Isicelo esithile seNkume – Itekhnoloji ye-WXHC https://www.wixhc.cn Inkokeli yeShishini Wed, 05 Nov 2025 06:21:59 +0000 xh hourly 1 https://wordpress.org/?v=6.8.5 Incwadana yemiyalelo yesandla se-Woman https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Intshayelelo Intshayelelo

I-Elektrone ye-elektroniki isetyenziselwa ukukhokelwa ngesandla, ukubeka, Ulungelelwaniso lwesixhobo, kunye neminye imisebenzi kwizixhobo ze-CNC zoMatshini. Le modeli ye-elektroniki ye-elektroniki i-seemens i-seemens ebonakalayo. Isandla siqhagamshelwe kumntu we-X130 wenkqubo ye-NEEMEPS ngentambo yenethiwekhi, kwaye inkqubo yokulungelelaniswa kwenkqubo ifundwa kwaye iboniswe kwiscd yesikrini se-LCD yoNxibelelwano lweProtokholi ye-S7. Isandla sinokulawula ukukhetha kwenkqubo ye-Axis, ukuqina, amaqhosha, andother signals through communication.
2.Imveliso yeMveliso
1. Sebenzisa i-plug ye-plug ye-6-ombi yokuhamba, Ngobude bekhefu ye-handheel 10 meters.
2. Isikrini sesandla sinokubonisa ukulungelelanisa inkqubo yenkqubo, ulungelelwaniso lwendlela,Ireyithi yokondla, ukhetho lwe-axis, ukuqina, and other information.
3. Inkxaso yeXesha leMiselweyo, Guqula iziphumo zomqondiso, and the hand wheel shutdown emergency stop is still valid.
4. Inkxaso 6 amaqhosha esiqhelo, Guqula imiqondiso ye-io, and can output signals to the system through IO wiring or communication.
5. Inkxaso 6 okanye 8 Ulawulo lwe-axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. Inkxaso 3 okanye 4 amanqanaba olawulo lukhuni, with switch IO signals that can be output to the system through IO wiring or communication.
7. Inkxaso ePulse ePulser, 100 Ukuphosa / ukujika, can output signals to the system through AB pulse wiring.
8. Inkxaso yeS4 IProtokholi yeS7 IProtokholi yeS7 IProtokholi ye-828D, 840I-DSL, ONE and other model systems.

 

3. Imveliso yemveliso
Ukusebenza kwesandla esisebenzayo I-DC24V / 1A
I-voltage yombane wamandla I-DC24V / 1A
Uluhlu lwemveliso ye-IO I-DC24V
I-HEAD SPALE YOKUGQIBELA 10m
Ubude bokuphela kwentambo 1m
I-Cami Supere ye-Cable ye-Cable 3m
Iqondo lokusebenza -25℃<X<55℃
Ukuphakama okuchasene 1m
Ubungakanani beQela 6
Ubungakanani bemveliso 233*90.7*77.4(Mm)

4.Umsebenzi wemveliso

Phawula:
Iqhosha lokumisa elingxamisekileyo:
Cinezela iqhosha lokumisa elingxamisekileyo, kunye neeseti ezimbini zexesha lokumisa imeko ezingxamisekileyo kwi-Ofisi kamamkeli ziya kuncitshiswa, and all functions of the handwheel will be invalid.
Emva kokukhupha indawo yokumisa ngexesha likaxakeka, indawo yokumisa imeko ye-IO ikhuphele kwi-mamkeli, and all functions of the handwheel are restored.
Umboniso we-screen:

 

Plc: 0000 ibonisa ukuba intambo yenethiwekhi ayixhunyiwe, Plc: 1010 indicates that the network cable is successfully connected to the PLC system.
Plc: 1110 imele ukubhala ngempumelelo kwedatha yenkqubo ukuya kwi-handheel, Plc: 0001 represents successful connection to the computer.
Iqhosha lesiko:
6 amaqhosha esiqhelo, nganye ihambelana nendawo yokuphuma ye-IO kwi-mamkeli, also connected to the system through communication.
I-Axis Ukhetho lokuKhetha i-Axis:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Iqhosha le:
Cinezela kwaye ubambe iqhosha le-QINO kumacala omabini ukuvula i-pulseder encoder ngokuthoba. Kwaye la maqela mabini amkelayo anika i-IO ukhuphelo lokuziphatha, release the enable button to enable IO output to disconnect.
⑥ Ukutshintsha kwezinto:Isitshisi sokutshintsha sinokuvula isibane
controlled by the handwheel.
⑦ pulse encoder:
Cinezela kwaye ubambe iqhosha, gungxusa i-pulse encoder, ikhupha uphawu lwepulse, and control the movement of the machine axis.
⑧ Intambo ye-handheel:

Intambo exhuma i-handheel kwaye yamkele, iplagi yenqwelo moya, used for handwheel power supply and communication.

5. Umzobo wemveliso yemveliso

6. Isikhokelo semveliso
6.1 Amanyathelo ofakelo lwemveliso
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Bhekisa kumzobo wethu we-wiring ye-wiring kwaye uthelekise ngezixhobo zakho zendawo. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Emva kokulungisa umamkeli, Faka i-plug ye-plug kwisiseko se-handheel yokuvula iPaneli, kunye neplagi enye isiseko se-oced kwimbonakalo yesandla kwi-mamkeli. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Ubungakanani bofakelo lokufaka

6.3 Imilinganiselo yofakelo lweeplagi zenkonzo

6.4 Umzobo wereferensi ye-Wiring Wiring
7.Imiyalelo yeMveliso yeMveliso

1. Xa umamkeli exhotyiswa kunye nesalathisi sokusebenza ukukhanya kwevaliwe, Qhagamshela umamkeli kwikhompyuter ngentambo yenethiwekhi, Seta idilesi ye-IP eSisileyo yekhompyuter, kwaye usebenzise isoftware yoqwalaselo yenethiwekhi ukuseta iiparamitha zenethiwekhi yomsebenzi wesandla. Ngeendlela ezithile zokuseta, bhekisa kwi “I-LXWGP-ETS SIRD SIRDINHIEL SIDS”.

2.Emva kokuba umntu amkelwe, Inkqubo kufuneka isebenze inkqubo ye-plc. Nceda ujonge kwi “I-LXWGP-ETS I-NTS ye-Imemens yamanani” and PLC program routine materials for details.

3.Emva kokuba ugqibezele lesethingi yentla, Thatha umamkeli kwiKhabhinethi yoMbane woMatshini kwaye uyifake. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.Emva kokuba ugqibezele lesethingi yentla, Thatha umamkeli kwiKhabhinethi yoMbane woMatshini kwaye uyifake. Khupha intambo yenethiwekhi kwikhompyuter kwaye iqhube kwi-X ye-X yenkqubo yenkqubo. Connect the receiver power supply and pulse line.
5. Khetha ukhetho lwe-Axis: Switch the axis selection switch and select the axis you want to operate on.
6. Khetha amandla: Switch the magnification switch and select the magnification level you need.
7. I-Axis eshukumayo: Cinezela kwaye ubambe iqhosha, Khetha utshintsho lokukhetha i-Axis, Khetha utshintsho olwenziyo, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Cinezela kwaye ubambe nayiphi na iqhosha lesiko ukuvula iziphumo ze-IO iqhosha elihambelanayo kwi-mamkeli, and release the button to turn off the output.
9. Cinezela iqhosha lokumisa elingxamisekileyo, I-temotivemes yokumisa i-IO ikhuphele i-mamkeli iya kuncitshiswa, Umsebenzi we-handheel uya kukhubazeka, Khupha iqhosha lokumisa ngexesha likaxakeka, Indawo yokumisa imeko ye-IO ikhuphe ivaliwe, and the handwheel function will be restored.
8.Inkcazo yemodeli yemveliso

I-Lxwwgp imele isitayile sokungenisa, kunye nojongano lonxibelelwano
is an Ethernet interface.
② : Represents Siemens system specific.
③ : imele inani lokukhetha i-axis, imele i-axes, kwaye imele
axes.
④ : imele uhlobo lokukhetha i-axis kunye nokukhulisa isibonakaliso, Imele
I-Point-to-Contal, and B represents encoded output signal.

9.Ingxaki yokudubula

10.Isondlo
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Nceda uphephe ukuntywila, ukuwa, ukugoba, njl. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Ukuba ayisetyenziswanga ixesha elide, Nceda ugcine ngesandla kwindawo ecocekileyo nekhuselekileyo. Ukugcinwa nokugcinwa kunye nokuhamba, attention should be paid to moisture and shock resistance.
11. Ulwazi ngoKhuseleko

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Ukuba nayiphi na imeko engaqhelekanga yenzeka nge-handheel, Nceda uyeke ukuyisebenzisa kwangoko kwaye uyicofe ingxaki. Ngaphambi kokucocwa, Akuvumelekanga ukusebenzisa i-verweel engalunganga kwakhona ukuthintela iingozi zokhuseleko ezibangelwa ziimpazamo zesandla esingaziwayo;
3. Ukuba ukulungiswa kuyafuneka, Nceda unxibelelane noMvelisi. Ukuba umonakalo ubangelwa kukuzilungisa, Umenzi akazukubonelela ngewaranti

 

]]> I-Wirelef engenamsebenzi i-Wireless kude kwi-CNC ye-CNC https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Intshayelelo Intshayelelo

I-wireless contro ezinikeleyo ekude ye-CNC lathes ethe nkqo isetyenziselwa ukukhokelwa ngesandla, ukubeka, isixhobo sokucwangcisa, kunye neminye imisebenzi kwizixhobo zomatshini ezithe nkqo ze-CNC. Le mveliso yamkela itekhnoloji yokuhambisa i-wireless, ukuphelisa imfuneko yoqhagamshelwano lwemveli yasentlakohlaza, Ukunciphisa ukusilela kwezixhobo ezibangelwa ziintambo, kunye nokuphelisa izinto ezingeloncedo zokutsalwa kwentambo kunye namabala e-oyile, ukwenza umsebenzi ube lula ngakumbi. Isetyenziswa ngokubanzi kwiileyile ezahlukeneyo ezithe nkqo njenge CNC iileyile ezithe nkqo, iileyile ezithe nkqo ikholamu enye, kunye nekholamu ephindwe kabini yeelathe ezithe nkqo., ezinjenge-cumens,
Mictsfishi, Fan, and Syntec.

2. Imveliso yeMveliso

1. Ukwamkela 433 MHz iteknoloji yonxibelelwano engenazingcingo, ngomgama osebenza ngaphandle kwentambo 40 meters.
2.Ukwamkela i-automatic frequency hopping function kunye nokusetyenziswa 32 iiseti zabalawuli abakude abangenazingcingo ngaxeshanye, without affecting each other.
3. Inkxaso yeXesha leMiselweyo, switch IO signal output.
4. Inkxaso 2 amaqhosha ngokwezifiso, with switch-type IO signal output.
5. Inkxaso -2 axis control.
6. Supports 3-level magnification control.
7. Xhasa umsebenzi weqhosha lokuvula, enokuthi ikhuphe / icime imiqondiso ye-IO kunye nokulawula ukhetho lwe-axis, into yokuphindaphinda, kunye ne-ender.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Ixhasa i-pulse encoder, kunye neenkcukacha ze 100 pulses per revolution.
3. Imveliso yemveliso
I-voltage esebenzayo kunye ne-current ye-wireless remote
3V/14MA
Iinkcukacha zebhetri 2 AA iibhetri zealkaline, size 5
Uluhlu lwealam yombane ophantsi weremowuthi engenazingcingo < 2.3V
I-voltage yombane wamandla I-DC5V-24V/A
Uluhlu lomthwalo wokumisa i-receiver yongxamiseko AC125V-1A/DC30V-2A
Ummkeli enze uluhlu lomthwalo wemveliso
AC125V-1A/DC30V-2A
Uluhlu lokulayisha iqhosha lesiqhelo lomamkeli DC24V/50mA
Uluhlu lomthwalo wemveliso ye-axis yomamkeli DC24V/50mA
Uluhlu lomthwalo wokukhuliswa kommkeli DC24V/50mA
Amandla othumelo lwetheminali ephathwa ngesandla
15dBm
Umamkeli ufumana ubuntununtunu -100dBm
Iifrikhwensi zonxibelelwano ezingenazingcingo 433MHz frequency band
Umgama wonxibelelwano olungenazingcingo Umqobo okhululekileyo umgama we 40 iimitha
Ubushushu bokusebenza -25℃ < X < 55℃
Ukuphakama kwe-Anti ukuwa 1 (imitha)
Isiko leqhosha ubuninzi 2
4. Umsebenzi wemveliso



Amanqaku:

① Pulse encoder:
Cinezela kwaye ubambe iqhosha, gungxusa i-pulse encoder, ikhupha uphawu lwepulse,and control the movement ofthe machine axis.
② Vula iqhosha:
Cinezela naliphi na iqhosha lokuvula macala omabini, kwaye iiseti ezimbini zokwenza iziphumo ze-IO kumamkeli ziya kuqhuba. Khupha iqhosha lokuvula ukuze uqhawule uqhagamshelwano lwemveliso ye-IO; Kwaye ngaphambi kokutshintsha i-axis yokukhetha ukwandiswa kunye nokushukumisa isondo lesandla,iqhosha lokwenza kufuneka libanjwe phantsi ukuze lisebenze; This function can be cancelled through configuration software.

③ Izibane zesalathisi:
Ukukhanya kwicala lasekhohlo: amandla ekukhanyeni,ivili lesandla lisebenzisa i-axis ukukhetha CIMA kumbane wokuvula, kwaye oku kukhanya kuhlala kukhanyisiwe emva kombane;
Ukukhanya okuphakathi: isibane somqondiso esikhanyisayo xa usebenzisa nawuphi na umsebenzi wevili lesandla, kwaye ayikhanyi xa kungekho msebenzi;
Ukukhanya kwecala lasekunene: Ukukhanya kwe-voltage ephantsi, inqanaba lebhetri eliphantsi,oku kuyadanyaza okanye kuhlala kuvuliwe, battery needs to be replaced.

④ Iqhosha lokumisa ixesha likaxakeka:
Cinezela iqhosha lokumisa elingxamisekileyo, kunye neeseti ezimbini zexesha lokumisa imeko ezingxamisekileyo kwi-Ofisi kamamkeli ziya kuncitshiswa, and all functions of the handwheel will be invalid.

⑤ Ukutshintsha kokukhulisa:
Cinezela kwaye ubambe iqhosha lokuvula ukutshintsha iswitshi yokwandisa, which can switch the magnification controlled by the handwheel.

⑥ Ukutshintshela ukhetho lwe-axis (Ukutshintsha kwamandla):
Cinezela kwaye ubambe iqhosha lokuvula ukutshintsha iqhosha lokukhetha i-axis, enokutshintsha i-axis yentshukumo elawulwa yi-handwheel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Iqhosha lesiqhelo:
Amaqhosha amabini angokwezifiso, each corresponding to an IO output point on the receiver.

5. Umzobo wemveliso yemveliso

6. Isikhokelo semveliso
6.1 Amanyathelo ofakelo lwemveliso

1. Faka umamkeli kwiKhabhinethi yombane ngokusebenzisa i-buckle ngasemva, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Bhekisa kumzobo wethu we-wiring ye-wiring kwaye uthelekise ngezixhobo zakho zendawo. Connect the equipment to the receiver via cables.
3.Emva kokuba umamkeli elungiswe kakuhle, I-eriyali exhotywe ngumsebenzi kufuneka iqhagamshelwe, kwaye isiphelo sangaphandle se-antenna kufuneka sifakwe okanye sibekwe ngaphandle kwekhabhinethi yombane. Kucetyiswa ukuba uyibeke eqongeni kwiKhabhinethi yoMbane yeyona nto ibalulekileyo. Akuvumelekanga ukushiya i-antenna ingaxhunywanga okanye uyibeke ngaphakathi kwekhabhinethi yombane, as this may result in the signal being unusable.
4. Ekugqibeleni, vula isitshixo samandla sevili lesandla, and you can operate the machine remotely using the handwheel.

6.2 Ubungakanani bofakelo lokufaka

6.3 Umzobo wereferensi ye-Wiring Wiring

7. Imiyalelo yeMveliso yeMveliso
1. Amandla kumatshini kunye nomamkeli. Isalathisi sokusebenza somamkeli siyadanyaza. Faka ibhetri kwivili lesandla lombane elingenazingcingo, khusela isiciko sebhetri, kwaye
vula isitshixo samandla sevili lesandla sombane esingenazingcingo. The handwheel’s battery level indicator light is on.
2. Khetha i-axis elungelelanisiweyo: Cinezela kwaye ubambe iqhosha, tshintsha iqhosha lokukhetha i-axis, and select the axis you want to operate.
3. Khetha amandla: Cinezela kwaye ubambe iqhosha, tshintsha iswitshi yokwandisa,and select the desired magnification level.
4. I-Axis eshukumayo: Cinezela kwaye ubambe iqhosha, Khetha utshintsho lokukhetha i-Axis, Khetha utshintsho olwenziyo, kwaye ujikelezise i-pulse encoder. Jikelezisa ngokwewotshi ukuhambisa i
positive axis and counterclockwise to move the negative axis.
5. Cinezela kwaye ubambe nayiphi na iqhosha lesiqhelo, kwaye iqhosha elihambelanayo IO imveliso yomamkeli iya kuvulwa. Khupha iqhosha, and the output will be turned off.
6. Cinezela iqhosha lokumisa elingxamisekileyo, I-temotivemes yokumisa i-IO ikhuphele i-mamkeli iya kuncitshiswa, Umsebenzi we-handheel uya kukhubazeka,Khupha iqhosha lokumisa ngexesha likaxakeka, Indawo yokumisa imeko ye-IO ikhuphe ivaliwe, and the handwheel function will be restored.
7. Ukuba isandla sesandla asisebenzi kangangexesha elithile, iyakungena ngokuzenzekelayo imo yokulala ukunciphisa ukusetyenziswa kwamandla. Xa isetyenziswa kwakhona, the handwheel can be activated by pressing the enable button.
8. Ukuba isandla sisetyenziswe ixesha elide, kucetyiswa ukuba utshintshe i-handwheel shaft kwindawo OFF, Cima igunya lesandla, and extend the battery life.

8. Inkcazo yemodeli yemveliso

① :I-ZTWGP imele isimbo senkangeleko
②：Iparamest parameter parameter:
01: Ibonisa ukuba isignali ye-pulse output ngu-A, B; Pulse voltage 5v; pulse quantity 100PPR.
02：Ibonisa ukuba iimpawu ze-pulse output ngu-A kunye no-B; I-Pulse voltage 12V; pulse quantity 100PPR.
03：Ibonisa ukuba iimpawu ze-pulse output yi-A, B, A -, B -; Pulse voltage 5v; pulse quantity 100PPR.
04：Ibonisa inqanaba lesekethe eliphantsi le-NPN, Nge-pulsemesmes iziphumo ze-A kunye ne-b;The number of pulses is 100PPR.
05：Ibonisa umgangatho wePNP ephezulu yePNP, Nge-pulsemesmes iziphumo ze-A kunye ne-b; The number of pulses is 100PPR.
③：Ukumela inani lokutshintsha kwe-axis yokukhetha, 2 imele 2 axes.
④：Imele uhlobo lwesiginali yokukhetha i-axis, Inqaku le-Point-to-contal, and B represents encoded output signal.
⑤：Imele uhlobo lwesignali yokutshintsha kophindaphindo, Inqaku le-Point-to-contal, and B represents encoded output signal.
⑥：Imele inani lamaqhosha esiko, 2 imele 2 custom buttons.
⑦：Imele unikezelo lwamandla kwi-handwheel yesixokelelwano, kwaye 05 represents 5V power supply.
⑧：L imele ikholamu yasekhohlo (isibambi semela sasekhohlo), kunye no-R umele umhlathi wasekunene (isibambi semela sasekunene).

9.Isisombululo sokungasebenzi kakuhle kweMveliso

10. Ukugcinwa kwemveliso

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Nceda uphephe ukuntywila, ukuwa, ukugoba, njl. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Ukuba ayisetyenziswanga ixesha elide, Nceda ugcine isandheel kwindawo ecocekileyo nekhuselekileyo. Ngexesha lokugcina kunye nokuhamba, attention should be paid to moisture and shock resistance.

11. Ulwazi ngoKhuseleko

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Ukuba ukulungiswa kuyafuneka, Nceda unxibelelane noMvelisi. Ukuba umonakalo ubangelwa kukuzilungisa, Umenzi akazukubonelela ngewaranti

]]> I-fanboel ye-fancheel ye-elektroniki https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 UCanzibe 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Intshayelelo Intshayelelo

I-wireless ngesandla i-elektroniki isetyenziselwa ukukhokelwa ngesandla, ukubeka, Ulungelelwaniso lwesixhobo,kunye neminye imisebenzi kwizixhobo ze-CNC zoMatshini. Le mveliso yamkela itekhnoloji yokuhambisa i-wireless, Ukuphelisa unxibelelwano lwe-wire ye-Wire yeNtloko, Ukunciphisa ukusilela kwezixhobo ezibangelwa ziintambo, ukuphelisa ubugwenxa bokutsalwa kwentambo kunye namabala e-oyile, nokwenza umsebenzi ulunge ngakumbi. Le modeli ye-handwheel ye-elektroniki engenangcingo livili lesandla elizinikeleyo lenkqubo yeFanuc. Ulungelelwaniso lwenkqubo yeFanuc luboniswa ngexesha lokwenyani kwiscreen sevili ngesandla ngeIO-LINK protocol, kunye nokukhethwa kwe-axis,ukuqina, kunye neempawu zeqhosha ziqhagamshelwe ngokuthe ngqo kwinkqubo nge-IO-LINK protocol, reducing wiring.

2. Iimpawu zeMveliso
1. Itekhnoloji yoNxibelelwano lwe-433mhz, umgama wokusebenza ngaphandle kwentambo 40 iimitha;
2. Ukwamkela ukusebenza ngokuzenzekelayo, sebenzisa 32 iiseti zabalawuli abakude abangenazingcingo ngaxeshanye ngaphandle kokuchaphazela omnye nomnye;
3. Inkxaso yeXesha leMiselweyo, Guqula iziphumo zomqondiso, iqhagamshelwe kwisixokelelwano ngocingo lwe-IO;
4. Inkxaso 4 amaqhosha esiqhelo, Guqula isiginali, Imveliso yemveliso kwinkqubo nge-IO-Comit Protocol;
5. Inkxaso ekhawulezayo yokuhamba ngokukhawuleza + kunye neqhosha -, Cinezela kwaye ubambe iqhosha ukuba libuyisele i-handheel ukuba isuse umatshini;
6. Inkxaso ye-6-Axis, Guqula isiginali, Imveliso yemveliso kwinkqubo nge-IO-Comit Protocol;
7. Inkxaso 1X,10x, 100X ulawulo . Inkxaso yokutshintsha uphawu lwe-l0, kunye neziphumo zemiqondiso kwinkqubo nge-IO-LINK protocol;
8. Inkxaso yenza umsebenzi weqhosha, qhagamshela kwinkqubo nge-IO yocingo, kunye ne-encoder yolawulo yenza ngexesha elinye;
9. Inkxaso ePulse ePulser, 100 imibhobho/isangqa, ukufikelela kwisixokelelwano se-MPG handwheel ujongano ngokukhupha isignali ye-encoding ye-AB;

3.IiNkcazo zeMveliso

4.Iimpawu zeMveliso

Amanqaku:
Iqhosha lokuyeka:
Cinezela iqhosha lokumisa elingxamisekileyo, iziphumo ezimbini zikaxakeka zokumisa i-IO kumamkeli ziqhawulwe, kwaye yonke imisebenzi yamavili esandla ayisebenzi.Emva kokuba umiselo olungxamisekileyo lukhutshiwe, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Umboniso weskrini:

③Amaqhosha eSiko:
4 amaqhosha esiqhelo, iqhosha ngalinye lihambelana nenqaku lemveliso ye-IO kumamkeli, iqhagamshelwe kwinkqubo nge-IOLINK. Ngokubanzi, the ~ button is set as a high-speed button.
④Iswitshi yokukhetha i-axis:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Amaqhosha amfutshane:
Cinezela iqhosha elinqumlayo elithi “+ ”ukuhambisa umatshini phambili, kwaye ucinezele iqhosha elinqumlayo "-" ukuhambisa umatshini kakubi. This can replace turning the hand wheel to move the machine.
⑥Iqhosha lokuvula:
Cinezela kwaye ubambe naliphi na elinye lamaqhosha okwenza kumacala omabini kwaye ushukumise ikhowudi ye-pulse ukuze isebenze. Kwaye amaqela amabini okuvumela iziphumo ze-IO kumamkeli zivuliwe. Release the enable button and the enable IO output is disconnected.
⑦ Ukutshintsha komlinganiselo:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Cinezela kwaye ubambe iqhosha le-Qina kwaye uhlunguze i-pulse encoder ukuba athumele ipulse
signal to control the movement of the machine axis.
⑨Ukutshintsha amandla:
Handwheel power button.

5.I-Intermes yeMveliso

6.Isikhokelo semveliso

6.1 Amanyathelo ofakelo lwemveliso

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Jonga umzobo wethu we-wiring, Thelekisa nesixhobo sakho sendawo, kwaye uqhagamshele
the equipment to the receiver via cables.
3. Emva kokuba umntu omkelweyo, I-eriyali exhotywe ngumsebenzi kufuneka iqhagamshelwe,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Kucetyiswa ukuba uyibeke eqongeni kwiKhabhinethi yoMbane yeyona nto ibalulekileyo. Yona
Akuvumelekanga ukushiya i-eriyali ingaqhagamshelwanga okanye ubeke i-eriyali ngaphakathi kwekhabhathi yombane,
which may cause the signal to be unusable.
4.Ekugqibeleni, Vula i-Handweel Ansourt Shintsha kwaye ungasebenza umatshini
handwheel remote control.

6.2 Ubungakanani bofakelo lokufaka

6.3 Umzobo wereferensi ye-Wiring Wiring

7. Ulungiso kunye noKhathalelo

1. Nceda uyisebenzise kwindawo eyomileyo enobushushu obuqhelekileyo kunye noxinzelelo lokwandisa
ubomi benkonzo;
2. Nceda uphephe ukusisebenzisa kwiimeko ezingaqhelekanga ezifana nemvula namaqamza amanzi ukuze andise
Ubomi benkonzo;
3. Nceda ugcine inkangeleko ye-handwheel icocekile ukwandisa ubomi benkonzo;
4. Nceda uphephe ukuntywila, ukuwa, ukugoba, njl. ukuthintela umonakalo kwiindawo ezichanekileyo
ngaphakathi kwivili lesandla okanye kubangele iimpazamo ezichanekileyo;
5. Ukuba ayisetyenziswanga ixesha elide, Nceda ugcine isandheel kwindawo ecocekileyo nekhuselekileyo;
6. Pay attention to moisture and shock during storage and transportation.

8. Ulwazi loKhuseleko

1. Nceda ufunde imiyalelo ngononophelo ngaphambi kokusebenzisa. I-on-rionsals ayivunyelwanga
operating.
2. Nceda uyibuyisele ibhetri ngexesha xa ibhetri iphantsi kakhulu ukunqanda iimpazamo ezibangelwe
insufficient power causing the handwheel to be unable to operate.
3. Ukuba ukulungiswa kuyafuneka, Nceda unxibelelane noMvelisi. Ukuba umonakalo ubangelwa kukuzilungisa,
the manufacturer will not provide warranty.

]]> I-NIGEMPNS ezinikezelweyo nge-eleklityheel ye-elektroniki XWGP-ETS https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 UCanzibe 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Ukwaziswa kolawulo olukude

A.Vula comipostiinyani
I-NEEPTS INDLELA YOKUZIPHATHA NGOKUQINISEKILEYO I-EREDIAL SIBONELINGINS I-EREDIEL ye-elektroniki inamacandelo amabini: Ngomkhethe we-elektroniki + umamkeli;

b.Charactestics

*Inkxaso yeSiemens plc: S7-200 / -300 / -1200；Inkxaso yexesha lokwenyani leSoftware yeNkqubo yokuLungelelanisa；
*Umgama osasaziweyo ongenazingcingo uvulekile 40 iimitha, Itekhnoloji yeTekhnoloji ezenzekelayo, unokusebenzisa 32 Iiseti zezixhobo ngexesha elinye;
*Isifo se-elektroniki sixhotyiwe 2 Iibhetri kwaye zinokusetyenziselwa ngaphezulu kwe 30 iintsuku;
*Umamkeli uxhotywe nge-eriyali yangaphandle yokuphucula umqondiso kwaye kulula ukuyifaka;
*Inkxaso ye-elektroniki ye-elektroniki: i-terple enye ye-100ppr 、Isithuba esinye se-6 、 Isitshisi esinye se-3;
*I-elektroniki ye-elektroniki ixhasa 6 amaqhosha esiqhelo, Ihambelana nedilesi ye-SPC ye-SPC, enokuthi icwangciswe ngokukhululekileyo;

*6 amaqhosha esiko anokulawula 6 tshintsha iziphumo;
*Isikrini esibonisiweyo sibonisa irejista ehambelana ne-PLC yexabiso ngexesha lokwenyani, and supports 6-axis display of real-time coordinates.

2.Ifildi yesicelo

Ulawulo lwe-CNC lwe-CNC lwe-CNC lusetyenziswa ngokubanzi kumacandelo ohlukeneyo e-cnc anjengeNkqubo ye-laser, Umatshini wokumisa i-cnc, Iziko le-CNC Mating, Isixhobo soMatshini we-GNGRY, njl.

3. Intshayelelo yomgaqo wokuSebenza

1) Isandla se-elektroniki siqhagamshelwe kwi-plc nge-Ethernet Amkeli

A.I-Handhesedeli idlulisela i-the fictone ngaphandle kwe-wireless, kwaye umamkeli ubhala izitshixo ngenkqubo ye-plc yenethiwekhi ye-DB; Umamkeli ufunda idatha ukuba iboniswe kwindawo echongiweyo ye-DB, kwaye emva koko ibuyise idatha kwiscreen handheel sibonisa isikrini. Umsebenzisi unokwenza ngokwezifiso idilesi yokufunda nokubhala indawo ye-DB kwi-handheel, so that the handwheel can read and write the data in the DB area of the PLC.

b. Inkxaso yamamkeli i-SIGEns S7 Iprotocol. Isebenza kwi-plc s7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

Kwimowudi yeseva, Umsebenzisi uqwalasela i-PLC yokufunda kwaye ubhale idilesi ngesoftware ye-WTS-ETS;Sebenzisa isixhobo sePlC uqhagamshelo. Emva koqwalaselo, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Isicelo esithile

Ukusetyenziswa okuthile kwesandla sesandla kunye ne-neemens plc s7-200:

a. Iqhosha elikwi-handweel lihambelana nexabiso lendawo ye-bool esekwe ngumsebenzisi kwi-plc. Ukuba iqhosha lesandla licinezelwe, Indawo ehambelana nayo inyani iyinyani, kwaye xa ikhutshwe, Bubuxoki, Idilesi yesiseko yendawo ye-bool inokusetwa kwi-handheel;

b. Isandla sinokufunda ixabiso lendawo ye-DB kwi-plc. I-Axis enye inayo 4 I-Byte yedatha yokubonisa, kwaye 6 I-axes inezinto zonke 24 i-byte. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Intshayelelo

5.Inkcazo yesiphelo sephepha kunye netafile yokufaka edolophini

6.Ubungakanani bembonakalo

 

 

]]>