1.Intshayelelo Intshayelelo

2.Iimpawu zeMveliso

Cinezela kwaye ubambe iqhosha, then toggling the axis selection switch can control the movement of axis .Press and hold the enable button, then toggle the axis selection switch to switch the motion axis controlled by the remote control. Toggle the switch from the OFF position to any axis position, and the remote control will power on automatically.

④ Pulse Encoder:

Press and hold the enable button and rotate the pulse encoder, it will output pulse signals to control the movement of the machine axis.

⑤ LCD Display Screen:

5. Product Accessories Diagram

 

6. Isikhokelo semveliso

6.1 Amanyathelo ofakelo lwemveliso

1. Install the receiver in the electrical cabinet via the buckle on its back, or mount it inside the electrical cabinet through the screw holes at the four corners of the receiver.

2. Jonga umzobo wethu we-wiring, Thelekisa nesixhobo sakho sendawo, and connect the equipment to the receiver with cables.

3. After the receiver is fixed in place, install the supporting antenna of the receiver properly. Mount or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for optimal signal performance. Do not leave the antenna uninstalled or place it inside the electrical cabinet; kungenjalo, signal failure may occur.

4. Ekugqibeleni, turn on the remote control power switch, then you can remotely operate the machine via the remote control.

6.2 Receiver Installation Dimensions

6.3 Umzobo wereferensi ye-Wiring Wiring

7. Imiyalelo yeMveliso yeMveliso

1. Amandla kumatshini kunye nomamkeli. The receiver operation indicator flashes. After the wireless electronic remote control is fully charged, toggle it from the OFF gear to the X-axis gear, and the remote control display lights up.

2. Select the axis : Cinezela kwaye ubambe iqhosha, toggle the axis selection switch to select the axis to be operated.

3. Select the magnification: Cinezela kwaye ubambe iqhosha, toggle the magnification switch to select the required magnification gear.

4. Axis movement: Cinezela kwaye ubambe iqhosha, select the axis selection switch and the magnification switch, then rotate the pulse encoder. Rotate clockwise to move the axis in the positive direction, and rotate counterclockwise to move the axis in the negative direction.

5. Cinezela kwaye ubambe nayiphi na iqhosha lesiqhelo, the corresponding button IO output of the receiver will turn on; release the button, and the output will turn off.

6. Cinezela iqhosha lokumisa elingxamisekileyo, the corresponding emergency stop IO output of the receiver disconnects and the remote control function becomes invalid. Release the emergency stop button, the emergency stop IO output closes and the remote control function is restored.

7. If the wireless remote control is not operated for a period of time, iyakungena ngokuzenzekelayo imo yokulala ukunciphisa ukusetyenziswa kwamandla. It can be used normally again by pressing the enable button again.

8.If the wireless remote control is not used for a long time, turn the axis switch to OFF to turn off the power and extend battery life

8. Inkcazo yemodeli yemveliso

①：UWGP stands for appearance style.

②：Pulse Output Parameters：

05: Ibonisa umgangatho wePNP ephezulu yePNP, Nge-pulsemesmes iziphumo ze-A kunye ne-b; The number of pulses is 100PPR.

③：Represents the axis selection switch quantity; 6 stands for 6 izembe, 7 stands for 7 izembe, and so on.

④: Represents the signal type of the axis selection switch.A stands for point-to-point output signal, and B stands for encoder output signal.

⑤: Represents the signal type of the magnification switch.A stands for point-to-point output signal, and B stands for encoder output signal.

⑥: Imele inani lamaqhosha esiko; 3 corresponds to 6 custom buttons.

⑦: Represents the power supply for the system remote control. 05 stands for 5V power supply, kwaye 24 stands for 24V power supply.

⑧: Represents the contact charging mode. It starts charging automatically when placed back on the charging base.

9. Impembelelo kwiNgqondo

 

10. Maintenance and upkeep

1. Please use it in a dry environment at room temperature and pressure to extend its service life.

2. Please avoid using in abnormal environments such as rain and water to extend the service life.

3. Please keep the appearance of the remote control clean to extend its service life.

4. Please avoid crushing, dropping, or bumping, njl. to prevent damage to the precision components inside the remote control or accuracy errors.

5. Ukuba ayisetyenziswanga ixesha elide, please store the remote control in a clean and safe place.

6. Avoid moisture and shock during storage and transportation.

1. Intshayelelo Intshayelelo

Ukusebenza kwesandla esisebenzayo	I-DC24V / 1A
I-voltage yombane wamandla	I-DC24V / 1A
Uluhlu lwemveliso ye-IO	I-DC24V
I-HEAD SPALE YOKUGQIBELA	10m
Ubude bokuphela kwentambo	1m
I-Cami Supere ye-Cable ye-Cable	3m
Iqondo lokusebenza	-25℃<X<55℃
Ukuphakama okuchasene	1m
Ubungakanani beQela	6
Ubungakanani bemveliso	233*90.7*77.4(Mm)

4.Umsebenzi wemveliso

Phawula:

Iqhosha lokumisa elingxamisekileyo:

Cinezela iqhosha lokumisa elingxamisekileyo, kunye neeseti ezimbini zexesha lokumisa imeko ezingxamisekileyo kwi-Ofisi kamamkeli ziya kuncitshiswa, and all functions of the handwheel will be invalid.

Emva kokukhupha indawo yokumisa ngexesha likaxakeka, indawo yokumisa imeko ye-IO ikhuphele kwi-mamkeli, and all functions of the handwheel are restored.

Umboniso we-screen:

6.2 Ubungakanani bofakelo lokufaka

6.3 Imilinganiselo yofakelo lweeplagi zenkonzo

6.4 Umzobo wereferensi ye-Wiring Wiring
7.Imiyalelo yeMveliso yeMveliso

1. Xa umamkeli exhotyiswa kunye nesalathisi sokusebenza ukukhanya kwevaliwe, Qhagamshela umamkeli kwikhompyuter ngentambo yenethiwekhi, Seta idilesi ye-IP eSisileyo yekhompyuter, kwaye usebenzise isoftware yoqwalaselo yenethiwekhi ukuseta iiparamitha zenethiwekhi yomsebenzi wesandla. Ngeendlela ezithile zokuseta, bhekisa kwi “I-LXWGP-ETS SIRD SIRDINHIEL SIDS”.

2.Emva kokuba umntu amkelwe, Inkqubo kufuneka isebenze inkqubo ye-plc. Nceda ujonge kwi “I-LXWGP-ETS I-NTS ye-Imemens yamanani” and PLC program routine materials for details.

3.Emva kokuba ugqibezele lesethingi yentla, Thatha umamkeli kwiKhabhinethi yoMbane woMatshini kwaye uyifake. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.Emva kokuba ugqibezele lesethingi yentla, Thatha umamkeli kwiKhabhinethi yoMbane woMatshini kwaye uyifake. Khupha intambo yenethiwekhi kwikhompyuter kwaye iqhube kwi-X ye-X yenkqubo yenkqubo. Connect the receiver power supply and pulse line.

5. Khetha ukhetho lwe-Axis: Switch the axis selection switch and select the axis you want to operate on.

6. Khetha amandla: Switch the magnification switch and select the magnification level you need.

7. I-Axis eshukumayo: Cinezela kwaye ubambe iqhosha, Khetha utshintsho lokukhetha i-Axis, Khetha utshintsho olwenziyo, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.

8. Cinezela kwaye ubambe nayiphi na iqhosha lesiko ukuvula iziphumo ze-IO iqhosha elihambelanayo kwi-mamkeli, and release the button to turn off the output.

9. Cinezela iqhosha lokumisa elingxamisekileyo, I-temotivemes yokumisa i-IO ikhuphele i-mamkeli iya kuncitshiswa, Umsebenzi we-handheel uya kukhubazeka, Khupha iqhosha lokumisa ngexesha likaxakeka, Indawo yokumisa imeko ye-IO ikhuphe ivaliwe, and the handwheel function will be restored.

8.Inkcazo yemodeli yemveliso

9.Ingxaki yokudubula

1.Intshayelelo Intshayelelo

2. Imveliso yeMveliso

3. Imveliso yemveliso

I-voltage esebenzayo kunye ne-current ye-wireless remote	3V/14MA
Iinkcukacha zebhetri	2 AA iibhetri zealkaline, size 5
Uluhlu lwealam yombane ophantsi weremowuthi engenazingcingo	< 2.3V
I-voltage yombane wamandla	I-DC5V-24V/A
Uluhlu lomthwalo wokumisa i-receiver yongxamiseko	AC125V-1A/DC30V-2A
Ummkeli enze uluhlu lomthwalo wemveliso	AC125V-1A/DC30V-2A
Uluhlu lokulayisha iqhosha lesiqhelo lomamkeli	DC24V/50mA
Uluhlu lomthwalo wemveliso ye-axis yomamkeli	DC24V/50mA
Uluhlu lomthwalo wokukhuliswa kommkeli	DC24V/50mA
Amandla othumelo lwetheminali ephathwa ngesandla	15dBm
Umamkeli ufumana ubuntununtunu	-100dBm
Iifrikhwensi zonxibelelwano ezingenazingcingo	433MHz frequency band
Umgama wonxibelelwano olungenazingcingo	Umqobo okhululekileyo umgama we 40 iimitha
Ubushushu bokusebenza	-25℃ < X < 55℃
Ukuphakama kwe-Anti ukuwa	1 (imitha)
Isiko leqhosha ubuninzi	2

4. Umsebenzi wemveliso

Amanqaku:

① Pulse encoder:
Cinezela kwaye ubambe iqhosha, gungxusa i-pulse encoder, ikhupha uphawu lwepulse,and control the movement ofthe machine axis.
② Vula iqhosha:
Cinezela naliphi na iqhosha lokuvula macala omabini, kwaye iiseti ezimbini zokwenza iziphumo ze-IO kumamkeli ziya kuqhuba. Khupha iqhosha lokuvula ukuze uqhawule uqhagamshelwano lwemveliso ye-IO; Kwaye ngaphambi kokutshintsha i-axis yokukhetha ukwandiswa kunye nokushukumisa isondo lesandla,iqhosha lokwenza kufuneka libanjwe phantsi ukuze lisebenze; This function can be cancelled through configuration software.

③ Izibane zesalathisi:
Ukukhanya kwicala lasekhohlo: amandla ekukhanyeni,ivili lesandla lisebenzisa i-axis ukukhetha CIMA kumbane wokuvula, kwaye oku kukhanya kuhlala kukhanyisiwe emva kombane;
Ukukhanya okuphakathi: isibane somqondiso esikhanyisayo xa usebenzisa nawuphi na umsebenzi wevili lesandla, kwaye ayikhanyi xa kungekho msebenzi;
Ukukhanya kwecala lasekunene: Ukukhanya kwe-voltage ephantsi, inqanaba lebhetri eliphantsi,oku kuyadanyaza okanye kuhlala kuvuliwe, battery needs to be replaced.

④ Iqhosha lokumisa ixesha likaxakeka:
Cinezela iqhosha lokumisa elingxamisekileyo, kunye neeseti ezimbini zexesha lokumisa imeko ezingxamisekileyo kwi-Ofisi kamamkeli ziya kuncitshiswa, and all functions of the handwheel will be invalid.

⑤ Ukutshintsha kokukhulisa:
Cinezela kwaye ubambe iqhosha lokuvula ukutshintsha iswitshi yokwandisa, which can switch the magnification controlled by the handwheel.

⑥ Ukutshintshela ukhetho lwe-axis (Ukutshintsha kwamandla):
Cinezela kwaye ubambe iqhosha lokuvula ukutshintsha iqhosha lokukhetha i-axis, enokutshintsha i-axis yentshukumo elawulwa yi-handwheel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Iqhosha lesiqhelo:
Amaqhosha amabini angokwezifiso, each corresponding to an IO output point on the receiver.

5. Umzobo wemveliso yemveliso

6. Isikhokelo semveliso
6.1 Amanyathelo ofakelo lwemveliso

1. Faka umamkeli kwiKhabhinethi yombane ngokusebenzisa i-buckle ngasemva, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Bhekisa kumzobo wethu we-wiring ye-wiring kwaye uthelekise ngezixhobo zakho zendawo. Connect the equipment to the receiver via cables.
3.Emva kokuba umamkeli elungiswe kakuhle, I-eriyali exhotywe ngumsebenzi kufuneka iqhagamshelwe, kwaye isiphelo sangaphandle se-antenna kufuneka sifakwe okanye sibekwe ngaphandle kwekhabhinethi yombane. Kucetyiswa ukuba uyibeke eqongeni kwiKhabhinethi yoMbane yeyona nto ibalulekileyo. Akuvumelekanga ukushiya i-antenna ingaxhunywanga okanye uyibeke ngaphakathi kwekhabhinethi yombane, as this may result in the signal being unusable.
4. Ekugqibeleni, vula isitshixo samandla sevili lesandla, and you can operate the machine remotely using the handwheel.

6.2 Ubungakanani bofakelo lokufaka

6.3 Umzobo wereferensi ye-Wiring Wiring

7. Imiyalelo yeMveliso yeMveliso
1. Amandla kumatshini kunye nomamkeli. Isalathisi sokusebenza somamkeli siyadanyaza. Faka ibhetri kwivili lesandla lombane elingenazingcingo, khusela isiciko sebhetri, kwaye
vula isitshixo samandla sevili lesandla sombane esingenazingcingo. The handwheel’s battery level indicator light is on.
2. Khetha i-axis elungelelanisiweyo: Cinezela kwaye ubambe iqhosha, tshintsha iqhosha lokukhetha i-axis, and select the axis you want to operate.
3. Khetha amandla: Cinezela kwaye ubambe iqhosha, tshintsha iswitshi yokwandisa,and select the desired magnification level.
4. I-Axis eshukumayo: Cinezela kwaye ubambe iqhosha, Khetha utshintsho lokukhetha i-Axis, Khetha utshintsho olwenziyo, kwaye ujikelezise i-pulse encoder. Jikelezisa ngokwewotshi ukuhambisa i
positive axis and counterclockwise to move the negative axis.
5. Cinezela kwaye ubambe nayiphi na iqhosha lesiqhelo, kwaye iqhosha elihambelanayo IO imveliso yomamkeli iya kuvulwa. Khupha iqhosha, and the output will be turned off.
6. Cinezela iqhosha lokumisa elingxamisekileyo, I-temotivemes yokumisa i-IO ikhuphele i-mamkeli iya kuncitshiswa, Umsebenzi we-handheel uya kukhubazeka,Khupha iqhosha lokumisa ngexesha likaxakeka, Indawo yokumisa imeko ye-IO ikhuphe ivaliwe, and the handwheel function will be restored.
7. Ukuba isandla sesandla asisebenzi kangangexesha elithile, iyakungena ngokuzenzekelayo imo yokulala ukunciphisa ukusetyenziswa kwamandla. Xa isetyenziswa kwakhona, the handwheel can be activated by pressing the enable button.
8. Ukuba isandla sisetyenziswe ixesha elide, kucetyiswa ukuba utshintshe i-handwheel shaft kwindawo OFF, Cima igunya lesandla, and extend the battery life.

8. Inkcazo yemodeli yemveliso

① :I-ZTWGP imele isimbo senkangeleko
②：Iparamest parameter parameter:
01: Ibonisa ukuba isignali ye-pulse output ngu-A, B; Pulse voltage 5v; pulse quantity 100PPR.
02：Ibonisa ukuba iimpawu ze-pulse output ngu-A kunye no-B; I-Pulse voltage 12V; pulse quantity 100PPR.
03：Ibonisa ukuba iimpawu ze-pulse output yi-A, B, A -, B -; Pulse voltage 5v; pulse quantity 100PPR.
04：Ibonisa inqanaba lesekethe eliphantsi le-NPN, Nge-pulsemesmes iziphumo ze-A kunye ne-b;The number of pulses is 100PPR.
05：Ibonisa umgangatho wePNP ephezulu yePNP, Nge-pulsemesmes iziphumo ze-A kunye ne-b; The number of pulses is 100PPR.
③：Ukumela inani lokutshintsha kwe-axis yokukhetha, 2 imele 2 axes.
④：Imele uhlobo lwesiginali yokukhetha i-axis, Inqaku le-Point-to-contal, and B represents encoded output signal.
⑤：Imele uhlobo lwesignali yokutshintsha kophindaphindo, Inqaku le-Point-to-contal, and B represents encoded output signal.
⑥：Imele inani lamaqhosha esiko, 2 imele 2 custom buttons.
⑦：Imele unikezelo lwamandla kwi-handwheel yesixokelelwano, kwaye 05 represents 5V power supply.
⑧：L imele ikholamu yasekhohlo (isibambi semela sasekhohlo), kunye no-R umele umhlathi wasekunene (isibambi semela sasekunene).

9.Isisombululo sokungasebenzi kakuhle kweMveliso

1.Intshayelelo Intshayelelo

I-wireless ngesandla i-elektroniki isetyenziselwa ukukhokelwa ngesandla, ukubeka, Ulungelelwaniso lwesixhobo,kunye neminye imisebenzi kwizixhobo ze-CNC zoMatshini. Le mveliso yamkela itekhnoloji yokuhambisa i-wireless, Ukuphelisa unxibelelwano lwe-wire ye-Wire yeNtloko, Ukunciphisa ukusilela kwezixhobo ezibangelwa ziintambo, ukuphelisa ubugwenxa bokutsalwa kwentambo kunye namabala e-oyile, nokwenza umsebenzi ulunge ngakumbi. Le modeli ye-handwheel ye-elektroniki engenangcingo livili lesandla elizinikeleyo lenkqubo yeFanuc. Ulungelelwaniso lwenkqubo yeFanuc luboniswa ngexesha lokwenyani kwiscreen sevili ngesandla ngeIO-LINK protocol, kunye nokukhethwa kwe-axis,ukuqina, kunye neempawu zeqhosha ziqhagamshelwe ngokuthe ngqo kwinkqubo nge-IO-LINK protocol, reducing wiring.

2. Iimpawu zeMveliso
1. Itekhnoloji yoNxibelelwano lwe-433mhz, umgama wokusebenza ngaphandle kwentambo 40 iimitha;
2. Ukwamkela ukusebenza ngokuzenzekelayo, sebenzisa 32 iiseti zabalawuli abakude abangenazingcingo ngaxeshanye ngaphandle kokuchaphazela omnye nomnye;
3. Inkxaso yeXesha leMiselweyo, Guqula iziphumo zomqondiso, iqhagamshelwe kwisixokelelwano ngocingo lwe-IO;
4. Inkxaso 4 amaqhosha esiqhelo, Guqula isiginali, Imveliso yemveliso kwinkqubo nge-IO-Comit Protocol;
5. Inkxaso ekhawulezayo yokuhamba ngokukhawuleza + kunye neqhosha -, Cinezela kwaye ubambe iqhosha ukuba libuyisele i-handheel ukuba isuse umatshini;
6. Inkxaso ye-6-Axis, Guqula isiginali, Imveliso yemveliso kwinkqubo nge-IO-Comit Protocol;
7. Inkxaso 1X,10x, 100X ulawulo . Inkxaso yokutshintsha uphawu lwe-l0, kunye neziphumo zemiqondiso kwinkqubo nge-IO-LINK protocol;
8. Inkxaso yenza umsebenzi weqhosha, qhagamshela kwinkqubo nge-IO yocingo, kunye ne-encoder yolawulo yenza ngexesha elinye;
9. Inkxaso ePulse ePulser, 100 imibhobho/isangqa, ukufikelela kwisixokelelwano se-MPG handwheel ujongano ngokukhupha isignali ye-encoding ye-AB;

3.IiNkcazo zeMveliso

4.Iimpawu zeMveliso

Amanqaku:
Iqhosha lokuyeka:
Cinezela iqhosha lokumisa elingxamisekileyo, iziphumo ezimbini zikaxakeka zokumisa i-IO kumamkeli ziqhawulwe, kwaye yonke imisebenzi yamavili esandla ayisebenzi.Emva kokuba umiselo olungxamisekileyo lukhutshiwe, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Umboniso weskrini:

③Amaqhosha eSiko:
4 amaqhosha esiqhelo, iqhosha ngalinye lihambelana nenqaku lemveliso ye-IO kumamkeli, iqhagamshelwe kwinkqubo nge-IOLINK. Ngokubanzi, the ~ button is set as a high-speed button.
④Iswitshi yokukhetha i-axis:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Amaqhosha amfutshane:
Cinezela iqhosha elinqumlayo elithi “+ ”ukuhambisa umatshini phambili, kwaye ucinezele iqhosha elinqumlayo "-" ukuhambisa umatshini kakubi. This can replace turning the hand wheel to move the machine.
⑥Iqhosha lokuvula:
Cinezela kwaye ubambe naliphi na elinye lamaqhosha okwenza kumacala omabini kwaye ushukumise ikhowudi ye-pulse ukuze isebenze. Kwaye amaqela amabini okuvumela iziphumo ze-IO kumamkeli zivuliwe. Release the enable button and the enable IO output is disconnected.
⑦ Ukutshintsha komlinganiselo:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Cinezela kwaye ubambe iqhosha le-Qina kwaye uhlunguze i-pulse encoder ukuba athumele ipulse
signal to control the movement of the machine axis.
⑨Ukutshintsha amandla:
Handwheel power button.

5.I-Intermes yeMveliso

6.Isikhokelo semveliso

6.1 Amanyathelo ofakelo lwemveliso

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Jonga umzobo wethu we-wiring, Thelekisa nesixhobo sakho sendawo, kwaye uqhagamshele
the equipment to the receiver via cables.
3. Emva kokuba umntu omkelweyo, I-eriyali exhotywe ngumsebenzi kufuneka iqhagamshelwe,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Kucetyiswa ukuba uyibeke eqongeni kwiKhabhinethi yoMbane yeyona nto ibalulekileyo. Yona
Akuvumelekanga ukushiya i-eriyali ingaqhagamshelwanga okanye ubeke i-eriyali ngaphakathi kwekhabhathi yombane,
which may cause the signal to be unusable.
4.Ekugqibeleni, Vula i-Handweel Ansourt Shintsha kwaye ungasebenza umatshini
handwheel remote control.

6.2 Ubungakanani bofakelo lokufaka

6.3 Umzobo wereferensi ye-Wiring Wiring

7. Ulungiso kunye noKhathalelo

1. Nceda uyisebenzise kwindawo eyomileyo enobushushu obuqhelekileyo kunye noxinzelelo lokwandisa
ubomi benkonzo;
2. Nceda uphephe ukusisebenzisa kwiimeko ezingaqhelekanga ezifana nemvula namaqamza amanzi ukuze andise
Ubomi benkonzo;
3. Nceda ugcine inkangeleko ye-handwheel icocekile ukwandisa ubomi benkonzo;
4. Nceda uphephe ukuntywila, ukuwa, ukugoba, njl. ukuthintela umonakalo kwiindawo ezichanekileyo
ngaphakathi kwivili lesandla okanye kubangele iimpazamo ezichanekileyo;
5. Ukuba ayisetyenziswanga ixesha elide, Nceda ugcine isandheel kwindawo ecocekileyo nekhuselekileyo;
6. Pay attention to moisture and shock during storage and transportation.

8. Ulwazi loKhuseleko

1. Nceda ufunde imiyalelo ngononophelo ngaphambi kokusebenzisa. I-on-rionsals ayivunyelwanga
operating.
2. Nceda uyibuyisele ibhetri ngexesha xa ibhetri iphantsi kakhulu ukunqanda iimpazamo ezibangelwe
insufficient power causing the handwheel to be unable to operate.
3. Ukuba ukulungiswa kuyafuneka, Nceda unxibelelane noMvelisi. Ukuba umonakalo ubangelwa kukuzilungisa,
the manufacturer will not provide warranty.

1.Intshayelelo Intshayelelo

I-wireless ngesandla i-elektroniki isetyenziselwa ukukhokelwa ngesandla, ukubeka, Ukuseta isixhobo kunye
Eminye imisebenzi yezixhobo ze-CNC zoMatshini. Le mveliso yamkela itekhnoloji yokuhambisa i-wireless,
Ukuphelisa unxibelelwano lwe-wire ye-Wire yeNtloko, Ukunciphisa ukusilela kwezixhobo ezibangelwa ziintambo,
Ukuphelisa izinto ezingalunganga zentambo, amabala e-oyile, njl., kwaye ilungele kakhulu
sebenza. Isetyenziswe ngokubanzi kwizixhobo ze-CNC zoomatshini ezifana namaziko emitshini kamatshini, genry
Iilebhu ezithe nkqo, Oomatshini bokulungisa oomatshini bokulungisa, kwaye inokuhlengahlengiswa kwi-CNC eyahlukeneyo
Iinkqubo kwintengiso, ezinjenge-cumens, Mictsfishi, Fan, I-Syntec kunye nenye inkqubo ye-CNC
brands.

2.Iimpawu zeMveliso

1. Itekhnoloji yoNxibelelwano lwe-433mhz, umgama wokusebenza ngaphandle kwentambo 80 iimitha;
2. Ukwamkela ukusebenza ngokuzenzekelayo, sebenzisa 32 Iiseti ze-wireless wireless kude
ixesha elifanayo ngaphandle kokuchaphazela omnye komnye;
3. Inkxaso yeXesha leMiselweyo, kwaye emva kokuba isandla sicinyiwe, indawo yexesha likaxakeka
Iqhosha lisasebenza;
4. Inkxaso 6 amaqhosha esiqhelo, Guqula iziphumo zomqondiso;
5. Inkxaso ye-6-Axis, 7-12 Ulawulo lwe-Axis lunokwenziwa ngokwezifiso;
6. Ixhasa i-1x,10X, 100X Ulawulo kwaye lunokuba yi-1000x;
7. Ixhasa umsebenzi weqhosha, Iziphumo zokutshintsha i-l0 spials. ukhetho lwe-axis,ubudlelwane
kunye ne-ender.;
8. Inkxaso yokhetho lwe-Axis kunye nokukhetha isikhunta;
9. Inkxaso yohlobo lwenkxaso, 5I-V-2A Charticetion, yakhiwe-yebhetri yebhetri
14500/1100mAh.

3.Imveliso yemveliso

4.Umsebenzi wemveliso

Amanqaku：
Iqhosha lokuyeka：
Xa iqhosha lokumisa ngexesha likaxakeka licinezelwe, I-temmages mide yexesha likaxakeka
Umamkeli uyanqanyulwa, kwaye yonke imisebenzi ye-handheheel ayisebenzi. Xa imeko kaxakeka
yeka ikhutshiwe, indawo yokumisa imeko ye-IO ikhuphele kwi-mamkeli, kwaye wonke umntu ophendweyo
Imisebenzi ibuyiselwe; kwaye emva kokuba isandla sicinyiwe, indawo yokumisa imeko ye-IO Imveliso
of the receiver is still valid when the emergency stop button is pressed.

Iqhosha eliqinisekisiweyo:
Cinezela nayiphi na enye ye-thewow enika amaqhosha kumacala omabini, kunye namaqela amabini enza ukuba i-IO
Iziphumo ezivela kumvali ziya kuvulwa. Khupha iqhosha le-ECORK kunye ne-IO
Iziphumo ziya kucinywa. Ukwengeza, Kuya kufuneka ucinezele kwaye ubambe iqhosha le-Quonet ngaphambili
Ukutshintshela umlinganiso wokukhetha i-Axis kwaye ungcungcutheke ngesandla. Lo msebenzi unokuba
canceled through the configuration software.
Ukutshintshela (Ukutshintsha kwamandla):
Cinezela kwaye ubambe iqhosha le-Qina kwaye uguqule i-Axis Ukukhetha ukutshintshela kwi
I-Axis eshukumayo ilawulwa ngumboniso wesandla. Tshintshela le ntetho ukusuka kwi-axis kwaye
turn on the handwheel power.

④pulse encoder:
Cinezela kwaye ubambe iqhosha le-Qina kwaye uhlunguze i-pulse encoder ukuba athumele ipulse
signal to control the movement of the machine axis.

Isalathisi se-⑤battile:
Isondo lamavili amavili, Konke ukukhanya kuthetha amandla apheleleyo, Konke ukuphezulu kuthetha ukuba ayikho
ivuliwe okanye ayinamandla, I-rid yokuqala ye-grid, ibonisa ukuba amandla aphantsi kakhulu,
please charge in time.
Izibane zesibane:
Ukuba ukukhanya kwesibonakaliso kuqhubeke, Kuthetha isaphetha esiqhutywa kwaye umqondiso ukho
eqhelekileyo; Ukuba ukukhanya komqondiso kucinyiwe, Kuthetha ukuba akukho msebenzi, okanye iyasebenza kodwa
the wireless signal is not connected.

5.I-Intermes yeMveliso

6.Isikhokelo semveliso

6.1 Amanyathelo ofakelo lwemveliso
1. Faka umamkeli kwiKhabhinethi yoMbane usebenzisa iiklip ngasemva, okanye uyifaka ngaphakathi
the electrical cabinet using the screw holes at the four corners of the receiver.
2.Jonga umzobo wethu we-wiring, Thelekisa nesixhobo sakho sendawo, kwaye uqhagamshele
the equipment to the receiver via cables.
3.Emva kokuba umntu omkelweyo, I-eriyali exhotywe ngumsebenzi kufuneka iqhagamshelwe,
Kwaye isiphelo sangaphandle se-eriyali kufuneka sifakwe okanye sibekwe ngaphandle kweKhabhinethi yoMbane. Yona
Kucetyiswa ukuba uyibeke eqongeni kwiKhabhinethi yoMbane yeyona nto ibalulekileyo. Yi
inqatshelwe ukuba ishiye i-eriyali engapheli okanye ibeka i-eriyali ngaphakathi kwiKhabhinethi yombane,
which may cause the signal to be unusable.
4. Ekugqibeleni, Vula i-Handweel Ansourt Shintsha kwaye ungasebenza umatshini
handwheel remote control.

6.2 Ubungakanani bofakelo lokufaka

6.3 Umzobo wereferensi ye-Wiring Wiring

7.Imiyalelo yeMveliso yeMveliso
1. Umatshini uxhotyisiwe, Umamkeli unamandla, Isalathisi sokuSebekanisi
ukukhanya ukukhanya, I-wireless ngesandla nge-elektroniki ifakwe kwibhetri, isigqubuthelo sebhetri
ifakwe, I-wireless ye-Wireless Swipy Switch ivuliwe, kwaye i
Ukukhanya kwesandla sesandla sivuliwe;
2. Khetha i-axis elungelelanisiweyo: Cinezela kwaye ubambe iqhosha, Guqula ukhetho lwe-Axis
tshintsha, kwaye ukhethe i-axis ofuna ukusebenza kuyo;
3. Khetha amandla: Cinezela kwaye ubambe iqhosha, Guqula utshintsho olwenziyo,
kwaye ukhethe inqanaba lokukhulisa olifunayo;
4. I-Axis eshukumayo: Cinezela kwaye ubambe iqhosha, Khetha utshintsho lokukhetha i-Axis, khetha
Isitshisi sokutshintsha, kwaye ke jikeleza i-pulse ye-pulse ukujikeleza i-axis eshukumayo
Iwotshi kunye ne-Axis engalunganga;
5. Cinezela kwaye ubambe nayiphi na iqhosha lesiqhelo, kunye neqhosha elihambelanayo le
Umamkeli uya kuvulwa. Khupha iqhosha ukucima iziphumo;
6. Cinezela iqhosha lokumisa elingxamisekileyo, I-temoting gemes ehambelana ne-io ikhutshiwe
Umamkeli uyanqunyanyiswa, Umsebenzi we-handheel ukhubazekile, khupha indawo yokumisa ngexesha likaxakeka
iqhosha, Indawo yokumisa imeko ye-IO ivaliwe, kwaye umsebenzi wesandla ubuyiselwe;
7. Ukuba isandla sesandla asisebenzi kangangexesha elithile, Iya kungena ngokuzenzekelayo
Imo yokunciphisa ukusetyenziswa kwamandla. Xa isetyenziswa kwakhona, Isandla sinokubakho
ivulwe ngokucinezela iqhosha;
8. Ukuba isandla sisetyenziswe ixesha elide,Kucetyiswa ukuba uguqule isiphene
shaft ukuya kwindawo, Cima igunya lesandla, and extend the battery life.

8.Inkcazo yemodeli yemveliso

① ：I-DWGP imele isitayile sokubonakala

② ：Iparamest parameter parameter:
01: Ibonisa ukuba imiqondiso yokukhupha i-pulse yile kwaye b, kwaye i-volt yepulse i-5V; Pulse
Ubungakanani be-100ppr;
02: Ibonisa ukuba imiqondiso yokukhupha i-pulse yile kwaye b, kwaye i-volt yepulses yi-12V; Pulse
ubungakanani be-25ppr;
03: Ibonisa ukuba uphawu lwe-pulsement yi-b、A-、B-； Pulse voltage 5v; Pulse quantity 1
00I-prp;
04: Ibonisa inqanaba lesekethe eliphantsi le-NPN, Nge-pulsemesmes iziphumo ze-A kunye ne-b; i
Inani leepulses yi-100PPRR;05: Ibonisa umgangatho wePNP ephezulu yePNP, I-pulsement imiqondiso
ngu-b; I-pulse ubungakanani yi-100PPRR;
③ : imele inani lokukhetha i-axis, 6 imele 6 I-Axis, 7 imele 7 axis.
④ : imele uhlobo loKhetho lokuKhetha okukhethiweyo kwi-Axis, Inqaku le-Point-to-contal,
I-B imele umqondiso wemveliso;

⑤ : imele uhlobo lomqondiso wokuguqula isiphazamiso,
Inqaku le-Point-to-contal, I-B imele umqondiso wemveliso;
⑥ : imele inani lamaqhosha esiqhelo, 6 imele 6 amaqhosha esiqhelo;
⑦ : imele ukubonelelwa kwaMandla kwiNkqubo yesandla sesandla, 05 imele ukuhanjiswa kwamandla kwi-5V,
kwaye 24 represents 24V power supply.

9.Impembelelo kwiNgqondo

10. Ulungiso kunye noKhathalelo

1. Nceda uyisebenzise kwindawo eyomileyo kubushushu begumbi kunye noxinzelelo ukwandisa ubomi benkonzo;
2. Nceda uphephe ukusebenzisa kwiindawo ezingaqhelekanga ezinjengemvula kunye neebhubhu zamanzi ukwandisa ubomi beenkonzo;
3. Nceda ugcine imbonakalo yesandla icocekile ukwandisa ubomi benkonzo;
4. Nceda uphephe ukuntywila, ukuwa, ukugoba, njl. Ukuthintela ukonakaliswa kwento echanekileyo ngaphakathi
Isandla sesandla okanye iimpazamo zokuchaneka;
5. Ukuba ayisetyenziswanga ixesha elide, Nceda ugcine isandheel kwindawo ecocekileyo nekhuselekileyo;
6.Ngexesha lokugcina kunye nokuhamba, attention should be paid to moisture and shock resistance.

11.Ulwazi ngoKhuseleko

1. Nceda ufunde imiyalelo ngononophelo ngaphambi kokusebenzisa kwaye kuthintele oochwephesha ekusebenzeni;
2. Xa inqanaba lebhetri liphantsi kakhulu, Nceda uyihlawule ngexesha lokuphepha iimpazamo ezibangelwa yinganelanga
Ibhetri kunye nokungakwazi ukusebenza ngesandla;

3. Ukuba ukulungiswa kuyafuneka, Nceda unxibelelane noMvelisi. Ukuba umonakalo ubangelwa kukuzilungisa, the manufacturer will not provide warranty.

Imodeli：I-ATWGP-12

Inkqubo yokutshintsha: Zonke iinkqubo ze-CNC ezinentambo yesandla

Le mveliso ngumvelisi wencwadana yemifanekiso esetyenziswa izixhobo ze-CNC. Kuphela kusetyenziswa amacandelo anjengezixhobo ze-CNC zoMatshini, I-cnc lathes, Amaziko oMatshini,I-CNC itshonile kunye noomatshini bokugaya. Le mveliso isebenzisa i-wirelessTologyloightnology, Ukuphelisa isidingo sonxibelelwano lwe-cire yemveli, Ukuncitshiswa kokusilela okubangelwa ziintambo, Ukuphelisa intambo, ioyile kunye nolunye ungcoliseko, nokwenza umsebenzi ulunge ngakumbi. Iphakheji yemveliso ibandakanya i-Mava kunye ne-elektroniki ye-elektroniki. Umamkeli uqhagamshelwe kwizixhobo ze-CCC ngentambo yenethiwekhi, kunye ne-elektroniki ngesandla (I-Pulse Pulse) iqhagamshelwe kwaye idluliselwe kumhlatho ngetekhnoloji yokuhambisa ngaphandle kwamacingo. Umqhubi ubambe isandla kwaye angayisusa imiqobo yonxibelelwano yentambo yasentwasahlobo kwaye ushukume ngokukhululekileyo. I-Guntry-Mintry ye-Guntry, I-cnc lathes, Izixhobo zokuhamba, Ukusika kunye nezinye iinkqubo, it brings great convenience and improves work efficiency.

Ixhasa ii-rander zenkqubo ezahlukeneyo ezinjengentsholongwane, Mictsfishi, Fan, Taiwanxindai, Baoyuan, Fagor, Huzhong cnc, I-Guangzhou cnc, and otherCNC systemsthat support handwheel interfaces.

1. Sebenzisa i-433mhz ye-wireless will, Umgama osebenza ngaphandle kwentambo 40 iimitha;
2. Ukwamkela umsebenzi oqhubekayo ngokuzenzekelayo kunye nokusetyenziswa 32 iiseti zesandla esingenazingcingo ngaxeshanye ngaphandle kokuchaphazela omnye komnye;
3. Ixhasa iqhosha lokumisa elingxamisekileyo kwaye 3 Ukutshintsha kweqhosha lesiko;
4. Ixhasa ukhetho lwe-Axis ezininzi ze-6-Axis, 7-I-Axis, 8-I-Axis, 9-I-Axis, 10-I-Axis kunye ne-12-Axis, Ngezantya ezi-3 kunye ne-4 yesantya sesantya.axis kunye nokutshintsha kobungakanani benkxaso yeentlobo ezahlukeneyo zomqondiso ezifana nokufaka iikhowudi, inqaku lendawo, Ikhowudi engwevu, njl.;
5. Ixhasa i-5V ye-5V yohlukaniso, 24V Pulse uphawu kunye nezinye iintlobo zepulse;
6. Uyilo loMsebenzi oPhantsi, 2 Iibhetri zinokusetyenziselwa ngaphezulu kwe 1 inyanga;
7. Ixhasa i-antenna yangaphandle, Ilungele indawo yolawulo lwezixhobo ezahlukeneyo zoomatshini, Ukuqinisekisa ukuzinza kwesibonakaliso;

Phawula:
1. Isalathiso sesalathi:
Ukukhanya kwesibonakaliso (khohlo): Ukukhanya kwesibonakaliso kuhlala kuhleli xa i-handhelis isebenza, kwaye ayikhanyisi xa ingasebenzi;
Ukukhanya kwe-voltage ephantsi (kunene): Xa amandla ebhetri esezantsi kakhulu,Ukukhanya kwe-alam kukhala okanye ukuhlala kwi;
2. Yenza iqhosha:
Emva kokucinezela kwaye ubambe iqhosha le-ECONA, Ukhetho lwe-Axis kunye neempawu zokukhulisa zisebenze, Imveliso yePulse Deder isebenza;
3. Iqhosha lesikolo:
Iqhosha ngaphandle komsebenzi onokuthi ulawule iziphumo ezihambelana nomsebenzi;

Com1: I-terminal eqhelekileyo yokhetho lokhetho lwe-Axis Ukukhuphela; inokuqhagamshelwa kwi-0-24V isibonakaliso sikawonke-wonke
Com2: Isiphelo esiqhelekileyo se 3 Iziphumo zeqhosha lesikolo;

*Ukukhetha i-Axis kunye nokukhula kunokukhethwa ngesoftware, ukufaka iikhowudi okanye inqaku lendawo, Nceda uqwalasele abasebenzi ngeenkcukacha

The final interpretation right of this product belongs to our company.

1.Ukwaziswa kolawulo olukude

A.Vula comipostiinyani
I-NEEPTS INDLELA YOKUZIPHATHA NGOKUQINISEKILEYO I-EREDIAL SIBONELINGINS I-EREDIEL ye-elektroniki inamacandelo amabini: Ngomkhethe we-elektroniki + umamkeli;

b.Charactestics

*6 amaqhosha esiko anokulawula 6 tshintsha iziphumo;
*Isikrini esibonisiweyo sibonisa irejista ehambelana ne-PLC yexabiso ngexesha lokwenyani, and supports 6-axis display of real-time coordinates.

2.Ifildi yesicelo

1) Isandla se-elektroniki siqhagamshelwe kwi-plc nge-Ethernet Amkeli

A.I-Handhesedeli idlulisela i-the fictone ngaphandle kwe-wireless, kwaye umamkeli ubhala izitshixo ngenkqubo ye-plc yenethiwekhi ye-DB; Umamkeli ufunda idatha ukuba iboniswe kwindawo echongiweyo ye-DB, kwaye emva koko ibuyise idatha kwiscreen handheel sibonisa isikrini. Umsebenzisi unokwenza ngokwezifiso idilesi yokufunda nokubhala indawo ye-DB kwi-handheel, so that the handwheel can read and write the data in the DB area of the PLC.

b. Inkxaso yamamkeli i-SIGEns S7 Iprotocol. Isebenza kwi-plc s7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

Kwimowudi yeseva, Umsebenzisi uqwalasela i-PLC yokufunda kwaye ubhale idilesi ngesoftware ye-WTS-ETS;Sebenzisa isixhobo sePlC uqhagamshelo. Emva koqwalaselo, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Isicelo esithile

Ukusetyenziswa okuthile kwesandla sesandla kunye ne-neemens plc s7-200:

a. Iqhosha elikwi-handweel lihambelana nexabiso lendawo ye-bool esekwe ngumsebenzisi kwi-plc. Ukuba iqhosha lesandla licinezelwe, Indawo ehambelana nayo inyani iyinyani, kwaye xa ikhutshwe, Bubuxoki, Idilesi yesiseko yendawo ye-bool inokusetwa kwi-handheel;

b. Isandla sinokufunda ixabiso lendawo ye-DB kwi-plc. I-Axis enye inayo 4 I-Byte yedatha yokubonisa, kwaye 6 I-axes inezinto zonke 24 i-byte. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Intshayelelo

5.Inkcazo yesiphelo sephepha kunye netafile yokufaka edolophini

6.Ubungakanani bembonakalo

Inkqubo yokutshintsha: Zonke iinkqubo ze-CNC ezinentambo yesandla

Le mveliso ngumvelisi wencwadana yemifanekiso esetyenziswa izixhobo ze-CNC. Kuphela kusetyenziswa amacandelo anjengezixhobo ze-CNC zoMatshini, I-cnc lathes, Amaziko oMatshini,I-CNC itshonile kunye noomatshini bokugaya. Le mveliso isebenzisa i-wirelessTologyloightnology, Ukuphelisa isidingo sonxibelelwano lwe-cire yemveli, Ukuncitshiswa kokusilela okubangelwa ziintambo, Ukuphelisa intambo, ioyile kunye nolunye ungcoliseko, nokwenza umsebenzi ulunge ngakumbi. Iphakheji yemveliso ibandakanya i-Mava kunye ne-elektroniki ye-elektroniki. Umamkeli uqhagamshelwe kwizixhobo ze-CCC ngentambo yenethiwekhi, kunye ne-elektroniki ngesandla (I-Pulse Pulse) iqhagamshelwe kwaye idluliselwe kumhlatho ngetekhnoloji yokuhambisa ngaphandle kwamacingo. Umqhubi ubambe isandla kwaye angayisusa imiqobo yonxibelelwano yentambo yasentwasahlobo kwaye ushukume ngokukhululekileyo. I-Guntry-Mintry ye-Guntry, I-cnc lathes, Izixhobo zokuhamba, Ukusika kunye nezinye iinkqubo, it brings great convenience and improves work efficiency.

Ixhasa ii-rander zenkqubo ezahlukeneyo ezinjengentsholongwane, Mictsfishi, Fan, Taiwanxindai, Baoyuan, Fagor, Huzhong cnc, I-Guangzhou cnc, and otherCNC systemsthat support handwheel interfaces.

1. Sebenzisa i-433mhz ye-wireless will, Umgama osebenza ngaphandle kwentambo 40 iimitha;
2. Ukwamkela umsebenzi oqhubekayo ngokuzenzekelayo kunye nokusetyenziswa 32 iiseti zesandla esingenazingcingo ngaxeshanye ngaphandle kokuchaphazela omnye komnye;
3. Ixhasa iqhosha lokumisa elingxamisekileyo kwaye 3 Ukutshintsha kweqhosha lesiko;
4. Ixhasa ukhetho lwe-Axis ezininzi ze-6-Axis, 7-I-Axis, 8-I-Axis, 9-I-Axis, 10-I-Axis kunye ne-12-Axis, Ngezantya ezi-3 kunye ne-4 yesantya sesantya.axis kunye nokutshintsha kobungakanani benkxaso yeentlobo ezahlukeneyo zomqondiso ezifana nokufaka iikhowudi, inqaku lendawo, Ikhowudi engwevu, njl.;
5. Ixhasa i-5V ye-5V yohlukaniso, 24V Pulse uphawu kunye nezinye iintlobo zepulse;
6. Uyilo loMsebenzi oPhantsi, 2 Iibhetri zinokusetyenziselwa ngaphezulu kwe 1 inyanga;
7. Ixhasa i-antenna yangaphandle, Ilungele indawo yolawulo lwezixhobo ezahlukeneyo zoomatshini, Ukuqinisekisa ukuzinza kwesibonakaliso;

Phawula:
1. Isalathiso sesalathi:
Ukukhanya kwesibonakaliso (khohlo): Ukukhanya kwesibonakaliso kuhlala kuhleli xa i-handhelis isebenza, kwaye ayikhanyisi xa ingasebenzi;
Ukukhanya kwe-voltage ephantsi (kunene): Xa amandla ebhetri esezantsi kakhulu,Ukukhanya kwe-alam kukhala okanye ukuhlala kwi;
2. Yenza iqhosha:
Emva kokucinezela kwaye ubambe iqhosha le-ECONA, Ukhetho lwe-Axis kunye neempawu zokukhulisa zisebenze, Imveliso yePulse Deder isebenza;
3. Iqhosha lesikolo:
Iqhosha ngaphandle komsebenzi onokuthi ulawule iziphumo ezihambelana nomsebenzi;

Com1: I-terminal eqhelekileyo yokhetho lokhetho lwe-Axis Ukukhuphela; inokuqhagamshelwa kwi-0-24V isibonakaliso sikawonke-wonke
Com2: Isiphelo esiqhelekileyo se 3 Iziphumo zeqhosha lesikolo;

*Ukukhetha i-Axis kunye nokukhula kunokukhethwa ngesoftware, ukufaka iikhowudi okanye inqaku lendawo, Nceda uqwalasele abasebenzi ngeenkcukacha

The final interpretation right of this product belongs to our company.