1.Ifihan ọja

2.Awọn ẹya ọja

Tẹ ki o mu bọtini ṣiṣẹ, then toggling the axis selection switch can control the movement of axis .Press and hold the enable button, then toggle the axis selection switch to switch the motion axis controlled by the remote control. Toggle the switch from the OFF position to any axis position, and the remote control will power on automatically.

④ Pulse Encoder:

Press and hold the enable button and rotate the pulse encoder, it will output pulse signals to control the movement of the machine axis.

⑤ LCD Display Screen:

5. Product Accessories Diagram

 

6. Itọsọna fifi sori ọja ọja

6.1 Awọn igbesẹ Ami ọja

1. Install the receiver in the electrical cabinet via the buckle on its back, or mount it inside the electrical cabinet through the screw holes at the four corners of the receiver.

2. Tọkasi si Aworan Wirgram Wiring Wa, Ṣe afiwe rẹ pẹlu ohun elo lori-aaye rẹ, and connect the equipment to the receiver with cables.

3. After the receiver is fixed in place, install the supporting antenna of the receiver properly. Mount or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for optimal signal performance. Do not leave the antenna uninstalled or place it inside the electrical cabinet; bibẹkọ ti, signal failure may occur.

4. L'akotan, turn on the remote control power switch, then you can remotely operate the machine via the remote control.

6.2 Receiver Installation Dimensions

6.3 Olugba Wirgram Itọkasi Pipe

7. Awọn ilana isẹ ọja

1. Agbara lori ẹrọ ati olugba. The receiver operation indicator flashes. After the wireless electronic remote control is fully charged, toggle it from the OFF gear to the X-axis gear, and the remote control display lights up.

2. Select the axis : Tẹ ki o mu bọtini ṣiṣẹ, toggle the axis selection switch to select the axis to be operated.

3. Select the magnification: Tẹ ki o mu bọtini ṣiṣẹ, toggle the magnification switch to select the required magnification gear.

4. Axis movement: Tẹ ki o mu bọtini ṣiṣẹ, select the axis selection switch and the magnification switch, then rotate the pulse encoder. Rotate clockwise to move the axis in the positive direction, and rotate counterclockwise to move the axis in the negative direction.

5. Tẹ ki o mu eyikeyi bọtini aṣa, the corresponding button IO output of the receiver will turn on; release the button, and the output will turn off.

6. Tẹ bọtini iduro pajawiri, the corresponding emergency stop IO output of the receiver disconnects and the remote control function becomes invalid. Release the emergency stop button, the emergency stop IO output closes and the remote control function is restored.

7. If the wireless remote control is not operated for a period of time, O yoo sọ ipo oorun lati dinku agbara agbara. It can be used normally again by pressing the enable button again.

8.If the wireless remote control is not used for a long time, turn the axis switch to OFF to turn off the power and extend battery life

8. Apejuwe awoṣe ọja

①：UWGP stands for appearance style.

②：Pulse Output Parameters：

05: Tọkasi orisun orisun orisun PNP giga-giga, pẹlu awọn ifihan agbara iyọ ti a ati b; The number of pulses is 100PPR.

③：Represents the axis selection switch quantity; 6 stands for 6 ala, 7 stands for 7 ala, and so on.

④: Represents the signal type of the axis selection switch.A stands for point-to-point output signal, and B stands for encoder output signal.

⑤: Represents the signal type of the magnification switch.A stands for point-to-point output signal, and B stands for encoder output signal.

⑥: Duro aṣoju awọn bọtini aṣa; 3 corresponds to 6 custom buttons.

⑦: Represents the power supply for the system remote control. 05 stands for 5V power supply, ati 24 stands for 24V power supply.

⑧: Represents the contact charging mode. It starts charging automatically when placed back on the charging base.

9. Pelusisita ọja

 

10. Maintenance and upkeep

1. Please use it in a dry environment at room temperature and pressure to extend its service life.

2. Please avoid using in abnormal environments such as rain and water to extend the service life.

3. Please keep the appearance of the remote control clean to extend its service life.

4. Please avoid crushing, dropping, or bumping, patako ati bẹbẹ. to prevent damage to the precision components inside the remote control or accuracy errors.

5. Ti ko ba lo fun igba pipẹ, please store the remote control in a clean and safe place.

6. Avoid moisture and shock during storage and transportation.

1. Ifihan ọja

Handwheel ṣiṣẹ agbara ipese foliteji	DC24V/1A
Oluṣinṣin Agbara Agbara Agbara	DC24V/1A
Olugba IO o wu fifuye ibiti	DC24V
Ọwọ kẹkẹ opin USB ipari	10m
Ipari okun olugba opin	1m
Ipari okun nẹtiwọki olugba opin	3m
Iwọn otutu ti nṣiṣẹ	-25℃<X<55℃
Anti-isubu iga	1m
Aṣa Button opoiye	6
Awọn iwọn ọja	233*90.7*77.4(mm)

4.Ifihan iṣẹ ọja

Akiyesi:

Bọtini idaduro pajawiri:

Tẹ bọtini iduro pajawiri, Ati awọn seto ti awọn ito awọn iyọrisi io jade lori olugba yoo ni asopọ, and all functions of the handwheel will be invalid.

Lẹhin itusilẹ idaduro pajawiri, ITAN IM IO IPUPUPUPURT lori olugba ti wa ni pipade, and all functions of the handwheel are restored.

② Ifihan iboju:

6.2 Olugba awọn ifitonileti fifi sori ẹrọ

6.3 Awọn iwọn fifi sori ẹrọ ti awọn pilogi ọkọ ofurufu

6.4 Olugba Wirgram Itọkasi Pipe
7.Awọn ilana isẹ ọja

1. Nigbati olugba ba wa ni titan ati ina Atọka iṣẹ ti olugba seju, so olugba pọ mọ kọmputa pẹlu okun nẹtiwọki kan, ṣeto adiresi IP ti o wa titi ti kọnputa naa, ati lo sọfitiwia irinṣẹ atunto nẹtiwọọki lati ṣeto awọn aye nẹtiwọọki ti iṣẹ ọwọ ọwọ. Fun awọn ọna eto pato, tọka si awọn “LXWGP-ETS Afọwọṣe Olumulo Handwheel ti firanṣẹ”.

2.Lẹhin ti awọn olugba ti ṣeto soke, Eto naa nilo lati ṣe eto eto PLC kan. Jọwọ tọkasi awọn “LXWGP-ETS Oriṣiriṣi Siemens Nọmba Iṣakoso Eto Awọn ọna Eto” and PLC program routine materials for details.

3.Lẹhin ti pari awọn eto loke, ya awọn olugba si awọn ẹrọ itanna minisita ki o si fi o. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.Lẹhin ti pari awọn eto loke, ya awọn olugba si awọn ẹrọ itanna minisita ki o si fi o. Fa okun nẹtiwọọki jade lati kọnputa ki o pulọọgi sinu wiwo X ti eto naa. Connect the receiver power supply and pulse line.

5. Yan yiyan asulu: Switch the axis selection switch and select the axis you want to operate on.

6. Yan igbekun: Switch the magnification switch and select the magnification level you need.

7. Igbese gbigbe: Tẹ ki o mu bọtini ṣiṣẹ, Yan yipada yiyan axis, Yan Yipada Aago, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.

8. Tẹ mọlẹ eyikeyi bọtini aṣa lati tan iṣẹjade IO ti bọtini ibaramu ninu olugba, and release the button to turn off the output.

9. Tẹ bọtini iduro pajawiri, Ina pajawiri Io Nkan ti olugba yoo ti ge asopọ, Iṣẹ ọwọ ọwọ yoo jẹ alaabo, Tu silẹ Bọtini Duro pajawiri, Iduro pajawiri Io Opsips yoo wa ni pipade, and the handwheel function will be restored.

8.Apejuwe awoṣe ọja

9.Ọja wahala ibon

1.Ifihan ọja

2. Awọn ẹya iṣẹ iṣẹ

3. Awọn alaye ọja

Ṣiṣẹ foliteji ati lọwọlọwọ ti jijin alailowaya	3V / 14ma
Awọn alaye batiri	2 AA alkaline batiri, size 5
Itaniji foliteji kekere ti o latọna jijin	< 2.3V
Oluṣinṣin Agbara Agbara Agbara	DC5V-24V / A
Olugba pajawiri fifuye Iyọkuro	Ac125V-1A / DC30V-2A
Olugba mu ki iwọn fifuye	Ac125V-1A / DC30V-2A
Olugba Aṣa Custops IWE IWE	DC24V / 50MA
Ifiweranṣẹ Ayipada Ayipada Nkan	DC24V / 50MA
Gbigbe Iwọn Irawọ fifẹ	DC24V / 50MA
Agbara gbigbe ti iṣan ọwọ	15dbm
Olugba ngba ifamọra	-100dbm
Irọrun Ibaraẹnisọrọ alailowaya	433Anshz ẹgbẹ igbohunsafẹfẹ
Ijinna ibaraẹnisọrọ	Idena free ijinna ti 40 igun
Iwọn otutu	-25℃ < X < 55℃
Anti isubu giga	1 (mita)
Opo bọtini Custo	2

4. Ifihan iṣẹ ọja

Awọn akọsilẹ:

① Pluse Encoder:
Tẹ ki o mu bọtini ṣiṣẹ, gbọn koko ensu, emit kan ti pulse,and control the movement ofthe machine axis.
② Mu bọtini ṣiṣẹ:
Tẹ boya o mu bọtini ṣiṣẹ lori boya ẹgbẹ, ati awọn seto awọn meji ti ṣiṣe awọn jade io lori olugba yoo ṣe iṣe. Tusilẹ bọtini lati ge asopọ ti o jẹ ohun elo IO; Ati ki o to tele yiyipada aarọ yiyan-ipo ati gbigbọn tẹnumọ,Bọtini Bọtini ṣiṣẹ lati wa ni isalẹ lati munadoko; This function can be cancelled through configuration software.

③ awọn imọlẹ itọkasi:
Apa osi ina: agbara lori ina,Awọn oju opo wẹẹbu naa nlo awọn ipo lati yan pipa fun agbara lori, Ina yii wa lori lẹhin agbara lori;
Imọlẹ Aarin: Imọlẹ ifihan ti awọn imọlẹ soke nigbati o ba n ṣiṣẹ eyikeyi iṣẹ ti wa ni ibi ipamọ, ati pe ko ni ina nigbati ko si iṣẹ;
Imọlẹ ẹgbẹ ọtun: Itaniji Itaniji Foltional, Ipele batiri kekere,Awọn ila ina tabi awọn duro lori, battery needs to be replaced.

Bọtini Duro pajawiri:
Tẹ bọtini iduro pajawiri, Ati awọn seto ti awọn ito awọn iyọrisi io jade lori olugba yoo ni asopọ, and all functions of the handwheel will be invalid.

⑤ yipada titobi:
Tẹ ki o mu bọtini mu ṣiṣẹ lati yi iyipada titobi, which can switch the magnification controlled by the handwheel.

⑥ yipada yiyan (yipada agbara):
Tẹ ki o mu bọtini mu ṣiṣẹ lati yi iyipada asayan ipo pada, eyiti o le yi ọna ilana gbigbe lọwọlọwọ nipasẹ ọwọ ni ọwọ. Switch this switch from OFF to any axis and turn on the handwheel power.

Bọtini Aṣa:
Awọn bọtini Aṣa Meji, each corresponding to an IO output point on the receiver.

5. Aworan apẹrẹ ọja

6. Itọsọna fifi sori ọja ọja
6.1 Awọn igbesẹ Ami ọja

1. Fi olugba sinu minisita itanna nipasẹ ipinnu naa lori ẹhin, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Tọka si aworan apanirun wa ki o ṣe afiwe rẹ pẹlu ohun elo lori-aaye rẹ. Connect the equipment to the receiver via cables.
3.Lẹhin olugba ni o wa titi, eriali ti ni ipese pẹlu olugba gbọdọ wa ni asopọ, ati opin ti ita ti yẹ ki o fi sori ẹrọ tabi gbe ni ita minisita itanna. O ti wa ni niyanju lati gbe lọ si oke ti minisita itanna fun ipa ifihan agbara ti o dara julọ. O ti wa ni idinamọ lati fi eriana ti a ko yan tabi gbe e si ẹgbẹ itanna itanna, as this may result in the signal being unusable.
4. L'akotan, tan-an yipada ọwọ ti paleti, and you can operate the machine remotely using the handwheel.

6.2 Olugba awọn ifitonileti fifi sori ẹrọ

6.3 Olugba Wirgram Itọkasi Pipe

7. Awọn ilana isẹ ọja
1. Agbara lori ẹrọ ati olugba. Awọn irufẹ olugba olugba. Fi batiri sori ẹrọ ninu ẹrọ alailowaya alailowaya, Ṣe aabo ideri batiri, ati
Tan-an yipada agbara ti ẹrọ alailowaya alailowaya. The handwheel’s battery level indicator light is on.
2. Yan awọn ilana ipoidojuko: Tẹ ki o mu bọtini ṣiṣẹ, Yipada iyipada asayan, and select the axis you want to operate.
3. Yan igbekun: Tẹ ki o mu bọtini ṣiṣẹ, lati yi yipada,and select the desired magnification level.
4. Igbese gbigbe: Tẹ ki o mu bọtini ṣiṣẹ, Yan yipada yiyan axis, Yan Yipada Aago, ati pe lẹhinna yiyi inu polu. Yiyi okun agogo lati gbe awọn
positive axis and counterclockwise to move the negative axis.
5. Tẹ ki o mu eyikeyi bọtini aṣa, ati bọtini ti o baamu io jade ti olugba yoo wa ni titan. Tusilẹ bọtini, and the output will be turned off.
6. Tẹ bọtini iduro pajawiri, Ina pajawiri Io Nkan ti olugba yoo ti ge asopọ, Iṣẹ ọwọ ọwọ yoo jẹ alaabo,Tu silẹ Bọtini Duro pajawiri, Iduro pajawiri Io Opsips yoo wa ni pipade, and the handwheel function will be restored.
7. Ti o ba ti fi ọwọ ko ṣiṣẹ fun akoko kan, O yoo sọ ipo oorun lati dinku agbara agbara. Nigbati o ti lo lẹẹkansi, the handwheel can be activated by pressing the enable button.
8. Ti a ko lo fi ọwọ silẹ fun igba pipẹ, O ti wa ni niyanju lati yi kuro ni ọpa ẹhin si ipo pipa, Pa a agbara ọwọ, and extend the battery life.

8. Apejuwe awoṣe ọja

① :ZTWGP ṣe aṣoju aworan hihan
②：Purse awọn paramita:
01: Tọkasi pe ifihan ti o ni itọsi jẹ kan, B; Pulsiot 30; pulse quantity 100PPR.
02：Nfihan pe awọn ifihan agbara ti o lagbara; Pulse folti 12V; pulse quantity 100PPR.
03：Nfihan pe awọn ifihan agbara ti o ni pulse jẹ a, B, A -, B -; Pulsiot 30; pulse quantity 100PPR.
04：Tọkasi awọn iwọn Circuit kekere, pẹlu awọn ifihan agbara iyọ ti a ati b;The number of pulses is 100PPR.
05：Tọkasi orisun orisun orisun PNP giga-giga, pẹlu awọn ifihan agbara iyọ ti a ati b; The number of pulses is 100PPR.
③：Nsoju nọmba ti awọn iyipada yiyan asa yipada, 2 duro fun 2 axes.
④：Duro fun iru ti yiyan asahan yipada, Awọn aṣoju aṣoju-si-aaye abajade satelaiti, and B represents encoded output signal.
⑤：Duro fun iru ifihan agbara pupọ, Awọn aṣoju aṣoju-si-aaye abajade satelaiti, and B represents encoded output signal.
⑥：Duro aṣoju awọn bọtini aṣa, 2 duro fun 2 custom buttons.
⑦：Duro fun ipese agbara fun eto ọwọ, ati 05 represents 5V power supply.
⑧：L ṣe aṣoju iwe osi (HOVE MIVE), ati r o duro fun iwe ti o tọ (Voiri ọbẹ ọbẹ).

9.Solusan si awọn iṣẹ-ṣiṣe ọja ọja

1.Ifihan ọja

Ti a ko wulo itanna itanna ti a lo fun itọsọna Afowoyi, ipo, Ohun elo irinṣẹ,ati awọn iṣiṣẹ miiran lori awọn irinṣẹ ẹrọ CNC. Ọja yii tẹsiwaju ni imọ-ẹrọ ti ko le sọ alailowaya, imukuro asopọ okun waya ti ibi-giga, Awọn ikuna ẹrọ ti o fa nipasẹ awọn kebulu, Imukuro awọn alailanfani ti okun ti okun fa ati awọn abawọn epo, ati ṣiṣe iṣẹ ni irọrun. Awoṣe yii ti itanna itanna alailowaya jẹ ọwọ ifiṣootọ ifiṣootọ fun eto fanuc. Awọn ipoidojuko ifihan awọn ipoidojuko ni a fihan ni akoko gidi ni iboju iboju ti ọna ni ipilẹ Io-ọna asopọ, ati yiyan axis,igbaya, ati awọn ifihan agbara bọtini ti sopọ taara si eto nipasẹ Ilana ISO-asopọ, reducing wiring.

2. Awọn ẹya ọja
1. Awọn imọ-ẹrọ ti a ko gba 43MHz, Alailowaya ijinna jẹ 40 igun;
2. Gba iṣẹ Igbagbogbo Igbagbogbo Igbasilẹ Aifọwọyi Aifọwọyi, lo 32 Awọn eto ti awọn oludari latọna jijin alailowaya ni akoko kanna laisi ipa ara wọn;
3. Bọtini Ipa Pajawiri, Yipada Io ifihan, ti sopọ si eto nipasẹ io waring;
4. Atilẹyin 4 Awọn bọtini aṣa, Yipada Io ifihan, Ifihan iṣelọpọ si eto nipasẹ Ilana ISO-asopọ;
5. Ṣe atilẹyin Bọtini Iyipada iyara + ati bọtini -, Tẹ mọlẹ bọtini naa lati ropo iwe ọwọ ni ọwọ;
6. Ṣe atilẹyin Iṣakoso 6 -XIS, Yipada Io ifihan, Ifihan iṣelọpọ si eto nipasẹ Ilana ISO-asopọ;
7. Atilẹyin 1x,10x, 100Iṣakoso X . Ṣe atilẹyin ifihan L0 L0, ati awọn ami iṣalaye si eto nipasẹ Ilana asopọ Io-ọna asopọ;
8. Atilẹyin ṣiṣẹ iṣẹ bọtini, Sopọ si eto nipasẹ io waring, ati Iṣakoso Account mu ṣiṣẹ ni akoko kanna;
9. Ṣe atilẹyin BLUS ENGE, 100 Pulses / Circle, Wọle si Eto MPG MPG ni wiwo nipasẹ Autphone ab concodeg ifihan;

3.Awọn alaye ọja

4.Awọn ẹya Ọja

Awọn akọsilẹ:
Bọtini Duro Duro:
Tẹ bọtini iduro pajawiri, Awọn ito iṣẹ-ọna Io Meji, ati pe gbogbo awọn iṣẹ iranlọwọ ko wulo fun iduro pajawiri ni a tu silẹ, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

Ifihan ②Sreen:

Awọn bọtini ③verustom:
4 Awọn bọtini aṣa, Bọtini kọọkan ni ibamu si aaye orisun Io lori olugba, ti sopọ si eto nipasẹ iolink. Ti gbogboogbo, the ~ button is set as a high-speed button.
④axis yiyan yipada:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
Awọn bọtini ⑤shortcutt:
Tẹ bọtini ọna abuja "+" lati gbe ẹrọ siwaju, ki o tẹ bọtini gige kukuru "-" lati gbe ẹrọ naa ni odi.. This can replace turning the hand wheel to move the machine.
Bọtini itẹwe:
Tẹ mọlẹ. Ati awọn ẹgbẹ meji ti o jẹ awọn iyọrisi io lori olugba wa ni tan-an. Release the enable button and the enable IO output is disconnected.
⑦ratio yipada:
Switching the magnification switch can switch the magnification of handwheel control.
Imukuro ⑧pulse:
Tẹ mọlẹ
signal to control the movement of the machine axis.
} Ti yipada:
Handwheel power button.

5.Awọn ohun elo Awọn ẹya ẹrọ Intanẹẹti

6.Itọsọna fifi sori ọja ọja

6.1 Awọn igbesẹ Ami ọja

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Tọkasi si Aworan Wirgram Wiring Wa, Ṣe afiwe rẹ pẹlu ohun elo lori-aaye rẹ, ati sopọ
the equipment to the receiver via cables.
3. Lẹhin olugba naa wa ni titunse, eriali ti ni ipese pẹlu olugba gbọdọ wa ni asopọ,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
O ti wa ni niyanju lati gbe lọ si oke ti minisita itanna fun ipa ifihan agbara ti o dara julọ. Oun
ti ni idinamọ lati fi eriana ti a ko yan tabi gbe eriali sinu minisita itanna,
which may cause the signal to be unusable.
4.L'akotan, Tan agbara agbara ọwọ ni ọwọ ati pe o le ṣiṣẹ ẹrọ nipasẹ
handwheel remote control.

6.2 Olugba awọn ifitonileti fifi sori ẹrọ

6.3 Olugba Wirgram Itọkasi Pipe

7. Itọju ati abojuto

1. Jọwọ lo o ni agbegbe gbigbẹ pẹlu iwọn otutu deede ati titẹ lati faagun awọn
iṣẹ igbesi iṣẹ;
2. Jọwọ yago fun lilo rẹ ni awọn agbegbe ajeji gẹgẹ bi ojo ati awọn akara omi lati faagun
igbesi aye iṣẹ;
3. Jọwọ jẹ ki ifarahan ti ọwọ ti o mọ lati fa igbesi aye iṣẹ naa fa;
4. Jọwọ yago fun sisọ, ja bo, ijagun, patako ati bẹbẹ. Lati yago fun ibajẹ si awọn ẹya asọye
ninu inu ọwọ tabi fa awọn aṣiṣe konta;
5. Ti ko ba lo fun igba pipẹ, Jọwọ fi ọwọ ni ọwọ ni ibi mimọ ati ailewu;
6. Pay attention to moisture and shock during storage and transportation.

8. Alaye Aabo

1. Jọwọ ka awọn itọsọna naa daradara ṣaaju lilo. Ti a ko ṣe awọn oluṣele ti wa ni idinamọ lati
operating.
2. Jọwọ rọpo batiri ni akoko nigbati batiri naa kere ju lati yago fun awọn aṣiṣe ti o fa nipasẹ
insufficient power causing the handwheel to be unable to operate.
3. Ti Tunṣe ba nilo, Jọwọ kan si olupese. Ti ibajẹ ba fa nipasẹ atunṣe ara-ẹni,
the manufacturer will not provide warranty.

1.Ifihan ọja

Ti a ko wulo itanna itanna ti a lo fun itọsọna Afowoyi, ipo, eto irinṣẹ ati
Awọn iṣẹ miiran ti awọn irinṣẹ ẹrọ CNC. Ọja yii tẹsiwaju ni imọ-ẹrọ ti ko le sọ alailowaya,
imukuro asopọ okun waya ti ibi-giga, Awọn ikuna ẹrọ ti o fa nipasẹ awọn kebulu,
Imukuro awọn aila-nla ti okun ti n fa, Awọn abawọn epo, patako ati bẹbẹ, ati pe o rọrun si
ṣiṣẹ. O ti wa ni lilo pupọ ni awọn irinṣẹ ẹrọ CNC bii awọn ile-iṣẹ iyanrin, ẹgbẹsan
inaro awọn lithes, Awọn ero Processing CNC, ati pe o le ṣe deede si ọpọlọpọ awọn CNC
awọn ọna ṣiṣe lori ọja, bii Simemens, Metsubishi, Fatunu, Syntec ati eto CNC miiran
brands.

2.Awọn ẹya ọja

1. Awọn imọ-ẹrọ ti a ko gba 43MHz, Alailowaya ijinna jẹ 80 igun;
2. Gba iṣẹ Igbagbogbo Igbagbogbo Igbasilẹ Aifọwọyi Aifọwọyi, lo 32 Awọn ilana ti awọn oludari latọna jijin ti ko ni
akoko kanna laisi ipa ara wọn;
3. Bọtini Ipa Pajawiri, Ati lẹhin ti pale kuro ni pipa, Iduro pajawiri
Bọtini tun wulo;
4. Atilẹyin 6 Awọn bọtini aṣa, Yipada Io ifihan;
5. Ṣe atilẹyin Iṣakoso 6 -XIS, 7-12 A le ṣe adani-adani le jẹ adani;
6. Atilẹyin 1x,10X, 100X Iṣakoso ati pe o le jẹ isọdi ti o pọju 1000x;
7. Ṣe atilẹyin iṣẹ ṣiṣe ṣiṣẹ, Awọn iyọnu L0 L0. Aṣayan axis,Mainirication
ati Encoder.;
8. Aṣayan Axis atilẹyin ati Iṣakojọpọ Igbẹjade Aṣayan;
9. Ṣe atilẹyin gbigba agbara iru, 5Awọn alaye ti n ṣaja V-2A, Alaye ti a ṣe sinu
14500/1100mAh.

3.Awọn alaye ọja

4.Ifihan iṣẹ ọja

Awọn akọsilẹ：
Bọtini Duro Duro：
Nigbati bọtini idaduro pajawiri ti tẹ, Awọn iṣelọpọ Io Meji Io Awọn aṣayan lori
olugba naa ti ge, ati pe gbogbo awọn iṣẹ agbara ko wulo. Nigbati pajawiri
da duro, ITAN IM IO IPUPUPUPURT lori olugba ti wa ni pipade, ati gbogbo iṣẹ
Awọn iṣẹ ti wa ni mu pada; Ati lẹhin ti pale kuro ni pipa, Ite pajawiri Io itojade
of the receiver is still valid when the emergency stop button is pressed.

Bọtini itẹwe:
Tẹ eyikeyi ọkan ninu awọn bọtini ṣiṣe ni awọn ẹgbẹ mejeeji, ati awọn ẹgbẹ meji ti jeki io
Awọn jade lori olugba yoo wa ni titan. Tusilẹ bọtini ṣiṣẹ ati mu ṣiṣẹ io
Iyọ yoo wa ni pipa. Ni afikun, O nilo lati tẹ bọtini ṣiṣẹ ṣaaju ki o to
Yipada pinpin lilọ kiri Axis ati gbigbọn tẹnumọ. Iṣẹ yii le jẹ
canceled through the configuration software.
③axis yiyan yipada (yipada agbara):
Tẹ ki o mu bọtini ṣiṣẹ ati yi pada yipada yipada yipada si yipada
Gbigbe Adato ni iṣakoso nipasẹ iwe afọwọkọ. Yipada yipada yii lati pa si awọn ipo eyikeyi ati
turn on the handwheel power.

Imukuro ④pulse:
Tẹ mọlẹ
signal to control the movement of the machine axis.

Atọka ⑤Attery:
Ifihan agbara kẹkẹ ọwọ, gbogbo imọlẹ tumọ si agbara ni kikun, Gbogbo kuro ni ọna kii ṣe
tan tabi ko ni agbara, Awọn ẹka igi gbigbẹ akọkọ, nfihan pe agbara jẹ kekere ju,
please charge in time.
Awọn imọlẹ awọn imọlẹ:
Ti ina ifihan ba wa, O tumọ si pe a ṣiṣẹ ni ọwọ ati ifihan naa jẹ
deedee; Ti ina ifihan ba wa ni pipa, o tumọ si pe ko si iṣẹ kankan, tabi o ti ṣiṣẹ ṣugbọn
the wireless signal is not connected.

5.Awọn ohun elo Awọn ẹya ẹrọ Intanẹẹti

6.Itọsọna fifi sori ọja ọja

6.1 Awọn igbesẹ Ami ọja
1. Fi olugba sinu minisita itanna lilo awọn agekuru lori ẹhin, tabi fi sii ni
the electrical cabinet using the screw holes at the four corners of the receiver.
2.Tọkasi si Aworan Wirgram Wiring Wa, Ṣe afiwe rẹ pẹlu ohun elo lori-aaye rẹ, ati sopọ
the equipment to the receiver via cables.
3.Lẹhin olugba naa wa ni titunse, eriali ti ni ipese pẹlu olugba gbọdọ wa ni asopọ,
ati opin itale gbọdọ wa ni fi sori ẹrọ tabi gbe ni ita minisita itanna.. Oun
ni a ṣe iṣeduro lati gbe lọ si oke ti minisita itanna fun ipa ifihan agbara ti o dara julọ. O jẹ
Ewọ lati fi eriali ti ko le yan eriali ko le yan eriali ninu minisita itanna,
which may cause the signal to be unusable.
4. L'akotan, Tan agbara agbara ọwọ ni ọwọ ati pe o le ṣiṣẹ ẹrọ nipasẹ
handwheel remote control.

6.2 Olugba awọn ifitonileti fifi sori ẹrọ

6.3 Olugba Wirgram Itọkasi Pipe

7.Awọn ilana isẹ ọja
1. Ẹrọ naa ni agbara lori, olugba naa ni agbara lori, olufihan iṣẹ olugba
awọn ina ina, Alailowaya ti a ko ṣe alailowaya ti fi sori ẹrọ ti o fi sori ẹrọ naa, ideri batiri
ti wa ni yara, Alailowaya Alailowaya agbara agbara ti wa ni titan, ati awọn
Imọlẹ agbara fielteel wa lori;
2. Yan awọn ilana ipoidojuko: Tẹ ki o mu bọtini ṣiṣẹ, Yipada yiyan yiyan
yipada, ki o yan ipo ti o fẹ lati ṣiṣẹ lori;
3. Yan igbekun: Tẹ ki o mu bọtini ṣiṣẹ, Yipada iyipada titobi,
ki o yan ipele ti o gaju ti o nilo;
4. Igbese gbigbe: Tẹ ki o mu bọtini ṣiṣẹ, Yan yipada yiyan axis, yan
Yi yipada, ati pe lẹhinna rotateti polusi lati yi ipo gbigbe ti o daju
Awọn igbesẹ aago ati asa irin-ajo odi;
5. Tẹ ki o mu eyikeyi bọtini aṣa, ati bọtini ti o baamu io jade ti awọn
Olugba yoo wa ni titan. Tusilẹ bọtini lati pa o wu eniyan;
6. Tẹ bọtini iduro pajawiri, Itẹni pajawiri ti o baamu io iojade ti awọn
olugba ti wa ni ge asopọ, Iṣẹ ọwọ ọwọ jẹ alaabo, Tu idaduro pajawiri
bọtini, IWE ITO ISO OPUPTPTS ti wa ni pipade, ati iṣẹ ọwọ ọwọ ti mu pada;
7. Ti o ba ti fi ọwọ ko ṣiṣẹ fun akoko kan, Yoo tẹ oorun laifọwọyi
ipo lati dinku agbara agbara. Nigbati o ti lo lẹẹkansi, Awọn ọwọ ni ọwọ le jẹ
mu ṣiṣẹ nipasẹ titẹ bọtini ṣiṣẹ;
8. Ti a ko lo fi ọwọ silẹ fun igba pipẹ,O ti wa ni niyanju lati yi kuro ni Mimọ
Slaft si ipo pipa, Pa a agbara ọwọ, and extend the battery life.

8.Apejuwe awoṣe ọja

① ：Dwanp ṣe aṣoju aworan hihan

② ：Purse awọn paramita:
01: Tọkasi pe awọn ifihan agbara to lagbara jẹ kan ati b, ati folti pulọọgi jẹ 5V; Lọpọ
opoiye 100ppr;
02: Tọkasi pe awọn ifihan agbara to lagbara jẹ kan ati b, ati folti pulọọgi jẹ 12V; Lọpọ
opoiye 25pp;
03: Tọkasi pe ifihan ti o ni itọsi ti o wa ninu、A-、B-； Pulsiot 30; Pulse quantity 1
00Ppre;
04: Tọkasi awọn iwọn Circuit kekere, pẹlu awọn ifihan agbara iyọ ti a ati b; awọn
Nọmba ti ẹdọ ni 100pp;05: Tọkasi orisun orisun orisun PNP giga-giga, Pulpu awọn ifihan agbara
jẹ ati b; Pusi opoiye jẹ 100ppry;
③ : duro fun nọmba ti awọn ayipada yiyan ti axis, 6 duro fun 6 eegun, 7 duro fun 7 axis.
④ : duro fun iru ti yiyan asahan yipada, Awọn aṣoju aṣoju-si-aaye abajade satelaiti,
B ṣe aṣoju ifihan iṣelọpọ;

⑤ : ṣe aṣoju iru ifihan iyipada ti o gaju,
Awọn aṣoju aṣoju-si-aaye abajade satelaiti, B ṣe aṣoju ifihan iṣelọpọ;
⑥ : duro aṣoju awọn bọtini aṣa, 6 duro fun 6 Awọn bọtini aṣa;
⑦ : duro fun ipese agbara fun eto ọwọ, 05 duro fun ipese agbara 5V,
ati 24 represents 24V power supply.

9.Pelusisita ọja

10. Itọju ati abojuto

1. Jọwọ lo o ni agbegbe gbigbẹ ni iwọn otutu yara ati titẹ lati fa igbesi aye iṣẹ rẹ gbooro;
2. Jọwọ yago fun lilo ni awọn agbegbe ajeji gẹgẹ bi ojo ati awọn akara omi lati fa igbesi aye iṣẹ naa;
3. Jọwọ jẹ ki ifarahan ti ọwọ ti o di mimọ lati fa igbesi aye iṣẹ rẹ pọ si;
4. Jọwọ yago fun sisọ, ja bo, ijagun, patako ati bẹbẹ. Lati yago fun ibajẹ si awọn ẹya tootọ ninu
awọn ọwọ ọwọ tabi awọn aṣiṣe deede;
5. Ti ko ba lo fun igba pipẹ, Jọwọ fi ọwọ ni ọwọ ni ibi mimọ ati ailewu;
6.Lakoko ibi ipamọ ati gbigbe, attention should be paid to moisture and shock resistance.

11.Alaye Aabo

1. Jọwọ ka awọn itọsọna naa ni pẹkipẹki ṣaaju lilo ati idiwọ ti kii ṣe awọn akosemose lati iṣiṣẹ;
2. Nigbati ipele batiri naa kere ju, Jọwọ gba agbara si o ni akoko lati yago fun awọn aṣiṣe ti o fa nipasẹ ko to
Batiri ati ailagbara lati ṣiṣẹ ni ọwọ;

3. Ti Tunṣe ba nilo, Jọwọ kan si olupese. Ti ibajẹ ba fa nipasẹ titunṣe ara, the manufacturer will not provide warranty.

Awoṣe：ATWGP-12

Eto aṣamubadọgba: Gbogbo awọn eto CNC pẹlu wiwo ọwọ

Ọja yii jẹ afọwọkọ itọsọna ti o lo pẹlu awọn irinṣẹ ẹrọ CNC. O ti lo ni awọn aaye bii awọn irinṣẹ ẹrọ CNC, Awọn ipele cnc, Awọn ile-iṣẹ ẹrọ ẹrọ,CNC eggraving ati awọn ero milling. Ọja yii nlo gbigbelo agbara alailowaya, Imukuro iwulo fun awọn asopọ okun waya ibile, Awọn ikuna ti o kuna ti o ṣẹlẹ nipasẹ awọn kebulu, Imuyọ Fa okun Fakun, ororo ati kontaminu, ati ṣiṣe iṣẹ ni irọrun. Ifiwewe ọja naa pẹlu olugba ati aiṣe ti a alailowaya tẹhun. Olugba naa sopọ si ohun elo CNC nipasẹ okun USB kan, ati itanna itanna (ọwọ ni ọwọ) ti sopọ ati sọ pẹlu olugba nipasẹ imọ-ẹrọ gbigbe alailowaya. Oniṣẹ ni idaduro ọwọ naa ati pe o le yọkuro ninu awọn idiwọ asopọ ti okun waya orisun omi ati gbe larọwọto. Fun titobi-ara Gantry Millering, Awọn ipele cnc, irin-ajo ẹrọ irinṣẹ, Ige ati awọn ohun elo miiran, it brings great convenience and improves work efficiency.

Ṣe atilẹyin ọpọlọpọ awọn iyasọtọ eto bii Simemens, Metsubishi, Fatunu, Taiwanquindai, Baaoyuan, Fagan, Huzhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Lilo ẹgbẹ igbohunsafẹfẹ 433MHz, ijinna alailowaya jẹ 40 igun;
2. Gba iṣẹ Igbagbogbo Igbagbogbo Igbagbogbo ati lilo 32 Awọn eto ti awọn igi alailowaya ni akoko kanna laisi ipa ara wọn;
3. Ṣe atilẹyin bọtini iduro pajawiri ati 3 Awọn iṣan aṣa;
4. Atilẹyin awọn yiyan ipo ọpọ ti 6-ipo, 7-eegun, 8-eegun, 9-eegun, 10-Axis ati 12-axis, Pẹlu yiyan 3-iyara ati yiyan iyara 4-iyara ati awọn iyipada didan ṣe atilẹyin awọn oriṣi ifihan oriṣiriṣi bii ifasilẹ alakomeji, ojuami-si ojuami, koodu grẹy, patako ati bẹbẹ;
5. Atilẹyin 4V iyatọ pussi ilu, 24V poselo ile ati awọn iru ifihan puse miiran;
6. Apẹrẹ Agbara Agbara kekere, 2 Awọn batiri AA le ṣee lo fun diẹ sii ju 1 oṣu;
7. Ṣe atilẹyin fun eriali itẹsiwaju ti ita, Dara fun ọpọlọpọ awọn ẹrọ fifi sori ẹrọ ti ẹrọ, aridaju iduroṣinṣin ifihan;

Akiyesi:
1. Ipo ifihan ipo:
Imọlẹ ifihan (osi): Imọlẹ ifihan nigbagbogbo wa lori nigbati ọna ti o ṣiṣẹ, ati pe ko ni ina nigbati ko ba ṣiṣẹ;
Itaniji Itaniji Foltional (titọ): Nigbati agbara batiri jẹ kekere ju,ina itaniji tabi duro lori;
2. Mu bọtini ṣiṣẹ:
Lẹhin titẹ ati didimu bọtini ṣiṣẹ, yiyan awọn ipo ati awọn ami alailoye ti mu ṣiṣẹ, ati isokuso polusi jẹ wulo;
3. Bọtini Aṣa:
Bọtini laisi eyikeyi iṣẹ le ṣakoso abajade iyipada ti o baamu lori olugba;

Com1: Ebute ti o wọpọ fun ifihan ifihan ipo ti o wọpọ; le ti sopọ si ifihan gbangba gbangba 0-24v
Com12: Ebute ti o wọpọ ti 3 Awọn abajade Bọtini Aṣa;

*Yiyan axis ati mascification le ṣee yan nipasẹ sọfitiwia, ifaminsi tabi aaye-si aaye, Jọwọ kan si oṣiṣẹ fun awọn alaye

The final interpretation right of this product belongs to our company.

1.Ifihan ti iṣakoso latọna jijin

A.productuc compopọnimioni
Simemens Alakoso Alakoso Alakoso Alailowaya Alailowaya Awọn ẹya ara ẹrọ ọwọ meji: itanna beliti + olugba;

b.charcustize

*6 Awọn bọtini aṣa le ṣakoso 6 Awọn ohun elo yipada;
*Iboju ifihan ṣafihan PLC ti o baamu ni ibamu ni akoko gidi, and supports 6-axis display of real-time coordinates.

2.Ibi elo

1) Iwe afọwọkọ itanna ni asopọ si PLC nipasẹ olugba Ethernet

A.THETHELELLELELTELSTSTSTSTSTMITSTMITSTSTSTSTSTSTSTOTSTE INTER, ati olugba naa kọ awọn bọtini nipasẹ ẹrọ eto nẹtiwọọki USB USB DB; olugba naa ka data lati ṣafihan lati agbegbe DB ti a ṣe apẹrẹ, ati lẹhinna pada data naa si iboju ifihan ọwọ. Olumulo le ṣe adirẹsi ipilẹ ti kika ati kikọ DB agbegbe lori Welwheel, so that the handwheel can read and write the data in the DB area of the PLC.

b. Olugba ṣe atilẹyin Ilana S7 ilana S7. Kan si plc s7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

Ni ipo olupin, Olumulo naa tunto PLC ka ati kikọ adirẹsi nipasẹ sọfitiwia iṣeto WGP-iwoye;Lo ọpa ilana iṣeto asopọ PLC lati tunto olugba sinu ipo alabara. Lẹhin iṣeto, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Ohun elo kan pato

Ohun elo kan pato ti olugba alaabo ati Simen P PLC S7-200:

a. Bọtini lori awọn ọwọ ni ọwọ ni ibamu pẹlu iye ti agbegbe boolu ṣeto nipasẹ olumulo ni plc. Ti bọtini ti fi ọwọ ni a tẹ, Agbegbe bolu ti o baamu jẹ otitọ, ati nigbati o ti tu silẹ, O jẹ eke, ati adirẹsi ipilẹ ti agbegbe bool le ṣeto nipasẹ ọwọ ni ọwọ;

b. Oju ọwọ le ka iye agbegbe DB ni PLC. A2IS ti ni 4 Awọn baagi ti data ifihan, ati 6 Ati ni apapọ ti 24 awọn baagi. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Ifihan Ifihan

5.Pipe Opin ebute ati tabili apapo

6.Iwọn ifarahan

Eto aṣamubadọgba: Gbogbo awọn eto CNC pẹlu wiwo ọwọ

Ọja yii jẹ afọwọkọ itọsọna ti o lo pẹlu awọn irinṣẹ ẹrọ CNC. O ti lo ni awọn aaye bii awọn irinṣẹ ẹrọ CNC, Awọn ipele cnc, Awọn ile-iṣẹ ẹrọ ẹrọ,CNC eggraving ati awọn ero milling. Ọja yii nlo gbigbelo agbara alailowaya, Imukuro iwulo fun awọn asopọ okun waya ibile, Awọn ikuna ti o kuna ti o ṣẹlẹ nipasẹ awọn kebulu, Imuyọ Fa okun Fakun, ororo ati kontaminu, ati ṣiṣe iṣẹ ni irọrun. Ifiwewe ọja naa pẹlu olugba ati aiṣe ti a alailowaya tẹhun. Olugba naa sopọ si ohun elo CNC nipasẹ okun USB kan, ati itanna itanna (ọwọ ni ọwọ) ti sopọ ati sọ pẹlu olugba nipasẹ imọ-ẹrọ gbigbe alailowaya. Oniṣẹ ni idaduro ọwọ naa ati pe o le yọkuro ninu awọn idiwọ asopọ ti okun waya orisun omi ati gbe larọwọto. Fun titobi-ara Gantry Millering, Awọn ipele cnc, irin-ajo ẹrọ irinṣẹ, Ige ati awọn ohun elo miiran, it brings great convenience and improves work efficiency.

Ṣe atilẹyin ọpọlọpọ awọn iyasọtọ eto bii Simemens, Metsubishi, Fatunu, Taiwanquindai, Baaoyuan, Fagan, Huzhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Lilo ẹgbẹ igbohunsafẹfẹ 433MHz, ijinna alailowaya jẹ 40 igun;
2. Gba iṣẹ Igbagbogbo Igbagbogbo Igbagbogbo ati lilo 32 Awọn eto ti awọn igi alailowaya ni akoko kanna laisi ipa ara wọn;
3. Ṣe atilẹyin bọtini iduro pajawiri ati 3 Awọn iṣan aṣa;
4. Atilẹyin awọn yiyan ipo ọpọ ti 6-ipo, 7-eegun, 8-eegun, 9-eegun, 10-Axis ati 12-axis, Pẹlu yiyan 3-iyara ati yiyan iyara 4-iyara ati awọn iyipada didan ṣe atilẹyin awọn oriṣi ifihan oriṣiriṣi bii ifasilẹ alakomeji, ojuami-si ojuami, koodu grẹy, patako ati bẹbẹ;
5. Atilẹyin 4V iyatọ pussi ilu, 24V poselo ile ati awọn iru ifihan puse miiran;
6. Apẹrẹ Agbara Agbara kekere, 2 Awọn batiri AA le ṣee lo fun diẹ sii ju 1 oṣu;
7. Ṣe atilẹyin fun eriali itẹsiwaju ti ita, Dara fun ọpọlọpọ awọn ẹrọ fifi sori ẹrọ ti ẹrọ, aridaju iduroṣinṣin ifihan;

Akiyesi:
1. Ipo ifihan ipo:
Imọlẹ ifihan (osi): Imọlẹ ifihan nigbagbogbo wa lori nigbati ọna ti o ṣiṣẹ, ati pe ko ni ina nigbati ko ba ṣiṣẹ;
Itaniji Itaniji Foltional (titọ): Nigbati agbara batiri jẹ kekere ju,ina itaniji tabi duro lori;
2. Mu bọtini ṣiṣẹ:
Lẹhin titẹ ati didimu bọtini ṣiṣẹ, yiyan awọn ipo ati awọn ami alailoye ti mu ṣiṣẹ, ati isokuso polusi jẹ wulo;
3. Bọtini Aṣa:
Bọtini laisi eyikeyi iṣẹ le ṣakoso abajade iyipada ti o baamu lori olugba;

Com1: Ebute ti o wọpọ fun ifihan ifihan ipo ti o wọpọ; le ti sopọ si ifihan gbangba gbangba 0-24v
Com12: Ebute ti o wọpọ ti 3 Awọn abajade Bọtini Aṣa;

*Yiyan axis ati mascification le ṣee yan nipasẹ sọfitiwia, ifaminsi tabi aaye-si aaye, Jọwọ kan si oṣiṣẹ fun awọn alaye

The final interpretation right of this product belongs to our company.