2. Iimpawu zeMveliso
1. Itekhnoloji yoNxibelelwano lwe-433mhz, umgama wokusebenza ngaphandle kwentambo 100 meters.
2. Ukwamkela ukusebenza ngokuzenzekelayo, sebenzisa 32 Iiseti zolawulo olude olungenazingcingo ngaxeshanye, without affecting each other.
3. Xhasa onke amantshontsho ane-485-Modbus RTU Protocol. Iimpawu ze-inverter eziye zalungelelaniswa zibandakanya:Shanghai xilin, Fuji, Ubuchule, Zhongchen, I-mesht, Ankuanda. If the brand is not ada please contact us for customization.
4. Xhasa ukuqala kwe-neverter enkulu, Ummiselo wesantya, and current reading.
5. Inkxaso yasekhohlo kunye ne-ARMRR ye-APRERY MADRENT, qala, front and back left and right control.
6. Support left and right crawler inverter straight line correction to keep the machine moving in a straight line.
7. I-prope yenkxaso yafumana umsebenzi wokusika ngokuzenzekelayo, automatically adjust the left and right crawler speed in real time according to the large motor current information.
8. Ngaxeshanye, Ihambelana nemveliso ethe ngqo ukulawula ukuqala kunye nokuma kwemoto, and analog voltage output to control the motor speed.

3. Imveliso yemveliso

4. Umsebenzi wemveliso

Amanqaku:
I-①screen bonisa:

Ukutshintsha kwe-②mode:
Sebenzisa i-2--switch witch, Kuyenzeka ukuba utshintshe phakathi kweendlela ezizenzekelayo kunye nezandla, and the corresponding mode will be displayed on the screen for switching.
③ Yenza:
Amaqhosha okudibanisa, Umsebenzi othile ufune ukubamba ezantsi kwiqhosha lokusebenza, please refer to the instructions for each switch for details.
④ Ukutshintsha kwemoto enkulu:
Sebenzisa isantya sesantya esi-3, Ukudonsa le tshintsho kunokulawula phambili kunye nokujikeleza kwemoto enkulu. Emva kokukhulula, URhulumente uya kuhlala, kwaye kuya kubakho imiboniso ehambelana nesikrini. I-T Arrow ibonisa ukujikeleza phambili, and the y arrow indicates reverse rotation.
I-⑤small motor / i-reverset yokutshintsha:
Sebenzisa isantya esi-3 sokuvalela, Ukutsala le tshintsho kunokulawula imoto encinci ukuya phambili kwaye ngasemva. Umboniso ohambelana naye uya kubonisa kwiscreen, with the t arrow indicating forward and the ↓ arrow indicating backward.
I-Switch yolawulo lwamandla e-⑥remote:
The remote control display screen is turned on.
⑦ I-switch encinci yokutshintsha:
Sebenzisa isantya sesantya esi-3, Xa isebenza ngesandla, Imoto encinci inokulawulwa ukujika ngasekhohlo okanye ngasekunene. Kanye, Ulawulo olukude luya kumisa ngokuzenzekelayo le ntshukumo., Guqula le switch kwaye umboniso ohambelana naye uya kuvela kwiscreen.I + Utolo lubonisa ithuba lasekhohlo, kwaye i – Utolo lubonisa ithuba elifanelekileyo, Guqula le switch kwaye umboniso ohambelana naye uya kuvela kwiscreen.I + Utolo lubonisa ithuba lasekhohlo, kwaye i – Utolo lubonisa ukujika kwelungelo lasekunene.Press kwaye ubambe iqhosha lemisebenzi, Emva koko jika le tshintsho ukuze wenze umsebenzi wokujika, making the turn faster.
Umgaqo omkhulu wesantya semoto enkulu:
Sebenzisa i-Multi jika i-theb, Jikelezisa i-knob ukuze uhlengahlengise isantya se-s1 yemoto enkulu kuyo yonke into 1 Ukujikeleza kwegridi, Ixabiso lesantya sotshintsho lwemoto enkulu malunga 0.2 iiyunithi, and rapid rotation can quickly modify the speed value of the large motor.
9 Ummiselo wesantya esincinci (Ukulungiswa komgca):Ukusebenzisa i-Multi jika i-knob, kwimowudi yencwadi, kuyo yonke 1 Guqula i-knob, Ixabiso lesantya sotshintsho lwemoto encinci malunga 0.1 iiyunithi. Fast rotation can quickly modify the speed value of the small motor.
Kwindlela ezenzekelayo, Cinezela iqhosha le-ECONA kwaye ujikeleze 1 Igridi ixesha ngalinye. Ixabiso lomda wesantya se-f yotshintsho lwemoto encinci malunga 0.1 iiyunithi. Ukujikeleza ngokukhawuleza kunokutshintsha ngokukhawuleza ixabiso lesantya sesantya sezigidi zeenqwelo-mafutha., jika iqhina ngasekunene, kunye nomgca wokulungisa umgca othe nkqo bonisa u-D F: khohlo. Ukujikeleza nganye kwe-knob yonyusa 1 iyunithi; Jika ngasekhohlo, Umboniso ngqo ngqo: Df: kunene. Ukujikeleza nganye kwe-knob yonyusa 1 iyunithi, kwaye iyunithi yokulungisa nganye ihambelana nolawulo lwesantya semithuthi Avi 0.02 V.

5. Umzobo wemveliso yemveliso

6. Isikhokelo semveliso
6.1 Amanyathelo ofakelo lwemveliso
1. Faka umamkeli kwiKhabhinethi yombane ngokusebenzisa i-buckle ngasemva, or install it in the electrical cabinet through the screw holes at the four corners of the receiver.
2. Jonga umzobo wethu we-wiring, Thelekisa izixhobo zakho zesiza, and connect the equipment to the receiver through wires.
3. Emva kokuba umntu omkelweyo, I-eriyali exhotywe ngumsebenzi kufuneka iqhagamshelwe, Kwaye isiphelo sangaphandle se-eriyali kufuneka sifakwe okanye sibekwe ngaphandle kweKhabhinethi yoMbane. Kucetyiswa ukuba uyibeke eqongeni kwiKhabhinethi yoMbane yeyona nto ibalulekileyo. Inqatshelwe ukuba ishiye i-eriyali engapheliyo okanye ibeka i-eriyali ngaphakathi kwiKhabhinethi yombane, which may cause poor signal and unusable.
4. Ekugqibeleni, faka ibhetri kulawulo olukude, qinisa isigqubuthelo sebhetri, kwaye emva koko vula i-switch yolawulo olude. Emva kophawu lolawulo oluphezulu lubonisa i-intercal eqhelekileyo yokusebenza, you can perform remote control operation.

6.2 Ubungakanani bofakelo lokufaka

6.3 Umzobo wereferensi ye-Wiring Wiring

7. Imiyalelo yeMveliso yeMveliso
7.1 Useto lweParameter ekude
Ungangenisa njani iiparamitha ezingasemva komlawuli okude: jika i-POOD kwimowudi yencwadana yemisebenzi, lungisa isantya semoto encinci 25, okanye 0, 10, 20, 40, 50, kwaye jika phambili itshintshiwe kwi-motor enkulu ngaphezulu 3 amaxesha kunye nehla 3 amaxesha;
Sebenzisa i “Ulawulo lwesantya esincinci” I-knob ukuguqula iphepha, Cinezela Yenza i-CORCH yesantya semoto encinci yokutshintsha ukuguqula iiparamitha; Emva kokulungiswa, jika iphepha ukuya esiphelweni, Khetha Gcina kwaye uphume, kwaye cinezela iqhosha lokwenza ukuba uphume kwimenyu;

Iiparameter zilandelayo:Ubuninzi bobuninzi: Uluhlu olukhulu lwexabiso lokuphendula, Ukuseta uluhlu lwe-15-200A, Ukungagqibeki 60;

I-parameter yesantya: Imowudi yokuzenzekelayo yeMoti ye-Acciec Moreration, incinci ngokukhawuleza, Ukuseta uluhlu 200-1500, Ukungagqibeki 1000;

Iparamera yenkohliso: Setha umda ophezulu wotshintsho lwesantya semoto evunyelwe. Xa utshintsho lwangoku lwangoku lungaphaya kweXabiso, Iya kuphelela. Incinci, I-Motors yasekhohlo nezomileyo ziya kuphelela. Uluhlu lukhona 05-12, kwaye okungagqibekanga 06;

Ukukhawulezisa i-A1: Ixabiso elikhulu, ngokukhawuleza kwesantya semoto, Uluhlu 00-06, emide 01; Inkohliso A2: Ixabiso elikhulu, ngokukhawuleza isantya semoto sehla, Uluhlu 00-06, Ukungagqibeki 02;

Yenza ummiselo wesantya: Ingaba ummiselo omncinci wesantya kufuneka asebenze, 00 ayinakwenziwa, 01 yenziwe, Ukungagqibeki 01;

Qalisa ngokwakho: Ingaba inqwelo enkulu iya kuhlala iguqulwe ngokuzenzekelayo emva kokuqhubela phambili kwaye ikhutshiwe umva, 00 ayigcinwanga, 01 igcinwa, Ukungagqibeki 01;

Uhambo oluninzi: Isantya esiphezulu seMotors esekhohlo nelungileyo, Uluhlu 10-100, Ukungagqibeki 50;

Ukusika okwangoku: Iphezulu yokusika okwangoku, Isikrini sibonisa ixabiso le-IC, Uluhlu 15-160, Ukungagqibeki 30, Isikrini sibonisa i-IC: 30. Umda ophezulu wale paramitha = ubuninzi be-x 80%;

Umda wesantya esingagqibekanga: Isantya esingagqibekanga semoto esizenzekelayo esizenzekelayo kwisiqalo, Uluhlu 00-100, Ukungagqibeki 10, Isikrini sibonisa i-F1.0, this parameter is only accurate when the maximum travel is set to 50.

Ijelo elingenazingcingo: Ukungagqibeki 10. Xa uphawu lolawulo olukude alunakuzinza okanye kukho ukuphazamiseka komqondiso kwisayithi, Ungayiguqula le parameter ukutshintshela iitshaneli ukuphepha ukuphazamiseka;

Isantya sokunciphisa umda: Umda ophezulu wesantya esizenzekelayo sokusika kwemoto encinci,Uluhlu 00-200, Ukungagqibeki 60, Isikrini somboniso 6.0; Ixabiso lokubonisa umda ongaphezulu 0.1;

Owona mgcini: Isantya esiphezulu semoto enkulu, Uluhlu 10-100, Ukungagqibeki 50;

Isixhobo se-MBUS ( isinyanzelo ): Ukukhetha imodeli enkulu engaphakathi, Uluhlu 00-03, Ukungagqibeki 03;

00- Shanghai xilin 01 Fuji
02- I-mesht 03 InOvance (Zhongchen, Umpu)

Izixhobo ze-SBUS (isinyanzelo): Imodeli encinci yeModeli yeModeli, Uluhlu 00-05, Ukungagqibeki 03;
00- Shanghai xilin 01 Fuji
02- I-mesht 03 InOvance (Zhongchen, Umpu)
04-I-Anchuanda 05 -Akho

8. Impembelelo kwiNgqondo

7.2 Ukusetwa kweparamitha ye-frequency classment
1. Ukhetho lomthombo woMyalelo: Umyalelo woNxibelelwano
2. Eyona nto iphambili ekuchongeni: Unxibelelwano olunikezwe
3. Ixabiso le-baud: 19200
4. Ifomati yedatha: Akukho siqinisekiso, Ifomati yedatha<8-N-1>
5. Idilesi yendawo: Cwangcisa i-frequency yasekhohlo ukuya 1, Umguquleli ofanelekileyo wokuhamba 2, and the large motor frequency converter to 3

7.3 Imiyalelo yokulawula kude
1. Amandla kumatshini, Vula ulawulo olukude, Ngenisa imvelaphi yolawulo olukude, Cwangcisa iiparamitha ezikude zolawulo, ubukhulu becala kukuseta iimodeli zabaguquli abancinci nabakhulu (Tsibela eli nyathelo ukuba umvelisi womatshini sele ebeke);
2. Misela iiparamitha zomguqulo wexesha lokuguqula (Tsibela eli nyathelo ukuba umenzi womatshini sele eyibeke);
3. Misela ulawulo olukude kwimodi yencwadana, emva koko sebenzisa ulawulo olude ukuhambisa umatshini kwindawo yokusebenza;
4. Kwimowudi yencwadi, Cwangcisa ixabiso le-IC lokusika okwangoku kwimoto enkulu kunye nesantya semoto enkulu;
5. Tshintshela kwimowudi yenzekelayo kwaye usete umda wesantya esisikiweyo;
6. Kwindlela ezenzekelayo, jika utshintsho olukhulu lwemoto ukuya phambili ukuqala imoto enkulu, kwaye emva koko jika utshintsho oluncinci lwemoto ukuya phambili okanye umva. The remote control enters automatic cutting mode and begins cutting.

9.Isondlo
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Ukuba ayisetyenziswanga ixesha elide, please remove the battery and store the remote control and battery in a clean and safe place.
6.Ngexesha lokugcina kunye nokuhamba, attention should be paid to moisture and shock resistance.

10. Ulwazi ngoKhuseleko
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Nceda ubeke ibhetri ngexesha elifanelekileyo xa ibhetri iphantsi kakhulu ukuba iphephe iimpazamo ezibangelwa ngamandla angonelanga, which may result in the remote control being unable to operate.
3. Ukuba ukulungiswa kuyafuneka, Nceda unxibelelane noMvelisi. Ukuba umonakalo ubangelwa kukuzilungisa, Umenzi akazukubonelela ngewaranti

Ulawulo olukude lokusika ngokuzenzekelayo lwe-trape yemoto ilungele uhlobo lohlobo lomkhondo
oomatshini bokusika. Isebenzisa 485 IProtokholi yeModbus ilawula i-frequency ye-Ekhohlo
abaguquli, kunye nolawulo lweMoto lwemoto enkulu yokuqalisa kunye nomphambili, ngasemva,
Abalawuli basekhohlo nabasekunene. Kwaye inokufunda ngokusebenza kwemoto enkulu
Iguquguquke i 485 Iprotocol RTU. Ngokuhlalutya kunye nokuthelekisa okwangoku
Imoto enkulu, isantya sendlela yasekhohlo nasekunene inokulungiswa ngokuzenzekelayo ngexesha lokwenyani
achieve automatic cutting function.

2. Imveliso yeMveliso

1. Ukwamkela itekhnoloji yoNxibelelwano nge-433mhz, ngomgama osebenza ngaphandle kwentambo 100 meters.
2. Ukwamkela umsebenzi oqhubekayo ngokuzenzekelayo kunye nokusetyenziswa 32 Iiseti zabalawuli abaziingcingo ezikude
ngaxeshanye, without affecting each other.
3. Ixhasa bonke abaguquli rhoqo abaguquli 485 Iprotocol RTU, kwaye okwangoku
Iimpawu zokuguqula zibandakanya:Shanghai xilin, Fuji, Huictuan, Zhongchen, I-mesht, kwaye . I-Brands
ayihambelani, please contact us for customization.
4. Ummiselo wesantya, ukuqala, and current reading of large motor frequency converters.
5. Inkxaso yasekhohlo neyokulandelelana, ukuqala, ngaphambili, umva, left and right control.
6. Ukulungiswa kwenkxaso kwi-Ekhohlo nelungelo lokuguqulela rhoqo oomatshini wokugcina umatshini uhamba kwi
straight line.
7. Xhasa umsebenzi wokusika ngokuzenzekelayo wentambo, lungisa ngokuzenzekelayo isantya sasekhohlo kunye nekunene
real time according to the current information of the large motor.
8. Ikwahambelana nolawulo lwe-IO ngokuthe ngqo kwi-IO motor Start kwaye uyeke, kunye ne-anaild yevolthi
control for motor speed.

3. Imveliso yemveliso

4. Umsebenzi wemveliso

Amanqaku:
I-①screen bonisa:

Ukutshintsha kwe-②mode:

Uqoqosho:
Amaqhosha okudibanisa, Umsebenzi othile ufune ukubamba ezantsi kwiqhosha lokusebenza,see the instructions for each switch for details.
Ukutshintsha kwemoto:
Sebenzisa isantya sesantya esi-3, Ukudonsa le tshintsho kunokulawula phambili kunye nokujikeleza kwemoto enkulu. Emva kokukhulula, URhulumente uya kuhlala, kwaye kuya kubakho imiboniso ehambelana nesikrini. I-S1 ↑ Arrow ibonisa ukujikeleza phambili, and the S1 ↓ arrow indicates everse rotation.
I-⑤small motor / i-reverset yokutshintsha:
Imoto encinci ixhotywe nge-3-freed yokutshintsha i-switch phambi kwayo. Ukucinezela iqhosha lokwenza ukuba ukutshintshwa kunokulawula imoto encinci ukuya phambili kunye nokubuyela umva, kwaye umboniso ohambelanayo uya kuvela kwiscreen.I-↑↑ utolo lumela phambili, and the ↓↓ arrow represents backward.
⑥ Ukulungiswa komgca ngqo ngqo:
Sebenzisa i-Multi jika i-theb, Cinezela iqhosha le-ECONA, jika i-knob, kwaye ubonise ulungiso lomgca othe ngqo: Df: I-theb ekhohlo inyuka 1 iyunithi nganye yokujikeleza, kwaye ngasekhohlo
isantya semoto inyuka nge 0.1 iyunithi; Jika ngasekhohlo, Umboniso ngqo ngqo: Df: Ngasekunene, lonke ixesha lokunyuka kweqhina 1 iyunithi, kunye nesantya semoto efanelekileyo
ngu 0.1 unit.
⑦small pic ufumana i-switch:
Sebenzisa isantya sesantya esi-3, Xa isebenza ngesandla, Imoto encinci inokulawulwa ukujika ngasekhohlo okanye ngasekunene. Kanye, Ulawulo olukude luyakuyeka ngokuzenzekelayo eli nyathelo. Kwilizwe langaphambili, Xa le tshintsho lijika, Umboniso ohambelanayo uya kuvela kwiscreen. I-← I-arrow ibonisa ithuba lasekhohlo, kunye ne-↑, jika lo mboniso kunye nomboniso ohambelanayo uya kuvela kwiscreen. I-← I-arrow ibonisa ithuba lasekhohlo, and the ↓→ arrow indicates right turn.
Umgaqo omkhulu wesantya semoto enkulu:
Sebenzisa i-Multi jika i-theb, ukujikeleza 1 Igridi ixesha ngalinye, Ixabiso lesantya sotshintsho lwemoto enkulu malunga 0.2 iiyunithi. Fast rotation can quickly modify the speed value of the large motor.
Ummiselo wesantya esincinci:
Sebenzisa i-Multi jika i-theb, kwimowudi yencwadi, Cinezela iqhosha le-ECONA kwaye ujikeleze igridi enye ngexesha，Ixabiso lesantya semoto yasekhohlo nasekunene iguqukile malunga 0.1 iiyunithi, Ukujikeleza okukhawulezayo kunokutshintsha ngokukhawuleza ixabiso lesantya semoto encinci yemoto., Cinezela iqhosha le-ECONA kwaye ujikeleze igridi enye ngexesha,Ixabiso lomda wesantya se-f yotshintsho lwemoto encinci malunga 0.1 iiyunithi. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Ukutshintshwa kwamandla okuDala
The remote control display screen is turned on.

5. Umzobo wemveliso yemveliso

6. Isikhokelo semveliso
6.1 Amanyathelo ofakelo lwemveliso
1. Faka umamkeli kwiKhabhinethi yombane ngokusebenzisa i-buckle ngasemva, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Bhekisa kumzobo wethu we-wiring ye-wiring kwaye uthelekise ngezixhobo zakho zendawo. Connect the equipment to the receiver through wires.
3. Emva kokulungisa umamkeli, Kuyimfuneko ukudibanisa i-eriyali exhotywe kunye nokufaka okanye ukubeka isiphelo sangaphandle se-eriyali ngaphandle kweKhabhinethi yoMbane. Kucetyiswa ukuba uyibeke eqongeni kwiKhabhinethi yoMbane yeyona nto ibalulekileyo. Inqatshelwe ukushiya i-eriyali engakhange ichaphazeleke okanye ibeke ngaphakathi kwiKhabhinethi yoMbane, as it may cause the signal to be unusable.
4. Ekugqibeleni, faka ibhetri kulawulo olukude, qinisa isigqubuthelo sebhetri, kwaye ujike ukutshintshela kwamandla kulawulo olukude. Emva kwescreen esikude sokulawula ibonisa iqhelekile
Isinxibelelanisi sokusebenza, remote control operations can be performed.

6.2 Ubungakanani bofakelo lokufaka

6.3 Umzobo wereferensi ye-Wiring Wiring

7. Imiyalelo yeMveliso yeMveliso
7.1 Useto lweParameter ekude
Indlela yokufaka iiparamitha ezikude zeBackend:

Jika i-POOD kwimowudi yencwadana yemigaqo, lungisa isantya semoto encinci 25 kumacala omabini, okanye 0, 10, 20, 40, 50 Kuwo onke amacala, kwaye ngokuqhubekayo jika utshintsho lwemoto enkulu 3 amaxesha kunye ezantsi 3 amaxesha;
Sebenzisa i “Ulawulo lwesantya esincinci” I-knob ukuya kwi-Flip iphepha, Cinezela iqhosha le-ECONA, kwaye emva koko jika isithuthi esincinci semoto ye-motor knobs ukutshintsha iiparamitha. Emva kokulungiswa, jika iphepha ukuya esiphelweni,khetha “Gcina” ukuphuma, kwaye cinezela iqhosha lokwenza ukuba uphume kwimenyu;
Iiparameter zilandelayo:
Ubuninzi bobuninzi: Uluhlu lwengxelo lwemoto enkulu yangoku, seta uluhlu lwe-15-200A, Ukungagqibeki 100;
I-parameter yesantya: Imowudi yokuzenzekelayo, Imoto encinci iyakhawuleza ikhawuleza okanye icothise ngokukhawuleza,incinci ngokukhawuleza, Uluhlu lweendlela 200-1500, Ukungagqibeki 800;
Iparamera yenkohliso: Misela umda ongaphezulu ovumela isantya semoto ukutshintsha. Xa utshintsho lwangoku lwangoku lungaphaya kweXabiso, Inkohliso iya kwenzeka. Incinci, ikhawuleze inkohliso yeemotors zasekhohlo nasekunene, ngoluhlu lwe 05-12 kunye nokungagqibekanga 06;
Ukukhawulezisa i-A1: Isantya esikhulu semoto, Ikhawuleza iyanda, ngoluhlu lwe 00-06 kunye nokungagqibekanga 01;
Inkohliso A2: Isantya esikhulu semoto, Ikhawuleza iyancipha, ngoluhlu lwe 00-06 kunye nokungagqibekanga 02;
Yenza ummiselo wesantya: Ngaba umgaqo wesantya semoto omncinci kufuneka unikwe amandla? 00 ayenzi, 01 Yenza, Ukungagqibeki 01;
Qala ngokwakho: Ngaba isithuthuthu esikhulu siqhubeka ngokuzenzekelayo emva kokuzivalela emva kokuqhubela phambili kunye nokuguqula ukutshintshwa kuyakhutshwa? 00 ayibambi, 01 bamba, default 01
Uhambo oluninzi: Isantya esiphezulu seMotors esekhohlo nelungileyo, Uluhlu 10-100, Ukungagqibeki 50;
Ukusika okwangoku: Iphezulu yokusika okwangoku, iboniswe kwiscreen njengexabiso le-IC, Uluhlu 15-160, default 30,
Ihambelana ne-IC: 30 iboniswe kwiscreen. Umda ophezulu wale parameter 80% yeyona iphezulu yangoku;
Umda wesantya esingagqibekanga: Isantya esingagqibekanga semoto esizenzekelayo xa ivuliwe kuluhlu lwe 0-100, Ngokungagqibeki kwe 10. Isikrini sibonisa i-F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Imowudi yokuzenzekelayo: Iseti 00, I-switch / switch yokutshintsha kwencwadana iyomda. Iseti 01, I-switch / switch yokutshintsha kwencwadana isetwe kwindawo ezenzekelayo, Isikrini sokubonisa sibonisa ukukhanya, kunye nemveliso yesiphelo sendlela esemva kokuvalwa. Xa usetiwe, I-terminal yemveliso ezenzekelayo ikhutshiwe;
Ukuphambuka kwesantya sokuphambuka: Umda ophezulu wesantya esizenzekelayo sokusika ngokuzenzekelayo sezithuthi ezincinci ukusuka 00 ukuya 200, Ngokungagqibeki kwe 60 kunye nokubonisa okuhambelana nayo 6.0 Kwisikrini; Umda ophezulu wexabiso lokubonisa = umda wesantya se-X 0.1;
Owona mgcini: Isantya esiphezulu semoto enkulu, Uluhlu 10-100, Ukungagqibeki 50;
Izixhobo zeMbus (isinyanzelo): Ukukhetha imodeli enkulu yemoto, Uluhlu 00-03, Ukungagqibeki 03;
00- Shanghai Xelin 01-Fuji
02-I-Int 03-InOvance (Zhongchen, Umpu)
Izixhobo ze-SBUS (isinyanzelo): Imodeli encinci yeModeli yeModeli, Uluhlu 00-05, Ukungagqibeki 03;

00- Shanghai Xelin 01-Fuji
02-I-Int 03-InOvance (Zhongchen, Umpu)

04-I-Anchuanda 05 -Akho

7.2 Ukusetwa kweparamitha ye-frequency classment
1. Ukhetho lomthombo woMyalelo: Umyalelo woNxibelelwano
2. Eyona nto iphambili ekuchongeni: Unxibelelwano olunikezwe
3. Ixabiso le-baud: 19200
4. Ifomati yedatha: Akukho siqinisekiso, Ifomati yedatha<8-N-1>
5. Idilesi yendawo: Cwangcisa i-frequency yasekhohlo ukuya 1, Umguquleli ofanelekileyo wokuhamba 2, kwaye
the large motor frequency converter to 3
7.3 Imiyalelo yokulawula kude
1. Amandla kumatshini, Vula ulawulo olukude, Ngenisa i-backend yokulawula okude, Cwangcisa i
Ulawulo lweBackend ekude, ubukhulu becala ukubeka imoto encinci kunye nemoto enkulu
Iimodeli zokuguqula: (Tsibela eli nyathelo ukuba umenzi womatshini sele eyibeke);
2. Misela iiparamitha zomguqulo wexesha lokuguqula (Tsibela eli nyathelo ukuba umrhwebi womenzi
sele eyibeke);
3. Misela ulawulo olukude kwimodi yencwadana, emva koko sebenzisa ulawulo olude ukuhambisa umatshini ukuze
indawo yokusebenza;
4. Kwimowudi yencwadi, Seta ukusika okwangoku kwi-IC enkulu kwi-IC kunye nesantya semoto enkulu
5. Tshintshela kwimowudi yenzekelayo kwaye usete umda wesantya esisikiweyo;
6. Kwindlela ezenzekelayo, jika utshintsho olukhulu lwemoto ukuya phambili ukuqala imoto enkulu, emva koko jika
Ukutshintshelwa kwemoto encinci ukuya phambili okanye ukubuyela umva, kwaye ulawulo olukude lungena ngokucheba ngokuzenzekelayo
mode to start cutting.

8.Impembelelo kwiNgqondo

9.Isondlo
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Ukuba ayisetyenziswanga ixesha elide, Nceda ususe ibhetri kwaye ugcine ulawulo olukude kunye nebhetri kwicocekile
and safe place.
6.Ngexesha lokugcina kunye nokuhamba, attention should be paid to moisture and shock resistance.

10. Ulwazi ngoKhuseleko
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Nceda ubeke ibhetri ngexesha elifanelekileyo xa ibhetri iphantsi kakhulu ukuba ithintele iimpazamo ezibangelwa
amandla angonelanga, which may result in the remote control being unable to operate.
3. Ukuba ukulungiswa kuyafuneka, Nceda unxibelelane noMvelisi. Ukuba umonakalo ubangelwa kukuzilungisa, umvelisi
will not provide warranty.

Imodeli: Dh01r-4W-26K

Izixhobo ezifanelekileyo:Izixhobo ezahlukeneyo zemizi-mveliso

2.I-Intermes yeMveliso

Phawula: Ungayikhetha enye yee-antetenas ezintathu. The suction cup antenna is standard by default.

3.Inkcazo yemodeli yemveliso

Phawula:
① DH01r uthotho, Ukuba isimamva siqulathe i-t, Kuthetha ukuyeka okungxamisekileyo;ngaphandle kwe-t, it means without emergency stop output.

I-②IF akukho kungekho mveliso ye-alog, Akukho sidingo sokuthetha 0w okanye 0; I-Analogrounties w1, W2, W3, kunye ne-W4 engagqibekanga kwi-0-10v Anailog Voltrage Iziphumo; ngaxeshanye, I-W1 kunye ne-W2 inokwandiswa 2 I-Outodratital Poterital Potendometer Iziphumo, ngoluhlu lwe 0 -5Kmms, ½ i-watt; isisombululo: 20 ohms. Ezi zinto zimbini zedijithali zinokusetyenziselwa ukulawula i-uplding yangoku kunye ne-welding voltage yomatshini we-welding. Ukuba iziphumo zedijithali zedijithali ziyafuneka, user notes are required.

Igalelo le-④analog, ukusukela 1 ukuya 2, ibonisa ukuba kukho 1 ukuya 2 Igalelo le-analog(ubuninzi 2 Iindlela); Xa kukho igalelo le-analog, Kuya kufuneka uqaphele uluhlu lwevolthi yegalelo le-analog (Ukungasebenzi kakuhle 0 -5V, Umsebenzisi unokuqaphela njengoko 4-20 ma okanye 0-10v, njl.) kunye noluhlu oluhambelanayo lomdlalo we-analog (umzekelo: bonisa 0-100 i-volts okanye 0-1000 i-amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Iimbonakalo

1) Ubuninzi 26 Iziphumo ezidluliselweyo;
2) Ubuninzi 4 Iindlela ze-analog 0-10v Iziphumo (Uluhlu lokubonisa lunokwenziwa ngokwezifiso): Inkxaso 2 Iindlela zokwahlulahlulahlulahlulahlulahlulahlulahlula i-porital poidital Imveliso;
3) I-2 igalelo le-analog; kwaye iboniswe kulawulo olukude, Uluhlu lokubonisa lunokwenziwa ngokwezifiso
4) Iindlela ezi-1 zendawo yokumisa engxamisekileyo;
5) Ixhaswa ngu 3 Iibhetri, Uyilo loMsebenzi oPhantsi;
6) Umgama wokusebenza ngaphandle kwentambo 200 iimitha;
7)) I-IP67 yoKhuselo I-IP67;
8) Ngomsebenzi wokutshintsha, Ixhasa i-4-comples ezimbini;
9）Back strap design.

5.Inkcazo yolawulo lokuCetyiswa kude

6.Intshayelelo Umxholo Intshayelelo

Ixabiso le-W1: W1: 0-1000 (Ipharamitha eguqukayo 0-9999)
Ixabiso le-w2 knob: W2: 0-5000 (Ipharamitha eguqukayo 0-9999)
Ixabiso le-W3: W3: 0-5000 (Ipharamitha eguqukayo 0-9999)
Ixabiso le-w4 lwexabiso: W4: 0-5000 (Ipharamitha eguqukayo 0-9999)
Ingxelo yeNgxelo ye-ADC: 0-1000 (Ipharamitha eguqukayo 0-5000)
I-ADC: 0-1000 (Ipharamitha eguqukayo 0-5000)

I-voltage esezantsi: Ibhetri yokulawula okude iphantsi kakhulu, please replace the battery.

Inethiwekhi ilahlekile: Umqondiso ongenazingcingo uyaphazamiseka. Nceda ujonge amandla omntu ofumanayo, amandla kwakhona, and restart the remote control.

7.Imiyalelo yokulawula kude Imiyalelo

1) Vula ulawulo olukude
Xa umntu ofumana amandla enziwa, Isalathisi esisebenzayo somamkeli; faka iibhetri ezimbini ze-AA kulawulo olukude, vula i-switch yombane, kwaye umboniso ubonisa ixabiso,Ukubonisa ukuqala kwempumelelo. The receiver working indicator light becomes solid.
2) Shicilela kwaye usebenze ngamaqhosha
Nakuphi na ukusebenza kweqhosha le-twist kunye neqhosha kulawulo olukude kunokulawula indawo yokuphuma yomqondiso ohambelana nomqondiso kwinqaku. Zonke iindawo zokuphuhlisa isiginali kwi-witR of Amkeli zihlala zivulekile ngokuzenzekelayo;
3) I-W1-W4 yoLungiso ngokukhawuleza
Jikelezisa amanqwanqwa kwi-W1-W4 ngokungacacanga ukuba isebenze ngokuhambelana ne-Assolog Expal Premen. I-ANANAG EXTAL STORK KWI-GARD SEPERRE YEMPAHLA KWI-0V Voltage Translation, kunye ne-potiometer yomqondiso kwi-0-3k;
4) Umsebenzi wokumisa ngexesha likaxakeka
Xa iqhosha lokumisa ngexesha likaxakeka licinezelwe, Zonke izinto zokutshintsha isiginali zikhutshiwe kwaye igalelo le-Analog linqunyulwe; Emva kokuba ikhutshiwe kwimo engxamisekileyo, Zonke iimpawu zokutshintsha ziyabuyiselwa kwaye iziphumo ze-analog ziyabuyiselwa; 5 imizuzwana emva kokuba ulawulo olukude lucinyiwe, Zonke iziphumo zokutshintsha isiginali zikhutshiwe kwaye inani le-analog zihlala zingaguqukanga. Xa ulawulo olukude luvuliwe, Iziphumo zokuGqibela ukutshintsha ngokuzenzekelayo;
5) Imenyu yeparamitha (Abasebenzisi abakwazanga ukuguqula ngasese)
Eminye imisebenzi yolawulo olukude inokuhlengahlengiswa ngeparamitha. Xa isiboniso se-w1 = 0, Cinezela iqhosha le-K9-B 3 amaxesha ngokulandelelana, kwaye emva koko cinezela i-K9-Iqhosha 3 amaxesha kumqolo ukufaka imenyu yeparamitha; I-K9-A kunye ne-N9-B iphepha lemenyu kwimenyu kwaye ukhethe iiparamitha; bamba phantsi k1-a, emva koko cinezela iqhosha le-K9-A / B ukutshintsha iiparamitha;
Phuma kwimenyu yeparamitha: Khetha ukugcina okanye ungagcini, emva koko cinezela i-K1-A iqhosha ukuqinisekisa ukuphuma;
I-F1W1 Uluhlu: Ixabiso le-BHODI YOKUGQIBELA ye-W1 knob kwiscreen sombolo, iguqukile kwi 0 ukuya 9999;
F2W2 Uluhlu: Ixabiso lodidi lokubonisa lwe-W2 knob kwiscreen sombolo, iguqukile kwi 0 ukuya 9999;
I-F3W3 Uluhlu: Ixabiso lodidi lokubonisa lwe-W3 kwiscreen esibonisa, iguqukile kwi 0 ukuya 9999;
I-F4W4 Uluhlu: Ixabiso le-bood le-W5 kwiscreen esibonisa, iguqukile kwi 0 to 9999
I-F5A1 uluhlu: Veza ixabiso le-ADC, 0-5000 iguqukile;
I-F6A2 uluhlu: Veza i-ADC ye-ADC, 0-5000 iguqukile;
I-alam yangoku: Cwangcisa ixabiso lealam le-ADC1 kunye ne-ADC. Xa i-ADC1 kunye ne-ADC2 idlula elixabiso, Umboniso wokulawula okude uya kuvusa; Xa elixabiso liyi-0, umsebenzi we-alarm akasebenzi;

8.Ukulawulwa kwempawu ezikude

9.Ubungakanani bolawulo olude

The final interpretation right of this product belongs only to our company.

Imodeli: DH12S-P6S

Izixhobo ezifanelekileyo:wire saw/blade saw machine

2.I-Intermes yeMveliso

Phawula: Ungayikhetha enye yee-antetenas ezintathu. The suction cup antenna is standard by default.

3.Inkcazo yolawulo lokuCetyiswa kude

4.Intshayelelo yeSiseko

Main motor speed: Main: 0-50
Traveling motor speed: Line: 0-50
Maximum speed limit of automatic cutting traveling motor: Speed: 0-30
(Iiparamitha eziguqukayo)
Automatic cutting main motor setting current: Setting: 28 (Iiparamitha eziguqukayo)
Swing arm motor speed: Swing: 0-50

I-voltage esezantsi: Ibhetri yokulawula okude iphantsi kakhulu, please replace the battery.

Inethiwekhi ilahlekile: Umqondiso ongenazingcingo uyaphazamiseka. Nceda ujonge amandla omntu ofumanayo, amandla kwakhona, and restart the remote control.

5.Imiyalelo yokulawula kude Imiyalelo

1）Turn on the remote control

Xa umntu ofumana amandla enziwa, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; faka iibhetri ezimbini ze-AA kulawulo olukude, vula i-switch yombane, and the display will show the motor speed, indicating successful startup.

2）Large motor and speed regulation/Main motor and speed regulation

Press and hold “Speed Regulation Enable”, jika “Thumela / ubuye umva” Tshintshela phambili, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, jika “Thumela / ubuye umva” tshintsha ukubuyela umva, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Jikelezisa “big motor” knob to adjust the speed regulation voltage of the receiver’s main motor inverter to 0-10V;

3）Traveling motor

Press and hold “Speed Adjustment Enable”, jika “Thumela / ubuye umva” switch to forward or backward, and the walking motor will move at a high speed of 50;

4）Swing arm motor and speed regulation

Jika “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;

Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” tshintsha, the swing arm motor will move at a high speed of 50;

5）Travel motor speed limit adjustment

Cinezela ubambe i “speed adjustment enable” iqhosha kwaye ujikeleze i “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “thumela / ubuye umva” switch forward or backward to enter the automatic cutting mode;

7） Parameter menu (Abasebenzisi abavumelekanga ukuba bangayiguquli ngaphandle kwemvume)

Enter the parameter menu:Kwimowudi yencwadi, when the main motor speed is 0, tyhala phambili / ukuphinda usebenzise amaxesha amathathu ngokulandelelana, and then push it down three times in a row to enterthe parameter menu;
Phuma kwimenyu yeparamitha: Turn the speed adjustment knob, select save or not save, and press the enable button to confirm;
Rated current: The maximum value of the main motor current, unit Ampere;
Speed adjustment parameters: Automatic cutting control parameters, Ukungagqibeki 800, unit milli second,Utshintsho aluvumelekanga;
Iparamera yenkohliso: Xa ixabiso lokusika litshintshe ixabiso lingaphezulu kwexabiso, rapid deceleration begins, unit Ampere;
Ukukhawulezisa i-A1: When the cutting current is lower than the set cutting current, the speed value increased by each acceleration of the walking motor;
Inkohliso A2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, Utshintsho aluvumelekanga;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, Utshintsho aluvumelekanga;
Ubuninzi bobuninzi: The range of main motor feedback current, unit Ampere;
Owona mgcini: Remote control main motor speed adjustment display range;
Uhambo oluninzi: Invalid parameter;
Isantya sokunciphisa umda: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Add and subtract the offset increment of the sensitivity parameter;
Set current: Ukusika ngokuzenzekelayo, the threshold of main motor feedback current. If this value is exceeded,the walking motor starts to decelerate;Below this value, the walking motor starts to accelerate;iyunithi: Ampere;
Idling exit: When the automatic mode starts, if the main motor feedback current is less than this value,it will be in the idling mode.If it is greaterthan this value, it will exit the idling mode and enter the cutting mode.Unit is ampere;
No-load current:When automatic mode starts, if the main motor feedback current is less than this value,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;otherwise, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;

6.Ukulawulwa kwempawu ezikude

7.Ubungakanani bolawulo olude

The final interpretation right of this product belongs only to our company.

Imodeli: Dh12s-ld

Izixhobo ezifanelekileyo:I-wire yocingo lomkhenkce

I-Intermes yeMveliso

Phawula: Ungayikhetha enye yee-antetenas ezintathu. The suction cup antenna is standard by default.

Inkcazo yolawulo lokuCetyiswa kude

Intshayelelo yeSiseko

Isantya esikhulu semoto：S1：0-50
Isantya esincinci seemoto: S2: 0-50
I-ShestspeditooOonoomatic cuttingsMortor:F:0-30(I-parameterblechast)
Ukusika ngokuzenzekelayo okwangoku: Ndiyabona: 0-35 (Iiparamitha eziguqukayo)
Ixabiso lokulungisa: Df: -99-99 (1 Iyunithi imalunga ne-0.02v)

I-voltage esezantsi: Ibhetri yokulawula okude iphantsi kakhulu, please replace the battery.

Inethiwekhi ilahlekile: Umqondiso ongenazingcingo uyaphazamiseka. Nceda ujonge amandla omntu ofumanayo, amandla kwakhona, and restart the remote control.

Imiyalelo yokulawula kude Imiyalelo

1.Vula ulawulo olukude

Xa ixhotywe, ukukhanya kwe-rf-khokela umntu ofumanayo eqala ukuqaqamba;faka iibhetri ezimbini ze-AA kwisitayile esiyintloko, vula i-switch yombane, I-andbing iya kubonisa isantya semoto, indicating successful startup.

2.Imoto enkulu kunye nesantya sommiselo

Jika “thumela / ubuye umva” Tshintshela phambili, Imoto enkulu yemoto iya kuvula, kwaye umboniso uya kubonisa phambili

Jika “thumela / ubuye umva” tshintsha ukubuyela umva, Imoto enkulu yomamkeli iya kuvula umva, kwaye umboniso uya kubonisa ukubuyela umva

Jikelezisa “Uhlengahlengiso olukhulu lwemoto” I-knob ukuhlengahlengisa isantya esikhulu sokufumana isantya se-voltage;

3.Imoto encinci kunye nommiselo wesantya

Hambisa i “thumela / ubuye umva” Tshintshela phambili, Ivili lasekhohlo ngaphambili kunye nevili lasekunene ngaphambili komntwana ovunyiweyo, kwaye umboniso ubonakalisa phambili

Jika “Thumela / ubuye umva” tshintsha ukubuyela umva, Isondo lasekhohlo lokubuyela umva kunye nokubuya kwamavili abuyiselweyo kuvuliwe, kwaye umboniso ubonakalisa ukubuyela umva

4.Jika ngasekhohlo nasekunene

Jika “Ekhohlo ekunene” Tshintshela ngasekhohlo, ivili lasekunene lika-Realr liya phambili kwaye livulwe,kwaye umboniso uya kubonisa ekhohlo

Jika “jika ngasekhohlo / ngasekunene” tshintsha ukuze ujike ekunene, Ivili lasekhohlo lomlimi liya kuhamba kwaye livule, kwaye umboniso uya kubonisa ukuba ujike

5.Jika

Kwimowudi yencwadi:
Jika ngasekhohlo: Cinezela ubambe i “Yenza” iqhosha, jika “Ikhohlo / ngasekunene” Tshintshela ngasekhohlo, Ivili lasekhohlo elingasemva kunye ne-Wheel ekunene ngaphambili komsebenzi ivuliwe,kwaye uqale ukujika ngasekhohlo endaweni;

Jika ngasekunene kwindawo: Cinezela ubambe i “Yenza” iqhosha, jika “Ikhohlo / ngasekunene” Tshintshela ngasekunene, Ivili lasekhohlo ngaphambili kunye ne-hehel ye-hehel ye-Wheel evaliwe, kwaye umamkeli uqalisa ukujika ngasekunene kwindawo;

6.Uhlengahlengiso oluncinci lwemoto

Kwindlela ezenzekelayo: Cinezela ubambe i “Yenza” iqhosha kwaye ujikeleze i “Uhlengahlengiso oluncinci lwemoto” Ukulungelelanisa isantya esiphezulu semoto encinci ngexesha lokusika ngokuzenzekelayo;

7.Ukusika ngokuzenzekelayo

Inyathelo lokuqala kukuqalisa imoto enkulu; Inyathelo lesibini kukutshintsha i-modes yokutshintshela kwi “Auto”; Inyathelo lesithathu kukuqalisa inqwelo-moya kunye nesikrini siya kubonisa “Ukusika i-Auto”,ibonisa ukuba ifake imowudi yokusika ngokuzenzekelayo;

8. Ukulungiswa komgca ngqo

Xa iikoto zemoto zasekhohlo nasekunene zihamba phambili kwaye zibuyela umva, Isantya sasekhohlo nasekunene asihambelani, kunye nomgca othe nkqo. Ungasebenzisa umsebenzi wokulungisa umda wolawulo oluphezulu ukuze ube nesantya sexesha lasekhohlo nelasekunene;
Umgaqo Wokulungelelanisa Umgaqo: Ngomsebenzi wokulungisa, isantya sevili lasekhohlo lilungile ukuze lifike kwikhawulezi enye njengevili lasekunene, Ke ukuvumelanisa isantya se-vili lasekhohlo kunye nelasekunene kwaye ushenxise ukuphambuka;
Indlela yokuGcina yokuGcina: Kwimowudi yencwadi, Cinezela ubambe i “Yenza” iqhosha kwaye ujikeleze i “Ummiselo wesantya esincinci”;
Jikelezisa iwotshi yokwandisa i-voltage yesantya sasekhohlo kunye nexabiso lokulungisa kwiscreen esibonisa;
Jikelezisa i-ActClock ukunciphisa i-Wheel yeNdawo yeNdawo yasekhohlo kunye nexabiso lokubonisa lokubonisa ukuncipha;
Uluhlu lokulungisa: Ixabiso lokulungisa -90 ukuya 90; I-volt yoluleko yeyunithi enye yokulungisa imalunga ne-0.02v;

9. Imenyu yeparamitha (Abasebenzisi abavumelekanga ukuba bangayiguquli ngaphandle kwemvume)

Eminye imisebenzi yolawulo olukude inokuhlengahlengiswa ngeparamitha. Kwimowudi yencwadi, Xa isantya esincinci sezithuthi s2 10, tyhala phambili / ukuphinda usebenzise amaxesha amathathu ngokulandelelana, kwaye emva koko tyhala phantsi kathathu kumqolo wokungena kwimenyu yeparamitha;
Phuma kwimenyu yeparamitha: Khetha ukugcina okanye ungagcini, Emva koko cinezela iqhosha lokwenza ukuba uqinisekise ukuphuma;
Ubuninzi bobuninzi: Ukusebenza okuqhelekileyo kwimoto yokusika 80% yale cleyt;
I-parameter yesantya: Iiparamitha zokulawula ezenzekelayo, Ukungagqibeki 800, Utshintsho aluvumelekanga;
Iparamera yenkohliso: Ipharamitha yokuhlawula ezenzekelayo. Xa ixabiso lokusika litshintshe ixabiso lingaphezulu kwexabiso,deceleration begins.
Ukukhawulezisa i-A1: Ipharamitha yokuhlawula ezenzekelayo, Xa ukusika okwangoku kuphantsi kune-cuted cuteng yangoku, isantya sokukhawulezisa;
Inkohliso A2: Ipharamitha yokuhlawula ezenzekelayo, Xa ukusika okwangoku kuphakamile kuneseti
Ukusika okwangoku, isantya senkohliso;
Ukurhoxiswa kwe-monife: ayisebenzi;
Qala ngokwakho: 0, Akukho mntu ulivayo; 1, Ukuzithemba. Cinezela iqhosha leKwenzile + forward and reverse to take effect and self-lock.
Uhambo oluninzi: the maximum speed of the small motor.
Ukusika okwangoku: Cwangcisa eyona moto iphambili kwimoto ephambili yokusika ngokuzenzekelayo. Ukuba ingxelo yangoku idlula ngelixabiso, it will start to decelerate.
Umda wesantya esingagqibekanga: the default maximum speed of automatic cutting speed when turning on the machine.
Imowudi yokuzenzekelayo: 0, I-switch ngokuzenzekelayo ilawulwa ngokuzenzekelayo; 1, the automatic switch controls the automatic IO output point.
Isantya sokunciphisa umda: the maximum speed of the small motor during automatic cutting.
Owona mgcini: maximum speed of large motor.

Ukulawulwa kwempawu ezikude

Ubungakanani bolawulo olude

The final interpretation right of this product belongs only to our company.