
Middle light: a signal light that lights up when operating any function ofthe handwheel, and does not light up when there is no operation;
Right side light: Low voltage alarm light, low battery level,this lightflashes or stays on, battery needs to be replaced.

④ Emergency stop button:
Press the emergency stop button, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.

⑤ Magnification switch:
Press and hold the enable button to switch the magnification switch, which can switch the magnification controlled by the handwheel.

⑥ Axis selection switch (power switch):
Press and hold the enable button to switch the axis selection switch, which can switch the movement axis controlled by the handwheel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Custom button:
Two custom buttons, each corresponding to an IO output point on the receiver.

5. Sơ đồ phụ kiện sản phẩm

6. Hướng dẫn cài đặt sản phẩm
6.1 Các bước lắp đặt sản phẩm

1. Lắp đầu thu vào tủ điện thông qua khóa cài phía sau, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Tham khảo sơ đồ nối dây máy thu của chúng tôi và so sánh nó với thiết bị tại chỗ của bạn. Connect the equipment to the receiver via cables.
3.After the receiver is properly fixed, the antenna equipped with the receiver must be connected, and the outer end of the antenna should be installed or placed outside the electrical cabinet. Nên đặt nó trên nóc tủ điện để có hiệu ứng tín hiệu tốt nhất. It is prohibited to leave the antenna unconnected or place it inside the electrical cabinet, as this may result in the signal being unusable.
4. Cuối cùng, turn on the power switch of the handwheel, and you can operate the machine remotely using the handwheel.

6.2 Kích thước lắp đặt máy thu

6.3 Sơ đồ tham khảo nối dây máy thu

7. Hướng dẫn vận hành sản phẩm
1. Power on the machine and the receiver. The receiver’s working indicator light flashes. Install the battery in the wireless electronic handwheel, secure the battery cover, Và
turn on the power switch of the wireless electronic handwheel. The handwheel’s battery level indicator light is on.
2. Select the coordinate axis: Press and hold the enable button, toggle the axis selection switch, and select the axis you want to operate.
3. Select magnification: Press and hold the enable button, toggle the magnification switch,and select the desired magnification level.
4. Moving axis: Press and hold the enable button, select the axis selection switch, select the magnification switch, and then rotate the pulse encoder. Rotate clockwise to move the
positive axis and counterclockwise to move the negative axis.
5. Press and hold any custom button, and the corresponding button IO output of the receiver will be turned on. Release the button, and the output will be turned off.
6. Press the emergency stop button, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled,release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
7. If the handwheel is not operated for a period of time, it will automatically enter sleep mode to reduce power consumption. When it is used again, the handwheel can be activated by pressing the enable button.
8. If the handwheel is not used for a long time, it is recommended to switch the handwheel shaft to the OFF position, turn off the handwheel power, and extend the battery life.

8. Product Model Description

① :ZTWGP represents the appearance style
②：Pulse output parameters:
01: Indicates that the pulse output signal is A, B; Pulse voltage 5V; pulse quantity 100PPR.
02：Indicating thatthe pulse output signals are A and B; Pulse voltage 12V; pulse quantity 100PPR.
03：Indicating thatthe pulse output signals are A, B, A -, B -; Pulse voltage 5V; pulse quantity 100PPR.
04：Indicates a low-level NPN open circuit output, with pulse output signals of A and B;The number of pulses is 100PPR.
05：Indicates high-level PNP source output, with pulse output signals of A and B; The number of pulses is 100PPR.
③：Representing the number of axis selection switches, 2 represents 2 axes.
④：Represents the type of axis selection switch signal, A represents point-to-point output signal, and B represents encoded output signal.
⑤：Represents the type of multiplication switch signal, A represents point-to-point output signal, and B represents encoded output signal.
⑥：Represents the number of custom buttons, 2 represents 2 custom buttons.
⑦：Represents the power supply for the system handwheel, Và 05 represents 5V power supply.
⑧：L represents the left column (left knife holder), and R represents the right column (right knife holder).

9.Solution to Product Malfunctions

1.Giới thiệu sản phẩm

Wireless electronic handwheel is used for manual guidance, positioning, tool alignment,and other operations on CNC machine tools. This product adopts wireless transmission technology, eliminating the traditional spring wire connection, reducing equipment failures caused by cables, eliminating the disadvantages of cable dragging and oil stains, and making operation more convenient. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,phóng đại, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Tính năng sản phẩm
1. Áp dụng công nghệ truyền thông không dây 433MHZ, khoảng cách hoạt động không dây là 40 mét;
2. Adopt automatic frequency hopping function, use 32 sets of wireless remote controllers at the same time without affecting each other;
3. Hỗ trợ nút dừng khẩn cấp, chuyển đổi đầu ra tín hiệu IO, connected to the system through IO wiring;
4. Ủng hộ 4 nút tùy chỉnh, chuyển đổi tín hiệu IO, Tín hiệu đầu ra hệ thống thông qua giao thức IO-LINK;
5. Hỗ trợ nút di chuyển nhanh + và nút -, nhấn và giữ nút thay tay quay để di chuyển máy;
6. Hỗ trợ điều khiển 6 trục, chuyển đổi tín hiệu IO, Tín hiệu đầu ra hệ thống thông qua giao thức IO-LINK;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Ghi chú:
①Emergency stop button:
Press the emergency stop button, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 nút tùy chỉnh, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Press and hold the enable button and shake the pulse encoder to send out a pulse
signal to control the movement of the machine axis.
⑨Power switch:
Handwheel power button.

5.Sơ đồ phụ kiện sản phẩm

6.Hướng dẫn cài đặt sản phẩm

6.1 Product Installation Steps

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Refer to our receiver wiring diagram, compare it with your on-site equipment, and connect
the equipment to the receiver via cables.
3. After the receiver is fixed, the antenna equipped with the receiver must be connected,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Nên đặt nó trên nóc tủ điện để có hiệu ứng tín hiệu tốt nhất. It
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4.Cuối cùng, turn on the handwheel power switch and you can operate the machine by
handwheel remote control.

6.2 Kích thước lắp đặt máy thu

6.3 Sơ đồ tham khảo nối dây máy thu

7. Maintenance and care

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
the service life;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Please avoid squeezing, falling, bumping, vân vân. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Nếu không sử dụng trong thời gian dài, please store the handwheel in a clean and safe place;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Please read the instructions carefully before use. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Nếu cần sửa chữa, vui lòng liên hệ với nhà sản xuất. If the damage is caused by self-repair,
the manufacturer will not provide warranty.

1.Giới thiệu sản phẩm

Wireless electronic handwheel is used for manual guidance, positioning, tool setting and
other operations of CNC machine tools. This product adopts wireless transmission technology,
eliminating the traditional spring wire connection, reducing equipment failures caused by cables,
eliminating the disadvantages of cable dragging, oil stains, vân vân., and is more convenient to
operate. It is widely used in CNC machine tools such as gantry machining centers, gantry
vertical lathes, CNC gear processing machines, and can be adapted to a variety of CNC
systems on the market, such as Siemens, Mitsubishi, Fanuc, syntec and other CNC system
brands.

2.Tính năng sản phẩm

1. Áp dụng công nghệ truyền thông không dây 433MHZ, khoảng cách hoạt động không dây là 80 mét;
2. Adopt automatic frequency hopping function, use 32 sets of wireless remote controllers at the
same time without affecting each other;
3. Hỗ trợ nút dừng khẩn cấp, and after the handwheel is turned off, the emergency stop
button is still valid;
4. Ủng hộ 6 nút tùy chỉnh, chuyển đổi đầu ra tín hiệu IO;
5. Hỗ trợ điều khiển 6 trục, 7-12 điều khiển trục có thể được tùy chỉnh;
6. Hỗ trợ 1X,10X, 100Điều khiển X và có thể tùy chỉnh tối đa 1000X;
7. Supports the enable button function, output switch l0 sianals. lựa chọn trục,maanification
and encoder.;
8. Support axis selection and magnification selection encoder output;
9. Support standard Type-C charging, 5V-2A charging specification, built-in battery specification
14500/1100mAh.

3.Thông số sản phẩm

4.Product function introduction

Ghi chú：
①Emergency stop button：
Khi nhấn nút dừng khẩn cấp, the two emergency stop IO outputs on
the receiver are disconnected, and all handwheel functions are invalid. When the emergency
stop is released, the emergency stop IO output on the receiver is closed, and all handwheel
functions are restored; and after the handwheel is turned off, the emergency stop IO output
of the receiver is still valid when the emergency stop button is pressed.

②Enable button:
Press any one of the enable buttons on both sides, and the two groups of enable IO
outputs on the receiver will be turned on. Release the enable button and the enable IO
output will be turned off. In addition, you need to press and hold the enable button before
switching the axis selection ratio and shaking the handwheel. This function can be
canceled through the configuration software.
③Axis selection switch (power switch):
Press and hold the enable button and switch the axis selection switch to switch the
moving axis controlled by the handwheel. Switch this switch from OFF to any axis and
turn on the handwheel power.

④Pulse encoder:
Press and hold the enable button and shake the pulse encoder to send out a pulse
signal to control the movement of the machine axis.

⑤Battery indicator:
The hand wheel power display, all bright means full power, all off means it is not
turned on or has no power, the first left grid flashes, indicating that the power is too low,
please charge in time.
⑥Signal Lights:
If the signal light is on, it means the handwheel is being operated and the signal is
normal; if the signal light is off, it means there is no operation, or it is being operated but
the wireless signal is not connected.

5.Sơ đồ phụ kiện sản phẩm

6.Hướng dẫn cài đặt sản phẩm

6.1 Product Installation Steps
1. Install the receiver in the electrical cabinet using the clips on the back, or install it in
the electrical cabinet using the screw holes at the four corners of the receiver.
2.Refer to our receiver wiring diagram, compare it with your on-site equipment, and connect
the equipment to the receiver via cables.
3.After the receiver is fixed, the antenna equipped with the receiver must be connected,
and the outer end of the antenna must be installed or placed outside the electrical cabinet. It
is recommended to place it on the top of the electrical cabinet for the best signal effect. It is
forbidden to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4. Cuối cùng, turn on the handwheel power switch and you can operate the machine by
handwheel remote control.

6.2 Kích thước lắp đặt máy thu

6.3 Sơ đồ tham khảo nối dây máy thu

7.Product Operation Instructions
1. The machine is powered on, the receiver is powered on, the receiver working indicator
light flashes, the wireless electronic handwheel has the battery installed, the battery cover
is fastened, the wireless electronic handwheel power switch is turned on, and the
handwheel power light is on;
2. Select the coordinate axis: Press and hold the enable button, switch the axis selection
công tắc, and select the axis you want to operate on;
3. Select magnification: Press and hold the enable button, switch the magnification switch,
and select the magnification level you need;
4. Moving axis: Press and hold the enable button, select the axis selection switch, lựa chọn
the magnification switch, and then rotatethe pulse encoder to rotate the positive moving axis
clockwise and the negative moving axis counterclockwise;
5. Press and hold any custom button, and the corresponding button IO output of the
receiver will be turned on. Release the button to turn off the output;
6. Press the emergency stop button, the corresponding emergency stop IO output of the
receiver is disconnected, the handwheel function is disabled, release the emergency stop
button, the emergency stop IO output is closed, and the handwheel function is restored;
7. If the handwheel is not operated for a period of time, it will automatically enter sleep
mode to reduce power consumption. When it is used again, the handwheel can be
activated by pressing the enable button;
8. If the handwheel is not used for a long time,it is recommended to switch the handwheel
shaft to the OFF position, turn off the handwheel power, and extend the battery life.

8.Product Model Description

① ：DWGP represents the appearance style

② ：Pulse output parameters:
01: Indicates that the pulse output signals are A and B, and the pulse voltage is 5V; Pulse
quantity 100PPR;
02: Indicates that the pulse output signals are A and B, and the pulse voltage is 12V; Pulse
quantity 25PPR;
03: Indicates that the pulse output signal is A B、A-、B-； Pulse voltage 5V; Pulse quantity 1
00PPR;
04: Indicates a low-level NPN open circuit output, with pulse output signals of A and B; cái
number of pulses is 100PPR;05: Indicates high-level PNP source output, pulse output signals
are A and B; pulse quantity is 100PPR;
③ : represents the number of axis selection switches, 6 represents 6 trục, 7 represents 7 axis.
④ : represents the type of axis selection switch signal, A represents point-to-point output signal,
B represents encoded output signal;

⑤ : represents the type of magnification switch signal,
A represents point-to-point output signal, B represents encoded output signal;
⑥ : represents the number of custom buttons, 6 represents 6 nút tùy chỉnh;
⑦ : represents the power supply for the system handwheel, 05 represents 5V power supply,
Và 24 represents 24V power supply.

9.Product Troubleshooting

10. Maintenance and care

1. Vui lòng sử dụng nó trong môi trường khô ráo ở nhiệt độ và áp suất phòng để kéo dài tuổi thọ của nó;
2. Vui lòng tránh sử dụng trong môi trường bất thường như mưa và bong bóng nước để kéo dài tuổi thọ;
3. Please keep the appearance of the handwheel clean to extend its service life;
4. Please avoid squeezing, falling, bumping, vân vân. to prevent damage to the precision components inside
the handwheel or accuracy errors;
5. Nếu không sử dụng trong thời gian dài, please store the handwheel in a clean and safe place;
6.Trong quá trình bảo quản và vận chuyển, attention should be paid to moisture and shock resistance.

11.Thông tin an toàn

1. Vui lòng đọc kỹ hướng dẫn trước khi sử dụng và cấm những người không chuyên nghiệp vận hành;
2. When the battery level is too low, please charge it in time to avoid errors caused by insufficient
battery and inability to operate the handwheel;

3. Nếu cần sửa chữa, vui lòng liên hệ với nhà sản xuất. Nếu hư hỏng do tự sửa chữa, the manufacturer will not provide warranty.

Người mẫu：ATWGP-12

Adaptation system: all CNC systems with handwheel interface

This product is a manual pulse generator used with CNC machine tools. It has beenwidely used in fields such as CNC machine tools, máy tiện CNC, machining centers,CNC engraving and milling machines. This product uses wireless transmissiontechnology, eliminating the need for traditional spring wire connections, reducingequipment failures caused by cables, eliminating cable drag, oil and other contamination, and making operation more convenient. The product package includes the receiver and wireless electronic handwheel. The receiver is connected to the CNC equipment through a network cable, and the electronic handwheel (hand pulse generator) is connected and communicated with the receiver through wireless transmission technology. The operator holds the handwheel and can get rid of the connection constraints of the spring wire and move freely. For large-scale gantry milling, máy tiện CNC, traveling machine tools, cắt và các ứng dụng khác, it brings great convenience and improves work efficiency.

Supports various system brands such as Siemens, Mitsubishi, Fanuc, TaiwanXindai, Baoyuan, Fagor, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Using the 433MHZ wireless communication frequency band, the wireless operating distance is 40 mét;
2. Áp dụng chức năng nhảy tần tự động và sử dụng 32 sets of wireless handwheels at the same time without affecting each other;
3. Supports emergency stop button and 3 custom button switch outputs;
4. Supports multiple axis selections of 6-axis, 7-trục, 8-trục, 9-trục, 10-axis and 12-axis, with 3-speed and 4-speed magnification.Axis selection and magnification switches support various signal types such as binary coding, point-to-point, gray code, vân vân.;
5. Supports 5V differential pulse signal, 24V pulse signal and other pulse signal types;
6. Thiết kế tiêu thụ năng lượng thấp, 2 AA batteries can be used for more than 1 month;
7. Supports external extension antenna, suitable for various machine tool installation environments, ensuring signal stability;

Ghi chú:
1. Status indicator light:
Signal light (left): The signal light is always on when the handwheelis operated, and does not light up when not operating;
Low voltage alarm light (right): When the battery power is too low,the alarm light flashes or stays on;
2. Enable button:
After pressing and holding the enable button, the axis selection and magnification signals are activated, and the pulse encoder output is valid;
3. Custom button:
A button without any function can control a corresponding switch output on the receiver;

COM1: Common terminal for axis selection magnification signal output; can be connected to 0-24V public signal
COM2: Common terminal of 3 custom button outputs;

*Axis selection and magnification can be selected through software, coding or point-to-point, please consult the staff for details

The final interpretation right of this product belongs to our company.

1.Giới thiệu điều khiển từ xa

a.Sản phẩm Comtư thếý kiến
Tay quay điện tử không dây hiển thị tọa độ thời gian thực của Siemens bao gồm hai phần: tay quay điện tử + người nhận;

b.Đặc điểm

*6 nút tùy chỉnh có thể kiểm soát 6 chuyển đổi đầu ra;
*Màn hình hiển thị hiển thị giá trị tọa độ thanh ghi tương ứng của PLC theo thời gian thực, and supports 6-axis display of real-time coordinates.

2.Trường ứng dụng

1)Tay quay điện tử được kết nối với PLC thông qua bộ thu Ethernet

a.Tay quay truyền dữ liệu quan trọng không dây đến máy thu, và người nhận ghi khóa thông qua cáp mạng Hệ thống PLC Khu vực DB; người nhận đọc dữ liệu được hiển thị từ vùng DB được chỉ định, rồi trả dữ liệu về màn hình hiển thị tay quay. Người dùng có thể tùy chỉnh địa chỉ cơ sở của vùng đọc và ghi DB trên tay quay, so that the handwheel can read and write the data in the DB area of the PLC.

b. Bộ thu hỗ trợ giao thức Siemens S7. Áp dụng cho PLC S7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

Ở chế độ máy chủ, người dùng cấu hình địa chỉ đọc và ghi PLC thông qua phần mềm cấu hình WGP-ETS;Sử dụng công cụ cấu hình kết nối PLC để định cấu hình bộ thu ở chế độ máy khách. Sau khi cấu hình, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Ứng dụng cụ thể

Ứng dụng cụ thể của bộ thu tay quay và PLC PLC S7-200 của Siemens:

Một. Nút bấm trên tay quay tương ứng với giá trị vùng BOOL do người dùng cài đặt trong PLC. Nếu nhấn nút trên tay quay, vùng BOOL tương ứng là đúng, và khi nó được phát hành, nó là sai, và địa chỉ cơ sở của vùng BOOL có thể được đặt thông qua tay quay;

b. Tay quay có thể đọc giá trị vùng DB trong PLC. Một trục có 4 byte dữ liệu hiển thị, Và 6 các trục có tổng cộng 24 byte. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Giới thiệu ngoại hình

5.Bảng mã hóa và định nghĩa thiết bị đầu cuối máy thu

6.Kích thước ngoại hình

Adaptation system: all CNC systems with handwheel interface

This product is a manual pulse generator used with CNC machine tools. It has beenwidely used in fields such as CNC machine tools, máy tiện CNC, machining centers,CNC engraving and milling machines. This product uses wireless transmissiontechnology, eliminating the need for traditional spring wire connections, reducingequipment failures caused by cables, eliminating cable drag, oil and other contamination, and making operation more convenient. The product package includes the receiver and wireless electronic handwheel. The receiver is connected to the CNC equipment through a network cable, and the electronic handwheel (hand pulse generator) is connected and communicated with the receiver through wireless transmission technology. The operator holds the handwheel and can get rid of the connection constraints of the spring wire and move freely. For large-scale gantry milling, máy tiện CNC, traveling machine tools, cắt và các ứng dụng khác, it brings great convenience and improves work efficiency.

Supports various system brands such as Siemens, Mitsubishi, Fanuc, TaiwanXindai, Baoyuan, Fagor, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Using the 433MHZ wireless communication frequency band, the wireless operating distance is 40 mét;
2. Áp dụng chức năng nhảy tần tự động và sử dụng 32 sets of wireless handwheels at the same time without affecting each other;
3. Supports emergency stop button and 3 custom button switch outputs;
4. Supports multiple axis selections of 6-axis, 7-trục, 8-trục, 9-trục, 10-axis and 12-axis, with 3-speed and 4-speed magnification.Axis selection and magnification switches support various signal types such as binary coding, point-to-point, gray code, vân vân.;
5. Supports 5V differential pulse signal, 24V pulse signal and other pulse signal types;
6. Thiết kế tiêu thụ năng lượng thấp, 2 AA batteries can be used for more than 1 month;
7. Supports external extension antenna, suitable for various machine tool installation environments, ensuring signal stability;

Ghi chú:
1. Status indicator light:
Signal light (left): The signal light is always on when the handwheelis operated, and does not light up when not operating;
Low voltage alarm light (right): When the battery power is too low,the alarm light flashes or stays on;
2. Enable button:
After pressing and holding the enable button, the axis selection and magnification signals are activated, and the pulse encoder output is valid;
3. Custom button:
A button without any function can control a corresponding switch output on the receiver;

COM1: Common terminal for axis selection magnification signal output; can be connected to 0-24V public signal
COM2: Common terminal of 3 custom button outputs;

*Axis selection and magnification can be selected through software, coding or point-to-point, please consult the staff for details

The final interpretation right of this product belongs to our company.