Ohun elo kan pato fun Simen – Imọ-ẹrọ Wixhc https://www.wixhc.cn Industry Leader Wed, 05 Nov 2025 06:21:59 +0000 yo hourly 1 https://wordpress.org/?v=6.8.3 Fọwọsi Itọsọna itọnisọna Iwe afọwọkọ https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Ifihan ọja

Electronic handwheel is used for manual guidance, ipo, Ohun elo irinṣẹ, ati awọn iṣiṣẹ miiran lori awọn irinṣẹ ẹrọ CNC. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, igbaya, buttons, andother signals through communication.
2.Awọn ẹya iṣẹ iṣẹ
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 meters.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, Aṣayan axis, igbaya, and other information.
3. Bọtini Ipa Pajawiri, Yipada Io ifihan, and the hand wheel shutdown emergency stop is still valid.
4. Atilẹyin 6 Awọn bọtini aṣa, switch IO signals, and can output signals to the system through IO wiring or communication.
5. Atilẹyin 6 tabi 8 axis control, with switch IO signals that can be output to the system through IO wiring or communication.
6. Atilẹyin 3 tabi 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Ṣe atilẹyin BLUS ENGE, 100 Pulses / Yipada, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.

 

3. Awọn alaye ọja
Handwheel working power supply voltage DC24V/1A
Oluṣinṣin Agbara Agbara Agbara DC24V/1A
Receiver IO output load range DC24V
Hand wheel end cable length 10m
Receiver end cable length 1m
Receiver end network cable length 3m
Operating temperature -25℃<X<55℃
Anti-fall height 1m
Custom Button Quantity 6
Product dimensions 233*90.7*77.4（mm）

4.Ifihan iṣẹ ọja

Akiyesi:
Emergency stop button:
Tẹ bọtini iduro pajawiri, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.
After releasing the emergency stop, ITAN IM IO IPUPUPUPURT lori olugba ti wa ni pipade, and all functions of the handwheel are restored.
② Screen display:

 

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 Awọn bọtini aṣa, each corresponding to an IO output point on the receiver, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Tẹ ki o mu bọtini ṣiṣẹ, shake the pulse encoder, emit a pulse signal, and control the movement of the machine axis.
⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Aworan apẹrẹ ọja

6. Itọsọna fifi sori ọja ọja
6.1 Awọn igbesẹ Ami ọja
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Tọka si aworan apanirun wa ki o ṣe afiwe rẹ pẹlu ohun elo lori-aaye rẹ. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Lẹhin atunse olugba, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Olugba awọn ifitonileti fifi sori ẹrọ

6.3 Installation dimensions of aviation plugs

6.4 Olugba Wirgram Itọkasi Pipe
7.Awọn ilana isẹ ọja

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Yan igbekun: Switch the magnification switch and select the magnification level you need.
7. Igbese gbigbe: Tẹ ki o mu bọtini ṣiṣẹ, Yan yipada yiyan axis, select the magnification switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Tẹ bọtini iduro pajawiri, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled, release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
8.Apejuwe awoṣe ọja

① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : duro fun nọmba ti awọn ayipada yiyan ti axis, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Itọju
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Jọwọ yago fun sisọ, ja bo, ijagun, patako ati bẹbẹ. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Ti ko ba lo fun igba pipẹ, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.
11. Alaye Aabo

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Ti Tunṣe ba nilo, Jọwọ kan si olupese. Ti ibajẹ ba fa nipasẹ titunṣe ara, Olupese naa ko ni pese atilẹyin ọja

 

]]> Awọn ilana ti ko ni iyasọtọ fun awọn ilana iṣẹ Labẹ ti CNC inaro https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Ifihan ọja

The dedicated wireless remote contro for CNC vertical lathes is used for manual guidance, ipo, tool setting, and other operations on CNC vertical machine tools. Ọja yii tẹsiwaju ni imọ-ẹrọ ti ko le sọ alailowaya, eliminating the need for traditional spring wirae connections, Awọn ikuna ẹrọ ti o fa nipasẹ awọn kebulu, and eliminating the disadvantages of cable dragging and oil stains, making operation more convenient. It is widely applicable to various vertical lathes such as CNC vertical lathes, single-column vertical lathes, and double-column vertical lathes.It can also be adapted to a variety of CNC systems on the market, bii Simemens,
Metsubishi, Fatunu, and Syntec.

2. Awọn ẹya iṣẹ iṣẹ

1. Adopting 433 MHz wireless communication technology, pẹlu ijinna ti ko dara julọ ti 40 meters.
2.Adopting automatic frequency hopping function and using 32 sets of wireless remote controllers simultaneously, without affecting each other.
3. Bọtini Ipa Pajawiri, switch IO signal output.
4. Atilẹyin 2 customizable buttons, with switch-type IO signal output.
5. Atilẹyin -2 axis control.
6. Supports 3-level magnification control.
7. Support the enable button function, eyiti o le ṣejade awọn ifihan agbara / pa awọn ifihan agbara ati yiyan aarọ iṣakoso, isopọ jẹ ifosiwewe, ati Encoder.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Ṣe atilẹyin fun polusi, pẹlu alaye kan ti 100 pulses per revolution.
3. Awọn alaye ọja
Ṣiṣẹ foliteji ati lọwọlọwọ ti jijin alailowaya
3V / 14ma
Awọn alaye batiri 2 AA alkaline batiri, size 5
Itaniji foliteji kekere ti o latọna jijin < 2.3V
Oluṣinṣin Agbara Agbara Agbara DC5V-24V / A
Olugba pajawiri fifuye Iyọkuro Ac125V-1A / DC30V-2A
Olugba mu ki iwọn fifuye
Ac125V-1A / DC30V-2A
Olugba Aṣa Custops IWE IWE DC24V / 50MA
Ifiweranṣẹ Ayipada Ayipada Nkan DC24V / 50MA
Gbigbe Iwọn Irawọ fifẹ DC24V / 50MA
Agbara gbigbe ti iṣan ọwọ
15dbm
Olugba ngba ifamọra -100dbm
Irọrun Ibaraẹnisọrọ alailowaya 433Anshz ẹgbẹ igbohunsafẹfẹ
Ijinna ibaraẹnisọrọ Idena free ijinna ti 40 igun
Operation temperature -25℃ < X < 55℃
Anti fall height 1 (mita)
Custom button quantity 2
4. Ifihan iṣẹ ọja



Awọn akọsilẹ:

① Pulse encoder:
Tẹ ki o mu bọtini ṣiṣẹ, shake the pulse encoder, emit a pulse signal,and control the movement ofthe machine axis.
② Enable button:
Press either enable button on either side, and the two sets of enable IO outputs on the receiver will conduct. Release the enable button to disconnect the enable IO output; And before switching the axis selection magnification and shaking the handwheel,the enable button needs to be held down to be effective; This function can be cancelled through configuration software.

③ Indicator lights:
Left side light: power on light,the handwheel uses the axis to select OFF for power on, and this light stays on after power on;
Middle light: a signal light that lights up when operating any function ofthe handwheel, and does not light up when there is no operation;
Right side light: Itaniji Itaniji Foltional, low battery level,this lightflashes or stays on, battery needs to be replaced.

④ Emergency stop button:
Tẹ bọtini iduro pajawiri, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.

⑤ Magnification switch:
Press and hold the enable button to switch the magnification switch, which can switch the magnification controlled by the handwheel.

⑥ Axis selection switch (yipada agbara):
Press and hold the enable button to switch the axis selection switch, which can switch the movement axis controlled by the handwheel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Custom button:
Two custom buttons, each corresponding to an IO output point on the receiver.

5. Aworan apẹrẹ ọja

6. Itọsọna fifi sori ọja ọja
6.1 Awọn igbesẹ Ami ọja

1. Fi olugba sinu minisita itanna nipasẹ ipinnu naa lori ẹhin, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Tọka si aworan apanirun wa ki o ṣe afiwe rẹ pẹlu ohun elo lori-aaye rẹ. Connect the equipment to the receiver via cables.
3.Lẹhin olugba ni o wa titi, eriali ti ni ipese pẹlu olugba gbọdọ wa ni asopọ, ati opin ti ita ti yẹ ki o fi sori ẹrọ tabi gbe ni ita minisita itanna. O ti wa ni niyanju lati gbe lọ si oke ti minisita itanna fun ipa ifihan agbara ti o dara julọ. O ti wa ni idinamọ lati fi eriana ti a ko yan tabi gbe e si ẹgbẹ itanna itanna, as this may result in the signal being unusable.
4. L'akotan, tan-an yipada ọwọ ti paleti, and you can operate the machine remotely using the handwheel.

6.2 Olugba awọn ifitonileti fifi sori ẹrọ

6.3 Olugba Wirgram Itọkasi Pipe

7. Awọn ilana isẹ ọja
1. Agbara lori ẹrọ ati olugba. Awọn irufẹ olugba olugba. Fi batiri sori ẹrọ ninu ẹrọ alailowaya alailowaya, Ṣe aabo ideri batiri, ati
Tan-an yipada agbara ti ẹrọ alailowaya alailowaya. The handwheel’s battery level indicator light is on.
2. Yan awọn ilana ipoidojuko: Tẹ ki o mu bọtini ṣiṣẹ, Yipada iyipada asayan, and select the axis you want to operate.
3. Yan igbekun: Tẹ ki o mu bọtini ṣiṣẹ, toggle the magnification switch,and select the desired magnification level.
4. Igbese gbigbe: Tẹ ki o mu bọtini ṣiṣẹ, Yan yipada yiyan axis, select the magnification switch, and then rotate the pulse encoder. Rotate clockwise to move the
positive axis and counterclockwise to move the negative axis.
5. Tẹ ki o mu eyikeyi bọtini aṣa, and the corresponding button IO output of the receiver will be turned on. Release the button, and the output will be turned off.
6. Tẹ bọtini iduro pajawiri, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled,release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
7. Ti o ba ti fi ọwọ ko ṣiṣẹ fun akoko kan, it will automatically enter sleep mode to reduce power consumption. Nigbati o ti lo lẹẹkansi, the handwheel can be activated by pressing the enable button.
8. Ti a ko lo fi ọwọ silẹ fun igba pipẹ, it is recommended to switch the handwheel shaft to the OFF position, Pa a agbara ọwọ, and extend the battery life.

8. Apejuwe awoṣe ọja

① :ZTWGP ṣe aṣoju aworan hihan
②：Purse awọn paramita:
01: Tọkasi pe ifihan ti o ni itọsi jẹ kan, B; Pulsiot 30; pulse quantity 100PPR.
02：Nfihan pe awọn ifihan agbara ti o lagbara; Pulse folti 12V; pulse quantity 100PPR.
03：Nfihan pe awọn ifihan agbara ti o ni pulse jẹ a, B, A -, B -; Pulsiot 30; pulse quantity 100PPR.
04：Tọkasi awọn iwọn Circuit kekere, pẹlu awọn ifihan agbara iyọ ti a ati b;The number of pulses is 100PPR.
05：Tọkasi orisun orisun orisun PNP giga-giga, pẹlu awọn ifihan agbara iyọ ti a ati b; The number of pulses is 100PPR.
③：Nsoju nọmba ti awọn iyipada yiyan asa yipada, 2 duro fun 2 axes.
④：Duro fun iru ti yiyan asahan yipada, Awọn aṣoju aṣoju-si-aaye abajade satelaiti, and B represents encoded output signal.
⑤：Duro fun iru ifihan agbara pupọ, Awọn aṣoju aṣoju-si-aaye abajade satelaiti, and B represents encoded output signal.
⑥：Duro aṣoju awọn bọtini aṣa, 2 duro fun 2 custom buttons.
⑦：Duro fun ipese agbara fun eto ọwọ, ati 05 represents 5V power supply.
⑧：L ṣe aṣoju iwe osi (HOVE MIVE), ati r o duro fun iwe ti o tọ (Voiri ọbẹ ọbẹ).

9.Solusan si awọn iṣẹ-ṣiṣe ọja ọja

10. Ọja Ọja

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Jọwọ yago fun sisọ, ja bo, ijagun, patako ati bẹbẹ. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Ti ko ba lo fun igba pipẹ, Jọwọ fi ọwọ ni ọwọ ni ibi mimọ ati ailewu. Lakoko ibi ipamọ ati gbigbe, attention should be paid to moisture and shock resistance.

11. Alaye Aabo

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Ti Tunṣe ba nilo, Jọwọ kan si olupese. Ti ibajẹ ba fa nipasẹ titunṣe ara, Olupese naa ko ni pese atilẹyin ọja

]]> Fantuc igbẹhin alaifọwọyi alailowaya https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 Le 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Ifihan ọja

Ti a ko wulo itanna itanna ti a lo fun itọsọna Afowoyi, ipo, Ohun elo irinṣẹ,ati awọn iṣiṣẹ miiran lori awọn irinṣẹ ẹrọ CNC. Ọja yii tẹsiwaju ni imọ-ẹrọ ti ko le sọ alailowaya, imukuro asopọ okun waya ti ibi-giga, Awọn ikuna ẹrọ ti o fa nipasẹ awọn kebulu, Imukuro awọn alailanfani ti okun ti okun fa ati awọn abawọn epo, ati ṣiṣe iṣẹ ni irọrun. Awoṣe yii ti itanna itanna alailowaya jẹ ọwọ ifiṣootọ ifiṣootọ fun eto fanuc. Awọn ipoidojuko ifihan awọn ipoidojuko ni a fihan ni akoko gidi ni iboju iboju ti ọna ni ipilẹ Io-ọna asopọ, ati yiyan axis,igbaya, ati awọn ifihan agbara bọtini ti sopọ taara si eto nipasẹ Ilana ISO-asopọ, reducing wiring.

2. Awọn ẹya ọja
1. Awọn imọ-ẹrọ ti a ko gba 43MHz, Alailowaya ijinna jẹ 40 igun;
2. Gba iṣẹ Igbagbogbo Igbagbogbo Igbasilẹ Aifọwọyi Aifọwọyi, lo 32 Awọn eto ti awọn oludari latọna jijin alailowaya ni akoko kanna laisi ipa ara wọn;
3. Bọtini Ipa Pajawiri, Yipada Io ifihan, ti sopọ si eto nipasẹ io waring;
4. Atilẹyin 4 Awọn bọtini aṣa, Yipada Io ifihan, Ifihan iṣelọpọ si eto nipasẹ Ilana ISO-asopọ;
5. Ṣe atilẹyin Bọtini Iyipada iyara + ati bọtini -, Tẹ mọlẹ bọtini naa lati ropo iwe ọwọ ni ọwọ;
6. Ṣe atilẹyin Iṣakoso 6 -XIS, Yipada Io ifihan, Ifihan iṣelọpọ si eto nipasẹ Ilana ISO-asopọ;
7. Atilẹyin 1x,10x, 100Iṣakoso X . Ṣe atilẹyin ifihan L0 L0, ati awọn ami iṣalaye si eto nipasẹ Ilana asopọ Io-ọna asopọ;
8. Atilẹyin ṣiṣẹ iṣẹ bọtini, Sopọ si eto nipasẹ io waring, ati Iṣakoso Account mu ṣiṣẹ ni akoko kanna;
9. Ṣe atilẹyin BLUS ENGE, 100 Pulses / Circle, Wọle si Eto MPG MPG ni wiwo nipasẹ Autphone ab concodeg ifihan;

3.Awọn alaye ọja

4.Awọn ẹya Ọja

Awọn akọsilẹ:
Bọtini Duro Duro:
Tẹ bọtini iduro pajawiri, Awọn ito iṣẹ-ọna Io Meji, ati pe gbogbo awọn iṣẹ iranlọwọ ko wulo fun iduro pajawiri ni a tu silẹ, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

Ifihan ②Sreen:

Awọn bọtini ③verustom:
4 Awọn bọtini aṣa, Bọtini kọọkan ni ibamu si aaye orisun Io lori olugba, ti sopọ si eto nipasẹ iolink. Ti gbogboogbo, the ~ button is set as a high-speed button.
④axis yiyan yipada:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
Awọn bọtini ⑤shortcutt:
Tẹ bọtini ọna abuja "+" lati gbe ẹrọ siwaju, ki o tẹ bọtini gige kukuru "-" lati gbe ẹrọ naa ni odi.. This can replace turning the hand wheel to move the machine.
Bọtini itẹwe:
Tẹ mọlẹ. Ati awọn ẹgbẹ meji ti o jẹ awọn iyọrisi io lori olugba wa ni tan-an. Release the enable button and the enable IO output is disconnected.
⑦ratio yipada:
Switching the magnification switch can switch the magnification of handwheel control.
Imukuro ⑧pulse:
Tẹ mọlẹ
signal to control the movement of the machine axis.
} Ti yipada:
Handwheel power button.

5.Awọn ohun elo Awọn ẹya ẹrọ Intanẹẹti

6.Itọsọna fifi sori ọja ọja

6.1 Awọn igbesẹ Ami ọja

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Tọkasi si Aworan Wirgram Wiring Wa, Ṣe afiwe rẹ pẹlu ohun elo lori-aaye rẹ, ati sopọ
the equipment to the receiver via cables.
3. Lẹhin olugba naa wa ni titunse, eriali ti ni ipese pẹlu olugba gbọdọ wa ni asopọ,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
O ti wa ni niyanju lati gbe lọ si oke ti minisita itanna fun ipa ifihan agbara ti o dara julọ. Oun
ti ni idinamọ lati fi eriana ti a ko yan tabi gbe eriali sinu minisita itanna,
which may cause the signal to be unusable.
4.L'akotan, Tan agbara agbara ọwọ ni ọwọ ati pe o le ṣiṣẹ ẹrọ nipasẹ
handwheel remote control.

6.2 Olugba awọn ifitonileti fifi sori ẹrọ

6.3 Olugba Wirgram Itọkasi Pipe

7. Itọju ati abojuto

1. Jọwọ lo o ni agbegbe gbigbẹ pẹlu iwọn otutu deede ati titẹ lati faagun awọn
iṣẹ igbesi iṣẹ;
2. Jọwọ yago fun lilo rẹ ni awọn agbegbe ajeji gẹgẹ bi ojo ati awọn akara omi lati faagun
igbesi aye iṣẹ;
3. Jọwọ jẹ ki ifarahan ti ọwọ ti o mọ lati fa igbesi aye iṣẹ naa fa;
4. Jọwọ yago fun sisọ, ja bo, ijagun, patako ati bẹbẹ. Lati yago fun ibajẹ si awọn ẹya asọye
ninu inu ọwọ tabi fa awọn aṣiṣe konta;
5. Ti ko ba lo fun igba pipẹ, Jọwọ fi ọwọ ni ọwọ ni ibi mimọ ati ailewu;
6. Pay attention to moisture and shock during storage and transportation.

8. Alaye Aabo

1. Jọwọ ka awọn itọsọna naa daradara ṣaaju lilo. Ti a ko ṣe awọn oluṣele ti wa ni idinamọ lati
operating.
2. Jọwọ rọpo batiri ni akoko nigbati batiri naa kere ju lati yago fun awọn aṣiṣe ti o fa nipasẹ
insufficient power causing the handwheel to be unable to operate.
3. Ti Tunṣe ba nilo, Jọwọ kan si olupese. Ti ibajẹ ba fa nipasẹ atunṣe ara-ẹni,
the manufacturer will not provide warranty.

]]> Simemens igbẹhin ti ko ṣe iyasọtọ alailowaya alailowaya ẹrọ https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 Le 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Ifihan ti iṣakoso latọna jijin

A.productuc compopọnimioni
Simemens Alakoso Alakoso Alakoso Alailowaya Alailowaya Awọn ẹya ara ẹrọ ọwọ meji: itanna beliti + olugba;

b.charcustize

*Atilẹyin Simens Plc: S7-200 / -300 / -1200；Ṣe atilẹyin ifihan akoko gidi ti awọn iye ipoidojuko eto；
*Ijinlẹ gbigbe alailowaya ti ṣii 40 igun, Imọ-ẹrọ Iferi Igbohunsafẹfẹ Aifọwọyi, le lo 32 Awọn ohun elo ti ohun elo ni akoko kanna;
*Asopọfẹ itanna ni agbara nipasẹ 2 Awọn batiri AA ati le ṣee lo fun diẹ sii ju 30 Awọn ọjọ;
*Olugba ti ni ipese pẹlu eriali ti ita ti o wa lati jẹki ifihan agbara ati pe o rọrun lati fi sori ẹrọ;
*Atilẹyin mimọ itanna: ọkan 100pp 、Ọkan 6-iyara asa aṣayan yipada 、 Ọkan 3-iyara yipada;
*Awọn atilẹyin mimọ itanna 6 Awọn bọtini aṣa, ibaramu si adirẹsi PLC ti o baamu, eyiti o le ṣee ṣe atunṣe larọwọto;

*6 Awọn bọtini aṣa le ṣakoso 6 Awọn ohun elo yipada;
*Iboju ifihan ṣafihan PLC ti o baamu ni ibamu ni akoko gidi, and supports 6-axis display of real-time coordinates.

2.Ibi elo

Eto Iṣakoso latọna jijin ni lilo pupọ ni ọpọlọpọ awọn aaye CNC gẹgẹbi awọn aaye CNC bii ẹrọ Littraving eto, Ẹrọ CNC Miling, Ile-iṣẹ ẹrọ CNC, Ọpa ẹrọ Gantry, patako ati bẹbẹ

3. Ifihan si ilana iṣẹ

1) Iwe afọwọkọ itanna ni asopọ si PLC nipasẹ olugba Ethernet

A.THETHELELLELELTELSTSTSTSTSTMITSTMITSTSTSTSTSTSTSTOTSTE INTER, ati olugba naa kọ awọn bọtini nipasẹ ẹrọ eto nẹtiwọọki USB USB DB; olugba naa ka data lati ṣafihan lati agbegbe DB ti a ṣe apẹrẹ, ati lẹhinna pada data naa si iboju ifihan ọwọ. Olumulo le ṣe adirẹsi ipilẹ ti kika ati kikọ DB agbegbe lori Welwheel, so that the handwheel can read and write the data in the DB area of the PLC.

b. Olugba ṣe atilẹyin Ilana S7 ilana S7. Kan si plc s7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

Ni ipo olupin, Olumulo naa tunto PLC ka ati kikọ adirẹsi nipasẹ sọfitiwia iṣeto WGP-iwoye;Lo ọpa ilana iṣeto asopọ PLC lati tunto olugba sinu ipo alabara. Lẹhin iṣeto, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Ohun elo kan pato

Ohun elo kan pato ti olugba alaabo ati Simen P PLC S7-200:

a. Bọtini lori awọn ọwọ ni ọwọ ni ibamu pẹlu iye ti agbegbe boolu ṣeto nipasẹ olumulo ni plc. Ti bọtini ti fi ọwọ ni a tẹ, Agbegbe bolu ti o baamu jẹ otitọ, ati nigbati o ti tu silẹ, O jẹ eke, ati adirẹsi ipilẹ ti agbegbe bool le ṣeto nipasẹ ọwọ ni ọwọ;

b. Oju ọwọ le ka iye agbegbe DB ni PLC. A2IS ti ni 4 Awọn baagi ti data ifihan, ati 6 Ati ni apapọ ti 24 awọn baagi. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Ifihan Ifihan

5.Pipe Opin ebute ati tabili apapo

6.Iwọn ifarahan

 

 

]]>