1. 12 nút, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
Điều khiển từ xa không dây để cắt laser năm trục 3D：PHB06B-LASER
Sự miêu tả
1.Giới thiệu sản phẩm
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, hỗ trợ 12 nút, and supports real-time display of system coordinates and status.
2.Tính năng sản phẩm
1. 12 nút, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5Thông số sạc V-2A, built-in battery specifications 18650/12775mWh.
3.Nguyên tắc làm việc
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
Ghi chú: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.Thông số sản phẩm
| Điện áp nguồn máy thu | DC5V-DC24V |
| Button lifespan | 1,000,000 lần |
| Operating Temperature |
-25oC < X < 55oC
|
| Safe drop height | 1 m |
| Receiver port | Ethernet |
| Number of buttons |
12
|
| Màn hình hiển thị |
2.8-inch color screen
|
| wireless communication frequency | 433MHz band |
| Receiver sensitivity |
-100dBm
|
| Handheld transmit power |
15dBm
|
| Khoảng cách liên lạc không dây | 100 meters barrier-free range |
| Rechargeable Battery Specification | Rechargeable Battery Specification |
| Charging base power supply voltage | DC24V/1A |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.Giới thiệu chức năng sản phẩm
Ghi chú:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 nút
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 xung trên mỗi vòng quay.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
9. Test Instructions
10. Installation dimensions
Kích thước lắp đặt máy thu
Unit: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. Vui lòng sử dụng nó trong môi trường khô ráo ở nhiệt độ và áp suất phòng để kéo dài tuổi thọ của nó.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, vân vân. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.Thông tin an toàn
1. Vui lòng đọc kỹ hướng dẫn trước khi sử dụng và cấm những người không chuyên nghiệp vận hành.
2. If you repair it yourself and cause damage, the warranty will be void.
