1.Isingeniso Somkhiqizo

2.Izici zomkhiqizo

Cindezela ubambe inkinobho yokunika amandla, then toggling the axis selection switch can control the movement of axis .Press and hold the enable button, then toggle the axis selection switch to switch the motion axis controlled by the remote control. Toggle the switch from the OFF position to any axis position, and the remote control will power on automatically.

④ Pulse Encoder:

Press and hold the enable button and rotate the pulse encoder, it will output pulse signals to control the movement of the machine axis.

⑤ LCD Display Screen:

5. Product Accessories Diagram

 

6. Umhlahlandlela Wokufakwa Komkhiqizo

6.1 Izinyathelo Zokufaka Umkhiqizo

1. Install the receiver in the electrical cabinet via the buckle on its back, or mount it inside the electrical cabinet through the screw holes at the four corners of the receiver.

2. Bheka umdwebo wethu we-wiring owemukelayo, Qhathanisa nemishini yakho esendaweni, and connect the equipment to the receiver with cables.

3. After the receiver is fixed in place, install the supporting antenna of the receiver properly. Mount or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for optimal signal performance. Do not leave the antenna uninstalled or place it inside the electrical cabinet; ngaphandle kwalokho, signal failure may occur.

4. Ekugcineni, turn on the remote control power switch, then you can remotely operate the machine via the remote control.

6.2 Receiver Installation Dimensions

6.3 I-Receiver Wiring Reference Diagram

7. Imiyalo yokusebenza komkhiqizo

1. Amandla emshinini kanye nomamukeli. The receiver operation indicator flashes. After the wireless electronic remote control is fully charged, toggle it from the OFF gear to the X-axis gear, and the remote control display lights up.

2. Select the axis : Cindezela ubambe inkinobho yokunika amandla, toggle the axis selection switch to select the axis to be operated.

3. Select the magnification: Cindezela ubambe inkinobho yokunika amandla, toggle the magnification switch to select the required magnification gear.

4. Axis movement: Cindezela ubambe inkinobho yokunika amandla, select the axis selection switch and the magnification switch, then rotate the pulse encoder. Rotate clockwise to move the axis in the positive direction, and rotate counterclockwise to move the axis in the negative direction.

5. Cindezela ubambe noma iyiphi inkinobho yangokwezifiso, the corresponding button IO output of the receiver will turn on; release the button, and the output will turn off.

6. Cindezela inkinobho yokumisa eziphuthumayo, the corresponding emergency stop IO output of the receiver disconnects and the remote control function becomes invalid. Release the emergency stop button, the emergency stop IO output closes and the remote control function is restored.

7. If the wireless remote control is not operated for a period of time, izongena ngokuzenzakalelayo kumodi yokulala ukuze inciphise ukusetshenziswa kwamandla. It can be used normally again by pressing the enable button again.

8.If the wireless remote control is not used for a long time, turn the axis switch to OFF to turn off the power and extend battery life

8. Incazelo yemodeli yomkhiqizo

①：UWGP stands for appearance style.

②：Pulse Output Parameters：

05: Kubonisa okuphumayo kwe-PNP ye-PNP, ngezimpawu zokuphuma ze-pulse ze-a no b; The number of pulses is 100PPR.

③：Represents the axis selection switch quantity; 6 stands for 6 izembe, 7 stands for 7 izembe, and so on.

④: Represents the signal type of the axis selection switch.A stands for point-to-point output signal, and B stands for encoder output signal.

⑤: Represents the signal type of the magnification switch.A stands for point-to-point output signal, and B stands for encoder output signal.

⑥: Imele inombolo yezinkinobho zangokwezifiso; 3 corresponds to 6 custom buttons.

⑦: Represents the power supply for the system remote control. 05 stands for 5V power supply, na- 24 stands for 24V power supply.

⑧: Represents the contact charging mode. It starts charging automatically when placed back on the charging base.

9. Ukuxazulula inkinga yomkhiqizo

 

10. Maintenance and upkeep

1. Please use it in a dry environment at room temperature and pressure to extend its service life.

2. Please avoid using in abnormal environments such as rain and water to extend the service life.

3. Please keep the appearance of the remote control clean to extend its service life.

4. Please avoid crushing, dropping, or bumping, njll. to prevent damage to the precision components inside the remote control or accuracy errors.

5. Uma kungasetshenziswanga isikhathi eside, please store the remote control in a clean and safe place.

6. Avoid moisture and shock during storage and transportation.

1. Isingeniso Somkhiqizo

I-Handwheel Working Power Supply Voltage	DC24V / 1A
Amandla wokuthola amandla okuthola amandla	DC24V / 1A
I-Receiver Io Output Load Range	I-DC24V
Ubude be-Hand Wheel End Feme	10uhlobo
I-Receiver End Prece ubude	1uhlobo
I-Receiver ENT Network cable ubude ubude	3uhlobo
Ukushisa okusebenzayo	-25℃<X<55℃
Ukuphakama kwe-Anti-Fall	1uhlobo
Inani lenkinobho ngokwezifiso	6
Ubukhulu Bomkhiqizo	233*90.7*77.4(Mm)

4.Isingeniso somsebenzi wesingeniso

Incwajana:

Inkinobho Yezimo Eziphuthumayo:

Cindezela inkinobho yokumisa eziphuthumayo, Futhi amasethi amabili okuma okuma eziphuthumayo okuphumayo ku-owemukelayo azonqanyulwa, and all functions of the handwheel will be invalid.

Ngemuva kokukhipha isitobha esiphuthumayo, Ukukhishwa okuphuthumayo okuphuthumayo IO okuphumayo kuvaliwe, and all functions of the handwheel are restored.

② Isibuko ②:

6.2 Ubukhulu bokufaka

6.3 Ubukhulu bokufaka kwama-plugs endiza

6.4 I-Receiver Wiring Reference Diagram
7.Imiyalo yokusebenza komkhiqizo

1. Lapho umuntu owemukelayo enamandla futhi esebenza ngokukhanya kwesikhombisi sokwamukela, Xhuma owamukelayo kwikhompyutha ngentambo yenethiwekhi, Setha ikheli le-IP elinqunyelwe lekhompyutha, Futhi sebenzisa isoftware yokucushwa kwenethiwekhi ukusetha amapharamitha wenethiwekhi womsebenzi wesandla. Ngezindlela ezithile zokusetha, Bheka ku “I-LXWGP-ETS Wired Mand Wheary Manual”.

2.Ngemuva kokuthi kusungulwe lomukeli, Uhlelo ludinga ukuhlela uhlelo lwe-PLC. Sicela ubheke ku- “I-LXWGP-ETS ehlukene ama-Nokia Naturence Cort System Ukubeka Izindlela” and PLC program routine materials for details.

3.Ngemuva kokuqeda lezi zilungiselelo ezingenhla, Thatha owemukelayo kwikhabethe elikagesi lomshini bese ulifaka. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.Ngemuva kokuqeda lezi zilungiselelo ezingenhla, Thatha owemukelayo kwikhabethe elikagesi lomshini bese ulifaka. Khipha ikhebula lenethiwekhi kwikhompyutha bese ulifaka kwi-X isikhombimsebenzisi sohlelo. Connect the receiver power supply and pulse line.

5. Khetha Ukukhetha Kwe-Axis: Switch the axis selection switch and select the axis you want to operate on.

6. Khetha Ukukhulisa: Switch the magnification switch and select the magnification level you need.

7. Ukuhambisa i-AXX: Cindezela ubambe inkinobho yokunika amandla, Khetha ukushintshwa kokukhethwa kwe-axisi, Khetha ukushintshwa kokukhulisa, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.

8. Cindezela ubambe noma iyiphi inkinobho yangokwezifiso ukuvula ukuphuma kwe-IO yenkinobho ehambisanayo ku-Outver, and release the button to turn off the output.

9. Cindezela inkinobho yokumisa eziphuthumayo, Ukukhishwa okuhambisanayo okuphuthumayo okuphumayo okuphumayo kwalowo owemukelayo kuzonqanyulwa, Umsebenzi wesandla uzokhutshazwa, Khipha inkinobho yokumisa eziphuthumayo, Ukukhishwa okuphuthumayo okuphumayo okuzovalwa, and the handwheel function will be restored.

8.Incazelo yemodeli yomkhiqizo

9.Ukudutshulwa kwenkinga yomkhiqizo

1.Isingeniso Somkhiqizo

2. Izici ezisebenzayo zomkhiqizo

3. Ukucaciswa komkhiqizo

I-voltage esebenzayo kanye ne-current yesilawuli kude esingenantambo	3V/14MA
Ukucaciswa kwebhethri	2 AA amabhethri e-alkaline, size 5
Ibanga le-alamu ye-voltage ephansi yesilawuli kude esingenantambo	< 2.3V
Amandla wokuthola amandla okuthola amandla	I-DC5V-24V/A
Ibanga lokulayisha kokuphuma kwesimo esiphuthumayo somamukeli	I-AC125V-1A/DC30V-2A
Isamukeli sinikeze amandla ububanzi bokulayisha okukhiphayo	I-AC125V-1A/DC30V-2A
Ibanga lokulayisha lokukhipha inkinobho yangokwezifiso	I-DC24V/50mA
Ibanga lokulayisha lokuphumayo kokukhetha kwe-eksisi yesitholi	I-DC24V/50mA
Ububanzi bokulayisha kokukhuliswa komamukeli	I-DC24V/50mA
Amandla okudlulisa wetheminali ephathwa ngesandla	15dBm
Umamukeli uthola ukuzwela	-100dBm
Imvamisa yokuxhumana okungenantambo	433Ibhendi yefrikhwensi ye-MHz
Ibanga lokuxhumana okungenantambo	Ibanga elingenamgoqo lika- 40 amadesi
Izinga lokushisa lokusebenza	-25℃ < X < 55℃
Ukuphakama kwe-Anti ukuwa	1 (umshini)
Ubuningi benkinobho yangokwezifiso	2

4. Isingeniso somsebenzi wesingeniso

Amanothi:

① Isishumeki se-Pulse:
Cindezela ubambe inkinobho yokunika amandla, Nyakazisa i-Encoder ye-Pulse, khipha isinali yokushayela,and control the movement ofthe machine axis.
② Inkinobho yokunika amandla:
Cindezela inkinobho yokunika amandla kunoma yiluphi uhlangothi, futhi amasethi amabili okunika amandla ukuphuma kwe-IO kumamukeli azoqhuba. Dedela inkinobho yokunika amandla ukuze unqamule okukhiphayo kwe-IO; Futhi ngaphambi kokushintsha ukukhuliswa kokukhethwa kwe-eksisi nokunyakazisa isondo lesandla,inkinobho yokunika amandla idinga ukubanjwa ukuze isebenze; This function can be cancelled through configuration software.

③ Izibani zenkomba:
Ukukhanya ohlangothini lwesobunxele: amandla ekukhanyeni,isondo lesandla lisebenzisa i-eksisi ukuze ukhethe UKUVALA ukuze uvule amandla, futhi lokhu kukhanya kuhlala kukhanya ngemva kokukhanyisa;
Ukukhanya okuphakathi: isibani sesignali esikhanyisa lapho usebenzisa noma yimuphi umsebenzi wesondo lesandla, futhi ayikhanyi uma kungekho msebenzi;
Ukukhanya ohlangothini lwesokudla: Ukukhanya okuphansi kwe-alamu, izinga lebhethri eliphansi,lokhu kukhanya kukhanya noma kuhlale kuvuliwe, battery needs to be replaced.

④ Inkinobho yokumisa isimo esiphuthumayo:
Cindezela inkinobho yokumisa eziphuthumayo, Futhi amasethi amabili okuma okuma eziphuthumayo okuphumayo ku-owemukelayo azonqanyulwa, and all functions of the handwheel will be invalid.

⑤ Iswishi yokukhulisa:
Cindezela futhi ubambe inkinobho yokunika amandla ukuze ushintshe iswishi yokukhulisa, which can switch the magnification controlled by the handwheel.

⑥ Iswishi yokukhetha i-eksisi (ukushintshwa kwamandla):
Cindezela futhi ubambe inkinobho yokunika amandla ukuze ushintshe iswishi yokukhetha i-eksisi, engashintsha i-eksisi yokunyakaza elawulwa yi-handwheel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Inkinobho yangokwezifiso:
Izinkinobho ezimbili zangokwezifiso, each corresponding to an IO output point on the receiver.

5. Umdwebo wesengezo somkhiqizo

6. Umhlahlandlela Wokufakwa Komkhiqizo
6.1 Izinyathelo Zokufaka Umkhiqizo

1. Faka ukwamukela kwikhabhinethi kagesi ngebhande ngemuva, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Bheka umdwebo wethu we-wiring owemukelayo bese uyiqhathanisa nemishini yakho esendaweni. Connect the equipment to the receiver via cables.
3.Ngemva kokuba umamukeli elungiswe kahle, I-antenna ifakwe owemukelayo kumele axhunywe, futhi ingxenye engaphandle ye-antenna kufanele ifakwe noma ibekwe ngaphandle kwekhabhinethi kagesi. Kunconywa ukuyibeka phezulu kwekhabethe kagesi ngomphumela omuhle kakhulu wesiginali. Akuvunyelwe ukushiya uthi lwe-antenna lungaxhumekile noma ulubeke ngaphakathi kwekhabhinethi kagesi, as this may result in the signal being unusable.
4. Ekugcineni, vula inkinobho yamandla yesondo lesandla, and you can operate the machine remotely using the handwheel.

6.2 Ubukhulu bokufaka

6.3 I-Receiver Wiring Reference Diagram

7. Imiyalo yokusebenza komkhiqizo
1. Amandla emshinini kanye nomamukeli. Isibani senkomba yokusebenza komamukeli siyaphazima. Faka ibhethri ku-handwheel ye-elekthronikhi engenantambo, vikela ikhava yebhethri, na-
vula iswishi yamandla yesondo lesandla le-elekthronikhi elingenantambo. The handwheel’s battery level indicator light is on.
2. Khetha i-axis yokuxhumanisa: Cindezela ubambe inkinobho yokunika amandla, shintsha inkinobho yokukhetha i-eksisi, and select the axis you want to operate.
3. Khetha Ukukhulisa: Cindezela ubambe inkinobho yokunika amandla, shintsha iswishi yokukhulisa,and select the desired magnification level.
4. Ukuhambisa i-AXX: Cindezela ubambe inkinobho yokunika amandla, Khetha ukushintshwa kokukhethwa kwe-axisi, Khetha ukushintshwa kokukhulisa, bese uzungezisa isifaki khodi sokushaya kwenhliziyo. Zungezisa ngokwewashi ukuze uhambise i
positive axis and counterclockwise to move the negative axis.
5. Cindezela ubambe noma iyiphi inkinobho yangokwezifiso, futhi inkinobho ehambisanayo okukhiphayo kwe-IO kowamukelayo kuzovulwa. Dedela inkinobho, and the output will be turned off.
6. Cindezela inkinobho yokumisa eziphuthumayo, Ukukhishwa okuhambisanayo okuphuthumayo okuphumayo okuphumayo kwalowo owemukelayo kuzonqanyulwa, Umsebenzi wesandla uzokhutshazwa,Khipha inkinobho yokumisa eziphuthumayo, Ukukhishwa okuphuthumayo okuphumayo okuzovalwa, and the handwheel function will be restored.
7. Uma isandla sesandla singasebenzi isikhathi esithile, izongena ngokuzenzakalelayo kumodi yokulala ukuze inciphise ukusetshenziswa kwamandla. Lapho isetshenziswa futhi, the handwheel can be activated by pressing the enable button.
8. Uma isandla sesandla asisetshenziswa isikhathi eside, kunconywa ukuthi ushintshe i-handwheel shaft endaweni ye-OFF, cisha amandla esandla, and extend the battery life.

8. Incazelo yemodeli yomkhiqizo

① :I-ZTWGP imele isitayela sokubukeka
②：Amapharamitha okukhishwa kwe-Pulse:
01: Ibonisa ukuthi isignali yokuphuma kwe-pulse ingu-A, B; I-Pulse Voltage 5v; pulse quantity 100PPR.
02：Ibonisa ukuthi amasiginali okukhipha ishayela ngu-A no-B; I-Pulse voltage 12V; pulse quantity 100PPR.
03：Okubonisa ukuthi amasiginali okukhipha i-pulse ngu-A, B, A -, B -; I-Pulse Voltage 5v; pulse quantity 100PPR.
04：Kukhombisa okukhishwe okuphezulu kwe-NPN okuvulekile kwe-NPN, ngezimpawu zokuphuma ze-pulse ze-a no b;The number of pulses is 100PPR.
05：Kubonisa okuphumayo kwe-PNP ye-PNP, ngezimpawu zokuphuma ze-pulse ze-a no b; The number of pulses is 100PPR.
③：Imele inani lamaswishi okukhetha i-eksisi, 2 imele 2 axes.
④：Imele uhlobo lwesiginali yokukhetha i-eksisi, Isiginali yokuphuma ekhomba iphuzu, and B represents encoded output signal.
⑤：Imele uhlobo lwesignali yokuphindaphinda, Isiginali yokuphuma ekhomba iphuzu, and B represents encoded output signal.
⑥：Imele inombolo yezinkinobho zangokwezifiso, 2 imele 2 custom buttons.
⑦：Imele ukunikezwa kwamandla kwesondo lesandla lesistimu, na- 05 represents 5V power supply.
⑧：L imele ikholomu yesokunxele (umbambi wommese kwesokunxele), futhi u-R umele ikholomu ekwesokudla (umbambi wommese wesokudla).

9.Isixazululo Sokungasebenzi Komkhiqizo

1.Isingeniso Somkhiqizo

Kusetshenziselwa i-handwheel ye-wireless electronic kusetshenziselwa ukuholwa yincwadi, ukubeka isikhundla, ukuhambisana kwamathuluzi,neminye imisebenzi kumathuluzi womshini we-CNC. Lo mkhiqizo wamukela ubuchwepheshe bokuhambisa okungenantambo, Ukuqeda uxhumano lwentambo yendabuko yentwasahlobo, Ukunciphisa ukwehluleka kwemishini okubangelwa yizintambo, ukuqeda ububi bokudonsa ikhebula namabala kawoyela, nokwenza ukusebenza kube lula ngokwengeziwe. Le modeli ye-handwheel ye-elekthronikhi engenantambo iyisondo elizinikele lohlelo lweFanuc. Izixhumanisi zesistimu ye-Fanuc ziboniswa ngesikhathi sangempela esikrinini sesondo lesandla ngephrothokholi ye-IO-LINK, kanye nokukhetha kwe-eksisi,ukukhunyusisa, namasignali enkinobho axhunywe ngokuqondile ohlelweni ngephrothokholi ye-IO-LINK, reducing wiring.

2. Izici zomkhiqizo
1. Akwamukela ubuchwepheshe bokuxhumana okungenantambo abangama-433mhz, Ibanga elingenantambo le-Wireless 40 amadesi;
2. Adopt authomathokhi funteenchling umsebenzi we-hopping, umsebenzi 32 amasethi ezilawuli kude ezingenazintambo ngesikhathi esisodwa ngaphandle kokuthintana;
3. Sekela inkinobho yokumisa eziphuthumayo, Shintsha ukuphuma kwesiginali ye-IO, ixhunywe ohlelweni ngokusebenzisa izintambo ze-IO;
4. Singatha 4 izinkinobho ngokwezifiso, shintsha isignali ye-IO, isignali yokuphumayo ohlelweni ngephrothokholi ye-IO-LINK;
5. Sekela inkinobho yokunyakaza okusheshayo + kanye nenkinobho -, cindezela bese ubamba inkinobho ukufaka esikhundleni isondo lesandla ukuhambisa umshini;
6. Sekela Ukulawulwa Kwe-6-axis, shintsha isignali ye-IO, isignali yokuphumayo ohlelweni ngephrothokholi ye-IO-LINK;
7. Sekela i-1X,10x, 100X control . I-Switch switch ye-l0 isignali, futhi ikhipha amasignali ohlelweni ngephrothokholi ye-IO-LINK;
8. Ukusekela vumela umsebenzi wenkinobho, xhuma kusistimu ngokusebenzisa izintambo ze-IO, futhi lawula isifaki khodi sinike amandla ngesikhathi esifanayo;
9. Sekela i-Pulse Encoder, 100 imithambo/umbuthano, Finyelela isikhombimsebenzisi esibonakalayo se-MPG ngokukhipha isiginali encodi e-AB;

3.Ukucaciswa komkhiqizo

4.Izici zomkhiqizo

Amanothi:
Inkinobho yokumisa inhloko:
Cindezela inkinobho yokumisa eziphuthumayo, Imiphumela emibili yokumisa izimo eziphuthumayo ye-IO etholwayo iyanqanyulwa, Futhi yonke imisebenzi yakwaWhehli avumelekile.Emva kokuma okuphuthumayo kukhishwa, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

Isibonisi se-②Screen:

Izinkinobho ze-③Custom:
4 izinkinobho ngokwezifiso, inkinobho ngayinye ihambelana ne-IO Output Point kulowo owamukelayo, Ixhunywe ohlelweni nge-Iolink. Ngokujwayelekile, the ~ button is set as a high-speed button.
Ukushintsha kokukhethwa kwe-④axis:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
Izinkinobho ze-⑤Shortcut:
Cindezela inkinobho yesinqamuleli “+ ”ukuze uhambise umshini phambili, bese ucindezela inkinobho yesinqamuleli "-" ukuhambisa umshini kabi. This can replace turning the hand wheel to move the machine.
⑥Inkinobho yokunika amandla:
Cindezela futhi ubambe noma iyiphi yezinkinobho zokunika amandla kuzo zombili izinhlangothi bese unyakazisa isishumeki se-pulse ukuze sisebenze kahle. Futhi amaqembu amabili wokunika amandla ukuphuma kwe-IO kumamukeli avuliwe. Release the enable button and the enable IO output is disconnected.
⑦ Iswishi yesilinganiso:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Isifaki khodi se-Pulse:
Cindezela ubambe inkinobho yokunika amandla bese unikine i-Encoder ye-Pulse ukuthumela ishayela
signal to control the movement of the machine axis.
⑨Iswishi yamandla:
Handwheel power button.

5.Umdwebo Wezesekeli Yomkhiqizo

6.Umhlahlandlela Wokufakwa Komkhiqizo

6.1 Izinyathelo Zokufaka Umkhiqizo

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Bheka umdwebo wethu we-wiring owemukelayo, Qhathanisa nemishini yakho esendaweni, bese uxhuma
the equipment to the receiver via cables.
3. Ngemuva kokuthi owemukelayo elungisiwe, I-antenna ifakwe owemukelayo kumele axhunywe,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Kunconywa ukuyibeka phezulu kwekhabethe kagesi ngomphumela omuhle kakhulu wesiginali. Yona
anqatshelwe ukushiya i-antenna engaxhunyiwe noma abeke i-antenna ngaphakathi kwekhabethe likagesi,
which may cause the signal to be unusable.
4.Ekugcineni, Vula i-Manzi Shintra Power futhi ungasebenza umshini ngo
handwheel remote control.

6.2 Ubukhulu bokufaka

6.3 I-Receiver Wiring Reference Diagram

7. Ukulungiswa nokunakekelwa

1. Sicela uyisebenzise endaweni eyomile enamazinga okushisa ajwayelekile nengcindezi yokwelula
Impilo Yenkonzo;
2. Sicela ukugweme ukuyisebenzisa ezindaweni ezingavamile njengemvula namabhamuza amanzi ukuze inwebe
Impilo Yenkonzo;
3. Sicela ugcine ukubukeka kwesondo lesandla kuhlanzekile ukuze unwebe impilo yesevisi;
4. Sicela ugweme ukuncipha, ukuwa, lapho kuqhuma, njll. ukuvimbela ukulimala ezingxenyeni eziqondile
ngaphakathi kwesondo lesandla noma abangele ukunemba amaphutha;
5. Uma kungasetshenziswanga isikhathi eside, Sicela ugcine i-handwheel endaweni ehlanzekile nephephile;
6. Pay attention to moisture and shock during storage and transportation.

8. Ulwazi Lokuphepha

1. Sicela ufunde imiyalo ngokucophelela ngaphambi kokusebenzisa. Ochwepheshe abavunyelwe anqatshelwe
operating.
2. Sicela ushintshe ibhethri ngesikhathi lapho ibhethri liphansi kakhulu ukugwema amaphutha adalwe
insufficient power causing the handwheel to be unable to operate.
3. Uma ukulungiswa kudingeka, Sicela uxhumane nomenzi. Uma umonakalo ubangelwa ukuzilungisa,
the manufacturer will not provide warranty.

1.Isingeniso Somkhiqizo

Kusetshenziselwa i-handwheel ye-wireless electronic kusetshenziselwa ukuholwa yincwadi, ukubeka isikhundla, Ukuhlelwa kwamathuluzi kanye
Eminye imisebenzi yamathuluzi womshini we-CNC. Lo mkhiqizo wamukela ubuchwepheshe bokuhambisa okungenantambo,
Ukuqeda uxhumano lwentambo yendabuko yentwasahlobo, Ukunciphisa ukwehluleka kwemishini okubangelwa yizintambo,
Ukuqeda ububi bokudonsela ikhebula, amabala kawoyela, njll., futhi ilula kakhulu
hlinza. Kusetshenziswa kabanzi kumathuluzi omshini we-CNC anjengezikhungo zemishini ye-gantry, ugqoko
Ama-lathes mpo, Imishini yokucubungula amagiya e-CNC, futhi ingashintshwa nezinhlobonhlobo ze-CNC
izinhlelo emakethe, njenge-Nokia, Mitsubishi, Unonandela, Syntec nolunye uhlelo lwe-CNC
brands.

2.Izici zomkhiqizo

1. Akwamukela ubuchwepheshe bokuxhumana okungenantambo abangama-433mhz, Ibanga elingenantambo le-Wireless 80 amadesi;
2. Adopt authomathokhi funteenchling umsebenzi we-hopping, umsebenzi 32 amasethi alawulwa kude angenantambo e
ngasikhathi sinye ngaphandle kokuthintanase;
3. Sekela inkinobho yokumisa eziphuthumayo, nangemva kokukhishwa kwesandla kucishiwe, Isimo esiphuthumayo
inkinobho isasebenza;
4. Singatha 6 izinkinobho ngokwezifiso, Shintsha ukuphuma kwesiginali ye-IO;
5. Sekela Ukulawulwa Kwe-6-axis, 7-12 Ukulawulwa kwe-Axis kungenziwa ngokwezifiso;
6. Usekela 1x,10X, 100X Ukulawula futhi kungaba ngcono ngokwezifiso okungu-1000x;
7. Isekela umsebenzi wenkinobho yokuvumela, Ukukhishwa kwe-L0 Sianals. Ukukhetha i-Axis,ukufakwa kwe-maanication
kanye ne-encoder.;
8. Ukukhetha kwe-Axis Ukukhetha nokukhishwa kokukhethwa kwe-Magn Encoder;
9. Sekela i-Type Type Type-C, 5I-V-2A ishaja ukucaciswa, Ukucaciswa kwebhethri okwakhelwe ngaphakathi
14500/1100mAh.

3.Ukucaciswa komkhiqizo

4.Isingeniso somsebenzi wesingeniso

Amanothi：
Inkinobho yokumisa inhloko：
Lapho inkinobho yokuma eziphuthumayo icindezelwa, Imiphumela emibili yokumisa izimo eziphuthumayo ye-IO
owemukelayo uyanqanyulwa, Futhi yonke imisebenzi yakwaManjeel ayisebenzi. Lapho kunesimo esiphuthumayo
Kukhishwe, Ukukhishwa okuphuthumayo okuphuthumayo IO okuphumayo kuvaliwe, Futhi konke kwakha ngesandla
Imisebenzi ibuyiselwe; nangemva kokukhishwa kwesandla kucishiwe, okuphumayo okuphuthumayo okuphumayo
of the receiver is still valid when the emergency stop button is pressed.

Inkinobho ebonakalayo:
Cindezela noma iyiphi yezinkinobho ezinike amandla ezinhlangothini zombili, kanye namaqembu amabili anika amandla io
Imiphumela yokwamukelayo izovulwa. Khipha inkinobho yokunika amandla kanye ne-Io evumela io
okuphumayo kuzocishwa. Ngaphezu kwalokho, Udinga ukucindezela ubambe inkinobho yokunika amandla ngaphambili
Ukushintsha isilinganiso sokukhetha i-axisi nokunikina ngesandla. Lo msebenzi ungaba
canceled through the configuration software.
Ukushintsha kokukhethwa kwe-③axis (ukushintshwa kwamandla):
Cindezela ubambe inkinobho yokunika amandla bese ushintsha ukushintshwa kokukhethwa kwe-axisi ukuze ushintshe
Ukuhambisa i-axis elawulwa yisandla. Shintsha lo shintsho kusuka kunoma iyiphi i-axis futhi
turn on the handwheel power.

④PULSE I-Encoder:
Cindezela ubambe inkinobho yokunika amandla bese unikine i-Encoder ye-Pulse ukuthumela ishayela
signal to control the movement of the machine axis.

Isikhombi se-⑤Battery:
Isibonisi samandla esondo ngesandla, konke okukhanyayo kusho amandla agcwele, konke okukusho akuyona
ivulwe noma ayinamandla, Igridi yokuqala yesobunxele iyakhanya, okubonisa ukuthi amandla aphansi kakhulu,
please charge in time.
Izibani ezi-⑥Signal:
Uma ukukhanya kwesiginali kuvuliwe, Kusho ukuthi i-handwheel iyasebenza futhi isiginali yile
-ngokwejwayelekile; Uma ukukhanya kwesiginali kuvaliwe, Kusho ukuthi akukho kusebenza, noma iyasebenza kepha
the wireless signal is not connected.

5.Umdwebo Wezesekeli Yomkhiqizo

6.Umhlahlandlela Wokufakwa Komkhiqizo

6.1 Izinyathelo Zokufaka Umkhiqizo
1. Faka isitholi kwikhabhinethi kagesi usebenzisa iziqeshana emhlane, noma uyifake
the electrical cabinet using the screw holes at the four corners of the receiver.
2.Bheka umdwebo wethu we-wiring owemukelayo, Qhathanisa nemishini yakho esendaweni, bese uxhuma
the equipment to the receiver via cables.
3.Ngemuva kokuthi owemukelayo elungisiwe, I-antenna ifakwe owemukelayo kumele axhunywe,
Futhi ukuphela kwangaphandle kwe-antenna kumele kufakwe noma kubekwe ngaphandle kwekhabethe kagesi. Yona
Kunconywa ukuyifaka phezulu kwekhabethe kagesi ngomphumela omuhle kakhulu wesiginali. Ikona
kwenqatshelwe ukushiya i-antenna ingavinjelwe noma ibeke i-antenna ngaphakathi kwekhabethe likagesi,
which may cause the signal to be unusable.
4. Ekugcineni, Vula i-Manzi Shintra Power futhi ungasebenza umshini ngo
handwheel remote control.

6.2 Ubukhulu bokufaka

6.3 I-Receiver Wiring Reference Diagram

7.Imiyalo yokusebenza komkhiqizo
1. Umshini unikwa amandla, owemukelayo unikwa amandla, Isikhombi Sokusebenza Samukelayo
ukukhanya okukhanyayo, I-handwheel engenantambo ye-elekthreyili ifakwe ibhethri, Isembozo sebhethri
iboshwe, Ukushintshwa kwamandla angenantambo nge-elekthreel kuvuliwe, kanye
Ukukhanya Kwamandla Wezandla kuvuliwe;
2. Khetha i-axis yokuxhumanisa: Cindezela ubambe inkinobho yokunika amandla, Shintsha ukukhetha kwe-axis
shintsha, bese ukhetha i-axis ofuna ukusebenza kuyo;
3. Khetha Ukukhulisa: Cindezela ubambe inkinobho yokunika amandla, Shintsha ukushintshwa kokukhulisa,
bese ukhetha izinga lokukhulisa oyidingayo;
4. Ukuhambisa i-AXX: Cindezela ubambe inkinobho yokunika amandla, Khetha ukushintshwa kokukhethwa kwe-axisi, qoka
ukushintshaniswa kokukhulisa, Bese kuthi-ke iRotatethe Pulse Encoder ukushintshanisa i-axis enhle eshukumisayo
ngokwewashi kanye ne-axis eshukumisayo embi kakhulu;
5. Cindezela ubambe noma iyiphi inkinobho yangokwezifiso, kanye nenkinobho ehambisanayo ye-IO okuphumayo kwe
owemukelayo uzovulwa. Khipha inkinobho ukucisha okuphumayo;
6. Cindezela inkinobho yokumisa eziphuthumayo, Isimo esiphuthumayo sokuma esiphuthumayo sokuma kwe
owemukelayo uyanqanyulwa, Umsebenzi wesandla ukhubazekile, Khipha ukuma okuphuthumayo
inkinobho, Ukuphuma okuphuthumayo okuphuthumayo IO okuvaliwe kuvaliwe, futhi umsebenzi wesandla uvuthiwe;
7. Uma isandla sesandla singasebenzi isikhathi esithile, izongena ngokuzenzakalelayo ukulala
Imodi yokunciphisa ukusetshenziswa kwamandla. Lapho isetshenziswa futhi, Isandla singaba
icushiwe ngokucindezela inkinobho ye-Nivable;
8. Uma isandla sesandla asisetshenziswa isikhathi eside,Kunconywa ukushintsha i-handwheel
shaft esimweni sokuphumula, cisha amandla esandla, and extend the battery life.

8.Incazelo yemodeli yomkhiqizo

① ：I-DWGP imele isitayela sokubukeka

② ：Amapharamitha okukhishwa kwe-Pulse:
01: Kukhombisa ukuthi amasiginali okuphuma kwe-pulse angu-a no b, kanye ne-volse voltage ingu-5v; Ukushaya komthambo
Inani le-100pppr;
02: Kukhombisa ukuthi amasiginali okuphuma kwe-pulse angu-a no b, kanye ne-voltage voltage ingu-12v; Ukushaya komthambo
Inani le-25PPR;
03: Kukhombisa ukuthi isinali yokuphuma kwe-pulse yi-b、A-、B-； I-Pulse Voltage 5v; Pulse quantity 1
00I-PPR;
04: Kukhombisa okukhishwe okuphezulu kwe-NPN okuvulekile kwe-NPN, ngezimpawu zokuphuma ze-pulse ze-a no b; le khasi
Inani lama-puls yi-100ppp;05: Kubonisa okuphumayo kwe-PNP ye-PNP, amasiginali okuphuma kwe-Pulse
are a no b; I-Pulse Ubungako yi-100ppp;
③ : imele inani lokushintshana kokukhethwa kwe-axisi, 6 imele 6 I-aksizi, 7 imele 7 axis.
④ : imele uhlobo lwe-axisi yokukhetha switch switch, Isiginali yokuphuma ekhomba iphuzu,
B imele isinali yokukhipha okufakiwe;

⑤ : imele uhlobo lwe-magnification switch stan,
Isiginali yokuphuma ekhomba iphuzu, B imele isinali yokukhipha okufakiwe;
⑥ : imele inani lezinkinobho ezingokwezifiso, 6 imele 6 izinkinobho ngokwezifiso;
⑦ : imele ukunikezwa kwamandla kwesandla sohlelo, 05 imele ukunikezwa kwamandla we-5V,
na- 24 represents 24V power supply.

9.Ukuxazulula inkinga yomkhiqizo

10. Ukulungiswa nokunakekelwa

1. Sicela uyisebenzise endaweni eyomile ekushiseni kwegumbi kanye nengcindezi yokwengeza impilo yayo yenkonzo;
2. Sicela ugweme ukusebenzisa ezindaweni ezingajwayelekile njengama-bubble emvula namanzi ukuze unwebe impilo yenkonzo;
3. Sicela ugcine ukubonakala kwesandla esihlanzekile ukwelula impilo yayo yenkonzo;
4. Sicela ugweme ukuncipha, ukuwa, lapho kuqhuma, njll. Ukuvimbela ukulimala kwezinto ezinembile ngaphakathi
amaphutha noma ukunemba amaphutha;
5. Uma kungasetshenziswanga isikhathi eside, Sicela ugcine i-handwheel endaweni ehlanzekile nephephile;
6.Ngesikhathi sokugcina nokuhamba, attention should be paid to moisture and shock resistance.

11.Imininingwane Yezokuphepha

1. Sicela ufunde imiyalo ngokucophelela ngaphambi kokusebenzisa futhi wenqabe ongeyena ochwepheshe ekusebenzeni;
2. Lapho izinga lebhethri liphansi kakhulu, ngicela ukhokhise ngesikhathi ukugwema amaphutha abangelwa awanele
Ibhethri nokungakwazi ukusebenzisa i-handwheel;

3. Uma ukulungiswa kudingeka, Sicela uxhumane nomenzi. Uma umonakalo ubangelwa ukuzilungisa, the manufacturer will not provide warranty.

Isifanekiso：ATWGP-12

Uhlelo lokuguqulwa: Zonke izinhlelo ze-CNC ezinesikhombimsebenzisi esibonakalayo

Lo mkhiqizo yi-Manual Pulse Generator esetshenziswa ngamathuluzi omshini we-CNC. Isetshenziswe kahle emasimini afana namathuluzi omshini we-CNC, I-CNC Lages, Izikhungo zemishini,Imishini yokuqopha kanye nemishini yokugaya. Lo mkhiqizo usebenzisa i-arvirttechnology engenantambo, Ukuqeda Isidingo Sokuxhumeka Kwemine Yesintu Yentwasahlobo, Ukwehluleka okunciphisiwe okubangelwa izintambo, Ukuqeda ukuhudula ikhebula, Amafutha nokunye ukungcoliswa, nokwenza ukusebenza kube lula ngokwengeziwe. Iphakheji yomkhiqizo ifaka owemukelayo kanye ne-wireless electronic handwwheel. Owemukelayo uxhumeke kwimishini ye-CNC ngentambo yenethiwekhi, kanye ne-electronic handwwheel (generator generator) ixhunyiwe futhi yaxhumana nomuntu owemukelayo ngobuchwepheshe bokuhambisa okungenantambo. U-opharetha ubamba isandla futhi angasusa izingqinamba zokuxhumeka zocingo lwentwasahlobo futhi zihambe ngokukhululeka. Okwe-gantry gantry enkulu, I-CNC Lages, Amathuluzi Womshini Wokuhamba, ukusika nezinye izinhlelo zokusebenza, it brings great convenience and improves work efficiency.

Usekela izinhlobo ezahlukahlukene zohlelo ezinjenge-Nokia, Mitsubishi, Unonandela, Taiwanxindai, I-baoyaan, Umntwana, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Kusetshenziswa ibhendi yokuxhumana ye-433mhz, ibanga elingenantambo lokusebenza yilona 40 amadesi;
2. Amushele umsebenzi we-othomathikhi we-hopping umsebenzi futhi usebenzise 32 amasethi e-wireless handwheels ngasikhathi sinye ngaphandle kokuthintanase;
3. Isekela inkinobho yokumisa eziphuthumayo futhi 3 inkinobho yangokwezifiso ukuphuma;
4. Isekela ukukhetha okuningi kwe-axis ye-6-axis, 7-I-aksizi, 8-I-aksizi, 9-I-aksizi, 10-I-Axis ne-12-axis, Ngama-magnivalifienification ama-3 nokukhethwa okusheshayo okungu-4.axis nokushintsha kokukhulisa ukusekela izinhlobo ezahlukahlukene zesiginali njengokufakwa kanambambili, point-to-point, Ikhodi empunga, njll.;
5. Isekela isinali yokuhlukanisa i-5V, 24V Pulse Signal nezinye izinhlobo zesiginali;
6. Idizayini yokusebenzisa amandla ephansi, 2 Amabhethri e-AA angasetshenziswa okungaphezulu kwe 1 inyanga;
7. Isekela i-antenna yangaphandle yangaphandle, Ilungele izindawo ezahlukahlukene zokufaka ithuluzi, Ukuqinisekisa ukuqina kwesiginali;

Incwajana:
1. Isimo senkomba yesimo:
Ukukhanya kwesiginali (-bunxele): Ukukhanya kwesiginali kuhlala kuqhubeka lapho kusebenza i-handwheelis, futhi ayikukhanyi lapho ingasebenzi;
Ukukhanya okuphansi kwe-alamu (ngakwesokudla): Lapho amandla ebhethri aphansi kakhulu,Ukukhanya kwe-alamu kukhanya noma kuhlala kuvuliwe;
2. Nika amandla Inkinobho:
Ngemuva kokucindezela nokubamba inkinobho yokunika amandla, Ukukhetha i-axisi kanye namasiginali wokukhulisa ayasebenza, kanye nokukhishwa kwe-pulse encoder kuvumelekile;
3. Inkinobho yangokwezifiso:
Inkinobho ngaphandle komsebenzi ongalawula ukuphuma okuhambisanayo komukeli;

Com1: I-terminal ejwayelekile yokuphuma kokukhishwa kwe-axis aclex magnal; ingaxhunywa ku-0-24V Public Signal
Coma: Ukuphela okujwayelekile kwe 3 Ukuphuma kwenkinobho yangokwezifiso;

*Ukukhetha kwe-Axisi nokukhulisa kungakhethwa nge-software, ukufaka amakhodi noma iphuzu-to-point, Sicela uxhumane nabasebenzi ngemininingwane

The final interpretation right of this product belongs to our company.

1.Ukwethulwa kokulawula okukude

A.Product comiphik
I-Nokia real-time coodigneise Shond Wireless Electronic Handwwheel iqukethe izingxenye ezimbili: I-Electronic handwwheel kagesi + owemukelayo;

B.Charoctistints

*6 izinkinobho ngokwezifiso zingalawula 6 shintsha okuphumayo;
*Isikrini sokubonisa sibonisa inani lokuhlanganisa irejista elihambisanayo le-PLC ngesikhathi sangempela, and supports 6-axis display of real-time coordinates.

2.Inkambu yesicelo

1) I-elekthronikhi handwwheel ixhumeke ku-PLC nge-Ethernet Receiver

A.Isandla esidlulisa idatha esemqoka ngaphandle kwentambo kwamukeli, Futhi owamukelayo ubhala okhiye nge-Network Cable PLC System Area; Otholayo ufunda imininingwane ezokhonjiswa endaweni ekhethiwe ye-DB, bese ibuyisa imininingwane esikrinini sokubonisa esiseduze. Umsebenzisi angenza ngokwezifiso ikheli lesisekelo lokufunda nokubhala indawo ye-DB e-handwheel, so that the handwheel can read and write the data in the DB area of the PLC.

b. Owemukelayo asekela umthethonqubo we-Motoron S7. Kusebenza ku-PLC S7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

Kumodi yeseva, Umsebenzisi ulungiselela i-PLC Funda futhi ubhale ikheli nge-Software Yokucushwa kwe-WGP-ETS;Sebenzisa ithuluzi lokucushwa kwe-PLC ukumisa ukwamukela kwimodi yekhasimende. Ngemuva kokucushwa, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Isicelo esithile

Ukusetshenziswa okukhethekile komukeli wezandla kanye ne-Nokia PLC S7-200:

a. Inkinobho e-handweel ihambelana nenani lendawo ye-bool ebekwe ngumsebenzisi ku-PLC. Uma inkinobho yesandla icindezelwa, Indawo ehambisanayo ye-bool iyiqiniso, futhi lapho ikhishwa, Kungamanga, futhi ikheli lesisekelo lendawo ye-bool lingasetwa nge-handwheel;

b. Isandla sikwazi ukufunda inani lendawo ye-DB ku-PLC. I-axis eyodwa inayo 4 ama-byte wedatha yokubonisa, na- 6 izimbazo zinezonke 24 ama-byte. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Isingeniso Sokubukeka

5.Incazelo ye-terminal ebulalayo netafula lokufaka amakhodi

6.Usayizi wokubukeka

Uhlelo lokuguqulwa: Zonke izinhlelo ze-CNC ezinesikhombimsebenzisi esibonakalayo

Lo mkhiqizo yi-Manual Pulse Generator esetshenziswa ngamathuluzi omshini we-CNC. Isetshenziswe kahle emasimini afana namathuluzi omshini we-CNC, I-CNC Lages, Izikhungo zemishini,Imishini yokuqopha kanye nemishini yokugaya. Lo mkhiqizo usebenzisa i-arvirttechnology engenantambo, Ukuqeda Isidingo Sokuxhumeka Kwemine Yesintu Yentwasahlobo, Ukwehluleka okunciphisiwe okubangelwa izintambo, Ukuqeda ukuhudula ikhebula, Amafutha nokunye ukungcoliswa, nokwenza ukusebenza kube lula ngokwengeziwe. Iphakheji yomkhiqizo ifaka owemukelayo kanye ne-wireless electronic handwwheel. Owemukelayo uxhumeke kwimishini ye-CNC ngentambo yenethiwekhi, kanye ne-electronic handwwheel (generator generator) ixhunyiwe futhi yaxhumana nomuntu owemukelayo ngobuchwepheshe bokuhambisa okungenantambo. U-opharetha ubamba isandla futhi angasusa izingqinamba zokuxhumeka zocingo lwentwasahlobo futhi zihambe ngokukhululeka. Okwe-gantry gantry enkulu, I-CNC Lages, Amathuluzi Womshini Wokuhamba, ukusika nezinye izinhlelo zokusebenza, it brings great convenience and improves work efficiency.

Usekela izinhlobo ezahlukahlukene zohlelo ezinjenge-Nokia, Mitsubishi, Unonandela, Taiwanxindai, I-baoyaan, Umntwana, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Kusetshenziswa ibhendi yokuxhumana ye-433mhz, ibanga elingenantambo lokusebenza yilona 40 amadesi;
2. Amushele umsebenzi we-othomathikhi we-hopping umsebenzi futhi usebenzise 32 amasethi e-wireless handwheels ngasikhathi sinye ngaphandle kokuthintanase;
3. Isekela inkinobho yokumisa eziphuthumayo futhi 3 inkinobho yangokwezifiso ukuphuma;
4. Isekela ukukhetha okuningi kwe-axis ye-6-axis, 7-I-aksizi, 8-I-aksizi, 9-I-aksizi, 10-I-Axis ne-12-axis, Ngama-magnivalifienification ama-3 nokukhethwa okusheshayo okungu-4.axis nokushintsha kokukhulisa ukusekela izinhlobo ezahlukahlukene zesiginali njengokufakwa kanambambili, point-to-point, Ikhodi empunga, njll.;
5. Isekela isinali yokuhlukanisa i-5V, 24V Pulse Signal nezinye izinhlobo zesiginali;
6. Idizayini yokusebenzisa amandla ephansi, 2 Amabhethri e-AA angasetshenziswa okungaphezulu kwe 1 inyanga;
7. Isekela i-antenna yangaphandle yangaphandle, Ilungele izindawo ezahlukahlukene zokufaka ithuluzi, Ukuqinisekisa ukuqina kwesiginali;

Incwajana:
1. Isimo senkomba yesimo:
Ukukhanya kwesiginali (-bunxele): Ukukhanya kwesiginali kuhlala kuqhubeka lapho kusebenza i-handwheelis, futhi ayikukhanyi lapho ingasebenzi;
Ukukhanya okuphansi kwe-alamu (ngakwesokudla): Lapho amandla ebhethri aphansi kakhulu,Ukukhanya kwe-alamu kukhanya noma kuhlala kuvuliwe;
2. Nika amandla Inkinobho:
Ngemuva kokucindezela nokubamba inkinobho yokunika amandla, Ukukhetha i-axisi kanye namasiginali wokukhulisa ayasebenza, kanye nokukhishwa kwe-pulse encoder kuvumelekile;
3. Inkinobho yangokwezifiso:
Inkinobho ngaphandle komsebenzi ongalawula ukuphuma okuhambisanayo komukeli;

Com1: I-terminal ejwayelekile yokuphuma kokukhishwa kwe-axis aclex magnal; ingaxhunywa ku-0-24V Public Signal
Coma: Ukuphela okujwayelekile kwe 3 Ukuphuma kwenkinobho yangokwezifiso;

*Ukukhetha kwe-Axisi nokukhulisa kungakhethwa nge-software, ukufaka amakhodi noma iphuzu-to-point, Sicela uxhumane nabasebenzi ngemininingwane

The final interpretation right of this product belongs to our company.