未分類 – 維克斯技術 https://www.wixhc.cn 行業領袖 Wed, 05 Nov 2025 06:21:59 +0000 zh-HK hourly 1 https://wordpress.org/?v=6.8.5 有線電子手輪指示手冊 https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. 產品介紹

電子手輪係用嚟手動指導, 定位, 工具對齊, 同埋其他喺數控機床上面嘅操作. 呢款電子手輪型號係西門子實際顯示有線電子手輪. 手輪係透過網絡電纜連接到西門子系統嘅 X130 接口, 而系統座標係透過 S7 協定通訊，於手輪 LCD 屏幕上讀取及顯示. 手輪亦可以控制系統軸選擇, 放大, 掣, andother signals through communication.
2.產品功能功能
1. 用 6 核心航空插頭電纜連接, 有手輪電纜長度係 10 meters.
2. 手輪屏幕可以顯示系統工件座標, 機械座標,飼料率, 軸選擇, 放大, and other information.
3. 支援緊急停止掣, 開關 IO 訊號輸出, and the hand wheel shutdown emergency stop is still valid.
4. 支持 6 自訂掣, 切換 IO 訊號, and can output signals to the system through IO wiring or communication.
5. 支持 6 或者 8 軸控制, with switch IO signals that can be output to the system through IO wiring or communication.
6. 支持 3 或者 4 放大控制水平, with switch IO signals that can be output to the system through IO wiring or communication.
7. 支援脈衝編碼器, 100 脈衝 / 轉, can output signals to the system through AB pulse wiring.
8. 支持西門子 S7 協定和西門子 828D, 840DSL, ONE and other model systems.

 

3. 產品規格
手輪工作電源電壓 DC24V / 1A
接收器電源電壓 DC24V / 1A
接收器 IO 輸出負載範圍 DC24V
手輪端電纜長度 10m
接收器端電纜長度 1m
接收器端網絡電纜長度 3m
操作溫度 -25℃<X<55℃
反跌高度 1m
定制按鈕數量 6
產品尺寸 233*90.7*77.4⋯ ⋯ mm ）

4.產品功能介紹

筆記薄:
緊急停止掣:
按緊急停止按鈕, 而接收器上嘅兩組緊急停止 IO 輸出就會斷開, and all functions of the handwheel will be invalid.
發佈緊急站後, 緊急停止 IO 輸出係接收器上關閉, and all functions of the handwheel are restored.
② 螢幕顯示:

 

PLC: 0000 表示網絡電纜未連接, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 代表對手輪嘅系統資料成功寫入, PLC: 0001 represents successful connection to the computer.
③ 自訂掣:
6 自訂掣, 每個對應接收器上嘅 IO 輸出點, also connected to the system through communication.
x 軸選擇開關:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ 啟用掣:
按住同按住兩邊啟用掣，透過搖搖欲墜，啟動脈衝編碼器. 而接收器上嘅兩個群組令到 IO 輸出可以進行, release the enable button to enable IO output to disconnect.
⑥ 放大開關:放大開關可以切換放大
controlled by the handwheel.
⑦ 脈衝編碼器:
按住啟用掣, 搖動脈搏編碼器, 發出脈衝訊號, and control the movement of the machine axis.
⑧ 手輪電纜:

電纜連接手輪和接收器, 航空插頭, used for handwheel power supply and communication.

5. 產品配件圖

6. 產品安裝指南
6.1 產品安裝步驟
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. 請參閱我哋嘅接收器接線圖，然後同你嘅現場設備比較. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. 修正咗接收器之後, 安裝航空插頭底座係面板上嘅手輪開口位置, 同埋將底座嘅另一端插入接收器上嘅手輪接口. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 接收器安裝尺寸

6.3 航空插頭嘅安裝尺寸

6.4 接收器接線參考圖
7.產品營運指示

1. 當接收器開開，接收器嘅工作指示燈閃爍, 用網絡電纜連接接收器去電腦, 設定電腦嘅固定 IP 地址, 並使用網絡配置工具軟件，設定手輪函數之網絡參數. 對於特定嘅設定方法, 參考嘅係 “LXWGP-ETS 有線手輪使用手冊”.

2.接收器設定好之後, 呢個系統需要編程一個 PLC 程式. 請參考 “LXWGP-ETS 不同西門子數值控制係統設定方法” and PLC program routine materials for details.

3.完成上述設定後, 帶接收器去機電櫃安裝. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.完成上述設定後, 帶接收器去機電櫃安裝. 從電腦拉出網絡電纜，然後插入系統嘅 X 接口. Connect the receiver power supply and pulse line.
5. 選擇軸選擇: Switch the axis selection switch and select the axis you want to operate on.
6. 揀放大: Switch the magnification switch and select the magnification level you need.
7. 移動軸: 按住啟用掣, 選擇軸選擇開關, 選取放大開關, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. 按住任何自訂掣，開啟接收器中相應掣嘅 IO 輸出, and release the button to turn off the output.
9. 按緊急停止按鈕, 對應嘅緊急停止 IO 輸出會斷開, 手輪功能會停用, 發佈緊急停止掣, 緊急停止 IO 輸出會關閉, and the handwheel function will be restored.
8.產品模型描述

① LXWGP 代表有線外觀風格, 同埋接收器通訊介面
is an Ethernet interface.
② : Represents Siemens system specific.
③ : 代表軸選擇開關數目, 代表軸, 同埋代表
axes.
④ : 代表軸選擇同放大訊號嘅類型, A 代表
點對點輸出訊號, and B represents encoded output signal.

9.產品好麻煩拍攝

10.維護
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. 請避免擠壓, 跌咗, 碰撞, 等等. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. 如果唔用好耐, 請將手輪儲存於乾淨安全嘅地方, attention should be paid to moisture and shock resistance.
11. 安全資訊

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. 如果手輪發生任何異常情況, 請立即停止使用，並排除故障排除. 排除故障之前, 禁止再次使用故障嘅手輪，以免由未知嘅手輪故障引起嘅安全事故;
3. 如果需要維修, 請聯絡廠商. 如果損壞係由自我修復引起, 廠商唔會提供保養

 

]]>