Incwadana yemiyalelo yesandla se-Woman

xia xiaoqin — Wed, 05 Nov 2025 06:13:13 +0000

1. Intshayelelo Intshayelelo

I-Elektrone ye-elektroniki isetyenziselwa ukukhokelwa ngesandla, ukubeka, Ulungelelwaniso lwesixhobo, kunye neminye imisebenzi kwizixhobo ze-CNC zoMatshini. Le modeli ye-elektroniki ye-elektroniki i-seemens i-seemens ebonakalayo. Isandla siqhagamshelwe kumntu we-X130 wenkqubo ye-NEEMEPS ngentambo yenethiwekhi, kwaye inkqubo yokulungelelaniswa kwenkqubo ifundwa kwaye iboniswe kwiscd yesikrini se-LCD yoNxibelelwano lweProtokholi ye-S7. Isandla sinokulawula ukukhetha kwenkqubo ye-Axis, ukuqina, amaqhosha, andother signals through communication.

2.Imveliso yeMveliso

1. Sebenzisa i-plug ye-plug ye-6-ombi yokuhamba, Ngobude bekhefu ye-handheel 10 meters.

2. Isikrini sesandla sinokubonisa ukulungelelanisa inkqubo yenkqubo, ulungelelwaniso lwendlela,Ireyithi yokondla, ukhetho lwe-axis, ukuqina, and other information.

3. Inkxaso yeXesha leMiselweyo, Guqula iziphumo zomqondiso, and the hand wheel shutdown emergency stop is still valid.

4. Inkxaso 6 amaqhosha esiqhelo, Guqula imiqondiso ye-io, and can output signals to the system through IO wiring or communication.

5. Inkxaso 6 okanye 8 Ulawulo lwe-axis, with switch IO signals that can be output to the system through IO wiring or communication.

6. Inkxaso 3 okanye 4 amanqanaba olawulo lukhuni, with switch IO signals that can be output to the system through IO wiring or communication.

7. Inkxaso ePulse ePulser, 100 Ukuphosa / ukujika, can output signals to the system through AB pulse wiring.

8. Inkxaso yeS4 IProtokholi yeS7 IProtokholi yeS7 IProtokholi ye-828D, 840I-DSL, ONE and other model systems.

3. Imveliso yemveliso

Ukusebenza kwesandla esisebenzayo	I-DC24V / 1A
I-voltage yombane wamandla	I-DC24V / 1A
Uluhlu lwemveliso ye-IO	I-DC24V
I-HEAD SPALE YOKUGQIBELA	10m
Ubude bokuphela kwentambo	1m
I-Cami Supere ye-Cable ye-Cable	3m
Iqondo lokusebenza	-25℃
Ukuphakama okuchasene	1m
Ubungakanani beQela	6
Ubungakanani bemveliso	23390.777.4(Mm)

4.Umsebenzi wemveliso

Phawula:

Iqhosha lokumisa elingxamisekileyo:

Cinezela iqhosha lokumisa elingxamisekileyo, kunye neeseti ezimbini zexesha lokumisa imeko ezingxamisekileyo kwi-Ofisi kamamkeli ziya kuncitshiswa, and all functions of the handwheel will be invalid.

Emva kokukhupha indawo yokumisa ngexesha likaxakeka, indawo yokumisa imeko ye-IO ikhuphele kwi-mamkeli, and all functions of the handwheel are restored.

Umboniso we-screen:

Plc: 0000 ibonisa ukuba intambo yenethiwekhi ayixhunyiwe, Plc: 1010 indicates that the network cable is successfully connected to the PLC system.

Plc: 1110 imele ukubhala ngempumelelo kwedatha yenkqubo ukuya kwi-handheel, Plc: 0001 represents successful connection to the computer.

Iqhosha lesiko:

6 amaqhosha esiqhelo, nganye ihambelana nendawo yokuphuma ye-IO kwi-mamkeli, also connected to the system through communication.

I-Axis Ukhetho lokuKhetha i-Axis:

The axis selection switch can switch the movement axis controlled by the handwheel.

⑤ Iqhosha le:

Cinezela kwaye ubambe iqhosha le-QINO kumacala omabini ukuvula i-pulseder encoder ngokuthoba. Kwaye la maqela mabini amkelayo anika i-IO ukhuphelo lokuziphatha, release the enable button to enable IO output to disconnect.

⑥ Ukutshintsha kwezinto:Isitshisi sokutshintsha sinokuvula isibane

controlled by the handwheel.

⑦ pulse encoder:

Cinezela kwaye ubambe iqhosha, gungxusa i-pulse encoder, ikhupha uphawu lwepulse, and control the movement of the machine axis.

⑧ Intambo ye-handheel:

Intambo exhuma i-handheel kwaye yamkele, iplagi yenqwelo moya, used for handwheel power supply and communication.

5. Umzobo wemveliso yemveliso

6. Isikhokelo semveliso
6.1 Amanyathelo ofakelo lwemveliso

1. Install the receiver into the electrical cabinet through the screw holes at the four corners.

2. Bhekisa kumzobo wethu we-wiring ye-wiring kwaye uthelekise ngezixhobo zakho zendawo. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.

3. Emva kokulungisa umamkeli, Faka i-plug ye-plug kwisiseko se-handheel yokuvula iPaneli, kunye neplagi enye isiseko se-oced kwimbonakalo yesandla kwi-mamkeli. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

6.2 Ubungakanani bofakelo lokufaka

6.3 Imilinganiselo yofakelo lweeplagi zenkonzo

6.4 Umzobo wereferensi ye-Wiring Wiring
7.Imiyalelo yeMveliso yeMveliso

1. Xa umamkeli exhotyiswa kunye nesalathisi sokusebenza ukukhanya kwevaliwe, Qhagamshela umamkeli kwikhompyuter ngentambo yenethiwekhi, Seta idilesi ye-IP eSisileyo yekhompyuter, kwaye usebenzise isoftware yoqwalaselo yenethiwekhi ukuseta iiparamitha zenethiwekhi yomsebenzi wesandla. Ngeendlela ezithile zokuseta, bhekisa kwi “I-LXWGP-ETS SIRD SIRDINHIEL SIDS”.

2.Emva kokuba umntu amkelwe, Inkqubo kufuneka isebenze inkqubo ye-plc. Nceda ujonge kwi “I-LXWGP-ETS I-NTS ye-Imemens yamanani” and PLC program routine materials for details.

3.Emva kokuba ugqibezele lesethingi yentla, Thatha umamkeli kwiKhabhinethi yoMbane woMatshini kwaye uyifake. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.Emva kokuba ugqibezele lesethingi yentla, Thatha umamkeli kwiKhabhinethi yoMbane woMatshini kwaye uyifake. Khupha intambo yenethiwekhi kwikhompyuter kwaye iqhube kwi-X ye-X yenkqubo yenkqubo. Connect the receiver power supply and pulse line.

5. Khetha ukhetho lwe-Axis: Switch the axis selection switch and select the axis you want to operate on.

6. Khetha amandla: Switch the magnification switch and select the magnification level you need.

7. I-Axis eshukumayo: Cinezela kwaye ubambe iqhosha, Khetha utshintsho lokukhetha i-Axis, Khetha utshintsho olwenziyo, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.

8. Cinezela kwaye ubambe nayiphi na iqhosha lesiko ukuvula iziphumo ze-IO iqhosha elihambelanayo kwi-mamkeli, and release the button to turn off the output.

9. Cinezela iqhosha lokumisa elingxamisekileyo, I-temotivemes yokumisa i-IO ikhuphele i-mamkeli iya kuncitshiswa, Umsebenzi we-handheel uya kukhubazeka, Khupha iqhosha lokumisa ngexesha likaxakeka, Indawo yokumisa imeko ye-IO ikhuphe ivaliwe, and the handwheel function will be restored.

8.Inkcazo yemodeli yemveliso

I-Lxwwgp imele isitayile sokungenisa, kunye nojongano lonxibelelwano

is an Ethernet interface.

② : Represents Siemens system specific.

③ : imele inani lokukhetha i-axis, imele i-axes, kwaye imele

axes.

④ : imele uhlobo lokukhetha i-axis kunye nokukhulisa isibonakaliso, Imele

I-Point-to-Contal, and B represents encoded output signal.

9.Ingxaki yokudubula

10.Isondlo

1. Please use it in a dry environment at room temperature and pressure to extend its service life.

2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.

3. Please keep the appearance of the handwheel clean to extend its service life.

4. Nceda uphephe ukuntywila, ukuwa, ukugoba, njl. to prevent damage to the precision components inside the handwheel or accuracy errors.

5. Ukuba ayisetyenziswanga ixesha elide, Nceda ugcine ngesandla kwindawo ecocekileyo nekhuselekileyo. Ukugcinwa nokugcinwa kunye nokuhamba, attention should be paid to moisture and shock resistance.

11. Ulwazi ngoKhuseleko

1. Please read the instructions carefully before use and prohibit non professionals from operating.

2. Ukuba nayiphi na imeko engaqhelekanga yenzeka nge-handheel, Nceda uyeke ukuyisebenzisa kwangoko kwaye uyicofe ingxaki. Ngaphambi kokucocwa, Akuvumelekanga ukusebenzisa i-verweel engalunganga kwakhona ukuthintela iingozi zokhuseleko ezibangelwa ziimpazamo zesandla esingaziwayo;

3. Ukuba ukulungiswa kuyafuneka, Nceda unxibelelane noMvelisi. Ukuba umonakalo ubangelwa kukuzilungisa, Umenzi akazukubonelela ngewaranti

Ukungahlelwanga – Itekhnoloji ye-WXHC

Incwadana yemiyalelo yesandla se-Woman